hohe ECM Zeiten / Oscam / S02

[auto1610]

Spoiler

013/08/28 07:45:51 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8835 (mipsel-unknown-linux-gnu-ssl)
2013/08/28 07:45:51 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1902
2013/08/28 07:45:51 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2013/08/28 07:45:51 0 s signal handling initialized
2013/08/28 07:45:51 0 s 258 service-id's loaded in 5ms
2013/08/28 07:45:51 0 s 12 provid's loaded
2013/08/28 07:45:51 0 s monitor: initialized (fd=6, port=988)
2013/08/28 07:45:51 0 s cccam: initialized (fd=7, port=xxxxx)
2013/08/28 07:45:51 0 s sky [internal] creating thread for device /dev/sci0
2013/08/28 07:45:51 0 s hdplus [internal] creating thread for device /dev/sci1
2013/08/28 07:45:51 558650 r sky [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2013/08/28 07:45:51 0 s loadbalancer: can't read from file /var/local/.oscam/stat
2013/08/28 07:45:51 0 s waiting for local card init
2013/08/28 07:45:51 561B18 r hdplus [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2013/08/28 07:45:51 55A218 h webif: decompressed 60643 bytes back into 173872 bytes
2013/08/28 07:45:51 55A218 h HTTP Server running. ip=0.0.0.0 port=8888
2013/08/28 07:45:52 558650 r sky [internal] card detected
2013/08/28 07:45:52 561B18 r hdplus [internal] card detected
2013/08/28 07:45:53 561B18 r hdplus [internal] ATR: xxxxxxxxxxxxxxxxxx
2013/08/28 07:45:53 561B18 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/08/28 07:45:53 561B18 r hdplus [internal] Calculated work ETU is 8.70 us
2013/08/28 07:45:53 561B18 r hdplus [internal] ATR Fsmax is: 5 MHz, clocking card to 3.68
2013/08/28 07:45:53 561B18 r hdplus [internal] Card responded ok for ifsd request of 160
2013/08/28 07:45:54 561B18 r hdplus [internal] detect native nagra card
2013/08/28 07:45:54 558650 r sky [internal] ATR: xxxxxxxxxxxxxxxxxxxxx
2013/08/28 07:45:54 558650 r sky [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/08/28 07:45:54 558650 r sky [internal] Calculated work ETU is 93.00 us
2013/08/28 07:45:54 558650 r sky [internal] ATR Fsmax is: 6 MHz, clocking card to 6.00

2013/08/28 07:46:51 2AF0B6F8 c schlafzimmer (1702&000000/0000/0082/93:xxxxxxxxxxxxxxxxxxxxxxxx): cache2 (606 ms) by sky - Discovery HD
2013/08/28 07:46:58 56E420 c dvbapi (1702&000000/0000/0082/93:xxxxxxxxxxxxxxxxxxxx): found (604 ms) by sky(btun 1833) - Discovery HD

oscam.conf

Spoiler

[global]
logfile = /var/log/OScam.log
disableuserfile = 0
cachedelay = 300
nice = -1
maxlogsize = 5000
waitforcards_extra_delay = 50
preferlocalcards = 1
usrfile = userlog
lb_mode = 0
lb_save = 100
lb_savepath = /var/local/.oscam/stat
failbancount = 25
fallbacktimeout = 2600


[cccam]
port = xxxx
version = 2.3.0
reshare = 1


[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox


[monitor]
port = 988
nocrypt = 192.168.xxx.0-192.168.255.255
aulow = 120
monlevel = 4
appendchaninfo = 1


[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httphelplang = de
httprefresh = 10
httphideidleclients = 1
httpallowed = 127.0.0.1,192.168.187.2-192.168.187.254
aulow = 120
appendchaninfo = 1

oscam.server

Spoiler

[reader]label = sky
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2




[reader]
label = hdplus
protocol = internal
device = /dev/sci1
rsakey = xxx
boxkey = xxx
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
ident = 1843:000000,003411

oscam.user

Spoiler

[account]user = dvbapi
au = sky,hdplus
betatunnel = 1833.FFFF:1702
group = 1,2


[account]
user = schlafzimmer
pwd = xxxxxxxxxxxxx
caid = 1702,1833,1843
betatunnel = 1833.FFFF:1702
group = 1,2

Du musst angemeldet sein, um Bilder zu sehen.

 

[mxer]

AW: hohe ECM Zeiten / Oscam / S02

Den EMMCache bei beiden auf 1,1,2.
Die Zeiten für HD+ und die S02 sind aber so normal.

 

[auto1610]

AW: hohe ECM Zeiten / Oscam / S02

hmmm...hab noch einen smargo rumliegen.
werde versuchen, hier mal die sky karte zum laufen zu bringen...gestern...2xfussball, 3xanderes sky...zeiten bis 4000ms.... :-(

 

[maxblank]

AW: hohe ECM Zeiten / Oscam / S02

Versuche mal noch Nice = -19 in der Oscam.conf. Restart nicht vergessen.

 

[auto1610]

AW: hohe ECM Zeiten / Oscam / S02

@maxblank

keine verbesserung

 

[laila-no1]

AW: hohe ECM Zeiten / Oscam / S02

hi,

erlaubst du deinen 5 Clienten Emms zu senden?
zeig mal die Oscam.user bitte.

 

[auto1610]

es sehen alle so aus:

[account]
user = xxxxxxxxxxxxxx
pwd = xxxxxxxxxxxxx
caid = 1702,1833,1843
betatunnel = 1833.FFFF:1702
group = 1,2

im WebInf steht auch bei allen OFF

grad bei der serverbox (mit karte) auf SKY ACTION HD --> 800ms

so, bin jetzt mit dem SMARGO im gange, nur bekomme ich auf der SERVERBOX kein bild:

oscam.server:

Spoiler

[reader]label = sky
protocol = mouse
device = /dev/ttyUSB0
enable = 1
caid = 1702,1833
boxid = 12345678
boxkey = 1122334455667788
detect = cd
ident = 1702:000000
group = 1
emmcache = 1,3,2






[reader]
label = hdplus
protocol = internal
device = /dev/sci1
rsakey = BFxxxDD5
boxkey = Axxxx
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
ident = 1843:000000,003411

wird die SKY KArte überhaupt "angenommen"? karte ist per HUB im oberen USB Anschluss (dreambox 800se)
log:

Spoiler

2013/08/31 02:08:05 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8835 (mipsel-unknown-linux-gnu-ssl)
2013/08/31 02:08:05 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12446
2013/08/31 02:08:05 0 s userdb reloaded: 32 accounts loaded, 0 expired, 0 disabled
2013/08/31 02:08:05 0 s signal handling initialized
2013/08/31 02:08:05 0 s 258 service-id's loaded in 6ms
2013/08/31 02:08:05 0 s 12 provid's loaded
2013/08/31 02:08:05 0 s monitor: initialized (fd=6, port=988)
2013/08/31 02:08:05 0 s cccam: initialized (fd=7, port=xxx)
2013/08/31 02:08:05 0 s sky [mouse] creating thread for device /dev/ttyUSB0
2013/08/31 02:08:05 0 s hdplus [internal] creating thread for device /dev/sci1
2013/08/31 02:08:05 0 s loadbalancer: can't read from file /var/local/.oscam/stat
2013/08/31 02:08:05 0 s waiting for local card init
2013/08/31 02:08:05 2B000468 r hdplus [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2013/08/31 02:08:05 55C2B0 h webif: decompressed 60643 bytes back into 173872 bytes
2013/08/31 02:08:05 55C2B0 h HTTP Server running. ip=0.0.0.0 port=8888
2013/08/31 02:08:05 55A6E8 r sky [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013/08/31 02:08:06 2B000468 r hdplus [internal] card detected
2013/08/31 02:08:08 2B000468 r hdplus [internal] ATR: xxx
2013/08/31 02:08:08 2B000468 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/08/31 02:08:08 2B000468 r hdplus [internal] Calculated work ETU is 8.70 us
2013/08/31 02:08:08 2B000468 r hdplus [internal] ATR Fsmax is: 5 MHz, clocking card to 3.68
2013/08/31 02:08:08 2B000468 r hdplus [internal] Card responded ok for ifsd request of 160

2013/08/31 02:08:15 2B0021F8 c [DVBAPI] Tuner sends PMT command 3 for channel 000D
2013/08/31 02:08:15 2B0021F8 c [ADD PID 0] CAID: 1702 ECM_PID: 1722 PROVID: 000000
2013/08/31 02:08:15 2B0021F8 c [ADD PID 1] CAID: 1833 ECM_PID: 1822 PROVID: 000000
2013/08/31 02:08:15 2B0021F8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B22 PROVID: 000000
2013/08/31 02:08:15 2B0021F8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F22 PROVID: 000000
2013/08/31 02:08:15 2B0021F8 c [ADD PID 4] CAID: 098C ECM_PID: 1A22 PROVID: 000000
2013/08/31 02:08:15 2B0021F8 c Found 5 ECMpids and 4 STREAMpids in PMT
2013/08/31 02:08:15 2B0021F8 c New program number: 000D (National Geographic) [pmt_list_management 3]
2013/08/31 02:08:15 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:15 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:16 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:16 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:16 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:16 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:17 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:17 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:17 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:18 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:18 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:18 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:19 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:19 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:19 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:19 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:20 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:20 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2013/08/31 02:08:20 2B0021F8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2013/08/31 02:08:21 2B0021F8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

danke...

 

[Brainbug01]

2013/08/31 02:08:08 2B000468 r hdplus [internal] Card responded ok for ifsd request of 160

Laut deinem Log ist da eine Fehlermeldung und dann schneidest du das Log ab. Was kommt danach...

 

[Bunny35]

AW: hohe ECM Zeiten / Oscam / S02

Hi und zwar habe ich ne frage seit 3 Tagen hab ich hohe ecm zeiten bei meinen beiden s02 und der HD02 die liegen so bei 2200 ms und 2500ms finde es bisschen sehr hoch..
Vielleicht könnt iht mir mal ein tipp geben???


oscam conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9915
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
emmlogdir = /var/log/
loghistorysize = 7096
logfile = /var/log/oscam.log
unlockparental = 1
nice = 0
maxlogsize = 5000
preferlocalcards = 2
block_same_ip = 0
block_same_name = 0
lb_mode = 1
lb_reopen_seconds = 800
lb_retrylimit = 700
lb_stat_cleanup = 720
lb_max_readers = 3
lb_auto_betatunnel = 0
lb_savepath = /usr/local/etc/stats

[cache]
delay = 3
max_time = 8
cwcycle_keeptime = 0
cwcycle_onbad = 0
cwcycle_dropold = 0
cwcycle_sensitive = 0

[cccam]
port = xxxxx
nodeid = 1717A531102E1376
version = 2.0.11
reshare_mode = 1

[webif]
httpport = xxxxx
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

oscam user

Spoiler

[account]
user = scebko
pwd = zuhause
uniq = 3
keepalive = 1
emmreassembly = 0
group = 1,2,3,4
cccreshare = 1
cccignorereshare = 0

oscam server

Spoiler

[reader]
label = hd_plus
description = hd_plus
protocol = mouse
device = /dev/ttyUSB4
lb_whitelist_services = hdplus_1843
cacheex_maxhop = 5
boxkey = A76xxxxxxxxxx
rsakey = BF358xxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
nagra_read = 1
cardmhz = 368
group = 3
emmcache = 1,3,2
lb_weight = 400
cccreshare = 5
audisabled = 1

[reader]
label = sky_beta1
protocol = mouse
device = /dev/ttyUSB1
lb_whitelist_services = sat-sky-komplett
caid = 1702
boxkey = 1122334455667788
ecmwhitelist = 1702:93
detect = cd
group = 1
emmcache = 1,3,2
lb_weight = 400
cccreshare = 5
audisabled = 1

[reader]
label = sky_beta2
protocol = mouse
device = /dev/ttyUSB2
lb_whitelist_services = sat-sky-komplett
caid = 1702
boxkey = 1122334455667788
ecmwhitelist = 1702:93
detect = cd
group = 1
emmcache = 1,3,2
lb_weight = 400
cccreshare = 5
audisabled = 1