Konfig - TP-Link WDR 3600 mit Openwrt hinter Fritzbox 7320

2013/10/12 20:16:17 982280 r hd01 [mouse] card initializing error
2013/10/12 20:19:37 930EF8 h hd01 [mouse] Restarting reader
2013/10/12 20:19:37 930EF8 h hd01 [mouse] creating thread for device /dev/hdplus
2013/10/12 20:19:37 92F358 r hd01 [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=368, cardmhz=368)
2013/10/12 20:19:38 92F358 r hd01 [mouse] card detected
2013/10/12 20:19:41 92F358 r hd01 [mouse] Error activating card.

[reader]
label = hd01
protocol = mouse
device = /dev/hdplus
caid = 1830
boxkey = AxxxC
rsakey = Bxxx5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2

udev_enable = 1
udev_count = 2

SERIAL1 = A601Y6E7
DEVICE1 = /dev/erster

SERIAL2 = A901LLVX
DEVICE2 = /dev/hdplus

[global]
logfile = /tmp/oscam.log
disableuserfile = 0
usrfileflag = 1
fallbacktimeout = 2000
nice = -1
maxlogsize = 500
usrfile = /tmp/Usrfile.log
ecmfmt = c&p/i/s/l

[cccam]
port = 78548
version = 2.3.0
reshare = 1

[monitor]
port = 1000
nocrypt = 127.0.0.1,192.168.10.41
monlevel = 4

[webif]
httpport = 2567
httpuser = xx
httppwd = xx
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255

[ 0.000000] Linux version 3.3.8 (derdigge@skynet) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #4 Tue Apr 30 15:52:25 CEST 2013
[ 0.000000] MyLoader: sysp=b3a3d853, boardp=492118fc, parts=f35d1cdf
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.00 0MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00008000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00008000
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 802f1130, node_mem_map 8100000 0
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 32512
[ 0.000000] Kernel command line: board=TL-WDR4300 console=ttyS0,115200 rootf stype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 126464k/131072k available (2216k kernel code, 4608k reser ved, 413k data, 212k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, No des=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 512
[ 0.080000] NET: Registered protocol family 16
[ 0.080000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
[ 0.090000] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
[ 0.090000] registering PCI controller with io_map_base unset
[ 0.310000] bio: create slab <bio-0> at 0
[ 0.310000] PCI host bridge to bus 0000:00
[ 0.320000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.320000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.330000] pci 0000:00:00.0: [168c:0033] type 0 class 0x000280
[ 0.330000] pci 0000:00:00.0: invalid calibration data
[ 0.330000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0001ffff 64bit]
[ 0.330000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.330000] pci 0000:00:00.0: supports D1
[ 0.330000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.330000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bi t]
[ 0.340000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref ]
[ 0.340000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.350000] Switching to clocksource MIPS
[ 0.350000] NET: Registered protocol family 2
[ 0.360000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.360000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.370000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.370000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.380000] TCP reno registered
[ 0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.390000] NET: Registered protocol family 1
[ 0.400000] PCI: CLS 0 bytes, default 32
[ 0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.420000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY ) (c) 2001-2006 Red Hat, Inc.
[ 0.430000] msgmni has been set to 247
[ 0.430000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 54)
[ 0.440000] io scheduler noop registered
[ 0.440000] io scheduler deadline registered (default)
[ 0.450000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.480000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.490000] console [ttyS0] enabled, bootconsole disabled
[ 0.500000] m25p80 spi0.0: found en25q64, expected m25p80
[ 0.510000] m25p80 spi0.0: en25q64 (8192 Kbytes)
[ 0.510000] 5 tp-link partitions found on MTD device spi0.0
[ 0.520000] Creating 5 MTD partitions on "spi0.0":
[ 0.520000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.530000] 0x000000020000-0x00000010a644 : "kernel"
[ 0.530000] mtd: partition "kernel" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only
[ 0.550000] 0x00000010a644-0x0000007f0000 : "rootfs"
[ 0.550000] mtd: partition "rootfs" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only
[ 0.570000] mtd: partition "rootfs" set to be root filesystem
[ 0.570000] mtd: partition "rootfs_data" created automatically, ofs=3E0000, l en=410000
[ 0.580000] 0x0000003e0000-0x0000007f0000 : "rootfs_data"
[ 0.590000] 0x0000007f0000-0x000000800000 : "art"
[ 0.590000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.730000] ag71xx_mdio: probed
[ 0.730000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[ 1.310000] eth0: Atheros AR8327 switch driver attached.
[ 2.470000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid= 004dd033, driver=Atheros AR8216/AR8236/AR8316]
[ 2.490000] TCP cubic registered
[ 2.490000] NET: Registered protocol family 17
[ 2.490000] Bridge firewalling registered
[ 2.500000] 8021q: 802.1Q VLAN Support v1.8
[ 2.510000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.520000] Freeing unused kernel memory: 212k freed
[ 4.200000] Registered led device: tp-link:blue:qss
[ 4.200000] Registered led device: tp-link:blue:system
[ 4.200000] Registered led device: tp-link:green:usb1
[ 4.200000] Registered led device: tp-link:green:usb2
[ 4.200000] Registered led device: tp-link:blue:wlan2g
[ 5.470000] eth0: link up (1000Mbps/Full duplex)
[ 7.440000] JFFS2 notice: (504) jffs2_build_xattr_subsystem: complete buildin g xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 22 of xref (0 dead, 8 orphan) found.
[ 7.600000] eth0: link down
[ 8.930000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[ 8.940000] Backport based on wireless-testing.git master-2013-02-22
[ 8.940000] compat.git: wireless-testing.git
[ 8.970000] cfg80211: Calling CRDA to update world regulatory domain
[ 8.970000] cfg80211: World regulatory domain updated:
[ 8.980000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 8.990000] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (N/A, 3000 m Bm)
[ 8.990000] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 m Bm)
[ 9.410000] usbcore: registered new interface driver usbfs
[ 9.420000] usbcore: registered new interface driver hub
[ 9.450000] usbcore: registered new device driver usb
[ 9.970000] ath: EEPROM regdomain: 0x0
[ 9.970000] ath: EEPROM indicates default country code should be used
[ 9.970000] ath: doing EEPROM country->regdmn map search
[ 9.970000] ath: country maps to regdmn code: 0x3a
[ 9.970000] ath: Country alpha2 being used: US
[ 9.970000] ath: Regpair used: 0x3a
[ 9.980000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.980000] Registered led device: ath9k-phy0
[ 9.980000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[ 9.990000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 10.000000] ath: EEPROM regdomain: 0x0
[ 10.000000] ath: EEPROM indicates default country code should be used
[ 10.000000] ath: doing EEPROM country->regdmn map search
[ 10.000000] ath: country maps to regdmn code: 0x3a
[ 10.000000] ath: Country alpha2 being used: US
[ 10.000000] ath: Regpair used: 0x3a
[ 10.000000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 10.010000] Registered led device: ath9k-phy1
[ 10.010000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[ 10.020000] cfg80211: Calling CRDA for country: US
[ 10.020000] cfg80211: Regulatory domain changed to country: US
[ 10.030000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 10.040000] cfg80211: (2402000 KHz - 2494000 KHz @ 40000 KHz), (N/A, 3000 m Bm)
[ 10.040000] cfg80211: (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 m Bm)
[ 10.150000] PPP generic driver version 2.4.2
[ 10.330000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.420000] NET: Registered protocol family 24
[ 10.430000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.440000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 10.450000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 10.490000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 10.510000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 10.510000] hub 1-0:1.0: USB hub found
[ 10.520000] hub 1-0:1.0: 1 port detected
[ 10.540000] nf_conntrack version 0.5.0 (1979 buckets, 7916 max)
[ 10.710000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.810000] usbcore: registered new interface driver usbserial
[ 10.810000] USB Serial support registered for generic
[ 10.840000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 10.990000] hub 1-1:1.0: USB hub found
[ 10.990000] hub 1-1:1.0: 4 ports detected
[ 11.000000] usbcore: registered new interface driver usbserial_generic
[ 11.000000] usbserial: USB Serial Driver core
[ 11.020000] USB Serial support registered for FTDI USB Serial Device
[ 11.030000] usbcore: registered new interface driver ftdi_sio
[ 11.030000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 14.060000] eth0: link up (1000Mbps/Full duplex)
[ 14.360000] eth0: link down
[ 14.370000] device eth0.1 entered promiscuous mode
[ 14.380000] device eth0 entered promiscuous mode
[ 15.070000] eth0: link up (1000Mbps/Full duplex)
[ 15.090000] br-lan: port 1(eth0.1) entered forwarding state
[ 15.090000] br-lan: port 1(eth0.1) entered forwarding state
[ 17.090000] br-lan: port 1(eth0.1) entered forwarding state
[ 211.950000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[ 212.060000] hub 1-1.1:1.0: USB hub found
[ 212.060000] hub 1-1.1:1.0: 4 ports detected
[ 212.360000] usb 1-1.1.2: new full-speed USB device number 4 using ehci-platfo rm
[ 212.470000] ftdi_sio 1-1.1.2:1.0: FTDI USB Serial Device converter detected
[ 212.480000] usb 1-1.1.2: Detected FT232RL
[ 212.490000] usb 1-1.1.2: Number of endpoints 2
[ 212.490000] usb 1-1.1.2: Endpoint 1 MaxPacketSize 16384
[ 212.500000] usb 1-1.1.2: Endpoint 2 MaxPacketSize 16384
[ 212.500000] usb 1-1.1.2: Setting MaxPacketSize 64
[ 212.520000] usb 1-1.1.2: FTDI USB Serial Device converter now attached to tty USB0
[ 212.600000] usb 1-1.1.4: new high-speed USB device number 5 using ehci-platfo rm
[ 212.710000] hub 1-1.1.4:1.0: USB hub found
[ 212.710000] hub 1-1.1.4:1.0: 4 ports detected

drwxr-xr-x 5 root root 1100 Oct 12 20:49 .
drwxr-xr-x 1 root root 0 Jan 1 1970 ..
drwxr-xr-x 3 root root 60 Oct 12 20:45 bus
crw-r--r-- 1 root root 5, 1 Jan 1 1970 console
crw-rw-rw- 1 root root 1, 7 Jan 1 1970 full
lrwxrwxrwx 1 root root 12 Oct 12 20:49 hdplus -> /dev/ttyUSB0
crw-r--r-- 1 root root 1, 11 Jan 1 1970 kmsg
srw-rw-rw- 1 root root 0 Oct 12 20:45 log
crw-r--r-- 1 root root 1, 1 Jan 1 1970 mem
crw-r--r-- 1 root root 90, 0 Jan 1 1970 mtd0
crw-r--r-- 1 root root 90, 1 Jan 1 1970 mtd0ro
crw-r--r-- 1 root root 90, 2 Jan 1 1970 mtd1
crw-r--r-- 1 root root 90, 3 Jan 1 1970 mtd1ro
crw-r--r-- 1 root root 90, 4 Jan 1 1970 mtd2
crw-r--r-- 1 root root 90, 5 Jan 1 1970 mtd2ro
crw-r--r-- 1 root root 90, 6 Jan 1 1970 mtd3
crw-r--r-- 1 root root 90, 7 Jan 1 1970 mtd3ro
crw-r--r-- 1 root root 90, 8 Jan 1 1970 mtd4
crw-r--r-- 1 root root 90, 9 Jan 1 1970 mtd4ro
crw-r--r-- 1 root root 90, 10 Jan 1 1970 mtd5
crw-r--r-- 1 root root 90, 11 Jan 1 1970 mtd5ro
brw-r--r-- 1 root root 31, 0 Jan 1 1970 mtdblock0
brw-r--r-- 1 root root 31, 1 Jan 1 1970 mtdblock1
brw-r--r-- 1 root root 31, 2 Jan 1 1970 mtdblock2
brw-r--r-- 1 root root 31, 3 Jan 1 1970 mtdblock3
brw-r--r-- 1 root root 31, 4 Jan 1 1970 mtdblock4
brw-r--r-- 1 root root 31, 5 Jan 1 1970 mtdblock5
crw-rw-rw- 1 root root 1, 3 Jan 1 1970 null
crw-r--r-- 1 root root 1, 4 Jan 1 1970 port
crw------- 1 root root 108, 0 Oct 12 20:45 ppp
crw-rw-rw- 1 root root 5, 2 Oct 12 20:50 ptmx
drwxr-xr-x 2 root root 0 Jan 1 1970 pts
crw-r--r-- 1 root root 1, 8 Jan 1 1970 random
drwxr-xr-x 2 root root 40 Jan 1 1970 shm
crw-rw-rw- 1 root root 5, 0 Jan 1 1970 tty
crw-rw-rw- 1 root root 4, 64 Jan 1 1970 ttyS0
crw-rw-rw- 1 root root 4, 65 Jan 1 1970 ttyS1
crw-rw-rw- 1 root root 4, 74 Jan 1 1970 ttyS10
crw-rw-rw- 1 root root 4, 75 Jan 1 1970 ttyS11
crw-rw-rw- 1 root root 4, 76 Jan 1 1970 ttyS12
crw-rw-rw- 1 root root 4, 77 Jan 1 1970 ttyS13
crw-rw-rw- 1 root root 4, 78 Jan 1 1970 ttyS14
crw-rw-rw- 1 root root 4, 79 Jan 1 1970 ttyS15
crw-rw-rw- 1 root root 4, 66 Jan 1 1970 ttyS2
crw-rw-rw- 1 root root 4, 67 Jan 1 1970 ttyS3
crw-rw-rw- 1 root root 4, 68 Jan 1 1970 ttyS4
crw-rw-rw- 1 root root 4, 69 Jan 1 1970 ttyS5
crw-rw-rw- 1 root root 4, 70 Jan 1 1970 ttyS6
crw-rw-rw- 1 root root 4, 71 Jan 1 1970 ttyS7
crw-rw-rw- 1 root root 4, 72 Jan 1 1970 ttyS8
crw-rw-rw- 1 root root 4, 73 Jan 1 1970 ttyS9
crw-rw-rw- 1 root root 188, 0 Oct 12 20:49 ttyUSB0
crw-r--r-- 1 root root 1, 9 Jan 1 1970 urandom
crw-r--r-- 1 root root 10, 130 Oct 12 20:45 watchdog
crw-rw-rw- 1 root root 1, 5 Jan 1 1970 zero

root@OpenWrt:~# oscam stop

Oscam wird beendet!

sh: can't kill pid 3021: No such process
root@OpenWrt:~# ps ax | grep oscam
ps: invalid option -- a
BusyBox v1.19.4 (2013-04-30 14:35:20 CEST) multi-call binary.

Usage: ps

Show list of processes

w Wide output