Blitzer & POIs Igo Primo Doppelte Blitzeransage / Pois aufräumen

[Chrischi7979]

Moin Moin

Ich habe meine Sys vom Igo Primo inzwischen so umgeändert, das ich den Überblick verloren habe

bei mir werden manche Blitzer doppelt angesagt. erst der normale mit "achtung fester...." dann nochmal die originalansage....

den Originalen möchte ich gerne raus haben! was nmuss ich dazu in meiner Sys ändern? Danke der Ordnungshalber mal gespoilert:

Spoiler

[device]
type="Tristan Auron" ; Write Navi Type (Name)

[folders]
has_secondary_root=0

[interface]
show_exit=1
show_tmc_config=1
show_tmc_eventlist=1
show_programs=1
show_minimize=1
mapfontscale=120
laneinfo_signpost_enabled=1
show_statustext=1
shutdown_time=0
recalc_voice=0
start_navigation_time=2
max_flag_distance_3d=3000
extra_settings=1

[rawdisplay]
highres=0

[loading]
show_statustext=0
Loading_bmp=loading_1.bmp
progressbar_bmp=loading_progressbar.bmp
progressbar_end_bmp=loading_progressbar_end.bmp
progressbar_x=24
progressbar_y=425

[power]
powermgm_state=0

[other]
demo_enabled=0

[debug]
skip_eula=1
experimental_features=1
max_memory=30865984

[sound]
csv_voice_enabled=1
dev_channels=2
ding_muted=1
maneuver_chimes=0

[volume_channels]
volumefade=500

[poi]
use_poi_mapping=5
use_multi_poi_mapping=0

[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1

[route.histspeed]
enabled=1
show=1
use_timeslice=1

[route.histspeed.timeslice]
day=1
hour=8
minute=1

[timezone]
patch_dst=1
sync_time=1
use_auto=1
sync_os_timezone=0
reset_os_timezone=0

[timezones]
use_timezone_setting_fix=1
use_new_timezone_ini=1
timezone_key="Time Zones"

[map]
3d_scale_carmodel=1
3dcarsizemin=6000 ;(10000)
3dcarsizemax=18000 ;(28000)
3dcarsizemul=30000 ;(40000)
3d_max_tiltlevel=9000
3d_min_zoomlevel=20
poi_distant_distance=200
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0
poi_mapping=5
use_poi_mapping=5
max_poi_mapping=5
max_pois_on_horizont=5
show_pois=0
use_multi_poi_icon=0

[3d]
planned_route_contour_width=4
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0
fade_around_cursor=1
max_pois_on_horizont=5
max_poi_mapping=5
poi_mapping=5
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0

[gps]
source="nmea"
set_messages=0

[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0

[dynamiccompressor]
compressor=1
ratio=9
gain=9

[tmc]
port="COM,2"
baud=38400
source="gns"

[warning]
speedcam_warning=1
speedcam_enabled=1
is_spoken=1
warn_distances=130:500,120:400,100:400,80:300,70:300,60:250,50:200,30:150

[warning.driveralert.settings]
warn_cat0="0"
show_cat0="1"
warn_cat1="0"
show_cat1="1"
warn_cat2="0"
show_cat2="1"
warn_cat3="0"
show_cat3="1"
warn_cat4="0"
show_cat4="1"

[camera1]
maxdistance=500
minzoom2d=50
maxzoom2d=200
defaultzoom2d=300
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=45
defaultangle=80
angleoffset=65
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80



[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Fester Blitzer! Rase nicht!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Vorsicht! Mobiler Blitzer möglich!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Fester Blitzer! Langsam!!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Achtung Durchschnittsgeschwindigkeitskontrolle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Achtung Ampelblitzer! Nicht bei Rot überfahren!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:5]
activated_spoken_type=speech
activated_speech="Kategorie Fünf."
overspeed_spoken_type=1

[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Achtung Bahnübergang. Signalzeichen beachten!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Achtung Bus-Spur-überwachung."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Achtung Unfallschwerpunkt. Vorsicht!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Achtung Schule mit Kindern!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Achtung Orts-eingang. Fahre 50 Stunden Kilometer!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Achtung Ampelüberwachungs-kamera und Geschwindigkeitskontrolle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Achtung Mautstelle."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Achtung Krankenhaus."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Achtung Feuerwache."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Achtung Staugebührzone."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Achtung Bodenwelle. Fahre bitte sehr langsam!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:17]
activated_spoken_type=speech
activated_speech="Achtung Tunnel. Bitte Licht einschalten!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Achtung Höhenbegrenzung!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Achtung Breitenbegrenzung!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Achtung dreissiger Zone. Fahre sehr sehr langsam!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Achtung, mögliche Alkoholkontrolle!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:22]
activated_spoken_type=speech
activated_speech="Achtung Informationspunkt."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Achtung Interessanter Ort."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:24]
activated_spoken_type=speech
activated_speech="Achtung Grenzübergang."
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none

[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Achtung Gefahrenpunkt. Sei besonders aufmerksam!"
overspeed_spoken_type=1
approach_beep_sound=none
overspeed_sound=none


[camera11]
maxdistance=500
minzoom2d=50
maxzoom2d=300
defaultzoom2d=400
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=50
defaultangle=80
angleoffset=43
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80

[feature]
tunnel_guidance=0

[vr]
disabled=0

Des weiteren habe ich meine POI's nun 2-3 mal angezeigt, warum ist mir auch klar....
Inhalt des Ordners:
GELÖST:

Germany_NQ_2011.Q3_111104.poi
Germany_NQ_2012.Q1_120410.poi
Germany_NQ_Extended_2012.Q2_120726.poi
Germany_NQ_Truck_2012.Q1_120410.poi

Was kann oder sollte ich hiervon löschen? ich benötige die neuesten Pois als PKW-Fahrer und die am besten so umfangreich wie es geht.

kann ich nun so löschen das nur noch:
Germany_NQ_Extended_2012.Q2_120726.poi
Germany_NQ_2012.Q1_120410.poi
überbleibt? oder geht dann gar nichts mehr?

Inhalt der sd gesichert dann wie oben erwähnt dateien gelöscht.

Hab nun endlich uci und Bauhaus und Tankstellen und Blitzer werden nicht mehr doppelt angezeigt
Ich danke euch

 

[alfonso1]

AW: Igo Primo Doppelte Blitzeransage / Pois aufräumen

1.Kopiere Deine-DATA-auf den PC+eine als Sicherung
2.Öffne die DATA mit WinRar
3.öffne Ordner-project_config
4.In der-igo9ini-alle Blitzeransagen löschen u.abspeichern
5.Archiv erneuern u.mit-JA-bestätigen-fertig!
6.Die DATA-aus Dein PRIMO löschen u.die geänderte hineinkopieren,das wars.

alfonso1

 

[Chrischi7979]

AW: Igo Primo Doppelte Blitzeransage / Pois aufräumen

Ich danke dir