HD+ im Smargo Einstellungen Oscam

[silberruecken56]

Hallo,

kriege die Einstellungen in oscam.server nicht hin.

hier mal ein Auszug aus der logfile:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu May 9 15:14:14 2013
-------------------------------------------------------------------------------
2013/05/09 15:14:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8576 (sh4-linux-stapi-ssl-libusb-pcsc)
2013/05/09 15:14:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7006
2013/05/09 15:14:14 0 s services reloaded: 0 services freed, 16 services loaded, rejected 0
2013/05/09 15:14:14 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/05/09 15:14:14 0 s signal handling initialized
2013/05/09 15:14:14 0 s 210 service-id's loaded in 3ms
2013/05/09 15:14:14 0 s newcamd: initialized (fd=5, port=34000)
2013/05/09 15:14:14 0 s -> CAID: 1702 PROVID: 000000
2013/05/09 15:14:14 0 s newcamd: initialized (fd=6, port=34001)
2013/05/09 15:14:14 0 s -> CAID: 1843 PROVID: 000000, 003411, 008011
2013/05/09 15:14:14 0 s sky_v14 [internal] creating thread for device /dev/sci0
2013/05/09 15:14:14 0 s hdplus [smartreader] creating thread for device Serial:Reader B8DAF0D
2013/05/09 15:14:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/09 15:14:14 0 s waiting for local card init
2013/05/09 15:14:14 6562D0 r sky_v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=5, cardmhz=5)
2013/05/09 15:14:14 657A78 r hdplus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/05/09 15:14:14 6562D0 r sky_v14 [internal] card detected
2013/05/09 15:14:14 66ED70 h webif: decompressed 52462 bytes back into 151752 bytes
2013/05/09 15:14:14 657A78 r Found reader with serial Reader B8DAF0D at 001:003
2013/05/09 15:14:14 66ED70 h HTTP Server listening on port 16002
2013/05/09 15:14:14 657A78 r Found smartreader device Serial:Reader B8DAF0D
2013/05/09 15:14:16 657A78 r hdplus [smartreader] Reader initialized (device=Serial:Reader B8DAF0D, detect=cd, mhz=5, cardmhz=5)
2013/05/09 15:14:16 6562D0 r sky_v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2013/05/09 15:14:16 6562D0 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2013/05/09 15:14:16 6562D0 r sky_v14 [internal] Calculated work ETU is 465.00 us
2013/05/09 15:14:17 6562D0 r sky_v14 [internal] ATR Fsmax is: 5 Mhz, clocking card to 0.05
2013/05/09 15:14:17 657A78 r hdplus [smartreader] card detected
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] Card type: P1TV
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] Rom version: 20AA
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] parental lock setting: FF FF FF FF
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] type: VideoGuard Sky Germany (098C), caid: 098C
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] ready for requests
2013/05/09 15:14:18 6562D0 r sky_v14 [internal] found card system videoguard2
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] card detected
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] type: VideoGuard Sky Germany (098C)
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 007b, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 008e, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00c0, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00c7, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00c8, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00c9, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00ca, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00f3, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00fa, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:18 6562D0 r sky_v14 [videoguard2] tier: 00ff, expiry date: 2013/07/07-01:00:00
2013/05/09 15:14:20 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 15:14:20 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 15:14:20 657A78 r hdplus [smartreader] Calculated work ETU is 640.00 us
2013/05/09 15:14:20 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.20 Mhz (specified in reader->mhz)
2013/05/09 15:14:21 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 15:14:22 657A78 r hdplus [smartreader] detect native nagra card
2013/05/09 15:14:23 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 15:14:24 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 15:14:27 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 15:14:27 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 15:14:27 657A78 r hdplus [smartreader] Calculated work ETU is 10.00 us
2013/05/09 15:14:28 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.20 Mhz (specified in reader->mhz)
2013/05/09 15:14:29 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 15:14:30 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 15:14:31 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 15:14:34 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 15:14:34 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 15:14:34 657A78 r hdplus [smartreader] Calculated work ETU is 10.00 us
2013/05/09 15:14:34 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.20 Mhz (specified in reader->mhz)
2013/05/09 15:14:35 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 15:14:35 657A78 r hdplus [smartreader] card system not supported
2013/05/09 15:14:35 657A78 r hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/05/09 15:14:38 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 15:14:38 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 15:14:38 657A78 r hdplus [smartreader] Calculated work ETU is 116.25 us
2013/05/09 15:14:39 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.20 Mhz (specified in reader->mhz)
2013/05/09 15:14:40 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 15:14:41 657A78 r hdplus [smartreader] detect native nagra card
2013/05/09 15:14:42 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
switch log file

​

​

Danke für die Unterstützung

gruß

 

[mxer]

AW: HD+ im Smargo Einstellungen Oscam

Die Karte wird erkannt/ gelesen!

In oscam.server ändern:
MHz = 368
CardMHz = 368

Oscam neu starten.

 

[silberruecken56]

AW: HD+ im Smargo Einstellungen Oscam

Leider kein Erfolg ???

Hier nochmal ein Logfileauszug:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu May 9 17:50:14 2013
-------------------------------------------------------------------------------
2013/05/09 17:50:14 657A78 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/05/09 17:50:14 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8576 (sh4-linux-stapi-ssl-libusb-pcsc)
2013/05/09 17:50:15 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/05/09 17:50:16 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 17:50:17 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 17:50:18 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 17:50:21 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 17:50:21 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 17:50:21 657A78 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/05/09 17:50:21 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/05/09 17:50:22 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 17:50:22 657A78 r hdplus [smartreader] card system not supported
2013/05/09 17:50:22 657A78 r hdplus [smartreader] card initializing error
2013/05/09 17:50:23 0 s init for all local cards done
2013/05/09 17:50:23 0 s anti cascading disabled
2013/05/09 17:50:23 66E4F8 c plain dvbapi-client granted (dvbapi, au=auto (3 reader))
2013/05/09 17:50:23 66E4F8 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/05/09 17:50:23 66E4F8 c [ADD PID 0] CAID: 1830 ECM_PID: 1CAA PROVID: 000000
2013/05/09 17:50:23 66E4F8 c [ADD PID 1] CAID: 1843 ECM_PID: 19AA PROVID: 000000
2013/05/09 17:50:23 66E4F8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BAA PROVID: 000000
2013/05/09 17:50:23 66E4F8 c [ADD PID 3] CAID: 098C ECM_PID: 1AAA PROVID: 000000
2013/05/09 17:50:23 66E4F8 c [ADD PID 4] CAID: 1860 ECM_PID: 1EAA PROVID: 000000
2013/05/09 17:50:23 66E4F8 c Found 5 ECMpids and 4 STREAMpids in PMT
2013/05/09 17:50:23 66E4F8 c New program number: EF15 (RTL 2 HD) [pmt_list_management 3]
2013/05/09 17:50:24 6562D0 r sky_v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/05/09 17:50:24 66E4F8 c dvbapi (098C&000000/0000/EF15/98:ABE58971BB7D0415CC32C529A0B64DEC): not found (84 ms) by sky_v14
2013/05/09 17:50:24 66E4F8 c dvbapi (098C&000000/0000/EF15/98:ABE58971BB7D0415CC32C529A0B64DEC): not found (1 ms) by sky_v14
2013/05/09 17:50:24 66E4F8 c ERROR: Can't decode channel
2013/05/09 17:50:24 66E4F8 c dvbapi (098C&000000/0000/EF15/98:ABE58971BB7D0415CC32C529A0B64DEC): not found (1 ms) by sky_v14

oscam.server :_

Spoiler

[reader]
label = hdplus
enable = 1
protocol = smartreader
device = Serial:Reader B8DAF0D
smargopatch = 1
caid = 1843
rsakey = BF...
boxkey = A7....
detect = cd
mhz = 368
cardmhz = 368
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,3,2
blockemm-unknown = 1

 

[mxer]

AW: HD+ im Smargo Einstellungen Oscam

Mehrere Reader im Einsatz? Wegen group = 2.
Nimm mal testweise die idents raus.

 

[gooseman]

AW: HD+ im Smargo Einstellungen Oscam

nimm mal die idents raus wie mxer schon sagte.

Wie hast du deinen Smargo eingestellt??? Fix oder auf Autoswitch.

Falls auf Autoswitch, dann mach mal auch testweise die cardmhz und mhz komplett weg und dann einen Neustart von Oscam

 

[silberruecken56]

AW: HD+ im Smargo Einstellungen Oscam

Hab ich rausgenommen, leider kein Erfolg.

Eine V14 läuft noch im internen Leser eines Piungulux +.
Die funktioniert aber.

loG:

Spoiler

2013/05/09 18:10:31 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 18:10:35 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 18:10:35 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 18:10:35 657A78 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/05/09 18:10:35 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/05/09 18:10:36 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 18:10:36 657A78 r hdplus [smartreader] card system not supported
2013/05/09 18:10:36 657A78 r hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/05/09 18:10:39 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 18:10:39 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 18:10:39 657A78 r hdplus [smartreader] Calculated work ETU is 100.81 us
2013/05/09 18:10:39 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/05/09 18:10:40 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 18:10:41 657A78 r hdplus [smartreader] detect native nagra card
2013/05/09 18:10:42 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 18:10:43 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 18:10:47 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 18:10:47 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 18:10:47 657A78 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/05/09 18:10:47 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/05/09 18:10:48 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 18:10:49 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 18:10:50 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 18:10:53 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 18:10:53 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 18:10:53 657A78 r hdplus [smartreader] Calculated work ETU is 8.67 us
2013/05/09 18:10:53 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2013/05/09 18:10:54 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 18:10:54 657A78 r hdplus [smartreader] card system not supported
2013/05/09 18:10:54 657A78 r hdplus [smartreader] card initializing error
2013/0​

oscam.user:

Spoiler

[account]
user = dvbapi
au = 1
group = 1
betatunnel = 1833.FFFF:1702 # Nur für S02 nötig

[account]
user = userhdplus
pwd = passhdplus
group = 2
au = hdplus
caid = 1843 #wenn eine HD02 genutzt wird, sollte der Caid 1843 lauten

Bitte um Hilfestellung.

 

[mxer]

AW: HD+ im Smargo Einstellungen Oscam

Nimm die # mit den Anhang dahinter mal weg.

 

[silberruecken56]

AW: HD+ im Smargo Einstellungen Oscam

Bringt leider auch keinen Erfolg ?

Was kann ich noch tun ??

 

[mxer]

AW: HD+ im Smargo Einstellungen Oscam

Hast Du den Client auch group = 2 gegeben?

Smargo auf welcher Version?
Stelle den mal auf:
auto
normal
0
0
wenn es eine 1.05 oder kleiner ist.

 

[silberruecken56]

AW: HD+ im Smargo Einstellungen Oscam

Oscam.user:

Spoiler

[account]
user = dvbapi
au = 1
group = 1

[account]
user = userhdplus
pwd = passhdplus
group = 2
au = 1

 

[mxer]

AW: HD+ im Smargo Einstellungen Oscam

Da geht aber nur userhdplus damit.
Das mit dem Smargo mal geprüft?

 

[gooseman]

AW: HD+ im Smargo Einstellungen Oscam

wieso fügst die Gruppe 2 von hd+ nicht deinem dvbapi hinzu, wenn ich fragen darf???

 

[silberruecken56]

Hab jetzt nur group=1 vergeben und die smargo-Einstellungen geprüft !

Leider auch kein Erfolg.

Hallo mxer,

was heißt: Da geht aber nur userhdplus damit ??

 

[gooseman]

AW: HD+ im Smargo Einstellungen Oscam

Spoiler

[account]
user = dvbapi
au = hdplus
emmreassembly = 1
group = 1,2

den anderen account mit userhplus und passhdplus kannst du deaktivieren.
So wie ich das jetzt sehe, schaust du schon mit dem Receiver, oder??
zeig doch mal bitte auch deine anderen Sachen, oscam.conf, oscam.server, da ja deine V14 Karte auch nicht geht, so wie ich das laut Log sehe.

 

[silberruecken56]

AW: HD+ im Smargo Einstellungen Oscam

Die V14 in internen Reader des Pingulux+ läuft problemlos.

oscam.conf:

Spoiler

[global]
nice = -1
usrfile = /var/log/oscamuser.log
logfile = /var/log/oscam.log

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox #beim Pingulux kein Eintrag nötig

[webif]
httpport = 16002
httpuser = ********
httppwd = ********
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.dvapi:

Spoiler

P: 098C**
P: 1843**
I:0

oscam.server:

Spoiler

[reader]
label = sky_v14
protocol = internal
device = /dev/sci0
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 5
cardmhz = 5
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1

[reader]
label = hdplus
enable = 1
protocol = smartreader
device = Serial:Reader B8DAF0D
smargopatch = 1
caid = 1843
rsakey = BF**
boxkey = A7***
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

oscam.user:

Spoiler

[account]
user = dvbapi
au = hdplus
emmreassembly = 1
group = 1,2

logfile:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu May 9 19:39:34 2013
-------------------------------------------------------------------------------
2013/05/09 19:39:34 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:39:34 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8576 (sh4-linux-stapi-ssl-libusb-pcsc)
2013/05/09 19:39:35 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:39:38 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:39:38 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:39:38 657A78 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:39:38 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:39:39 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:39:40 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:39:41 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:39:44 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:39:44 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:39:44 657A78 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:39:45 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:39:46 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:39:46 657A78 r hdplus [smartreader] card system not supported
2013/05/09 19:39:46 657A78 r hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/05/09 19:39:49 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:39:49 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:39:49 657A78 r hdplus [smartreader] Calculated work ETU is 108.45 us
2013/05/09 19:39:49 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:39:50 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:39:51 657A78 r hdplus [smartreader] detect native nagra card
2013/05/09 19:39:52 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:39:53 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:39:56 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:39:56 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:39:56 657A78 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:39:57 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:39:58 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:39:59 657A78 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:40:00 657A78 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:40:03 657A78 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:40:03 657A78 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:40:03 657A78 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:40:03 657A78 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:40:04 657A78 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:40:04 657A78 r hdplus [smartreader] card system not supported
2013/05/09 19:40:04 657A78 r hdplus [smartreader] card initializing error
2013/05/09 19:40:05 0 s init for all local cards done
2013/05/09 19:40:05 0 s anti cascading disabled
2013/05/09 19:40:05 66CE98 c plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2013/05/09 19:40:05 66CE98 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/05/09 19:40:05 66CE98 c Found 0 ECMpids and 7 STREAMpids in PMT
2013/05/09 19:40:05 66CE98 c New program number: 6E47 (0000:6E47 unknown) [pmt_list_management 3]
2013/05/09 19:50:13 666D50 h Restart requested by WebIF from 192.168.178.26
2013/05/09 19:50:13 666D50 h restart oscam requested
2013/05/09 19:50:18 666D50 h HTTP Server stopped
2013/05/09 19:50:18 0 s killing client dvbapi
2013/05/09 19:50:18 0 s sky_v14 [videoguard2] Killing reader
2013/05/09 19:50:18 0 s hdplus [smartreader] Killing reader
2013/05/09 19:50:18 0 s userdb 2 accounts freed
2013/05/09 19:50:18 0 s readerdb 2 readers freed
2013/05/09 19:50:18 0 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu May 9 19:50:18 2013
-------------------------------------------------------------------------------
2013/05/09 19:50:18 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8576 (sh4-linux-stapi-ssl-libusb-pcsc)
2013/05/09 19:50:18 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 19245
2013/05/09 19:50:18 0 s services reloaded: 0 services freed, 16 services loaded, rejected 0
2013/05/09 19:50:18 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/05/09 19:50:18 0 s signal handling initialized
2013/05/09 19:50:18 0 s 210 service-id's loaded in 9ms
2013/05/09 19:50:18 0 s newcamd: initialized (fd=5, port=34000)
2013/05/09 19:50:18 0 s -> CAID: 1702 PROVID: 000000
2013/05/09 19:50:18 0 s newcamd: initialized (fd=6, port=34001)
2013/05/09 19:50:18 0 s -> CAID: 1843 PROVID: 000000, 003411, 008011
2013/05/09 19:50:18 0 s sky_v14 [internal] creating thread for device /dev/sci0
2013/05/09 19:50:18 0 s hdplus [smartreader] creating thread for device Serial:Reader B8DAF0D
2013/05/09 19:50:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/09 19:50:18 0 s waiting for local card init
2013/05/09 19:50:18 657AE8 r hdplus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/05/09 19:50:18 656340 r sky_v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=5, cardmhz=5)
2013/05/09 19:50:18 664A30 h webif: decompressed 52462 bytes back into 151752 bytes
2013/05/09 19:50:18 664A30 h HTTP Server listening on port 16002
2013/05/09 19:50:18 657AE8 r Found reader with serial Reader B8DAF0D at 001:007
2013/05/09 19:50:18 657AE8 r Found smartreader device Serial:Reader B8DAF0D
2013/05/09 19:50:18 657AE8 r hdplus [smartreader] Reader initialized (device=Serial:Reader B8DAF0D, detect=cd, mhz=357, cardmhz=357)
2013/05/09 19:50:19 657AE8 r hdplus [smartreader] card detected
2013/05/09 19:50:19 656340 r sky_v14 [internal] card detected
2013/05/09 19:50:21 656340 r sky_v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2013/05/09 19:50:21 656340 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2013/05/09 19:50:21 656340 r sky_v14 [internal] Calculated work ETU is 465.00 us
2013/05/09 19:50:22 656340 r sky_v14 [internal] ATR Fsmax is: 5 Mhz, clocking card to 0.05
2013/05/09 19:50:23 656340 r sky_v14 [internal] Card type: P1TV
2013/05/09 19:50:23 656340 r sky_v14 [internal] Rom version: 20AA
2013/05/09 19:50:23 656340 r sky_v14 [internal] parental lock setting: FF FF FF FF
2013/05/09 19:50:23 656340 r sky_v14 [internal] type: VideoGuard Sky Germany (098C), caid: 098C
2013/05/09 19:50:23 656340 r sky_v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2013/05/09 19:50:23 656340 r sky_v14 [internal] ready for requests
2013/05/09 19:50:23 656340 r sky_v14 [internal] found card system videoguard2
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] card detected
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] type: VideoGuard Sky Germany (098C)
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 007b, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 008e, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00c0, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00c7, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00c8, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00c9, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00ca, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00f3, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00fa, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:23 656340 r sky_v14 [videoguard2] tier: 00ff, expiry date: 2013/07/07-01:00:00
2013/05/09 19:50:25 657AE8 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:50:25 657AE8 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:50:25 657AE8 r hdplus [smartreader] Calculated work ETU is 8.96 us
2013/05/09 19:50:25 657AE8 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:50:26 657AE8 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:50:26 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r8576 (sh4-linux-stapi-ssl-libusb-pcsc)
2013/05/09 19:50:27 657AE8 r hdplus [smartreader] detect native nagra card
2013/05/09 19:50:28 657AE8 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:50:29 657AE8 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:50:32 657AE8 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:50:32 657AE8 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:50:32 657AE8 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:50:32 657AE8 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:50:33 657AE8 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:50:34 657AE8 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:50:35 657AE8 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:50:39 657AE8 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:50:39 657AE8 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:50:39 657AE8 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:50:39 657AE8 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:50:40 657AE8 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:50:40 657AE8 r hdplus [smartreader] card system not supported
2013/05/09 19:50:40 657AE8 r hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2013/05/09 19:50:43 657AE8 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:50:43 657AE8 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:50:43 657AE8 r hdplus [smartreader] Calculated work ETU is 108.45 us
2013/05/09 19:50:43 657AE8 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:50:44 657AE8 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:50:45 657AE8 r hdplus [smartreader] detect native nagra card
2013/05/09 19:50:46 657AE8 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:50:47 657AE8 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:50:50 657AE8 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:50:50 657AE8 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:50:50 657AE8 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:50:51 657AE8 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:50:52 657AE8 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:50:53 657AE8 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/09 19:50:54 657AE8 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2013/05/09 19:50:57 657AE8 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/05/09 19:50:57 657AE8 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/09 19:50:57 657AE8 r hdplus [smartreader] Calculated work ETU is 9.33 us
2013/05/09 19:50:57 657AE8 r hdplus [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.43 Mhz (specified in reader->mhz)
2013/05/09 19:50:58 657AE8 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2013/05/09 19:50:58 657AE8 r hdplus [smartreader] card system not supported
2013/05/09 19:50:58 657AE8 r hdplus [smartreader] card initializing error
2013/05/09 19:50:59 0 s init for all local cards done
2013/05/09 19:50:59 0 s anti cascading disabled
2013/05/09 19:50:59 66AE18 c plain dvbapi-client granted (dvbapi, au=on (1 reader))
2013/05/09 19:50:59 66AE18 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/05/09 19:50:59 66AE18 c Found 0 ECMpids and 7 STREAMpids in PMT
2013/05/09 19:50:59 66AE18 c New program number: 6E47 (0000:6E47 unknown) [pmt_list_management 3]