KD mit G09: Card needs pairing/extra data

[omipo]

Hallo,

ich habe oscam (cygwin-svn-10660) am laufen und greife über Hadu & cccam auf meine G09-Karte zu.

Bis vor kurzem lief das einwandfrei, dann nicht mehr mit der Meldung:

[18.07.2015 19:05:00] - 19:05:00 8005A1A0 r (reader) KDG0x [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
[18.07.2015 19:05:00] - 19:05:00 8005A1A0 r (reader) KDG0x [videoguard2] classD3 ins54: no cw --> Tier expired
[18.07.2015 19:05:00] - 19:05:00 8005DD30 c (ecm) user1 (09C7&000000/0022/C362/5E:E9A..........................BDE): not found (319 ms) by KDG0x

Ich habe absolut keine Ahnung, was ich nun tun kann. Ich nutze als Hardware die easymouse 2 an einem HTPC.

Hier der komplette Log:

Spoiler

[18.07.2015 18:59:03] - Starting "oscam.exe"...
[18.07.2015 18:59:03] - Oscam is running!
[18.07.2015 18:59:03] - Next restart at 19.07.2015 06:00:00
[18.07.2015 18:59:03] - 18:59:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10648 (i686-pc-cygwin)
[18.07.2015 18:59:03] - 18:59:03 0 s (main) System name = CYGWIN_NT-6.1-WOW64
[18.07.2015 18:59:03] - 18:59:03 0 s (main) Host name = nuc
[18.07.2015 18:59:03] - 18:59:03 0 s (main) Release = 1.7.18(0.263/5/3)
[18.07.2015 18:59:03] - 18:59:03 0 s (main) Version = 2013-04-19 10:39
[18.07.2015 18:59:03] - 18:59:03 0 s (main) Machine = i686
[18.07.2015 18:59:03] - 18:59:03 0 s (main) creating pidfile /cygdrive/c/Users/anjaalex/AppData/Local/Temp/_oscam/oscam.pid with pid 4812
[18.07.2015 18:59:03] - 18:59:03 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
[18.07.2015 18:59:03] - 18:59:03 0 s (main) signal handling initialized
[18.07.2015 18:59:03] - 18:59:03 0 s (net) monitor: initialized (fd=3, port=988)
[18.07.2015 18:59:03] - 18:59:03 0 s (net) cccam: initialized (fd=4, port=10003)
[18.07.2015 18:59:03] - 18:59:03 0 s (reader) KDG0x [mouse] creating thread for device /dev/ttyS2
[18.07.2015 18:59:03] - 18:59:03 0 s (stat) loadbalancer: can't read from file /cygdrive/c/Users/anjaalex/AppData/Local/Temp/_oscam/stat
[18.07.2015 18:59:03] - 18:59:03 0 s (main) waiting for local card init
[18.07.2015 18:59:03] - 18:59:03 80057D48 h (webif) webif: decompressed 159660 bytes back into 382384 bytes
[18.07.2015 18:59:03] - 18:59:03 80057D48 h (webif) HTTP Server running. ip=0.0.0.0 port=3001
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Buffers readed 0 bytes total time_us 90000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 1 value 03 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 2 value 40 time_us 30000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 3 value 77 time_us 10000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 4 value 5b time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 5 value bf time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 6 value f5 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 7 value ff time_us 10000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 8 value 3f time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 9 value 33 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 10 value f2 time_us 10000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 11 value 57 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 12 value 69 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 13 value 00 time_us 10000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 14 value ad time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 15 value f5 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 16 value f0 time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 17 value fe time_us 10001
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 18 value 3f time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 19 value 2d time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 20 value cd time_us 10000
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 21 value 3f time_us 0
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Buffers readed 21 bytes total time_us 180001
[18.07.2015 18:59:03] - 18:59:03 8005A1A0 r (reader) KDG0x [mouse] Reader initialized (device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
[18.07.2015 18:59:04] - 18:59:04 8005A1A0 r (reader) KDG0x [mouse] card detected
[18.07.2015 18:59:04] - 18:59:04 8005A1A0 r (reader) KDG0x [mouse] Buffers readed 0 bytes total time_us 90000
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] ATR: 3F ......................... 03
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Setting baudrate to 9600 bps
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Calculated work ETU is 104.20 us reader mhz = 357
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 1 value 03 time_us 20000
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 2 value 40 time_us 0
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 3 value 77 time_us 20000
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 4 value 5b time_us 0
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 5 value bf time_us 0
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 6 value f5 time_us 10000
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 7 value ff time_us 0
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 8 value 3f time_us 0
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 9 value 33 time_us 0
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 10 value f2 time_us 10000
[18.07.2015 18:59:05] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 11 value 57 time_us 0
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 12 value 69 time_us 0
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 13 value 00 time_us 10001
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 14 value ad time_us 0
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 15 value f5 time_us 0
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 16 value f0 time_us 10000
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 17 value fe time_us 0
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 18 value 3f time_us 0
[18.07.2015 18:59:06] - 18:59:05 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 19 value 2d time_us 0
[18.07.2015 18:59:06] - 18:59:06 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 20 value cd time_us 10000
[18.07.2015 18:59:06] - 18:59:06 8005A1A0 r (reader) KDG0x [mouse] Flush readed byte Nr 21 value 3f time_us 0
[18.07.2015 18:59:06] - 18:59:06 8005A1A0 r (reader) KDG0x [mouse] Buffers readed 21 bytes total time_us 180001
[18.07.2015 18:59:06] - 18:59:06 8005A1A0 r (reader) KDG0x [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
[18.07.2015 18:59:07] - 18:59:07 8005A1A0 r (reader) KDG0x [mouse] Card type: KLPV
[18.07.2015 18:59:07] - 18:59:07 8005A1A0 r (reader) KDG0x [mouse] Rom version: 10LM
[18.07.2015 18:59:07] - 18:59:07 8005A1A0 r (reader) KDG0x [mouse] Credit available on card: 0 euro
[18.07.2015 18:59:07] - 18:59:07 8005A1A0 r (reader) KDG0x [mouse] FuseByte: 05
[18.07.2015 18:59:07] - 18:59:07 8005A1A0 r (reader) KDG0x [mouse] Region Code:
[18.07.2015 18:59:07] - 18:59:07 8005A1A0 r (reader) KDG0x [mouse] Country Code: DEU
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [mouse] Pincode read: 0353
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [mouse] PCB settings: FF FF FF FF
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [mouse] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [mouse] serial: ########, BoxID: ########, baseyear: 2004
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [mouse] ready for requests
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [mouse] found card system videoguard2
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
[18.07.2015 18:59:08] - 18:59:08 8005A1A0 r (reader) KDG0x [videoguard2] card detected
[18.07.2015 18:59:09] - 18:59:08 8005A1A0 r (reader) KDG0x [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
[18.07.2015 18:59:09] - 18:59:09 8005A1A0 r (reader) KDG0x [videoguard2] ------------------------------------------------------------------
[18.07.2015 18:59:09] - 18:59:09 8005A1A0 r (reader) KDG0x [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
[18.07.2015 18:59:09] - 18:59:09 8005A1A0 r (reader) KDG0x [videoguard2] +---------+----------+---------------------+---------------------+
[18.07.2015 18:59:10] - 18:59:10 8005A1A0 r (reader) KDG0x [videoguard2] ------------------------------------------------------from-ins70--
[18.07.2015 18:59:11] - 18:59:11 0 s (main) init for all local cards done
[18.07.2015 18:59:11] - 18:59:11 0 s (anticasc) anti cascading disabled
[18.07.2015 19:04:56] - 19:04:56 8005DD30 c (client) encrypted cccam-client 127.0.0.1 granted (user1, au=auto (1 reader))
[18.07.2015 19:05:00] - 19:05:00 8005A1A0 r (reader) KDG0x [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
[18.07.2015 19:05:00] - 19:05:00 8005A1A0 r (reader) KDG0x [videoguard2] classD3 ins54: no cw --> Tier expired
[18.07.2015 19:05:00] - 19:05:00 8005DD30 c (ecm) user1 (09C7&000000/0022/C362/5E:E9A..........................BDE): not found (319 ms) by KDG0x

Hier noch meine Configs:
oscam.server:

Spoiler

[reader]
label = KDG0x
protocol = mouse

device = /dev/ttyS2
caid = 09C7
ident = 09C7:000000
boxid = 12345678
ecmwhitelist = 09C7:5D,5E,5F,60,61,62,63,78,79
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
#ins7e11 = 15
#ndsversion = 2

oscam.conf:

Spoiler

[global]
nice = -1
WaitForCards = 1
logfile=stdout
[monitor]
port = 988
aulow = 120
monlevel = 1
[webif]
HttpPort = 3001
HttpUser = xxxxxxxxx
HttpPWD = xxxxxxxxx
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.1-192.168.255.255

#[newcamd]
#key = 0102030405060708091011121314
#port = 10003@1834:000000
[cccam]
port = 10003
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240

oscam.user:

Spoiler

[account]
User = xxxxx
Pwd = xxxxx
Monlevel = 0
Group = 1
AU = 1

hadu.ini:

Spoiler

[General]
PluginActive=1
KeyPath2=
UseTransparency=1
[Options]
UsePSITables=1
SurveyPMT=1
UsePATforPMT=0
DontUpdViewer=0
MaxECMPIDs=0
MaxConnections=0
DisplayIPorURL=1
ECMTimeout=3
MaxCAIDLoops=4
DCWsOneServ=1
LogMessages=0
LogMessLevel=2
EMMAlone=0
EMMFaked=0
EMMLog=0
DispAllEMMs=0
CacheUse=1
CacheUpdate=1
ManualUse=0
Systray=0

[Specific]
DVBViewerAPI=0
DVBViewerAllAudio=1
DVBViewerCSAStat=0
DVBViewerRecServ=0
DVBViewerIdleServ=0
DVBViewerEncrServ=0

[Device]
MDRoot=0
DescrCommand=
XorEven=
XorOdd=
UseTT=0

;[Serv_DVBKING]
;Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
;Active=1

;
; Syntax for a CCCam server
; -------------------------
;
; Server declaration (mandatory):
; [Serv_whateveryouwishforyourservername]
;
; Mandatory parameter for each CCCam server:
; Server=Protocol:Serverort:[EMM allowed]:Usernameassword[:ClientNodeID]
;
; Sample for the 2 former lines:
; [Serv_MyServer]
; Server=CCCam:MyServer.com:12000:0:MyUsername:MyPassword
;
; Optional parameters for each CCCam server:
; Active= ; 0=No, or [1=Yes]
; Timeout= ; 0=None, or 3-7 seconds. Default is [5] seconds
; Version= ; [None], or Version:Build
; PadTime= ; [0=None], or (Timeout+2)-N seconds
; TimeRecon= ; [0=Automatic], or 1-32 seconds
; WantEmus= ; [0=No], or 1=Yes
; MaxHop= ; [0=None], or 1-N
; NonStd= ; [0=Auto], or 1=Yes, 2=No
; CAIDProv= ; [None], or 32 max entries of CAID/Providers
; NoCAIDProv= ; [None], or 32 max entries of CAID/Providers
; NoNodeCAID= ; [None], or 32 max entries of Node/CAIDs
; CAIDTunnel= ; [None], or 32 max entries of CAID/CAID/Provider/SIDs
; NoSID= ; [None], or 64 max entries of SIDs
; PrioGenRules= ; 1 or several general rules for priority. Default is [Hop]
; PrioCAIDProv= ; [None], or 32 max entries of CAID/Providers for priority
; IgnoreProvFor= ; [None], or 32 max entries of CAID
; DontUseProvFor=; [None], or 32 max entries of CAID
; EMMCAID= ; [None], or 2 max entries of CAID/Provider/Options/PID for EMMs
; UseNodeSID= ; 0=No, or [1=Yes]
; OSCAMWa= ; [0=No], or 1=Yes
; OSCAMPartner= ; [0=Auto Test], 1=Force Test OK, or 2=No
; OSCAMExt= ; [0=No], or 1=Yes
; OSCAMSID= ; 0=No, or [1=Yes]
;
[Serv_MyServer]
Server=CCCam:127.0.0.1:10003:0:xxxx:xxxx

Ich danke vielmals für jegliche Hilfe (bin kurz davor, mein HD-Abo bei KD abzumelden....)

Gruß

 

[Derek Buegel]

AW: KD mit G09: Card needs pairing/extra data

Dir macht das Card needs pairing Sorgen?

needs = muss/will/gerne ....

Deine Karte baucht Entis.
Dieser Beitrag währe besser im oscam-Talk aufgehoben!
Bei Kabel kann ich Dir nicht weiter helfen.

MfG

 

[modino2711]

AW: KD mit G09: Card needs pairing/extra data

deine tiers sind abgelaufen !

ins kundencenter einloggen und dann unter:

Mein Kabel -> Fernsehen -> sollte deine karte gelistet sein.

unter Smartcard freischalten freischaltsignal anfordern.

kenn mich jetzt mit Hadu nicht aus, irgendwo muss da ja ein fehler
sein, weil dein AU nicht funktioniert hat.

 

[omipo]

AW: KD mit G09: Card needs pairing/extra data

Vielen Dank.

Hab mal auf RTL HD gestellt und neues Freischaltsignal angefordert, keine Besserung...Auch mit AU = "readerlabel" wirds nicht besser...

 

[Wolke68]

AW: KD mit G09: Card needs pairing/extra data

[reader]
label = G09
description = Kabel Deutschland G09 Karte
protocol = mouse
device = /dev/G09
autospeed = 0
caid = 09C7
boxid = 12345678
boxkey = 1122334455667788
ins7e11 = 15
fix07 = 0
detect = cd
group = 30
emmcache = 1,1,2,0
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
dropbadcws = 1
cccreshare = 1
ndsversion = 2


ich habe zwar kein Hadu aber mein Reader (Easymouse) sieht schon anders aus.
Ich denke auch deine Karte ist abgelaufen und wird nicht oder nicht richtig mit EMM versorgt.

 

[omipo]

AW: KD mit G09: Card needs pairing/extra data

Habe jetzt mal den reader angepasst, leider tut sich noch nix:

Spoiler

[reader]
label = KDG0x
protocol = mouse

device = /dev/ttyS2
#autospeed = 0
caid = 09C7
ident = 09C7:000000
boxid = 12345678
#boxkey = 1122334455667788
ecmwhitelist = 09C7:5D,5E,5F,60,61,62,63,78,79
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
#ins7e11 = 15
#ndsversion = 2


#ins7e11 = 15
#fix07 = 0
#detect = cd
#group = 30
#emmcache = 1,1,2,0
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
dropbadcws = 1
cccreshare = 1
#ndsversion = 2

Was mich total wundert: ich hatte früher eine D09-Karte. Da diese kein HD der RTL-Sender kann, habe ich eine G09 bestellt. Nun steht in meinem KD-Account, dass auf der D09 "Kabel Digital HD" und "Kabel Digital" gebucht ist und auf der aktuell genutzten G09 "Zweitkarte" und "Basis HD". KD behauptet aber, dass "alles auf beiden Karten gebucht sei"....

Danke und beste Grüße