SCR3310 PCSC Fritzbox 7170 W900V
@ BigFat
did you´ve made ur scr3310 working with this or the last version by märklin from the database?
Yes the pcsc reader is now recognized and PCSC is working
But not Oscam, who can not open the port
Here is how i made it with Linux pc (or vmware linux on windows)
Downloaded freetz-1.1.x
Renamed the firmware to my_firm.image and putted it on freetz_1.1.x folder
Opened a terminal and unpacked the firmware with freetz 1.1.x with these commands
cd to the freetz-1.1.x folder
./fwmod -u my_firm.image
Dont close the terminal
Now you have a new folder in freetz-1.1.x named my_firm.image.mod
Opened it and go to original/filesystem/usr/lib/cgi-bin/toolbox
opened stickknow.cgi and searched for a line with my reader, for me it was
SCM_MICRO=$(cat /tmp/.freetzuser/test|grep -i '
SCR3310'|sed -n '1,1p'|awk '{print$2}'|cut -d "=" -f2)
copied this line on a text file anywhere on the pc
opened pcscd.cgi and replaced all the
CARDMAN by
SCM_MICRO
OMNIKEY by
SCR3310
ominikey.gif by scmmicro.gif
saved the new file
Now with the terminal repacked the firmware with the command
./fwmod -p my_firm.image
If the result is ok now you have new files in my_firmware.mod
one named modiied and another one who is the firmware
to send to your Fritzbox
After successfully flash you have to made another modification because a link is not good
Telnet to fritzbox
cd /tmp/flash
rm pcscd.cfg
ln -s /var/media/ftp/uStor01/tools/pcscd/pcscd.cfg pcscd.cfg
and nox PCSCD is working very good
On a telnet session when the card is removed you have a message
On a telnet session when the card is inserted you have a message and PCSC display the ATR
Hope that help