Karte aktivieren

[hanes_mumu]

AW: Karte aktivieren

Was kann ich denn noch an dem Reader ändern. Die Serial ist eingefügt.

 

[dia]

AW: Karte aktivieren

also das funtzt nit

 

[hanes_mumu]

AW: Karte aktivieren

Im Log steht wieder das Selbe. Scheisse

 

[dia]

AW: Karte aktivieren

gehe mal einzeln durch

Spoiler

[reader]
label = v14
protocol = mouse
device = /dev/SKYV14
services =
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Spoiler

[reader]
label = v14
protocol = mouse
device = Serial:Reader 4CA6E0F
smargopatch = 1
services =
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Spoiler

[reader]
label = v14
protocol = smartreader
device = Serial:Reader 4CA6E0F
smargopatch = 1
services =
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[hanes_mumu]

Log

Spoiler

zu #1

2014/09/14 01:27:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6164
2014/09/14 01:27:31 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/09/14 01:27:31 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/14 01:27:31 0 s signal handling initialized
2014/09/14 01:27:31 0 s 227 service-id's loaded in 8ms
2014/09/14 01:27:31 0 s monitor: initialized (fd=6, port=988, ip=192.168.xxx.1)
2014/09/14 01:27:31 0 s cccam: initialized (fd=7, port=xxxxx, ip=192.168.xxx.1)
2014/09/14 01:27:31 0 s v14 [mouse] creating thread for device /dev/SKYV14
2014/09/14 01:27:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/14 01:27:31 0 s anti cascading disabled
2014/09/14 01:27:31 xxxxx r v14 [mouse] ERROR: Opening device /dev/SKYV14 (errno=2 No such file or directory)
2014/09/14 01:27:31 xxxxx r v14 [mouse] Cannot open device: /dev/SKYV14
2014/09/14 01:27:31 xxxxx h webif: decompressed 109020 bytes back into 266180 bytes
2014/09/14 01:27:31 xxxxx h HTTP Server running. ip=192.168.xxx.1 port=83
2014/09/14 01:27:36 xxxxx c encrypted cccam-client

Sie müssen registriert sein, um Links zu sehen.

xx granted (user, au=on (1 reader))
2014/09/14 01:27:37 xxxx c user (098C&000000/025B/0083/98:xxxxxxxxxx): rejected group (0 ms) (no matching reader)
2014/09/14 01:27:44 xxxx c user (098C&000000/025B/0083/98:xxxxxxxxxx): rejected group (1 ms) (no matching reader)


zu#2



2014/09/14 01:28:56 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6176
2014/09/14 01:28:56 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/09/14 01:28:56 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/14 01:28:56 0 s signal handling initialized
2014/09/14 01:28:56 0 s 227 service-id's loaded in 8ms
2014/09/14 01:28:56 0 s monitor: initialized (fd=6, port=988, ip=192.168.xxx.1)
2014/09/14 01:28:56 0 s cccam: initialized (fd=7, port=xxxxx, ip=192.168.xxx.1)
2014/09/14 01:28:56 0 s v14 [mouse] creating thread for device Serial:Reader 4CA6E0F
2014/09/14 01:28:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/14 01:28:56 0 s anti cascading disabled
2014/09/14 01:28:56 xxxxx r v14 [mouse] ERROR: Opening device Serial:Reader 4CA6E0F (errno=2 No such file or directory)
2014/09/14 01:28:56 xxxxx r v14 [mouse] Cannot open device: Serial:Reader 4CA6E0F
2014/09/14 01:28:56 xxxxx h webif: decompressed 109020 bytes back into 266180 bytes
2014/09/14 01:28:56 xxxxx h HTTP Server running. ip=192.168.xxx.1 port=83
2014/09/14 01:29:01 xxxxx c encrypted cccam-client 192.168.xxx.35 granted (user, au=on (1 reader))
2014/09/14 01:29:08 xxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxx): rejected group (0 ms) (no matching reader)
2014/09/14 01:29:15 xxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxx): rejected group (0 ms) (no matching reader)


zu #3


2014/09/14 01:30:12 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6188
2014/09/14 01:30:12 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/09/14 01:30:12 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/14 01:30:12 0 s signal handling initialized
2014/09/14 01:30:12 0 s 227 service-id's loaded in 8ms
2014/09/14 01:30:12 0 s monitor: initialized (fd=6, port=988, ip=192.168.xxx.1)
2014/09/14 01:30:12 0 s cccam: initialized (fd=7, port=xxxxx, ip=192.168.xxx.1)
2014/09/14 01:30:12 0 s v14 [smartreader] creating thread for device Serial:Reader 4CA6E0F
2014/09/14 01:30:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/14 01:30:12 0 s anti cascading disabled
2014/09/14 01:30:12 xxxxx h webif: decompressed 109020 bytes back into 266180 bytes
2014/09/14 01:30:12 xxxxx h HTTP Server running. ip=192.168.xxx.1 port=83
2014/09/14 01:30:17 xxxxx c encrypted cccam-client

Sie müssen registriert sein, um Links zu sehen.

x granted (user, au=on (1 reader))
2014/09/14 01:30:18 xxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxx): rejected group (0 ms) (no matching reader)
2014/09/14 01:30:25 xxxxx c user (098C&000000/025B/0083/xxxxxxxxxxxxx): rejected group (0 ms) (no matching reader)
2014/09/14 01:30:32 xxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxx): rejected group (0 ms) (no matching reader)

Was ist den an der config falsch, er erkennt doch die Karte?
configs

Spoiler

[reader]
label = v14
protocol = smargo
device = /dev/ttyUSB0
services =
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Livelog

Spoiler

• 2014/09/14 01:36:32 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6200
• 2014/09/14 01:36:32 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2014/09/14 01:36:32 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2014/09/14 01:36:32 0 s signal handling initialized
• 2014/09/14 01:36:32 0 s 227 service-id's loaded in 8ms
• 2014/09/14 01:36:32 0 s monitor: initialized (fd=6, port=988, ip=192.168.xxx.1)
• 2014/09/14 01:36:32 0 s cccam: initialized (fd=7, port=xxxxx, ip=192.168.xxx.1)
• 2014/09/14 01:36:32 0 s v14 [smargo] creating thread for device /dev/ttyUSB0
• 2014/09/14 01:36:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/09/14 01:36:32 0 s anti cascading disabled
• 2014/09/14 01:36:32 xxxxxx r v14 [smargo] smargo init type is smargo
• 2014/09/14 01:36:32 xxxxxx h webif: decompressed 109020 bytes back into 266180 bytes
• 2014/09/14 01:36:32 xxxxxx h HTTP Server running. ip=192.168.xxx.1 port=83
• 2014/09/14 01:36:32 xxxxxx r v14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
• 2014/09/14 01:36:33 xxxxxx r v14 [smargo] card detected
• 2014/09/14 01:36:37 xxxxxx r v14 [smargo] ATR: xxxxxxxxxxxxx
• 2014/09/14 01:36:37 xxxxxx r v14 [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2014/09/14 01:36:37 xxxxxx r v14 [smargo] Calculated work ETU is 6.30 us reader mhz = 369
• 2014/09/14 01:36:37 xxxxxx c encrypted cccam-client 192.168.xxx.35 granted (user, au=on (1 reader))
• 2014/09/14 01:36:38 xxxxxx r v14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Card type: xxxx
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Rom version: xxxx
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Credit available on card: 0 euro
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Extended 4C detected
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] FuseByte: 00
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Region Code:
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Country Code: DEU
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] Pincode read: xxxx
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] PCB settings: FF FF FF FF
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] serial: ########, BoxID: ########, baseyear: 2004
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] ready for requests
• 2014/09/14 01:36:39 xxxxxx r v14 [smargo] found card system videoguard2
• 2014/09/14 01:36:39 xxxxxx r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/09/14 01:36:39 xxxxxx r v14 [videoguard2] card detected
• 2014/09/14 01:36:39 xxxxxx r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2014/09/14 01:36:44 xxxxxx r v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/09/14 01:36:44 xxxxxx r v14 [videoguard2] classD3 ins54: no cw --> Card is paired
• 2014/09/14 01:36:44 xxxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxxxxxxx): not found (81 ms) by v14
• 2014/09/14 01:36:51 xxxxxx r v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/09/14 01:36:51 xxxxxx r v14 [videoguard2] classD3 ins54: no cw --> Card is paired
• 2014/09/14 01:36:51 xxxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxxxxxxx): not found (65 ms) by v14
• 2014/09/14 01:36:58 xxxxxx r v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/09/14 01:36:58 xxxxxx r v14 [videoguard2] classD3 ins54: no cw --> Card is paired
• 2014/09/14 01:36:58 xxxxxx c user (098C&000000/025B/0083/98:xxxxxxxxxxxxxxxx): not found (65 ms) by v14

 

[dia]

AW: Karte aktivieren

jetzt sieht es top aus
wenn du alle jetzt richtig hast würde ich morgen früh mal schon ob du emm im ordner hast
wenn ja
kannste freischaltung online machen

 

[hanes_mumu]

AW: Karte aktivieren

ja, aber es steht doch card isn´t active dort. Ganz am Anfang hatte ich die config ähnlich. Wie kann ich denn die Karte jetzt aktiv bekommen?

 

[dia]

AW: Karte aktivieren

in dem du online im kundencenter eine freischaltung holst

bitte nur eine freischeilung

 

[hanes_mumu]

AW: Karte aktivieren

Hatte ich schon online im KC gemacht. Hab ich zu wenig gewartet?
Hatte ich event. den falschen Kanal an?

Blockt meine Cccam in der Azbox die EEm´s, nicht das die Karte sich doch paired.

 

[dia]

AW: Karte aktivieren

schau im webinterface was unter reader bei block emm unter uq=1
was da steht

 

[hanes_mumu]

AW: Karte aktivieren

Hallo, habs zum laufen gekriegt. Den Receiver hab ich über Nacht laufen lassen, morgens hatte ich emm's gespeichert. Diese hab ich mit dem Analysetool geprüft. Zwei waren die Aktivierung und die Verlängerung. Beide emm's auf die Karte gespielt und jetzt ist sie bis 10.01.2015 frei

Danke an euch alle speziell an dia