gm 990 spark reload

[4gx35]

AW: gm 990 spark reload

bei usern reicht überall name pass group, bei ines dann dazu au = V13

dann geht es wohl auch

 

[markusz]

AW: gm 990 spark reload

also sender werden immer noch ned hell

Spoiler

[account]
user = ines
pwd =
group = 1
monlevel = 4
au = v13
services =
caid = 09C4
ident = 000000
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
keepalive = 1


[account]
user = schlafen
pwd = xx
group = 1


[account]
user = angela
pwd = xx
group = 1

 

[4gx35]

AW: gm 990 spark reload

dvbapi pmtmode entfernen oder 0

ident überall weg, user ines auch alles weg wie bei den anderen bis auf au pwd leer

was steht denn im Webinterface Card ok und dvbapi ok ?

 

[markusz]

AW: gm 990 spark reload

mhh sobald ich oscam starte gehen die sender nimma

logfile

Spoiler

2013/01/23 19:54:11 29893208 s >> OSCam << cardserver started, version 1.10rc-svn, build # (sh4-linux)
2013/01/23 19:54:11 29893208 s version=1.10rc-svn, build #, system=sh4-linux-, nice=-1
2013/01/23 19:54:11 29893208 s client max. idle=120 sec, debug level=0
2013/01/23 19:54:11 29893208 s max. logsize=500 Kb, loghistorysize=4096 bytes
2013/01/23 19:54:11 29893208 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/01/23 19:54:11 29893208 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2013/01/23 19:54:11 29893208 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/01/23 19:54:11 29893208 s signal handling initialized (type=sysv)
2013/01/23 19:54:11 29893208 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2013/01/23 19:54:11 29893208 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2013/01/23 19:54:11 29893208 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/01/23 19:54:11 29893208 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/01/23 19:54:11 29893208 s monitor: disabled
2013/01/23 19:54:11 29893208 s camd33: disabled
2013/01/23 19:54:11 29893208 s camd35: disabled
2013/01/23 19:54:11 29893208 s cs378x: disabled
2013/01/23 19:54:11 29893208 s newcamd: disabled
2013/01/23 19:54:11 29893208 s cccam: initialized (fd=6, port=41251, crypted)
2013/01/23 19:54:11 29893208 s radegast: disabled
2013/01/23 19:54:11 29893208 s http thread started
2013/01/23 19:54:11 29893208 s creating thread for device /dev/sci0
2013/01/23 19:54:11 29893208 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/01/23 19:54:11 29893208 s waiting for local card init
2013/01/23 19:54:11 2B8AD4C8 r reader thread started (thread=2B8AD4C8, label=v13, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/01/23 19:54:11 2B0AD4C8 h HTTP Server listening on port 8888
2013/01/23 19:54:11 2B8AD4C8 r v13 card detected
2013/01/23 19:54:15 2B8AD4C8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/01/23 19:54:18 2B8AD4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/01/23 19:54:50 2B8AD4C8 r [videoguard2-reader] classD0 ins58: failed
2013/01/23 19:54:50 2B8AD4C8 r card system not supported
2013/01/23 19:54:50 2B8AD4C8 r Normal mode failed, reverting to Deprecated Mode
2013/01/23 19:54:51 2B8AD4C8 r ERROR: 0 characters found in ATR
2013/01/23 19:54:51 2B8AD4C8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/01/23 19:54:52 2B8AD4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/01/23 19:54:53 2B8AD4C8 r ERROR in IO_Serial_Write u=-1 to_send=5 (errno=1 Operation not permitted)
2013/01/23 19:54:55 2B8AD4C8 r ERROR in IO_Serial_Write u=-1 to_send=5 (errno=1 Operation not permitted)
2013/01/23 19:54:56 2B8AD4C8 r card system not supported
2013/01/23 19:54:56 2B8AD4C8 r card initializing error
2013/01/23 19:54:57 29893208 s init for all local cards done
2013/01/23 19:54:57 29893208 s anti cascading disabled
2013/01/23 19:54:57 2C0AD4C8 c plain dvbapi-client granted (ines, au=on (1 reader))
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: can't open priority file /var/tuxbox/config/oscam.dvbapi
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2013/01/23 19:54:57 2C0AD4C8 c dvbapi: new program number: EF10 (1830:EF10 unknown)
2013/01/23 19:54:57 2C0AD4C8 c ines (1830&000000/EF10/92:B4C4): rejected group (1 ms) (of 0 avail 0) - 1830:EF10 unknown (no matching reader)
2013/01/23 19:54:58 2C0AD4C8 c ines (1843&000000/EF10/89:BC8F): rejected group (1 ms) (of 0 avail 0) - 1843:EF10 unknown (no matching reader)
2013/01/23 19:54:58 2C0AD4C8 c ines (09C4&000000/EF10/B3:E1D3): rejected group (1 ms) (of 0 avail 0) - 09C4:EF10 unknown (no matching reader)
2013/01/23 19:54:58 2C0AD4C8 c ines (098C&000000/EF10/98E30): rejected group (0 ms) (of 0 avail 0) - 098C:EF10 unknown (no matching reader)
2013/01/23 19:54:58 2C0AD4C8 c dvbapi: try pids again #1
2013/01/23 19:54:58 2C0AD4C8 c ines (1860&000000/EF10/8F:F236): rejected group (0 ms) (of 0 avail 0) - 1860:EF10 unknown (no matching reader)
2013/01/23 19:54:58 2C0AD4C8 c ines (1830&000000/EF10/92:B4C4): rejected group (1 ms) (of 0 avail 0) - 1830:EF10 unknown (no matching reader)
2013/01/23 19:54:59 2C0AD4C8 c ines (1843&000000/EF10/89:BC8F): rejected group (1 ms) (of 0 avail 0) - 1843:EF10 unknown (no matching reader)
2013/01/23 19:54:59 2C0AD4C8 c ines (09C4&000000/EF10/B3:7D13): rejected group (0 ms) (of 0 avail 0) - 09C4:EF10 unknown (no matching reader)
2013/01/23 19:54:59 2C0AD4C8 c ines (098C&000000/EF10/98:50AC): rejected group (0 ms) (of 0 avail 0) - 098C:EF10 unknown (no matching reader)
2013/01/23 19:54:59 2C0AD4C8 c dvbapi: try pids again #2
2013/01/23 19:54:59 2C0AD4C8 c ines (1860&000000/EF10/8F:58AD): rejected group (0 ms) (of 0 avail 0) - 1860:EF10 unknown (no matching reader)
2013/01/23 19:54:59 2C0AD4C8 c ines (1830&000000/EF10/92E86): rejected group (0 ms) (of 0 avail 0) - 1830:EF10 unknown (no matching reader)
2013/01/23 19:55:00 2C0AD4C8 c ines (1843&000000/EF10/89:7B1A): rejected group (0 ms) (of 0 avail 0) - 1843:EF10 unknown (no matching reader)
2013/01/23 19:55:00 2C0AD4C8 c ines (09C4&000000/EF10/B3:7D13): rejected group (1 ms) (of 0 avail 0) - 09C4:EF10 unknown (no matching reader)
2013/01/23 19:55:00 2C0AD4C8 c ines (098C&000000/EF10/98:50AC): rejected group (0 ms) (of 0 avail 0) - 098C:EF10 unknown (no matching reader)
2013/01/23 19:55:00 2C0AD4C8 c dvbapi: try pids again #3
2013/01/23 19:55:00 2C0AD4C8 c dvbapi: can't decode channel
2013/01/23 19:55:00 2C0AD4C8 c ines (1860&000000/EF10/8F:58AD): rejected group (0 ms) (of 0 avail 0) - 1860:EF10 unknown (no matching reader)

oscam.users(hoff du hast es so gemeint)

Spoiler

[account]
user = ines
pwd =
group = 1
monlevel = 4
au = v13




[account]
user = schlafen
pwd = xx
group = 1




[account]
user = angela
pwd = xx
group = 1

oscam.server(ident entfernt)

Spoiler

[reader]
label = V13
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,2,3
lb_weight = 100
ins7e11 = 15
ndsversion = 2

 

[4gx35]

AW: gm 990 spark reload

kann ja auch nicht gehn, deine Karte wird nicht gelesen, steht doch sicher auch im Status Webif

alte 1.10 version !! unbedingt eine Version 1.20 ab 7884 suchen, sollte es doch irgendwo geben
sonst musst du ins7e11 = 15 aus reader entfernen,


kann hilfreich sein, sich mal einzulesen in Link ist nicht mehr aktiv.

 

[markusz]

AW: gm 990 spark reload

des war die aktuellste die ich im downloadbereich unter golden media gefunden hab
ne andere find ich ned oder kann man da auch andere plugins verwenden??

 

[4gx35]

AW: gm 990 spark reload

kenn mich mit GM überhaupt nicht aus,
wer dir den empfohlen hat, weiss eventuell mehr

 

[Alex]

AW: gm 990 spark reload

Ja GM 990 ist baugleich mit dem Edision Argus Pingulux (Plus). Hab da einige kompiliert schau mal hier:
Link ist nicht mehr aktiv.

 

[markusz]

AW: gm 990 spark reload

und wie installier ich die unstable bekomm kein neues plugin

 

[Alex]

AW: gm 990 spark reload

Einfach per FTP mit der Box verbinden: Per FTP Programm mit dem Pingulux verbinden
Hier steht wo die Datei hin muss bei Spark: Übersicht , bei welchem Image Oscam wohin kommt
Danach noch Rechtsklick auf die Datei.
Dateiberechtigung auf 755 ändern und gut ist es.

Oscam starten und freuen :emoticon-0157-sun:

 

[markusz]

AW: gm 990 spark reload

so ich hab jetz den gm mal komplet gelöscht und NUR dieses plugin installiert: Link ist nicht mehr aktiv.
so ich komm zwar aufs webif aber es wird nicht hell!

log:

Spoiler

2013/01/26 17:25:43 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.cacheex" (errno=2 No such file or directory)
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s monitor: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s camd35: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s cs378x: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s newcamd: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s cccam: initialized (fd=4, port=41251, crypted)
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s pandora: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s csp: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s radegast: disabled
2013/01/26 17:25:43 0 s starting thread http
2013/01/26 17:25:43 0 s http thread started
2013/01/26 17:25:43 0 s starting thread reader check
2013/01/26 17:25:43 0 s reader check thread started
2013/01/26 17:25:43 0 s starting thread check
2013/01/26 17:25:43 0 s check thread started
2013/01/26 17:25:43 0 s v13 [internal] creating thread for device /dev/sci0
2013/01/26 17:25:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/01/26 17:25:43 0 s waiting for local card init
2013/01/26 17:25:43 5823E8 r v13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/01/26 17:25:43 58E360 h HTTP Server listening on port 88
2013/01/26 17:25:43 5823E8 r v13 [internal] card detected
2013/01/26 17:25:44 5823E8 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/01/26 17:25:44 5823E8 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/01/26 17:25:44 5823E8 r v13 [internal] Setting baudrate to 9600 bps
2013/01/26 17:25:44 5823E8 r v13 [internal] Calculated work ETU is 74.40 us
2013/01/26 17:25:47 5823E8 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/01/26 17:25:48 5823E8 r v13 [internal] Card type: P1TV
2013/01/26 17:25:48 5823E8 r v13 [internal] Rom version: 10A7
2013/01/26 17:25:49 5823E8 r v13 [internal] classD0 ins58: failed
2013/01/26 17:25:49 5823E8 r v13 [internal] card system not supported
2013/01/26 17:25:49 5823E8 r v13 [internal] Normal mode failed, reverting to Deprecated Mode
2013/01/26 17:25:49 5823E8 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/01/26 17:25:49 5823E8 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/01/26 17:25:49 5823E8 r v13 [internal] Calculated work ETU is 74.40 us
2013/01/26 17:25:52 5823E8 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/01/26 17:25:57 5823E8 r v13 [internal] classD0 ins7401: failed - cmd list not read
2013/01/26 17:25:57 5823E8 r v13 [internal] card system not supported
2013/01/26 17:25:57 5823E8 r v13 [internal] card initializing error
2013/01/26 17:25:57 0 s init for all local cards done
2013/01/26 17:25:57 0 s anti cascading disabled
2013/01/26 17:25:57 591920 c plain dvbapi-client granted (int, au=auto (1 reader))
2013/01/26 17:25:57 591920 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2013/01/26 17:26:57 58E360 h Refresh Server requested by WebIF from 192.168.178.36

web if status:


- - - Aktualisiert - - -

so ich hab jetz den gm mal komplet gelöscht und NUR dieses plugin installiert: Link ist nicht mehr aktiv.
so ich komm zwar aufs webif aber es wird nicht hell!

log:

Spoiler

2013/01/26 17:25:43 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.cacheex" (errno=2 No such file or directory)
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s monitor: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s camd35: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s cs378x: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s newcamd: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s cccam: initialized (fd=4, port=41251, crypted)
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s pandora: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s csp: disabled
2013/01/26 17:25:43 0 s Starting listener 0
2013/01/26 17:25:43 0 s radegast: disabled
2013/01/26 17:25:43 0 s starting thread http
2013/01/26 17:25:43 0 s http thread started
2013/01/26 17:25:43 0 s starting thread reader check
2013/01/26 17:25:43 0 s reader check thread started
2013/01/26 17:25:43 0 s starting thread check
2013/01/26 17:25:43 0 s check thread started
2013/01/26 17:25:43 0 s v13 [internal] creating thread for device /dev/sci0
2013/01/26 17:25:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/01/26 17:25:43 0 s waiting for local card init
2013/01/26 17:25:43 5823E8 r v13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/01/26 17:25:43 58E360 h HTTP Server listening on port 88
2013/01/26 17:25:43 5823E8 r v13 [internal] card detected
2013/01/26 17:25:44 5823E8 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/01/26 17:25:44 5823E8 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/01/26 17:25:44 5823E8 r v13 [internal] Setting baudrate to 9600 bps
2013/01/26 17:25:44 5823E8 r v13 [internal] Calculated work ETU is 74.40 us
2013/01/26 17:25:47 5823E8 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/01/26 17:25:48 5823E8 r v13 [internal] Card type: P1TV
2013/01/26 17:25:48 5823E8 r v13 [internal] Rom version: 10A7
2013/01/26 17:25:49 5823E8 r v13 [internal] classD0 ins58: failed
2013/01/26 17:25:49 5823E8 r v13 [internal] card system not supported
2013/01/26 17:25:49 5823E8 r v13 [internal] Normal mode failed, reverting to Deprecated Mode
2013/01/26 17:25:49 5823E8 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/01/26 17:25:49 5823E8 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/01/26 17:25:49 5823E8 r v13 [internal] Calculated work ETU is 74.40 us
2013/01/26 17:25:52 5823E8 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/01/26 17:25:57 5823E8 r v13 [internal] classD0 ins7401: failed - cmd list not read
2013/01/26 17:25:57 5823E8 r v13 [internal] card system not supported
2013/01/26 17:25:57 5823E8 r v13 [internal] card initializing error
2013/01/26 17:25:57 0 s init for all local cards done
2013/01/26 17:25:57 0 s anti cascading disabled
2013/01/26 17:25:57 591920 c plain dvbapi-client granted (int, au=auto (1 reader))
2013/01/26 17:25:57 591920 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2013/01/26 17:26:57 58E360 h Refresh Server requested by WebIF from 192.168.178.36

web if status:


und die configs:

Spoiler

oscam.conf
[global]
logfile = /root/plugin/var/log/oscam/oscam.log
fallbacktimeout = 2500
clientmaxidle = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 500
lb_savepath = /tmp/.oscam/stat
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_use_locking = 1


[monitor]
httpcss = /var/config//hexer ddcstyle.css
monlevel = 4
appendchaninfo = 1


[dvbapi]
enabled = 1
au = 1
boxtype = none
user = int
pmt_mode = 0
request_mode = 0


[webif]
httpport = 88
httphelplang = de
#httprefresh = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpsavefullcfg = 1


[cccam]
port = 41251
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
nodeid = 364A0E8E104613A6
reshare_mode = 0

oscam.user

Spoiler

#INTERNER ACCOUNT#
[account]
user = int
pwd =
group = 1
monlevel = 4
au = 1
services = skyall,hdplus
caid = 09C4
ident = 000000
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
keepalive = 1


#CLIENTS#
[account]
user = schlafen
pwd = x
group = 1
monlevel = 4
au = 1
services = skyall,hdplus
caid = 09C4
ident = 000000
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
keepalive = 1

oscam.server

Spoiler

[reader]
label = V13
enable = 1
protocol = internal
device = /dev/sci0
services = skyall
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ident = 09C4:000000
group = 1
emmcache = 1,2,3
lb_weight = 100
ins7e11 = 15
ndsversion = 2

oscam.dvbapi

Spoiler

######### oscam.dvbapi ##############
#
######### P = Priority ## I = Ignores ##########
#
# Sky Germany S02 Card
P: 09C4:000000
I: 1833
I: 1702
I: 1722

 

[Alex]

AW: gm 990 spark reload

Wie sieht deine oscam-server aus?

Edit: War zu schnell, da die Cfg mittlerweile da is.

Oscam.server mal so abändern:

Spoiler

[reader]
label = V13
enable = 1
protocol = internal
device = /dev/sci0
services = skyall
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
[COLOR=#ff0000]ident = 09C4:000000[/COLOR]
group = 1
emmcache = 1,[B][COLOR=#008000]1,2[/COLOR][/B]
[COLOR=#ff0000]lb_weight = 100 
ins7e11 = 15 [/COLOR]
ndsversion = 2

Das in Rot entfernen und das in Grün abbändern.
Danach Oscam neustarten und das Log posten

 

[markusz]

AW: gm 990 spark reload

steht schon da hab nur den vorschau und antwort button vertauscht und zu früh abgeschickt!^^

 

[Alex]

AW: gm 990 spark reload

Hab nen Edit gemacht

 

[markusz]

AW: gm 990 spark reload

ok log sieht so aus

Spoiler

2013/01/26 17:47:17 0 s starting thread log_list_thread
2013/01/26 17:47:17 0 s log_list_thread thread started
2013/01/26 17:47:17 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #8132 (sh4-linux)
2013/01/26 17:47:17 0 s version=1.20-unstable_svn, build #8132, system=sh4-linux, nice=-1
2013/01/26 17:47:17 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2013/01/26 17:47:17 0 s max. logsize=500 Kb, loghistorysize=4096 bytes
2013/01/26 17:47:17 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/01/26 17:47:17 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/01/26 17:47:17 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/01/26 17:47:17 0 s signal handling initialized (type=sysv)
2013/01/26 17:47:17 0 s 210 service-id's loaded in 5ms
2013/01/26 17:47:17 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.tiers" (errno=2 No such file or directory)
2013/01/26 17:47:17 0 s 1 provid's loaded
2013/01/26 17:47:17 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.guess" (errno=2 No such file or directory)
2013/01/26 17:47:17 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory)
2013/01/26 17:47:17 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.whitelist" (errno=2 No such file or directory)
2013/01/26 17:47:17 0 s ERROR: Cannot open file "/root/plugin/var/tuxbox/config/oscam.cacheex" (errno=2 No such file or directory)
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s monitor: disabled
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s camd35: disabled
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s cs378x: disabled
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s newcamd: disabled
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s cccam: initialized (fd=4, port=41251, crypted)
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s pandora: disabled
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s csp: disabled
2013/01/26 17:47:17 0 s Starting listener 0
2013/01/26 17:47:17 0 s radegast: disabled
2013/01/26 17:47:17 0 s starting thread http
2013/01/26 17:47:17 0 s http thread started
2013/01/26 17:47:17 0 s starting thread reader check
2013/01/26 17:47:17 0 s reader check thread started
2013/01/26 17:47:17 0 s starting thread check
2013/01/26 17:47:17 0 s check thread started
2013/01/26 17:47:17 0 s v13 [internal] creating thread for device /dev/sci0
2013/01/26 17:47:17 0 s waiting for local card init
2013/01/26 17:47:17 5818E0 r v13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/01/26 17:47:17 29800468 h HTTP Server listening on port 88
2013/01/26 17:47:18 5818E0 r v13 [internal] card detected
2013/01/26 17:47:24 5818E0 r v13 [internal] Error activating card.