Golden media 990 tvsat italia

[gianniblu01]

Danke an alle dir mir helfen
geht immer noch nicht ,
hier mein log.

Spoiler

>> OSCam << cardserver started at Mon Nov 12 20:55:15 2018
-------------------------------------------------------------------------------
2018/11/12 20:55:15 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9963 (sh4-linux)
2018/11/12 20:55:15 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 9362
2018/11/12 20:55:15 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/11/12 20:55:15 0 s signal handling initialized
2018/11/12 20:55:15 0 s monitor: initialized (fd=6, port=988)
2018/11/12 20:55:15 0 s cs357x: initialized (fd=7, port=34001)
2018/11/12 20:55:15 0 s newcamd: initialized (fd=8, port=34001)
2018/11/12 20:55:15 0 s -> CAID: 183D PROVID: 005411
2018/11/12 20:55:15 0 s Tivusat [internal] creating thread for device /dev/sci0
2018/11/12 20:55:15 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2018/11/12 20:55:15 50A630 r Tivusat [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2018/11/12 20:55:15 0 s waiting for local card init
2018/11/12 20:55:15 50C460 h webif: decompressed 154919 bytes back into 366240 bytes
2018/11/12 20:55:15 50C460 h HTTP Server running. ip=0.0.0.0 port=88
2018/11/12 20:55:16 50A630 r Tivusat [internal] card detected
2018/11/12 20:55:37 50A630 r Tivusat [internal] Error activating card.
2018/11/12 20:55:50 50A630 r Tivusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2018/11/12 20:55:50 50A630 r Tivusat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/11/12 20:55:50 50A630 r Tivusat [internal] Calculated work ETU is 8.70 us reader mhz = 368
2018/11/12 20:55:51 50A630 r Tivusat [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2018/11/12 20:55:52 50A630 r Tivusat [internal] detect nagra tiger card
2018/11/12 20:55:52 50A630 r Tivusat [internal] card system not supported
2018/11/12 20:55:52 50A630 r Tivusat [internal] Normal mode failed, reverting to Deprecated Mode
2018/11/12 20:56:10 50A630 r Tivusat [internal] Error activating card.
2018/11/12 20:56:54 0 --- Skipped 2 duplicated log lines ---
2018/11/12 20:56:54 50A630 r Tivusat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/11/12 20:56:54 50A630 r Tivusat [internal] card initializing error
2018/11/12 20:56:55 0 s init for all local cards done
2018/11/12 20:56:55 0 s anti cascading disabled

 

[sodex]

dann zeig doch mal die "oscam.server" "oscam.user" "oscam.conf"
hast du die Caid deiner Karte und mhz und cardmhz angepasst ?
MfG sodex

 

[gianniblu01]

hallo
welche Datei brauche ich genau um tvusat anzuschauen ,und brauche ich noch andere cams dazu .
danke im voraus

 

[conga]

Bitte Poste die "oscam.server" "oscam.user" "oscam.conf" damit bei der Konfiguration von OScam geholfen werden kann.

 

[ultima]

Welche Tivusat Karte hast du denn, blau/weiß oder goldene?
Welches Image ist auf der Box und welche Oscam ist installiert?

 

[gianniblu01]

wie poste ich oscam server und user
hab oscam monthly v9963
image opentv 6.1

weisblau

 

[conga]

Hier eine erste Testkonfiguration der Oscam Dateien "oscam.server" "oscam.user" "oscam.conf" für die weis/blaue Karte. Kopier die mal in das Oscam Verzeichnis und starte mal neu und teil uns mit was passiert.
RSAKEY ist noch leer und muss eingetragen werden.

Spoiler: oscam.server

[reader]
label = tivusat
protocol = internal
device = /dev/sci0
caid = 183D
rsakey =
detect = cd
group = 1
emmcache = 1,3,2

Spoiler: oscam.conf

# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /tmp/oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 1500
preferlocalcards = 1
emmlogdir =
failbantime = 5
bindwait = 5

[cs378x]
port = 44357

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 8088
httpuser = user
httppwd = xxxxxxxxxx
httprefresh = 4
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Spoiler: Oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r788
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = local
#pwd =
au = 1
group = 1

 

[gianniblu01]

nein geht nichts.
sogar keine log datein mehr sichtbar
fehler oscam webiff blocking localhost )127.0.0.1

 

[ultima]

Soll die Karte im internen Kartenleser laufen? Dann kann es mit den Configs aus Beitrag#22 nicht gehen.
Kommst du auf das OscamWebif?

 

[conga]

Die Konfigurationsdateien noch mal angepasst in #22 schau mal bitte was jetzt passiert.

 

[gianniblu01]

Gruß an alle Helfer .

habe den Receiver Golden Media 990 spark mit Opentv 6.1
Möchte tvusat sehen aber das bild wird nicht hell wenn ich den oscam starte.
Habe ich was vergessen .
hier meine log.

conf

Spoiler

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = stdoutLevel
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/oscam/cw
maxlogsize = 1500
Level = 15
CacheDelay = 120


[webif]
httpport = 88
httpuser = usertivusat
httppwd = passwordtivusat
httpallowed = 127.0.0.1,192.168.0.108
httprefresh = 4


[monitor]
port = 988
aulow = 120
monlevel = 4

[newcamd]
key = xxxxxxxxxxxxxxxxxxxxxxxxxxx
port = 34001@183d:005411

[cs357x]
Port = 34001

server.

Spoiler

[reader]
label = Tivusat
protocol = internal
detect = CD
device = /dev/sci0
group = 2
CustomSpeed = 1
mhz = 368
cardmhz = 368
EMMCache = 1,3,2
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Caid = 183D
nagra_read = 1

user.

Spoiler

[account]
user = usertivusat
pwd = passwordtivusat
AU = tivusat

log.

Spoiler

50A630 r Tivusat [internal] card detected
2018/11/19 22:53:19 50A630 r Tivusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2018/11/19 22:53:19 50A630 r Tivusat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/11/19 22:53:19 50A630 r Tivusat [internal] Calculated work ETU is 8.70 us reader mhz = 368
2018/11/19 22:53:21 50A630 r Tivusat [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2018/11/19 22:53:22 50A630 r Tivusat [internal] detect nagra tiger card
2018/11/19 22:53:22 50A630 r Tivusat [internal] type: NAGRA, caid: 183D, IRD ID: ############
2018/11/19 22:53:22 50A630 r Tivusat [internal] ProviderID: 00 00 54 11
2018/11/19 22:53:22 50A630 r Tivusat [internal] ready for requests
2018/11/19 22:53:22 50A630 r Tivusat [internal] found card system nagra
2018/11/19 22:53:22 50A630 r Tivusat [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/11/19 22:53:22 50A630 r Tivusat [nagra] ROM: T I G E R 0 0 3
2018/11/19 22:53:22 50A630 r Tivusat [nagra] REV: R e v 2 5 0
2018/11/19 22:53:22 50A630 r Tivusat [nagra] SER: ############
2018/11/19 22:53:22 50A630 r Tivusat [nagra] CAID: 183D
2018/11/19 22:53:22 50A630 r Tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
2018/11/19 22:53:22 50A630 r Tivusat [nagra] Activation Date : 01/01/2009
2018/11/19 22:53:22 50A630 r Tivusat [nagra] Expiry Date : 01/01/2038

Danke im voraus

 

[ultima]

Spoiler: oscam.conf

[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /etc/tuxbox/config

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Spoiler: oscam.server

[reader]
label = tivusat
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
nagra_read = 1
caid = 183D
ident = 183D:000000,005411
mhz = 368
cardmhz = 368
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
group = 1
emmcache = 1,3,2

Spoiler: oscam.user

[account]
user = local
pwd =
group = 1
uniq = 3
au = 1

 

[Kind regards]

hier kommt, wenn ich drauf schalte folgendes :

Spoiler: 183D

20.11.2018 18:45:54 54560247 c   (dvbapi) Demuxer 0 stop descrambling program number 6FF0 (VH1)
20.11.2018 18:45:55 54560247 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 183D ECM_PID: 1081 PROVID: 000000
20.11.2018 18:45:55 54560247 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 183E ECM_PID: 1149 PROVID: 000000
20.11.2018 18:45:55 54560247 c   (dvbapi) Demuxer 0 found 2 ECMpids and 10 STREAMpids in caPMT
20.11.2018 18:45:55 54560247 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 183D PROVID 000000 ECMPID 1081 ANY CHID PMTPID 044D VPID 01F5
20.11.2018 18:45:55 54560247 c   (dvbapi) Demuxer 0 found 2 ECMpids and 10 STREAMpids in PMT
20.11.2018 18:45:55 34CD5597 p   (camd35) bananapi CMD05 AU request for caid: 183D auprovid: 000000
20.11.2018 18:45:55 54560247 c      (ecm) duo2 (183D@000000/0000/0D49/91:C937B8A53019AE0CA700A5515501AEAF): found (141 ms) by 183D - Rai 1 HD
20.11.2018 18:46:04 54560247 c      (ecm) duo2 (183D@000000/0000/0D49/91:100B633AE72C151DA3725D4D9B22DD71): found (131 ms) by 183D - Rai 1 HD

somit erkennt man im Log --> es läuft
bei dir ready for requests --> kann man jetzt raten, warum es nicht läuft
Karte aktiviert und mit EMM's verorgt ?

 

[gianniblu01]

karte geht auf mein anderen Receiver.
was heist mit EMM.s verorgt ?
brauche ich ein c line ?

 

[conga]

Nein, brauchst keine c line, bei oscam geht es über den User [dvbapi]

Das log sieht doch gut aus, die Karte wird erkannt und hat ein activation und Empire Datum.
ecm Abfragen sind im log nicht zu sehen.

.