HD+ HD02 Error Bitte um Hilfe

[corequad]

Hi, Habe mir heute die Smart HD+ gekauft und im Reader war HD+ drinne da mein zweiter Reader noch nicht da ist habe ich die HD+ raus gemacht die configs für Smart HD+ rein und geschaut ob die Karte geht.

So jetzt die Configs wieder zurück zu HD+ reader wieder auf 368 mhz gestellt karte rein und siehe da nix nix ich verzweifle sie lief davor bevor ich sie raus genommen habe jetzt steht da Error No Entitlements found

Spoiler

• 2017/03/08 20:50:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9787 (i486-linux-gnu)
• 2017/03/08 20:50:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1878
• 2017/03/08 20:50:14 0 s services reloaded: 0 services freed, 15 services loaded, rejected 0
• 2017/03/08 20:50:14 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
• 2017/03/08 20:50:14 0 s signal handling initialized
• 2017/03/08 20:50:14 0 s 171 service-id's loaded in 2ms
• 2017/03/08 20:50:14 0 s 155 tier-id's loaded
• 2017/03/08 20:50:14 0 s 56 provid's loaded
• 2017/03/08 20:50:14 0 s cccam: initialized (fd=5, port=)
• 2017/03/08 20:50:14 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
• 2017/03/08 20:50:14 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
• 2017/03/08 20:50:14 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
• 2017/03/08 20:50:14 0 s Binary without Griffin module - no EMM processing for Griffin possible!
• 2017/03/08 20:50:14 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
• 2017/03/08 20:50:14 0 s HDPlus [mouse] creating thread for device /dev/ttyUSB0
• 2017/03/08 20:50:14 0 s waiting for local card init
• 2017/03/08 20:50:14 9213E30 h webif: decompressed 77081 bytes back into 201228 bytes
• 2017/03/08 20:50:14 9213E30 h HTTP Server running. ip=:: port=
• 2017/03/08 20:50:15 9202100 r HDPlus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
• 2017/03/08 20:50:15 9202100 r HDPlus [mouse] card detected
• 2017/03/08 20:50:19 9202100 r HDPlus [mouse] Error activating card.
• 2017/03/08 20:50:28 0 --- Skipped 2 duplicated log lines ---
• 2017/03/08 20:50:28 9202100 r HDPlus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/03/08 20:50:28 9202100 r HDPlus [mouse] card initializing error
• 2017/03/08 20:50:29 0 s init for all local cards done

 

[Tec-Hi]

Hi

hat HD+ jetzt auch S02 Karten ?

wenn die Einstellungen die gleichen sind, nur Oscam neustarten.

HF

 

[corequad]

sry meine natürlich die HD02 xD

 

[dodo83]

eine 368 Taktung passt zur Easymouse nicht, also MHZ so einstellen wie auf der Maus

ansonsten mal auch den Reader posten und die Maus Einstellung, der Server ist ... ??

 

[corequad]

Hi, Ist ein Apollo Reader der Jumper ist auf 5 volt und auf T1 wie vorher es lief alles

glaube das ist mit 3,68,10,6 mhz vollversion.

 

[dodo83]

glauben ist gut .....
dann stelle den mal auf 6MHZ und im Reader bei MHZ 600, neu starten

 

[corequad]

Hat nicht Geholfen ...

Spoiler

• 2017/03/08 21:32:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9787 (i486-linux-gnu)
• 2017/03/08 21:32:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1437
• 2017/03/08 21:32:02 0 s services reloaded: 0 services freed, 15 services loaded, rejected 0
• 2017/03/08 21:32:02 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
• 2017/03/08 21:32:02 0 s signal handling initialized
• 2017/03/08 21:32:02 0 s 171 service-id's loaded in 2ms
• 2017/03/08 21:32:03 0 s 155 tier-id's loaded
• 2017/03/08 21:32:03 0 s 56 provid's loaded
• 2017/03/08 21:32:03 0 s cccam: initialized (fd=5, port=)
• 2017/03/08 21:32:03 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
• 2017/03/08 21:32:03 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
• 2017/03/08 21:32:03 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
• 2017/03/08 21:32:03 0 s Binary without Griffin module - no EMM processing for Griffin possible!
• 2017/03/08 21:32:03 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
• 2017/03/08 21:32:03 0 s HDPlus [mouse] creating thread for device /dev/ttyUSB0
• 2017/03/08 21:32:03 0 s waiting for local card init
• 2017/03/08 21:32:03 91BDD40 h webif: decompressed 77081 bytes back into 201228 bytes
• 2017/03/08 21:32:03 91BDD40 h HTTP Server running. ip=:: port=
• 2017/03/08 21:32:03 91AC100 r HDPlus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
• 2017/03/08 21:32:04 91AC100 r HDPlus [mouse] card detected
• 2017/03/08 21:32:07 91AC100 r HDPlus [mouse] Error activating card.
• 2017/03/08 21:32:16 0 --- Skipped 2 duplicated log lines ---
• 2017/03/08 21:32:16 91AC100 r HDPlus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/03/08 21:32:16 91AC100 r HDPlus [mouse] card initializing error
• 2017/03/08 21:32:17 0 s init for all local cards done

 

[Derek Buegel]

Wie geheim ist der Reader?

ansonsten mal auch den Reader posten

MfG

 

[corequad]

sry hier der reader

Spoiler

[reader]
label = HDPlus
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
caid = 1843
boxkey = A7xxxxxxxxxx37C
rsakey = BF3xxxxxxxxxxxxxxxxxxxxxxxxxxxx4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
cccreshare = 0

 

[Derek Buegel]

Spoiler

[reader]

[reader]
label                         = HDPlus
protocol                      = mouse
device                        = /dev/ttyUSB0
services                      = hdplus
autospeed                     = 0
caid                          = 1843
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect                        = cd
mhz                           = 358
cardmhz                       = 358
ident                         = 1843:000000,003411,008011
group                         = 1
emmcache                      = 1,1,2,0

Teste mal den Reader so.
Tippschalter wieder umstellen.

MfG

 

[corequad]

Es gibt kein Tippschalter beim Apollo

 

[Tec-Hi]

Hi

jetzt wid es noch HD01 ...

mach so einfach wie es nur geht :

Spoiler

label = HDPlus
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
caid = 1843
boxkey = A7xxxxxxxxxx37C
rsakey = BF3xxxxxxxxxxxxxxxxxxxxxxxxxxxx4DD5
detect = cd
cardmhz = 368
group = 1
emmcache = 1,1,2

HF

 

[Derek Buegel]

Mist.
Dann nimm so

Spoiler

[reader]
label                         = HDPlus
protocol                      = mouse
device                        = /dev/ttyUSB0
services                      = hdplus
autospeed                     = 1
caid                          = 1843
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect                        = cd
# mhz                           = 358
# cardmhz                       = 358
ident                         = 1843:000000,003411,008011
group                         = 1
emmcache                      = 1,1,2,0

Mal sehen was passiert (Log).

MfG

 

[bubbl]

Log bitte wenn die Karte eingelesen wird

 

[corequad]

Hier die log selbe fehlermeldung,kann es sein das die Karte futsch ist oder der Reader ? denn bevor ich den gezogen habe lief alles und Entitlements waren auch da mit cardok oh mann verzweifle

• 
  

Spoiler

• 2017/03/08 22:35:43 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9787 (i486-linux-gnu)
• 2017/03/08 22:35:43 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2367
• 2017/03/08 22:35:43 0 s services reloaded: 0 services freed, 15 services loaded, rejected 0
• 2017/03/08 22:35:43 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
• 2017/03/08 22:35:43 0 s signal handling initialized
• 2017/03/08 22:35:43 0 s 171 service-id's loaded in 2ms
• 2017/03/08 22:35:43 0 s 155 tier-id's loaded
• 2017/03/08 22:35:43 0 s 56 provid's loaded
• 2017/03/08 22:35:43 0 s cccam: initialized (fd=5, port=)
• 2017/03/08 22:35:43 0 s Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
• 2017/03/08 22:35:43 0 s Binary without TONGFANG module - no EMM processing for TONGFANG possible!
• 2017/03/08 22:35:43 0 s Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
• 2017/03/08 22:35:43 0 s Binary without Griffin module - no EMM processing for Griffin possible!
• 2017/03/08 22:35:43 0 s Binary without DGCrypt module - no EMM processing for DGCrypt possible!
• 2017/03/08 22:35:43 0 s HDPlus [mouse] creating thread for device /dev/ttyUSB0
• 2017/03/08 22:35:43 0 s waiting for local card init
• 2017/03/08 22:35:43 97DDE30 h webif: decompressed 77081 bytes back into 201228 bytes
• 2017/03/08 22:35:43 97DDE30 h HTTP Server running. ip=:: port=
• 2017/03/08 22:35:43 97CC100 r HDPlus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2017/03/08 22:35:44 97CC100 r HDPlus [mouse] card detected
• 2017/03/08 22:35:47 97CC100 r HDPlus [mouse] Error activating card.
• 2017/03/08 22:35:56 0 --- Skipped 2 duplicated log lines ---
• 2017/03/08 22:35:56 97CC100 r HDPlus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2017/03/08 22:35:56 97CC100 r HDPlus [mouse] card initializing error
• 2017/03/08 22:35:57 0 s init for all local cards done