HD+ Karte geht nicht mehr mit Oscam

Es wird 2014/01/26 21:21:35 7ECE78 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/26 21:21:35 7ECE78 r HDplusHD02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2014/01/26 21:21:35 7ECE78 r HDplusHD02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/26 21:21:37 7ECE78 r HDplusHD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/01/26 21:21:37 7ECE78 r HDplusHD02 [internal] card system not supported
2014/01/26 21:21:37 7ECE78 r HDplusHD02 [internal] Normal mode failed, reverting to Deprecated Mode
2014/01/26 21:21:38 7ECE78 r HDplusHD02 [internal] ATR: xxx
2014/01/26 21:21:38 7ECE78 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/26 21:21:38 7ECE78 r HDplusHD02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/01/26 21:21:38 7ECE78 r HDplusHD02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/26 21:21:39 7ECE78 r HDplusHD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/01/26 21:21:40 7ECE78 r HDplusHD02 [internal] detect native nagra card
2014/01/26 21:21:41 7ECE78 r HDplusHD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/01/26 21:21:42 7ECE78 r HDplusHD02 [internal] T1 Resync command error, trying to reactivate!
2014/01/26 21:21:44 7ECE78 r HDplusHD02 [internal] ATR: xxx
2014/01/26 21:21:44 7ECE78 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/26 21:21:44 7ECE78 r HDplusHD02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2014/01/26 21:21:44 7ECE78 r HDplusHD02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/26 21:21:46 7ECE78 r HDplusHD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/01/26 21:21:48 7ECE78 r HDplusHD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/01/26 21:21:50 7ECE78 r HDplusHD02 [internal] T1 Resync command error, trying to reactivate!
2014/01/26 21:21:51 7ECE78 r HDplusHD02 [internal] ATR: xxx
2014/01/26 21:21:51 7ECE78 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/26 21:21:51 7ECE78 r HDplusHD02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2014/01/26 21:21:51 7ECE78 r HDplusHD02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/26 21:21:53 7ECE78 r HDplusHD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/01/26 21:21:53 7ECE78 r HDplusHD02 [internal] card system not supported
2014/01/26 21:21:53 7ECE78 r HDplusHD02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/26 21:21:53 7ECE78 r HDplusHD02 [internal] card initializing error

[reader]
label = HDplusHD02
protocol = internal
device = /dev/sci0
detect = CD
cardmhz = 368
caid = 1843
rsakey = BF*********************************************************************************************************************
boxkey = A7*********7C
Services = HD+
group = 1
emmcache = 1,1,2

2014/01/26 22:32:13 774004F8 r HDplusHD02 [internal] card detected
2014/01/26 22:32:15 774004F8 r HDplusHD02 [internal] ATR: xxx
2014/01/26 22:32:15 774004F8 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/26 22:32:15 774004F8 r HDplusHD02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2014/01/26 22:32:15 774004F8 r HDplusHD02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/26 22:32:17 774004F8 r HDplusHD02 [internal] Warning: Card returned error on setting ifsd value to 160
2014/01/26 22:32:18 774004F8 r HDplusHD02 [internal] detect native nagra card
2014/01/26 22:32:20 774004F8 r HDplusHD02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/01/26 22:32:21 774004F8 r HDplusHD02 [internal] T1 Resync command error, trying to reactivate!
2014/01/26 22:32:23 774004F8 r HDplusHD02 [internal] ATR: xxx
2014/01/26 22:32:23 774004F8 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/26 22:32:23 774004F8 r HDplusHD02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
2014/01/26 22:32:23 774004F8 r HDplusHD02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)