Kabel BW Karte im OSCam einpflegen

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

Spoiler

2015/01/06 23:20:28 0 s >> OSCam << cardserver started, version 1.20-emu, build r9826 (mips-linux-uclibc-libusb)
2015/01/06 23:20:28 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12383
2015/01/06 23:20:28 0 s services reloaded: 0 services freed, 27 services loaded, rejected 0
2015/01/06 23:20:28 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2015/01/06 23:20:28 0 s signal handling initialized
2015/01/06 23:20:28 0 s 161 tier-id's loaded
2015/01/06 23:20:28 0 s cccam: initialized (fd=4, port=xxx)
2015/01/06 23:20:28 534E70 h webif: decompressed 153555 bytes back into 361128 bytes
2015/01/06 23:20:28 534E70 h HTTP Server running. ip=0.0.0.0 port=17010
2015/01/06 23:20:28 0 s i12 [mouse] creating thread for device /dev/ttyUSB0
2015/01/06 23:20:28 0 s v23 [mouse] creating thread for device /dev/ttyUSB1
2015/01/06 23:20:28 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/06 23:20:28 0 s waiting for local card init
2015/01/06 23:20:28 550C08 r i12 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2015/01/06 23:20:28 552A38 r v23 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=369, cardmhz=369)
2015/01/06 23:20:29 550C08 r i12 [mouse] card detected
2015/01/06 23:20:29 552A38 r v23 [mouse] card detected
2015/01/06 23:20:30 552A38 r v23 [mouse] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
2015/01/06 23:20:30 552A38 r v23 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2015/01/06 23:20:30 552A38 r v23 [mouse] Setting baudrate to 79354 bps
2015/01/06 23:20:30 552A38 r v23 [mouse] Calculated work ETU is 12.60 us reader mhz = 369
2015/01/06 23:20:30 552A38 r v23 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2015/01/06 23:20:30 550C08 r i12 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2015/01/06 23:20:30 550C08 r i12 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/01/06 23:20:30 550C08 r i12 [mouse] Calculated work ETU is 93.00 us reader mhz = 600
2015/01/06 23:20:30 550C08 r i12 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/01/06 23:20:31 550C08 r i12 [mouse] detect irdeto tunneled nagra card
2015/01/06 23:20:31 550C08 r i12 [mouse] no rsa key configured -> using irdeto mode
2015/01/06 23:20:31 550C08 r i12 [mouse] detect irdeto card
2015/01/06 23:20:32 550C08 r i12 [mouse] caid: 1722, acs: 3.84, country code: TEL
2015/01/06 23:20:32 550C08 r i12 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2015/01/06 23:20:33 552A38 r v23 [mouse] found card system emu
2015/01/06 23:20:33 552A38 r v23 [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/06 23:20:33 552A38 r v23 [emu] ready for requests
2015/01/06 23:20:35 550C08 r i12 [mouse] active providers: 2 (000000,000000)
2015/01/06 23:20:35 550C08 r i12 [mouse] found card system irdeto
2015/01/06 23:20:35 550C08 r i12 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/06 23:20:35 550C08 r i12 [irdeto] entitlements for provider: 2, id: 000000
2015/01/06 23:20:35 550C08 r i12 [irdeto] chid: 0099, date: 2011/07/30 - 2011/08/01
2015/01/06 23:20:35 550C08 r i12 [irdeto] chid: 0097, date: 2011/07/30 - 2011/08/01
2015/01/06 23:20:35 550C08 r i12 [irdeto] chid: 0096, date: 2011/07/30 - 2011/08/01

so ich hoffe alles richtig gemacht zu haben



prio ist in der Dream



hier auch nochmal die Readers vom oscam.server

Spoiler

[reader]
label = i12
description = i12-Unitymedia
protocol = mouse
device = /dev/ttyUSB0
caid = 1722,1835
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
[reader]
label = v23
description = v23-KabelBW
protocol = mouse
device = /dev/ttyUSB1
caid = 098E
boxid = 12345678
detect = cd
mhz = 369
cardmhz = 369
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 3
disablecrccws = 1

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

Hey...

hast Du auf der Fritz beim User (oscam.user) die caid und die group eingetragen,
wo der User drauf zugreifen darf?

Und auf dem Receiver beim User ebenfalls?

Das muss doch laufen...!

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

ja hab ich, bin ja auch am verzweifeln

Spoiler

[
account]
user = wohnzimmer
pwd = dreambox
uniq = 2
au = i12,v23
betatunnel = 1835.FFFF:1722
caid = 1722,1835,098E
group = 1,2
cccmaxhops = 2
cccreshare = 2

auf dem Receiver(dreambox) habe ich nur die C: Linie eingetragen
C: 000.000.000.000 xxxxx wohnzimmer dreambox

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

Spoiler

[ <-------------- ist das vom kopieren so??? Die Klammer muss vor das "A" [account]
account]
user = wohnzimmer
pwd = dreambox
uniq = 2
au = i12,v23
betatunnel = 1835.FFFF:1722
caid = 1722,1835,098E
group = 1,2
cccmaxhops = 2
cccreshare = 2

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

ja, leider:wacko1:

hier nochmal richtig

Spoiler

[account]
user = wohnzimmer
pwd = dreambox
uniq = 2
au = i12,v23
betatunnel = 1835.FFFF:1722
caid = 1722,1835,098E
group = 1,2
cccmaxhops = 2
cccreshare = 2

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

Und der Receiver im Wohnzimmer, zeig mal alle config´s...! Und die vom Server besser auch nochmal,
wie die AKTUELL sind...

Glaube es wäre schon längst gelaufen, wenn Du nicht immer was ändern würdest:wacko1:

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

gerne, bin ja für jede Hilfe dankbar


hier die Fritzbox
oscam.config

Spoiler

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 200
preferlocalcards = 1
[cache]
[cccam]
port = xxx
nodeid = 2C0D98DE10DD14D0
version = 2.3.0
reshare = 2
reshare_mode = 0
[webif]
httpport = xxx
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 15

oscam.user

Spoiler

[account]
user = wohnzimmer
pwd = dreambox
uniq = 2
au = i12,v23
betatunnel = 1835.FFFF:1722
caid = 1722,1835,098E
group = 1,2
cccmaxhops = 2
cccreshare = 2

oscam.Server

Spoiler

[reader]
label = i12
description = i12-Unitymedia
protocol = mouse
device = /dev/ttyUSB0
caid = 1722,1835
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
[reader]
label = v23
description = v23-KabelBW
protocol = mouse
device = /dev/ttyUSB1
caid = 098E
boxid = 12345678
detect = cd
mhz = 369
cardmhz = 369
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 3
disablecrccws = 1

und auf der Dream ist der cccam 2.3.0 am laufen über die C: Linie

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

Und im WebIf der Oscam unter USER, wie steht da der Receiver?

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

Ich kann leider kein Bild einfügen...
da steht User:wohnzimmer / Statusnline / Protocoll:cccam2.1.4-3194 (ups da sollte eigentlich 2.3.0 sein)/ Groups:1,2


komisch habe cccam 2.3.0 installiert, gerade eben nochmal. Aber im oscam Webif steht weiterhin 2.1.4-3191

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

Und unter Status? Da stehen die Reader I12 und v23.
Was steht ganz reechts bei Status?

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

i12 - CARDOK 14 entitlements
v23 - CARDOK no entitlements

AU ist bei beiden auf on

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

In der oscam.server vor description eine # setzen oscam neustarten.

Schalte mal den Receiver auf einen Kanal der V23 und stell das Log davon ein.

Edit: in der oscam.conf vor reshare_mode eine # setzen und alles natürlich speichern.

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

Bitte schön, aber ich sehe da keinen unterschied. habe vor beide description ein # davor gemacht

Spoiler

2015/01/07 00:33:17 0 s >> OSCam << cardserver started, version 1.20-emu, build r9826 (mips-linux-uclibc-libusb)
2015/01/07 00:33:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 24671
2015/01/07 00:33:17 0 s services reloaded: 0 services freed, 27 services loaded, rejected 0
2015/01/07 00:33:17 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2015/01/07 00:33:17 0 s signal handling initialized
2015/01/07 00:33:17 0 s 161 tier-id's loaded
2015/01/07 00:33:17 0 s cccam: initialized (fd=4, port=17000)
2015/01/07 00:33:17 534E70 h webif: decompressed 153555 bytes back into 361128 bytes
2015/01/07 00:33:17 534E70 h HTTP Server running. ip=0.0.0.0 port=17010
2015/01/07 00:33:17 0 s i12 [mouse] creating thread for device /dev/ttyUSB0
2015/01/07 00:33:17 0 s v23 [mouse] creating thread for device /dev/ttyUSB1
2015/01/07 00:33:17 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/07 00:33:17 0 s waiting for local card init
2015/01/07 00:33:17 550C08 r i12 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2015/01/07 00:33:17 552A38 r v23 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=369, cardmhz=369)
2015/01/07 00:33:18 550C08 r i12 [mouse] card detected
2015/01/07 00:33:18 552A38 r v23 [mouse] card detected
2015/01/07 00:33:19 552A38 r v23 [mouse] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
2015/01/07 00:33:19 552A38 r v23 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2015/01/07 00:33:19 552A38 r v23 [mouse] Setting baudrate to 79354 bps
2015/01/07 00:33:19 552A38 r v23 [mouse] Calculated work ETU is 12.60 us reader mhz = 369
2015/01/07 00:33:19 552A38 r v23 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2015/01/07 00:33:19 550C08 r i12 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2015/01/07 00:33:19 550C08 r i12 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/01/07 00:33:19 550C08 r i12 [mouse] Calculated work ETU is 93.00 us reader mhz = 600
2015/01/07 00:33:20 550C08 r i12 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/01/07 00:33:21 550C08 r i12 [mouse] detect irdeto tunneled nagra card
2015/01/07 00:33:21 550C08 r i12 [mouse] no rsa key configured -> using irdeto mode
2015/01/07 00:33:21 550C08 r i12 [mouse] detect irdeto card
2015/01/07 00:33:21 550C08 r i12 [mouse] caid: 1722, acs: 3.84, country code: TEL
2015/01/07 00:33:21 550C08 r i12 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2015/01/07 00:33:22 552A38 r v23 [mouse] found card system emu
2015/01/07 00:33:22 552A38 r v23 [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/07 00:33:22 552A38 r v23 [emu] ready for requests
2015/01/07 00:33:24 550C08 r i12 [mouse] active providers: 2 (000000,000000)
2015/01/07 00:33:24 550C08 r i12 [mouse] found card system irdeto
2015/01/07 00:33:24 550C08 r i12 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/07 00:33:24 550C08 r i12 [irdeto] entitlements for provider: 2, id: 000000
2015/01/07 00:33:24 550C08 r i12 [irdeto] chid: 0099, date: 2011/07/30 - 2011/08/01
2015/01/07 00:33:24 550C08 r i12 [irdeto] chid: 0097, date: 2011/07/30 - 2011/08/01
2015/01/07 00:33:24 550C08 r i12 [irdeto] chid: 0096, date: 2011/07/30 - 2011/08/01
2015/01/07 00:33:24 550C08 r i12 [irdeto] chid: 0095, date: 2011/07/30 - 2011/08/01
2015/01/07 00:33:24 550C08 r i12 [irdeto] chid: 03DE, date: 2011/07/30 - 2011/08/01
2015/01/07 00:33:24 550C08 r i12 [irdeto] chid: 7D2B, date: 2011/07/30 - 2011/08/01

PS ich find es Klasse das du dir die Zeit nimmst :emoticon-0148-yes:


jetzt steht bei AU i12 ACTIVE und bei der v23 ON

 

[commander1969]

AW: Kabel BW Karte im OSCam einpflegen

Also im log steht v23 emu...das ist mit sicherheit nicht richtig. Mach mal bitte den Emu Reader nicht aktiv.
Im WebIf auf Readers und dann auf das "Pausen-Symbol" und stell in der oscam.server die cardmhz und mhz
auf 357. Danach oscam nochmal restarten und log zeigen.

Und auf ein Programm von Unity stellen...wo die V23 abgefragt werden muss.

 

[el-hagge]

AW: Kabel BW Karte im OSCam einpflegen

eben geht es, die Karte ist in der Dream hell

Spoiler

2015/01/07 01:14:37 0 s >> OSCam << cardserver started, version 1.20-emu, build r9826 (mips-linux-uclibc-libusb)
2015/01/07 01:14:37 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 31549
2015/01/07 01:14:37 0 s services reloaded: 0 services freed, 27 services loaded, rejected 0
2015/01/07 01:14:37 0 s userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2015/01/07 01:14:37 0 s signal handling initialized
2015/01/07 01:14:37 0 s 161 tier-id's loaded
2015/01/07 01:14:37 0 s cccam: initialized (fd=4, port=17000)
2015/01/07 01:14:37 534E70 h webif: decompressed 153555 bytes back into 361128 bytes
2015/01/07 01:14:37 534E70 h HTTP Server running. ip=0.0.0.0 port=17010
2015/01/07 01:14:37 0 s v23 [mouse] creating thread for device /dev/ttyUSB1
2015/01/07 01:14:37 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/07 01:14:37 0 s waiting for local card init
2015/01/07 01:14:38 550C08 r v23 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2015/01/07 01:14:38 550C08 r v23 [mouse] card detected
2015/01/07 01:14:40 550C08 r v23 [mouse] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
2015/01/07 01:14:40 550C08 r v23 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
2015/01/07 01:14:40 550C08 r v23 [mouse] Setting baudrate to 76800 bps
2015/01/07 01:14:40 550C08 r v23 [mouse] Calculated work ETU is 13.03 us reader mhz = 357
2015/01/07 01:14:40 550C08 r v23 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/01/07 01:14:41 550C08 r v23 [mouse] Card type: KWTV
2015/01/07 01:14:41 550C08 r v23 [mouse] Rom version: 10T1
2015/01/07 01:14:41 550C08 r v23 [mouse] Credit available on card: 0 euro
2015/01/07 01:14:41 550C08 r v23 [mouse] FuseByte: 05
2015/01/07 01:14:41 550C08 r v23 [mouse] Region Code: DEU00001
2015/01/07 01:14:41 550C08 r v23 [mouse] Country Code: DEU
2015/01/07 01:14:41 550C08 r v23 [mouse] classD1 ins742A: failed
2015/01/07 01:14:41 550C08 r v23 [mouse] Pincode read: 6861
2015/01/07 01:14:41 550C08 r v23 [mouse] PCB settings: FF FF FF FF
2015/01/07 01:14:41 550C08 r v23 [mouse] type: VideoGuard Kabel BW (098E), caid: 098E
2015/01/07 01:14:41 550C08 r v23 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/01/07 01:14:41 550C08 r v23 [mouse] ready for requests
2015/01/07 01:14:41 550C08 r v23 [mouse] found card system videoguard2
2015/01/07 01:14:41 550C08 r v23 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/07 01:14:41 550C08 r v23 [videoguard2] card detected
2015/01/07 01:14:41 550C08 r v23 [videoguard2] type: VideoGuard Kabel BW (098E)
2015/01/07 01:14:41 550C08 r v23 [videoguard2] tier: 0029, expiry date: 2015/03/04-00:00:00
2015/01/07 01:14:41 550C08 r v23 [videoguard2] tier: 002c, expiry date: 2015/03/04-00:00:00
2015/01/07 01:14:41 550C08 r v23 [videoguard2] tier: 00f3, expiry date: 2015/03/04-00:00:00
2015/01/07 01:14:46 0 s init for all local cards done
2015/01/07 01:14:46 0 s anti cascading disabled
2015/01/07 01:14:46 55BA38 c anonymous disconnected from xxxxxx
2015/01/07 01:14:46 55F4E0 c anonymous disconnected from xxxxxx
2015/01/07 01:14:46 562E28 c anonymous disconnected from xxxxxx

Du bist mein Held, das war die verkehrte Frequenz.
Mit 357 geht es jetzt. Ich habe jetzt auch den anderen Reader aktiviert und es geht alles.
Allerdings habe ich jetzt anstatt 14 entitlements nur 9 auf der i12 und 3 auf der v23