Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Futro und HD01 Karte bleibt dunkel

    Nobody is reading this thread right now.
J

jocras

Hacker
Registriert
25. Juli 2009
Beiträge
311
Reaktionspunkte
41
Punkte
88
Hallo,
habe an meinen Futro S100 nun eine HD01+ (weisse Karte) angeschlossen an einer Easymouse. Leider wird es nicht hell.
Es kommt die Meldung: ERROR
(no entitlements)
Hier meine Datei Oscam.Server:
[reader]
label = HD01
description = HD01
enable = 1
protocol = mouse
device = /dev/HD01
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 0
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid = 1830
atr =
boxid =
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
deskey =
ins7e =
ins7e11 =
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 3
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 1
Die Easymouse ist eingestellt:
5V, Phoenix, 3,58 Mhz
Habt ihr vielleicht einen Tipp was ich falsch mache?
Vielen Dank.
 
Zuletzt bearbeitet von einem Moderator:
AW: Futro und HD01 Karte bleibt dunkel

Zuerst einmal kannst du deine Config deutlich übersichtlicher machen, in dem du in der oscam.conf httpsavefullcfg = 0 einstelltst.
Desweiteren wäre ein Log vom OScam Start hilfreich, um den Fehler zu "sehen".
Löschen würd ich jedenfalls die beiden:
mhz = 368
cardmhz = 368

Diese Frequenz kann der Reader gar nicht

P.S.: hab dich mal verschoben, weil Oscam Problem und nichts Hardwarespezifisches.
al-x83
 
AW: Futro und HD01 Karte bleibt dunkel

Ändere mal auf
mhz = 600

Easymouse einstellen auf 5V / Phöenix / Pfeil / 6,00
OScam neu starten und wenn es nicht geht oscam.log vom Einlesen der Karte hier posten (im Spoiler).

-supraracer
 
AW: Futro und HD01 Karte bleibt dunkel

Hi,
habe alles ausprobiert - leider ohne Erfolg.
Der Reader ist als HD01 angemeldet.
Hier mein Logfile:
· [FONT=&quot]2016/01/16 19:40:02 6914CFDC r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75122[/FONT]
· [FONT=&quot]2016/01/16 19:40:03 6914CFDC r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75150[/FONT]
· [FONT=&quot]2016/01/16 19:40:05 6914CFDC r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&quot]2016/01/16 19:40:05 6914CFDC r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
· [FONT=&quot]2016/01/16 19:40:05 6914CFDC r (reader) HD01 [mouse] card initializing error

Vielen Dank.
[/FONT]
 
AW: Futro und HD01 Karte bleibt dunkel

Hi,
habe den Reader jetzt wieder auf 6 Mhz.
Hier meine Log-Daten (ohne meine anderen 2 Karten):
· [FONT=&amp]2016/01/16 19:54:12 5F924487 h (reader) HD01 [mouse] Restarting reader[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 5F924487 h (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75128[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75140[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 3E140954 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=600, cardmhz=600)[/FONT]
· [FONT=&amp]2016/01/16 19:54:13 3E140954 r (reader) HD01 [mouse] card detected[/FONT]
· [FONT=&amp]2016/01/16 19:54:13 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75122[/FONT]
· [FONT=&amp]2016/01/16 19:54:14 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
· [FONT=&amp]2016/01/16 19:54:15 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
· [FONT=&amp]2016/01/16 19:54:17 3E140954 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:54:17 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75129[/FONT]
· [FONT=&amp]2016/01/16 19:54:18 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75111[/FONT]
· [FONT=&amp]2016/01/16 19:54:20 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
· [FONT=&amp]2016/01/16 19:54:21 3E140954 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:54:21 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75121[/FONT]
· [FONT=&amp]2016/01/16 19:54:22 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120[/FONT]
· [FONT=&amp]2016/01/16 19:54:24 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75115[/FONT]
· [FONT=&amp]2016/01/16 19:54:25 3E140954 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:54:25 3E140954 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
· [FONT=&amp]2016/01/16 19:54:25 3E140954 r (reader) HD01 [mouse] card initializing error[/FONT]
· [FONT=&amp]2016/01/16 19:55:51 5F924487 h (reader) HD01 [mouse] Restarting reader[/FONT]
· [FONT=&amp]2016/01/16 19:55:51 5F924487 h (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
· [FONT=&amp]2016/01/16 19:55:51 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75124[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75157[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=600, cardmhz=600)[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] card detected[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75121[/FONT]
· [FONT=&amp]2016/01/16 19:55:53 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
· [FONT=&amp]2016/01/16 19:55:54 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75147[/FONT]
· [FONT=&amp]2016/01/16 19:55:56 0AA17899 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:55:56 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75140[/FONT]
· [FONT=&amp]2016/01/16 19:55:57 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75113[/FONT]
· [FONT=&amp]2016/01/16 19:55:59 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75117[/FONT]
· [FONT=&amp]2016/01/16 19:56:00 0AA17899 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:56:00 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
· [FONT=&amp]2016/01/16 19:56:01 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75155[/FONT]
· [FONT=&amp]2016/01/16 19:56:03 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120[/FONT]
· [FONT=&amp]2016/01/16 19:56:04 0AA17899 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:56:04 0AA17899 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
· [FONT=&amp]2016/01/16 19:56:04 0AA17899 r (reader) HD01 [mouse] card initializing error[/FONT]
· [FONT=&amp]2016/01/16 19:56:51 68A74AC9 c (ecm) pingu (1830@000000/0000/EF75/92:6140B78E0063A73D7101E0801865BDB8): rejected group (0 ms) (no matching reader)[/FONT]
Vielleicht könnt ihr da was rauslesen.
LG
 
Zuletzt bearbeitet von einem Moderator:
AW: Futro und HD01 Karte bleibt dunkel

cardmhz auf 357 einstellen, neu starten
log posten, im SPOILER bitte
 
AW: Futro und HD01 Karte bleibt dunkel

mhz sollte 600 sein, aber cardmhz 357
 
AW: Futro und HD01 Karte bleibt dunkel

Hi,
der Reader ist auf 6 Mhz eingestellt - im Web-IPC auf 357 Mhz.
Hier mein Logfile:
·[FONT=&amp] 2016/01/16 20:17:33 5F924487 h (reader) HD01 [mouse] Restarting reader[/FONT]
·[FONT=&amp] 2016/01/16 20:17:33 5F924487 h (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75155[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=357, cardmhz=357)[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] card detected[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75137[/FONT]
·[FONT=&amp] 2016/01/16 20:17:36 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75117[/FONT]
·[FONT=&amp] 2016/01/16 20:17:37 5F924487 h (webif) Reader HD01 restarted by WebIF from 192.168.1.33[/FONT]
·[FONT=&amp] 2016/01/16 20:17:37 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
·[FONT=&amp] 2016/01/16 20:17:38 2F14A8A3 r (reader) HD01 [mouse] Error activating card.[/FONT]
·[FONT=&amp] 2016/01/16 20:17:39 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120[/FONT]
·[FONT=&amp] 2016/01/16 20:17:40 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75117[/FONT]
·[FONT=&amp] 2016/01/16 20:17:41 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75124[/FONT]
·[FONT=&amp] 2016/01/16 20:17:42 2F14A8A3 r (reader) HD01 [mouse] Error activating card.[/FONT]
·[FONT=&amp] 2016/01/16 20:17:43 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75142[/FONT]
·[FONT=&amp] 2016/01/16 20:17:44 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75114[/FONT]
·[FONT=&amp] 2016/01/16 20:17:45 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75116[/FONT]
·[FONT=&amp] 2016/01/16 20:17:46 2F14A8A3 r (reader) HD01 [mouse] Error activating card.[/FONT]
·[FONT=&amp] 2016/01/16 20:17:47 2F14A8A3 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
·[FONT=&amp] 2016/01/16 20:17:47 2F14A8A3 r (reader) HD01 [mouse] card initializing error
LG
[/FONT]
 
Zuletzt bearbeitet von einem Moderator:
AW: Futro und HD01 Karte bleibt dunkel

Du musst im Reader unter mhz 600 einstellen, cardmhz auf 357.
Easymouse auf 6 MHz lassen.

Oder diesen hier über Files kopieren.

Code: 
[reader]
label                         = HD+
description                   = Astra HD+
protocol                      = mouse
device                        = /dev/HD01
caid                          = 1830
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist                  = 1830:92
ecmheaderwhitelist            = 80308F078D,81308F078D
detect                        = cd
mhz                           = 600
group                         = 1
emmcache                      = 1,3,2,0
blockemm-unknown              = 1
 
AW: Futro und HD01 Karte bleibt dunkel

Hi,
die Files habe ich kopiert in die oscam.server. Der Reader steht auf 6 Mhz.
Geht leider noch nicht.
Hier meine log-daten:
  • [FONT=&amp]2016/01/16 22:30:46 0552DBF0 r (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
  • [FONT=&amp]2016/01/16 22:30:46 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75126[/FONT]
  • [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75116[/FONT]
  • [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=357, cardmhz=357)[/FONT]
  • [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] card detected[/FONT]
  • [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75126[/FONT]
  • [FONT=&amp]2016/01/16 22:30:49 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
  • [FONT=&amp]2016/01/16 22:30:50 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75118[/FONT]
  • [FONT=&amp]2016/01/16 22:30:51 4A0DE77F r (reader) HD01 [mouse] Error activating card.[/FONT]
  • [FONT=&amp]2016/01/16 22:30:52 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75124[/FONT]
  • [FONT=&amp]2016/01/16 22:30:53 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
  • [FONT=&amp]2016/01/16 22:30:54 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75132[/FONT]
  • [FONT=&amp]2016/01/16 22:30:55 4A0DE77F r (reader) HD01 [mouse] Error activating card.[/FONT]
  • [FONT=&amp]2016/01/16 22:30:56 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75125[/FONT]
  • [FONT=&amp]2016/01/16 22:30:57 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75121[/FONT]
  • [FONT=&amp]2016/01/16 22:30:58 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75118[/FONT]
  • [FONT=&amp]2016/01/16 22:30:59 4A0DE77F r (reader) HD01 [mouse] Error activating card.[/FONT]
  • [FONT=&amp]2016/01/16 22:31:00 4A0DE77F r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
  • [FONT=&amp]2016/01/16 22:31:00 4A0DE77F r (reader) HD01 [mouse] card initializing error
  • [/FONT]
LG
 
Zuletzt bearbeitet von einem Moderator:
AW: Futro und HD01 Karte bleibt dunkel

Steckt die Karte wirklich richtig herum im Reader?

-supraracer
 
AW: Futro und HD01 Karte bleibt dunkel

Hi,
ja - Chip unten vorne im Reader.
LG
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

A
gelöst HD01 mit Easymouse wird nicht hell
2
Antworten
22
Aufrufe
2K
sodex
L
gelöst OScam mit HD05 komisches Verhalten / Bild dunkel
2
Antworten
25
Aufrufe
1K
d2z
B
gelöst ORF Karte Fehlermeldung
2
Antworten
18
Aufrufe
2K
buzzard
B
J
  • Frage Frage
gelöst HD01 Karte geht nicht
2
Antworten
15
Aufrufe
2K
tom00tom
M
Dreambox Two als Oscam Server, HD01 Karte, Aussetzer/Hänger bei Clients
2
Antworten
26
Aufrufe
3K
m0bbed
M
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…