Support Hilfe und Diskussion zu i-matik Themen

[tiggi2000]

Hatte ich schon versucht, kommt Fehler.

 

[SaMMyMaster]

Welche Ubuntu nutzt du

lsb_release -rs

 

[tiggi2000]

Habe 22.04 drauf.
Hat jetzt geklappt, habe es händisch installiert. Oscam ist da

 

[Barni74]

hello
image please
(freetz image)- 3490_07_31_all

danke...

 

[SaMMyMaster]

Linux nutzen ;-)

umask 0022
git clone https://github.com/MasterRoCcO/i-matik.git
cd i-matik
./i-matik 3490.11 -yo -nc -s -c

 

[Barni74]

Linux nutzen ;-)

 

[SaMMyMaster]

You always want so many different images. You should just learn how to use Linux a little. Until 2021, I was also a nOOp. Or I'm still a nOOp because I'm learning something new every day.

 

[prisrak]

@Barni74 The images should only be used for your own use.

 

[Barni74]

@SaMMyMaster
@prisrak


thank you greetings ..

 

[prisrak]

I'll also create a suitable video for building your image. Perhaps you can then create your images yourself.

Spoiler: Video

Du musst angemeldet sein, um Medien zu sehen.

auf_Wunsch

 

[Barni74]

hello
@prisrak

3490.zip

there is no oscam function in Freetz .

(no oscam function)

 

[prisrak]

It was constructed in this manner and, as a result, it should function.
./i-matik 3490.11 -yo -nc -s -c
Even the video that has already been presented to him can be regarded as evidenc

 

[lügnix]

@SaMMyMaster erstmal geiles Script hast du gebaut. Habe das letzte mal vor 7-8 Jahren ein Freetz Image gebaut. Und heute dein Script gefunden und konnte gleich lose legen damit leider habe ich ein Fehler erhalten bei gnutls-cli und komm nicht mehr weiter.
Kann mir da jemand helfen?
5590

Spoiler: Log

make  all-am
  CCLD     psktool
  CCLD     certtool
  CCLD     gnutls-serv
  CCLD     gnutls-cli-debug
  CCLD     srptool
  CCLD     ocsptool
  CCLD     danetool
  CCLD     systemkey
  CCLD     gnutls-cli
libtool: warning: library '/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/arm-linux-uclibcgnueabi/lib/libunbound.la' was moved.
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
collect2: error: ld returned 1 exit status
libtool: warning: library '/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/arm-linux-uclibcgnueabi/lib/libunbound.la' was moved.
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:2614: psktool] Error 1
make[5]: *** Waiting for unfinished jobs....
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
make[5]: *** [Makefile:2618: srptool] Error 1
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
collect2: error: ld returned 1 exit status
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:2598: gnutls-cli-debug] Error 1
make[5]: *** [Makefile:2602: gnutls-serv] Error 1
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:2582: certtool] Error 1
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
collect2: error: ld returned 1 exit status
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
make[5]: *** [Makefile:2622: systemkey] Error 1
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:2606: ocsptool] Error 1
libtool: warning: library '/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/arm-linux-uclibcgnueabi/lib/libunbound.la' was moved.
libtool: warning: library '/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/arm-linux-uclibcgnueabi/lib/libunbound.la' was moved.
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:2586: danetool] Error 1
/home/daniel/i-matik/freetz-ng/arm/toolchain/build/arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/arm-linux-uclibcgnueabi/lib/gcc/arm-linux-uclibcgnueabi/13.2.0/../../../../arm-linux-uclibcgnueabi/bin/ld: ../lib/.libs/libgnutls.so: undefined reference to `__dso_handle'
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile:2594: gnutls-cli] Error 1
make[4]: *** [Makefile:2441: all] Error 2
make[3]: *** [Makefile:2257: all-recursive] Error 1
make[2]: *** [Makefile:2182: all] Fehler 2
make[1]: *** [make/pkgs/gnutls/gnutls.mk:72: source/target-arm_gcc-13.2.0_uClibc-1.0.44-nptl_kernel-4.4/gnutls-3.7.8/src/.libs/certtool] Beendet
make: *** [Makefile:47: envira] Beendet
cp: -r wurde nicht angegeben, daher wird das Verzeichnis '/home/daniel/i-matik/freetz-ng/arm/images/' ausgelassen

Build time was 1 minutes and 37 seconds for 1 box(es). ->  1m 37s per box

        ___      __  __    _  _____ ___ _  __
       |_ _|    |  \/  |  / \|_   _|_ _| |/ /
        | |_____| |\/| | / _ \ | |  | || ' /
        | |_____| |  | |/ ___ \| |  | || . \
       |___|    |_|  |_/_/   \_\_| |___|_|\_\
            for freetz-ng and s3_releases
       https://github.com/MasterRoCcO/i-matik
      https://www.spendenseite.de/i-matik/-67603
            Version 0.82.2(f06.6)(i08.7)

 

[SaMMyMaster]

Danke erst mal!
Welche OS nutzt du denn bitte?
Ich habe ja selber auch eine 5590 und da lauft es durch

 

[lügnix]

Ubuntu 23.10. Habe noch mal alles neu eingerichtet komme aber nicht über diesen Punkt drüber

siehe Post #220