HD02 Fragen

[Dr. Hannibal]

Hallo, da ja nun, wie bei so vielen anderen, die v14 in oscam dunkel ist, wollte ich meine HD02 zum leben erwecken.
Doch irgendwie habe ich den anschein das was nicht passt. Wenn ich bei readers auf info gehe wird mir keinerlei infos zur karte angezeigt. beim neustart von oscam kommt die meldung

Spoiler: log

• 2017/08/07 12:57:42 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 12:57:43 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75217
• 2017/08/07 12:57:44 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75175
• 2017/08/07 12:57:45 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75253
• 2017/08/07 12:57:46 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 12:57:47 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75199
• 2017/08/07 12:57:48 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75198
• 2017/08/07 12:57:49 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75219
• 2017/08/07 12:57:50 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 12:57:51 r (reader) HD02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/08/07 12:57:51 r (reader) HD02 [mouse] card initializing error

hier mal die configs

Spoiler: server

[reader]
label = HD02
protocol = mouse
device = /dev/ttyUSB1
detect = CD
mhz = 368
cardmhz = 500
caid = 1843
rsakey = B....5
boxkey = A....C
group = 1
emmcache = 1,1,2

hab noch eine orfice karte mit am raspi, die läuft aber wie gehabt bestens...

vielleicht kann ja mal jmd einen blick drauf werfen...

Danke im voraus

Dr. Hannibal

 

[waves]

Würde tippen Easymouse falsch eingestellt.

Außerdem

cardmhz = 368

 

[Dr. Hannibal]

easymouse alle schalter unten auf 3,6... sollte bei info irgendwas angezeigt werden? auch wenn die karte 2 jahre im schrank lag?

 

[joopastron]

Stell mal die Easymouse auf 6 MHz. In oscam ebenfalls abändern.

 

[waves]

also

mhz = 600

und nicht

cardmhz = 600

cardmhz ist das, was die Karte eigentlich von Haus aus machen soll, mhz ist das, was wir erreichen wollen.

Error activating card

Wenn das im log kommt, wird Dir unter Info auch nix angezeigt.
Im WebIf steht dann cardnotOK oder so ähnlich.

 

[FoooLs]

Im WebInf steht dann Error

 

[waves]

das meine ich, dann kommt natürlich unter Info auch nix.

 

[Dr. Hannibal]

mhhh... leider immer noch error im status...

 

[waves]

schöne Info
Wenn Du jetzt noch sagst, was Du jetzt angepasst hast?
Also den aktuellen Reader posten, sowie die Einstellung der Easymouse, und nen Log vom Oscam Start, wäre das perfekt.

 

[Dr. Hannibal]

habe die mhz im oscam sowie die easymouse auf 6.00 geändert

Spoiler: server

[reader]
label = HD02
protocol = mouse
device = /dev/ttyUSB1
detect = CD
mhz = 600
cardmhz = 368
caid = 1843
rsakey = B...5
boxkey = A...C
group = 1
emmcache = 1,1,2

Spoiler: log

• 2017/08/07 13:29:09 00000000 s (main) System name = Linux
• 2017/08/07 13:29:09 00000000 s (main) Host name = raspberrypi
• 2017/08/07 13:29:09 00000000 s (main) Release = 3.10.24+
• 2017/08/07 13:29:09 00000000 s (main) Version = #614 PREEMPT Thu Dec 19 20:38:42 GMT 2013
• 2017/08/07 13:29:09 00000000 s (main) Machine = armv6l
• 2017/08/07 13:29:09 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3140
• 2017/08/07 13:29:09 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2017/08/07 13:29:09 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
• 2017/08/07 13:29:09 00000000 s (main) signal handling initialized
• 2017/08/07 13:29:09 00000000 s (config) 216 service-id's loaded in 4 ms
• 2017/08/07 13:29:09 00000000 s (config) 54 tier-id's loaded
• 2017/08/07 13:29:09 00000000 s (net) cs378x: initialized (fd=5, port=9200)
• 2017/08/07 13:29:09 00000000 s (net) cccam: initialized (fd=6, port=9100)
• 2017/08/07 13:29:09 00000000 s (reader) HD02 [mouse] creating thread for device /dev/ttyUSB1
• 2017/08/07 13:29:09 00000000 s (reader) orfice [mouse] creating thread for device /dev/ttyUSB0
• 2017/08/07 13:29:09 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/08/07 13:29:09 00000000 s (main) waiting for local card init
• 2017/08/07 13:29:09 6A102097 h (webif) webif: decompressed 182761 bytes back into 433032 bytes
• 2017/08/07 13:29:09 6A102097 h (webif) HTTP Server running. ip=0.0.0.0 port=1002
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75377
• 2017/08/07 13:29:09 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75630
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 1 value 3b time_us 3001
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 2 value 78 time_us 786
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 3 value 12 time_us 818
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 4 value 00 time_us 813
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 5 value 00 time_us 90
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 6 value 54 time_us 640
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 7 value c4 time_us 787
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 8 value 03 time_us 804
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 9 value 00 time_us 65
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 10 value 8f time_us 631
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 11 value f1 time_us 823
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 12 value 90 time_us 808
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Flush readed byte Nr 13 value 00 time_us 76
• 2017/08/07 13:29:09 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75214
• 2017/08/07 13:29:09 51F3B195 r (reader) HD02 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=368)
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Buffers readed 13 bytes total time_us 88223
• 2017/08/07 13:29:09 38688316 r (reader) orfice [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2017/08/07 13:29:10 38688316 r (reader) orfice [mouse] card detected
• 2017/08/07 13:29:10 51F3B195 r (reader) HD02 [mouse] card detected
• 2017/08/07 13:29:10 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75219
• 2017/08/07 13:29:10 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75218
• 2017/08/07 13:29:11 38688316 r (reader) orfice [mouse] ATR:
• 2017/08/07 13:29:12 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75264
• 2017/08/07 13:29:12 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75580
• 2017/08/07 13:29:12 38688316 r (reader) orfice [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
• 2017/08/07 13:29:12 38688316 r (reader) orfice [mouse] Setting baudrate to 19200 bps
• 2017/08/07 13:29:12 38688316 r (reader) orfice [mouse] Calculated work ETU is 31.00 us reader mhz = 600
• 2017/08/07 13:29:12 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75198
• 2017/08/07 13:29:12 38688316 r (reader) orfice [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] Hist. Bytes: TÄ
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] detect irdeto card
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] caid: 0648, acs: 0.05, country code: AUT
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
• 2017/08/07 13:29:13 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75247
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] active providers: 4 (f33aff,002500,002600,002700)
• 2017/08/07 13:29:13 38688316 r (reader) orfice [mouse] found card system irdeto
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] entitlements for provider: 1, id: F33AFF
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 000D, date: 2015/02/13 - 2015/03/15
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 0001, date: 2017/08/07 - 2018/04/14
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 7FF7, date: 2017/08/07 - 2017/08/17
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 0002, date: 2017/08/07 - 2018/04/14
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: FFE0, date: 2017/07/19 - 2018/03/26
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 7FFB, date: 2017/07/23 - 2017/08/22
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] entitlements for provider: 2, id: 002500
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 001D, date: 2015/02/13 - 2015/05/16
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] entitlements for provider: 4, id: 002700
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] chid: 0031, date: 2015/02/13 - 2015/05/16
• 2017/08/07 13:29:13 38688316 r (reader) orfice [irdeto] ready for requests
• 2017/08/07 13:29:14 51F3B195 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 13:29:14 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75216
• 2017/08/07 13:29:16 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75179
• 2017/08/07 13:29:17 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75238
• 2017/08/07 13:29:18 51F3B195 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 13:29:18 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75201
• 2017/08/07 13:29:20 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75184
• 2017/08/07 13:29:21 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75203
• 2017/08/07 13:29:22 51F3B195 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 13:29:22 51F3B195 r (reader) HD02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/08/07 13:29:22 51F3B195 r (reader) HD02 [mouse] card initializing error
• 2017/08/07 13:29:23 00000000 s (main) init for all local cards done
• 2017/08/07 13:29:23 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
• 2017/08/07 13:29:23 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2017/08/07 13:29:23 00000000 s (anticasc) anti cascading disabled

 

[waves]

Die ersten 3 Regler auf unten stellen, also 5V, Phoenix, 3,57mHz, egal

cardmhz = 3,68

und dann bitte nen Log vom Start

Ach....und mal schauen, nicht das Du ne Leerstelle beim RSA oder Boxkey drinne hast....wäre nicht das erste mal.

 

[Dr. Hannibal]

das mit der leerstelle hab ich schon gecheckt hatte da noch was in errinerung...

Spoiler: log

• 2017/08/07 13:36:05 00000000 s (main) System name = Linux
• 2017/08/07 13:36:05 00000000 s (main) Host name = raspberrypi
• 2017/08/07 13:36:05 00000000 s (main) Release = 3.10.24+
• 2017/08/07 13:36:05 00000000 s (main) Version = #614 PREEMPT Thu Dec 19 20:38:42 GMT 2013
• 2017/08/07 13:36:05 00000000 s (main) Machine = armv6l
• 2017/08/07 13:36:05 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4833
• 2017/08/07 13:36:05 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
• 2017/08/07 13:36:05 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
• 2017/08/07 13:36:05 00000000 s (main) signal handling initialized
• 2017/08/07 13:36:05 00000000 s (config) 216 service-id's loaded in 3 ms
• 2017/08/07 13:36:05 00000000 s (config) 54 tier-id's loaded
• 2017/08/07 13:36:05 00000000 s (net) cs378x: initialized (fd=5, port=9200)
• 2017/08/07 13:36:05 00000000 s (net) cccam: initialized (fd=6, port=9100)
• 2017/08/07 13:36:05 00000000 s (reader) HD02 [mouse] creating thread for device /dev/ttyUSB1
• 2017/08/07 13:36:05 00000000 s (reader) orfice [mouse] creating thread for device /dev/ttyUSB0
• 2017/08/07 13:36:05 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/08/07 13:36:05 00000000 s (main) waiting for local card init
• 2017/08/07 13:36:05 6A102097 h (webif) webif: decompressed 182761 bytes back into 433032 bytes
• 2017/08/07 13:36:05 6A102097 h (webif) HTTP Server running. ip=0.0.0.0 port=1002
• 2017/08/07 13:36:05 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75262
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75554
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 1 value 3b time_us 2895
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 2 value 78 time_us 1668
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 3 value 12 time_us 109
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 4 value 00 time_us 57
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 5 value 00 time_us 1367
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 6 value 54 time_us 107
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 7 value c4 time_us 103
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 8 value 03 time_us 1291
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 9 value 00 time_us 91
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 10 value 8f time_us 1421
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 11 value f1 time_us 114
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 12 value 90 time_us 98
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Flush readed byte Nr 13 value 00 time_us 360
• 2017/08/07 13:36:05 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75198
• 2017/08/07 13:36:05 51F3B195 r (reader) HD02 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=368)
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Buffers readed 13 bytes total time_us 88642
• 2017/08/07 13:36:05 38688316 r (reader) orfice [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2017/08/07 13:36:06 38688316 r (reader) orfice [mouse] card detected
• 2017/08/07 13:36:06 51F3B195 r (reader) HD02 [mouse] card detected
• 2017/08/07 13:36:06 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75208
• 2017/08/07 13:36:06 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75253
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] ATR:
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75181
• 2017/08/07 13:36:07 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75310
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] Setting baudrate to 19200 bps
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] Calculated work ETU is 31.00 us reader mhz = 600
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] Buffers readed 0 bytes total time_us 75186
• 2017/08/07 13:36:07 38688316 r (reader) orfice [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] Hist. Bytes: TÄ
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] detect irdeto card
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] caid: 0648, acs: 0.05, country code: AUT
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
• 2017/08/07 13:36:08 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75248
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] active providers: 4 (f33aff,002500,002600,002700)
• 2017/08/07 13:36:08 38688316 r (reader) orfice [mouse] found card system irdeto
• 2017/08/07 13:36:08 38688316 r (reader) orfice [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/08/07 13:36:08 38688316 r (reader) orfice [irdeto] entitlements for provider: 1, id: F33AFF
• 2017/08/07 13:36:08 38688316 r (reader) orfice [irdeto] chid: 000D, date: 2015/02/13 - 2015/03/15
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: 0001, date: 2017/08/07 - 2018/04/14
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: 7FF7, date: 2017/08/07 - 2017/08/17
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: 0002, date: 2017/08/07 - 2018/04/14
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: FFE0, date: 2017/07/19 - 2018/03/26
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: 7FFB, date: 2017/07/23 - 2017/08/22
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] entitlements for provider: 2, id: 002500
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: 001D, date: 2015/02/13 - 2015/05/16
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] entitlements for provider: 4, id: 002700
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] chid: 0031, date: 2015/02/13 - 2015/05/16
• 2017/08/07 13:36:09 38688316 r (reader) orfice [irdeto] ready for requests
• 2017/08/07 13:36:09 51F3B195 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 13:36:10 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75217
• 2017/08/07 13:36:11 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75187
• 2017/08/07 13:36:12 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75235
• 2017/08/07 13:36:13 51F3B195 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 13:36:14 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75203
• 2017/08/07 13:36:15 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75213
• 2017/08/07 13:36:16 51F3B195 r (reader) HD02 [mouse] Buffers readed 0 bytes total time_us 75203
• 2017/08/07 13:36:17 51F3B195 r (reader) HD02 [mouse] Error activating card.
• 2017/08/07 13:36:18 51F3B195 r (reader) HD02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/08/07 13:36:18 51F3B195 r (reader) HD02 [mouse] card initializing error
• 2017/08/07 13:36:18 00000000 s (main) init for all local cards done
• 2017/08/07 13:36:18 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2017/08/07 13:36:18 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms

 

[joopastron]

Teste bitte mal Nur mit dem Reader wo die HD+ Karte drin steckt. MHz und Easymouse wieder auf 6 MHz abändern.

 

[waves]

detect=cd, mhz=600, cardmhz=368

was hab ich gepostet?
wie war die Easymouse dazu eingestellt?

 

[Smiley007]

Möglicherweise ein Zuweisungsfehler mit den USB Ports.

Wurde der Server mal komplett neu gestartet und nicht nur die Oscam?

Am Besten direkt eine UDEV Zuordnung einrichten.