Quantcast
Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

HD01 will einfach nicht laufen

martins

Newbie
Registriert
3. Dezember 2010
Beiträge
22
Reaktionspunkte
1
Punkte
3
Hallo
habe ne sky v14 die super läuft nun wollte ich mit ner hd karte diese entlasten. leider läuft die karte nicht an der smartmouse leuchten beide leds. hier mal log und configs. karte ist aktiviert und läuft in nen reciever ohne probleme. hoffe mir kann wer helfen


log
2014/07/06 20:09:47 14472C8 r hdplus [mouse] card detected
2014/07/06 20:09:48 14472C8 r hdplus [mouse] ATR: xxxxxxxxxxxxxxxxx
2014/07/06 20:09:48 14472C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/07/06 20:09:48 14472C8 r hdplus [mouse] Setting baudrate to 111600 bps
2014/07/06 20:09:48 14472C8 r hdplus [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2014/07/06 20:09:49 14472C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2014/07/06 20:09:49 14472C8 r hdplus [mouse] Card responded ok for ifsd request of 28
2014/07/06 20:09:49 14899F0 c admin2 (098C&000000/0644/EF15/98:EBC5B9E2A6BCF4C541AEBD0F3712B3F4): found (78 ms) by v14 - RTL2 HD
2014/07/06 20:09:49 1486158 c admin (098C&000000/0642/EF11/98:E00FF9A7A521A7185FD32FAA7568A390): found (79 ms) by v14 - VOX HD
2014/07/06 20:09:50 14472C8 r hdplus [mouse] detect native nagra card




oscam cofig
[global]
disablelog = 0
loghistorysize = 4096
serverip = xxxxxxxxx
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 0
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0


[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0




[newcamd]
port = port@098C:000000;port@1830:000000,003411,000080
key = 0102030405060708091011121314
keepalive = 1


[cccam]
port = xxxxxxxx
serverip = 0.0.0.0
nodeid = EFB6547C10CB1584
version = 2.3.0
reshare = 10
reshare_mode = 0
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000


[webif]
httpport = xxxxx
serverip = xxxxxx
httpuser = xxxxxx
httppwd = xxxxxx
httpcss =
httpjscript =
httpscript =
httptpl =
httphelplang = de
httpcert =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 0
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 15
httposcamlabel = OSCam
http_status_log = 1




oscam server
[reader]label = v14
description =
enable = 1
protocol = mouse
device = /dev/Sky
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services = sky,sky-hd,sky-ppv,sky-hdplus,sky-3d
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 098C
atr =
boxid = 12345678
boxkey =
rsakey =
ins7e =
ins7e11 = 15
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist = 098C:52,64,6A,9C,A1,91,96,98
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident = 098C:000000
chid =
class =
aeskeys =
group = 1
emmcache = 1,1,3
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid = 00098C
ndsversion = 2
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0


[reader]
label = hdplus
description =
enable = 1
protocol = mouse
device = /dev/HD+
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services = hdplus
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 1
autospeed = 0
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 1830
atr =
boxid =
boxkey = Axxxxxxxxxxxxxxx7C
rsakey = Bxxxxxxxxxxxxxxx5
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0

use_ssl = 0


 
AW: HD01 will einfach nicht laufen

Erkennt oscam die Karte im webif überhaupt? Soll hd+ nur über die weiße Karte laufen?
 
AW: HD01 will einfach nicht laufen

Hi

Als erstes würde ich deiner V14 verbieten HD + Anfragen zu beantworten, will damit sagen Pass deine Services an und nehme das aus deinen V14 Reader Sky-HD+ dann sollten die Anfragen zur HD + Karte gehen. und noch was anderes httpsavefullcfg = 0 dann oscam dann neu starten dann ist alles übersichtlicher.

Gruß Ralf

Dann zeige uns mal ein Log mit dem wir was anfangen können
 
Zuletzt bearbeitet:
AW: HD01 will einfach nicht laufen

Hi,

dann läuft sie nicht und kann nicht antworten. Mach mal cardmhz = 368

Grüße
Bombadil
 
AW: HD01 will einfach nicht laufen

bringt leider nichts

neuer log
2014/07/06 20:53:19 21FE4F0 c admin2 (098C&000000/0644/EF15/98:CFEF0AF54A1D055DDE69272B160B3E97): found (78 ms) by v14 - RTL2 HD
2014/07/06 20:53:19 2205078 c admin (098C&000000/0642/EF11/98:4A85DB2F42943375771A1080E7A0D05B): found (110 ms) by v14 - VOX HD
2014/07/06 20:53:22 21E9C28 c franzr (098C&000000/012E/000B/98:8D24147DF69E66058A15F60D6F51B4AE): found (79 ms) by v14 - Sky Cinema +1
2014/07/06 20:53:28 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
2014/07/06 20:53:29 21122C8 r hdplus [mouse] detect native nagra card
2014/07/06 20:53:29 21FE4F0 c admin2 (098C&000000/0644/EF15/98:D0E0157AC5981F69E505E65AA5BE618F): found (79 ms) by v14 - RTL2 HD
2014/07/06 20:53:29 21E9C28 c franzr (098C&000000/012E/000B/98:3BB4047AD69C0548E204A1AD0CCF09C3): found (80 ms) by v14 - Sky Cinema +1
2014/07/06 20:53:29 2205078 c admin (098C&000000/0642/EF11/98:931BC512C2BF52615D3A679837897746): found (96 ms) by v14 - VOX HD
2014/07/06 20:53:36 21E9C28 c franzr (098C&000000/012E/000B/98:9E6F081D59E505C2B0BFBC7AAE618E60): found (79 ms) by v14 - Sky Cinema +1
2014/07/06 20:53:39 21122C8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/07/06 20:53:39 21FE4F0 c admin2 (098C&000000/0644/EF15/98:293AF828D22CFD73AA935FED2BC85AA2): found (77 ms) by v14 - RTL2 HD
2014/07/06 20:53:39 2205078 c admin (098C&000000/0642/EF11/98:5615C8D024DF73BA6029C41927FF6C55): found (77 ms) by v14 - VOX HD
2014/07/06 20:53:43 21E9C28 c franzr (098C&000000/012E/000B/98:B33296AD935E8444855A9F38ABBFF72B): found (79 ms) by v14 - Sky Cinema +1
2014/07/06 20:53:49 21FE4F0 c admin2 (098C&000000/0644/EF15/98:79B09B625A575C2C1FC56EA424A1781F): found (78 ms) by v14 - RTL2 HD
2014/07/06 20:53:49 2205078 c admin (098C&000000/0642/EF11/98:68003E4D8144B0CD0987ACAA599A64F7): found (78 ms) by v14 - VOX HD
2014/07/06 20:53:50 21E9C28 c franzr (098C&000000/012E/000B/98:7BCE1CE63D4FFB13278975DE94541D97): found (78 ms) by v14 - Sky Cinema +1
2014/07/06 20:53:50 21122C8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
2014/07/06 20:53:52 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2014/07/06 20:53:52 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/07/06 20:53:52 21122C8 r hdplus [mouse] Setting baudrate to 115200 bps
2014/07/06 20:53:52 21122C8 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2014/07/06 20:53:52 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2014/07/06 20:53:57 21E9C28 c franzr (098C&000000/012E/000B/98:8200A3DDE2E6B35CB9DFCB43A1F52CF9): found (79 ms) by v14 - Sky Cinema +1
2014/07/06 20:53:59 21FE4F0 c admin2 (098C&000000/0644/EF15/98:0917068CFEC617923C2A4AC110396B28): found (77 ms) by v14 - RTL2 HD
2014/07/06 20:53:59 2205078 c admin (098C&000000/0642/EF11/98:89147AEE4EBC3E2DC0972C8671AA0978): found (78 ms) by v14 - VOX HD
2014/07/06 20:54:04 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
2014/07/06 20:54:04 21E9C28 c franzr (098C&000000/012E/000B/98:4E2041947B0F113A2BD9B1D964EC9430): found (79 ms) by v14 - Sky Cinema +1
2014/07/06 20:54:09 21FE4F0 c admin2 (098C&000000/0644/EF15/98:6543D1DF129BB2E49D396BF64A289BEC): found (77 ms) by v14 - RTL2 HD
2014/07/06 20:54:09 2205078 c admin (098C&000000/0642/EF11/98:FDC2A9FCE4D3205A207F0EFD100E47C5): found (83 ms) by v14 - VOX HD
2014/07/06 20:54:11 21E9C28 c franzr (098C&000000/012E/000B/98:CDDA4F3232591E88663621CDF078A053): found (80 ms) by v14 - Sky Cinema +1
2014/07/06 20:54:14 21122C8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
 
AW: HD01 will einfach nicht laufen

oscam nach der Änderung neu starten.
Dann den log von Anfang an hier abliefern.
Da siehst du dann mögliche Fehler beim einlesen der Karte
 
AW: HD01 will einfach nicht laufen

Hi

Und wir wollen noch mal die oscam conf und den Server sehen nach der Änderung und oscam Neustart.

Gruß Ralf
 
AW: HD01 will einfach nicht laufen

ok hier log
  • 2014/07/06 21:09:39 21122C8 r hdplus [mouse] card detected
  • 2014/07/06 21:09:41 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
  • 2014/07/06 21:09:41 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/07/06 21:09:41 21122C8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/07/06 21:09:41 21122C8 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
  • 2014/07/06 21:09:41 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
  • 2014/07/06 21:09:53 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
  • 2014/07/06 21:09:54 21122C8 r hdplus [mouse] detect native nagra card
  • 2014/07/06 21:10:04 21122C8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/07/06 21:10:15 21122C8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/07/06 21:10:17 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
  • 2014/07/06 21:10:17 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/07/06 21:10:17 21122C8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/07/06 21:10:17 21122C8 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
  • 2014/07/06 21:10:17 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
  • 2014/07/06 21:10:29 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
  • 2014/07/06 21:10:39 21122C8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/07/06 21:10:50 21122C8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/07/06 21:10:52 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
  • 2014/07/06 21:10:52 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/07/06 21:10:52 21122C8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/07/06 21:10:52 21122C8 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
  • 2014/07/06 21:10:52 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
  • 2014/07/06 21:11:03 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
  • 2014/07/06 21:11:03 21122C8 r hdplus [mouse] card system not supported
  • 2014/07/06 21:11:03 21122C8 r hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2014/07/06 21:11:05 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
  • 2014/07/06 21:11:05 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/07/06 21:11:05 21122C8 r hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
  • 2014/07/06 21:11:05 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
  • 2014/07/06 21:11:17 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
  • 2014/07/06 21:11:18 21122C8 r hdplus [mouse] detect native nagra card
  • 2014/07/06 21:11:28 21122C8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/07/06 21:11:39 21122C8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/07/06 21:11:41 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
  • 2014/07/06 21:11:41 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/07/06 21:11:41 21122C8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/07/06 21:11:41 21122C8 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
  • 2014/07/06 21:11:41 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
  • 2014/07/06 21:11:53 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
  • 2014/07/06 21:12:03 21122C8 r hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2014/07/06 21:12:14 21122C8 r hdplus [mouse] T1 Resync command error, trying to reactivate!
  • 2014/07/06 21:12:16 21122C8 r hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
  • 2014/07/06 21:12:16 21122C8 r hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2014/07/06 21:12:16 21122C8 r hdplus [mouse] Setting baudrate to 115200 bps
  • 2014/07/06 21:12:16 21122C8 r hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
  • 2014/07/06 21:12:16 21122C8 r hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
  • 2014/07/06 21:12:27 21122C8 r hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
  • 2014/07/06 21:12:27 21122C8 r hdplus [mouse] card system not supported
  • 2014/07/06 21:12:27 21122C8 r hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/07/06 21:12:27 21122C8 r hdplus [mouse] card initializing error

oscam config
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9731
# Read more:


[global]
disablelog = 0
loghistorysize = 4096
serverip = 192.168.178.41
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 0
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0


[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0




[newcamd]
port = port@098C:000000;port@1830:000000,003411,000080
key = 0102030405060708091011121314
keepalive = 1


[cccam]
port = 34000
serverip = 0.0.0.0
nodeid = EFB6547C10CB1584
version = 2.3.0
reshare = 10
reshare_mode = 0
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000


[webif]
httpport = 16002
serverip = 192.168.178.41
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httphelplang = de
httpcert =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 0
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 15
httposcamlabel = OSCam
http_status_log = 1

oscam server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9731
# Read more:


[reader]
label = v14
protocol = mouse
device = /dev/Sky
services = sky,sky-hd,sky-ppv,sky-hdplus,sky-3d
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:52,64,6A,9C,A1,91,96,98
detect = cd
ident = 098C:000000
group = 1
emmcache = 1,1,3
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 00098C
ndsversion = 2


[reader]
label = hdplus
protocol = mouse
device = /dev/HD+
services = hdplus
smargopatch = 1
autospeed = 0
caid = 1830
boxkey = A76####37C
rsakey = BF3############DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
ndsversion = 2
 
Zuletzt bearbeitet von einem Moderator:
AW: HD01 will einfach nicht laufen

Hi,

dann mach mal die beiden letzten Schalter nach oben und trag bei mhz 600 ein.

Grüße
Bombadil
 
AW: HD01 will einfach nicht laufen

immer noch needinit. hab mal was gelesen von 2700mhz wen oscam neuer als 9200 ist wie muss ich da reader einstellen?
 
AW: HD01 will einfach nicht laufen

Hi,

das gilt für den internen Reader oder Smargo einer E² Box. Du hast einen Thin oder ähnliches. Hat sich im Log was verändert?

Grüße
Bombadil
 
Zurück
Oben