HILFE 09CD in Smargo auf Debian Server

[marinu]

Hallo zusammen

habe leider im ital. Forum bis jetzt keine erfolgreiche Hilfe erhalten....

Habe einen neuen Server mit Debian 7.5 mit cccam inst. läuft!

Dann nach Anleitung Oscam kompiliert

oscam.conf

Spoiler

[global]nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = xxxxx
port = xxxx@09CD:000000
logfile = /var/log/oscam.log
disablelog = 0

oscam.server

Spoiler

[reader]Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB1
EMMCache = 1,3,2
#EMMCache = 1,1,2 setting originale
Group = 1
CAID = 09CD
BoxID = xxxxxxxx

oscam.user

Spoiler

[account]user = xxxx
pwd = xxxx
group = 1
uniq = 1
caid = 09CD
ident = 09CD:000000
AU = SkyItalia
monlevel = 0

bekam am Anfang diesen fehler...

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jun 14 15:46:11 2014
-------------------------------------------------------------------------------
2014/06/14 15:46:11 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9763 (i486-linux-gnu-libusb)
2014/06/14 15:46:11 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2624
2014/06/14 15:46:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/14 15:46:11 0 s signal handling initialized
2014/06/14 15:46:11 0 s monitor: initialized (fd=5, port=988)
2014/06/14 15:46:11 0 s newcamd: initialized (fd=6, port=34000)
2014/06/14 15:46:11 0 s -> CAID: 09CD PROVID: 000000
2014/06/14 15:46:11 0 s http disabled
2014/06/14 15:46:11 0 s SkyItalia [mouse] creating thread for device /dev/ttyUSB1
2014/06/14 15:46:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/14 15:46:11 0 s waiting for local card init
2014/06/14 15:46:11 B74006A8 r SkyItalia [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=500, cardmhz=500)
2014/06/14 15:46:12 B74006A8 r SkyItalia [mouse] card detected
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] Setting baudrate to 53763 bps
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] Calculated work ETU is 18.60 us reader mhz = 500
2014/06/14 15:46:15 B74006A8 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
2014/06/14 15:46:18 B74006A8 r SkyItalia [mouse] card system not supported
2014/06/14 15:46:18 B74006A8 r SkyItalia [mouse] Normal mode failed, reverting to Deprecated Mode
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] Calculated work ETU is 74.40 us reader mhz = 500
2014/06/14 15:46:22 B74006A8 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.00 MHz (specified in reader->mhz)
2014/06/14 15:46:25 B74006A8 r SkyItalia [mouse] card system not supported
2014/06/14 15:46:25 B74006A8 r SkyItalia [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/14 15:46:25 B74006A8 r SkyItalia [mouse] card initializing error
2014/06/14 15:46:26 0 s init for all local cards done
2014/06/14 15:46:26 0 s anti cascading disabled
2014/06/14 15:46:26 B7402F80 c client connected to 34000 port
2014/06/14 15:46:26 B7402F80 c encrypted newcamd:34000-client 127.0.0.1 granted (user1, au=on (1 reader))
2014/06/14 15:46:26 B7402F80 c user user1 authenticated successfully (CCcam)
2014/06/14 15:46:26 B7402F80 c AU disabled for user user1
2014/06/14 15:47:30 0 s killing client user1
2014/06/14 15:47:30 0 s SkyItalia [mouse] Killing reader
2014/06/14 15:47:30 0 s userdb 1 accounts freed
2014/06/14 15:47:30 0 s readerdb 1 readers freed
2014/06/14 15:47:30 0 s cardserver down


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jun 14 16:03:30 2014
-------------------------------------------------------------------------------
2014/06/14 16:03:30 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9763 (i486-linux-gnu-libusb)
2014/06/14 16:03:30 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2567
2014/06/14 16:03:30 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/14 16:03:30 0 s signal handling initialized
2014/06/14 16:03:30 0 s monitor: initialized (fd=5, port=988)
2014/06/14 16:03:30 0 s newcamd: initialized (fd=6, port=34000)
2014/06/14 16:03:30 0 s -> CAID: 09CD PROVID: 000000
2014/06/14 16:03:30 0 s http disabled
2014/06/14 16:03:30 0 s SkyItalia [mouse] creating thread for device /dev/ttyUSB1
2014/06/14 16:03:30 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/14 16:03:30 0 s waiting for local card init
2014/06/14 16:03:31 93DCDA0 r SkyItalia [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=368)
2014/06/14 16:03:31 93DCDA0 r SkyItalia [mouse] card detected
2014/06/14 16:03:35 93DCDA0 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 16:03:35 93DCDA0 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 16:03:35 93DCDA0 r SkyItalia [mouse] Setting baudrate to 39638 bps
2014/06/14 16:03:35 93DCDA0 r SkyItalia [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/06/14 16:03:35 93DCDA0 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/06/14 16:03:39 93DCDA0 r SkyItalia [mouse] card system not supported
2014/06/14 16:03:39 93DCDA0 r SkyItalia [mouse] Normal mode failed, reverting to Deprecated Mode
2014/06/14 16:03:43 93DCDA0 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 16:03:43 93DCDA0 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 16:03:43 93DCDA0 r SkyItalia [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/06/14 16:03:43 93DCDA0 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/06/14 16:03:45 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/14 16:03:45 0 s userdb 1 accounts freed
flush and re-open log file


-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Jun 14 16:03:48 2014
-------------------------------------------------------------------------------


-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Jun 14 16:03:48 2014
-------------------------------------------------------------------------------


-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Jun 14 16:03:48 2014
-------------------------------------------------------------------------------
2014/06/14 16:03:45 0 userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/14 16:03:45 0 userdb 1 accounts freed
2014/06/14 16:03:45 0 userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jun 14 16:42:45 2014
-------------------------------------------------------------------------------
2014/06/14 16:42:45 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9763 (i486-linux-gnu-libusb)
2014/06/14 16:42:45 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2568
2014/06/14 16:42:45 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/14 16:42:45 0 s signal handling initialized
2014/06/14 16:42:45 0 s monitor: initialized (fd=5, port=988)
2014/06/14 16:42:45 0 s newcamd: initialized (fd=6, port=34000)
2014/06/14 16:42:45 0 s -> CAID: 09CD PROVID: 000000
2014/06/14 16:42:45 0 s http disabled
2014/06/14 16:42:45 0 s SkyItalia [mouse] creating thread for device /dev/ttyUSB1
2014/06/14 16:42:45 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/14 16:42:45 0 s waiting for local card init
2014/06/14 16:42:45 9523DA0 r SkyItalia [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=1000, cardmhz=357)
2014/06/14 16:42:46 9523DA0 r SkyItalia [mouse] card detected
2014/06/14 16:42:50 9523DA0 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 16:42:50 9523DA0 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 16:42:50 9523DA0 r SkyItalia [mouse] Setting baudrate to 38400 bps
2014/06/14 16:42:50 9523DA0 r SkyItalia [mouse] Calculated work ETU is 9.30 us reader mhz = 1000
2014/06/14 16:42:50 9523DA0 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 10.00 MHz (specified in reader->mhz)
2014/06/14 16:42:52 9523DA0 r SkyItalia [mouse] card system not supported
2014/06/14 16:42:52 9523DA0 r SkyItalia [mouse] Normal mode failed, reverting to Deprecated Mode
2014/06/14 16:42:55 9523DA0 r SkyItalia [mouse] ATR: 3F FD 13 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2014/06/14 16:42:55 9523DA0 r SkyItalia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/14 16:42:55 9523DA0 r SkyItalia [mouse] Calculated work ETU is 37.20 us reader mhz = 1000
2014/06/14 16:42:55 9523DA0 r SkyItalia [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 10.00 MHz (specified in reader->mhz)
2014/06/14 16:42:57 9523DA0 r SkyItalia [mouse] card system not supported
2014/06/14 16:42:57 9523DA0 r SkyItalia [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/14 16:42:57 9523DA0 r SkyItalia [mouse] card initializing error
2014/06/14 16:42:58 0 s init for all local cards done
2014/06/14 16:42:58 0 s anti cascading disabled
2014/06/14 16:42:58 9529590 c client connected to 34000 port
2014/06/14 16:42:58 9529590 c anonymous disconnected from 127.0.0.1
2014/06/14 16:43:00 952B3B8 c client connected to 34000 port
2014/06/14 16:43:00 952B3B8 c encrypted newcamd:34000-client 127.0.0.1 granted (user1, au=on (1 reader))
2014/06/14 16:43:00 952B3B8 c user user1 authenticated successfully (CCcam)
2014/06/14 16:43:00 952B3B8 c AU disabled for user user1
2014/06/14 16:43:16 0 s killing client user1
2014/06/14 16:43:16 0 s SkyItalia [mouse] Killing reader
2014/06/14 16:43:16 0 s userdb 1 accounts freed
switch log file

jetzt bekomme ich nicht einmal ein oscam.log...

HILFE, BITTE!!!

 

[mxer]

AW: HILFE 09CD in Smargo auf Debian Server

Läuft oscam denn überhaupt noch?
Es gibt nämlich kein Webif/ Log, wenn oscam aus ist.

Die Zeile war Blödsinn.

 

[marinu]

AW: HILFE 09CD in Smargo auf Debian Server

Hallo mxer

Nein, im Moment bekomme kein oscam.log mehr... an was könnte das liegen?

Für Webif werde ich mich noch schlau machen, hatte es bis jetzt nicht gebraucht.

 

[dodo83]

AW: HILFE 09CD in Smargo auf Debian Server

hi,
welchen reader nutzt du für die karte und wie ist dieser eingestellt?
im letztem log

2014/06/14 16:42:45 9523DA0 r SkyItalia [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=1000, cardmhz=357)

steht was von 10MHZ, das wird zu viel sein für die NDS Karte

 

[marinu]

AW: HILFE 09CD in Smargo auf Debian Server

hi, ist eine smargo habe schon diverse mhz und cardmhz probiert... und vorher mit der 0919 bestens funktioniert

momentan beide auf 357mhz eingestellt und autospeed = 1

 

[dodo83]

AW: HILFE 09CD in Smargo auf Debian Server

wenn du die MHZ selber setzt dann mach mal autospeed aus

 

[marinu]

AW: HILFE 09CD in Smargo auf Debian Server

Habe jetzt die oscam frisch compiliert und in der oscam.conf 2 zeilen verschoben, jetzt funktionierts wieder... Danke an alle für die Hilfe.

Gruss, marinu