Fastmode bei V14 und Argolis Reader

[lovedirk]

Das kann ich nicht sagen weiß nur Smargo Fastmode Probleme !

 

[Polarlander]

Hab selbst Smargos (Argolis und Maxdigital) aber der ersten Generation für HDplus HD01/02, MTV und alle XXL Karten am laufen, dafür sind sie ohne weiteres geeignet. Für v13 und v14 sind sie aber eine ganz schlechte Kombi.

 

[marc1974]

Hier gehts wirklich nur um HD01. Hast du die am Qnap?


Gesendet von iPhone mit Tapatalk

 

[Polarlander]

Igel mit debian und oscam OSCam: 1.20-unstable_svn Build: r11272 Compiler: i486-linux-gnu
Hier mal mein Reader für die HD01 für den Smargo der ersten Generation

Spoiler: oscam.server

[reader]
label = HDplus
description = HD01
protocol = smartreader
device = Serial:Reader 1234567
enable = 1
audisabled = 0
services = hdplus
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist = 1830:92
ecmheaderwhitelist = 1830:80308F078D,81308F078D
detect = cd
mhz = 534
cardmhz = 368
autospeed = 0
ident = 1830:000000,003411,008011
group = 4
emmcache = 1,1,2

 

[supraracer]

Ich kann als Protokoll auch keinen smartreader

Hat deine Binary überhaupt smartreader (libusb) support?
oscam.version: cardreader_smartreader: yes

-supraracer

 

[marc1974]

Da muss ich gleich mal gucken wenn ich zuhause bin. Meinste es ist die falsche oscam?


Gesendet von iPhone mit Tapatalk

 

[supraracer]

Was heißt falsch, wenn kein libusb mitkompiliert wurde läuft auch das smartreader Protokoll nicht.

-supraracer

 

[marc1974]

Hmmm ich hatte, weil es auf qnap ja kein optware mehr gibt mit entware compiliert. Leider kenne ich mich damit nicht so genau aus. Wie kann ich das überprüfen? Habe auch eine oscam aus dem Netz einfach dann über apps installiert.
Das Tutorial welches hier oben angepinnt ist, bezieht sich leider noch auf optware und ist somit nicht mehr nutzbar. Klasse wäre ja mal von irgendwo eine Beschreibung mit entware. Ich hab ein qnap 253a x86_64 ubuntu. Welche oscam wäre da passend?

 

[supraracer]

Wenn das Standard x64 Hardware ist kannst du die nehmen https://www.digital-eliteboard.com/resources/oscam-svn11273-x86_64-webif-libusb.1967/
PS: Und hör auf damit in zwei Threads zu dem selben Problem zu posten.

-supraracer

 

[marc1974]

Ich compiliere mit der dann heute Abend nochmal neu und melde mich dann. Sorry für doppelpost.


Gesendet von iPhone mit Tapatalk

da haben wir es doch:
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

Ich habe Oscam_1.20.11272_x86 installiert. Das ist dann wohl die falsche. ich spiele die andere eben ein!

Update: Deine OScam aus dem Link läßt sich leider nicht auf dem Qnap installieren. Warum weiss ich nicht. Wohl falsche Endung. Suchte ein qpkg file welches sich dann selbst installiert.
Jetzt bin ich mal wieder nach dem Tutorial vorgegangen, hab alles eingerichtet. Sogar Autostart.sh....mir fehlt trotzdem noch die Oscam im bin Verzeichnis. packe ich die Datei aus deinem Link rein funktioniert es nicht -.-.....ist bestimmt was kleines....aber ich hab mich halt mit der Materie qnap noch nie auseinander gesetzt.

Update 2:
Ich habe nun nochmal das alte qpkg file über apps installiert. Und hab mir dann die passende Version im Netz besorgt. Nach rumprobieren weiss ich, dass ich eine oscam für i686 benötige.
Habe alles zu gelassen und einfach nur die Oscam ersetzt:
Datei heisst: oscam-svn11286-i686-webif-libusb-pcsc-Distribution.tar.gz

Jetzt wird mir in Oscam.version folgendes angezeigt:

Spoiler

Unix starttime: 1481492539
Starttime: 11.12.2016 22:42:19
Version: oscam-1.20-unstable_svn-r11253
Compiler: i586-linux-gnu-libusb
Box type: generic (generic)
PID: 11065
TempDir: /tmp/.oscam
ConfigDir: /share/CACHEDEV1_DATA/.qpkg/OsCAM/etc/
WebifPort: 8589

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: no
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

Leider funktioniert der smargo immer noch nicht. Weder wenn ich ihn mit der Serial anspreche, noch direkt mit Bus und device:

Spoiler

• 2016/12/11 22:54:57 1780AE53 h (reader) Reader-2 [smartreader] Restarting reader
• 2016/12/11 22:54:57 1780AE53 h (reader) Reader-2 [smartreader] creating thread for device 001:002
• 2016/12/11 22:54:57 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:54:57 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:54:57 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:54:59 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:54:59 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:54:59 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:01 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:01 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:01 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:03 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:03 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:03 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:05 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:05 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:05 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:07 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:07 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:07 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:09 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:09 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:09 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:11 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:11 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:11 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:13 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:13 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:13 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:15 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:15 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:15 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002
• 2016/12/11 22:55:17 4CF82585 r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:55:17 4CF82585 r (reader) Reader-2 [smartreader] Smartreader device 001:002 not found
• 2016/12/11 22:55:17 4CF82585 r (reader) Reader-2 [smartreader] Cannot open device: 001:002

Hier nochmal mit Serial

Spoiler

• 2016/12/11 22:57:36 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:36 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:36 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:36 06D5EA72 h (webif) webif: decompressed 174234 bytes back into 419040 bytes
• 2016/12/11 22:57:36 06D5EA72 h (webif) HTTP Server running. ip=192.168.0.7 port=8589
• 2016/12/11 22:57:38 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:38 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:38 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:40 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:40 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:40 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:42 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:42 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:42 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:44 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:44 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:44 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:46 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:46 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:46 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:48 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:48 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:48 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:50 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:50 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:50 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:52 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:52 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:52 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:54 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:54 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:54 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:56 79340BCE r (reader) Reader-2 [smartreader] Endpoint check failed, assuming this is not a smartreader
• 2016/12/11 22:57:56 79340BCE r (reader) Reader-2 [smartreader] Smartreader device Serial:SmartV2 not found
• 2016/12/11 22:57:56 79340BCE r (reader) Reader-2 [smartreader] Cannot open device: Serial:SmartV2
• 2016/12/11 22:57:56 00000000 s (main) init for all local cards done

Hier dann nochmal im Mouse Modus

Spoiler

• 2016/12/11 23:01:10 06D5EA72 h (reader) hdpplus_hd01 [mouse] Restarting reader
• 2016/12/11 23:01:10 06D5EA72 h (reader) hdpplus_hd01 [mouse] creating thread for device /dev/ttyUSB0
• 2016/12/11 23:01:10 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75115
• 2016/12/11 23:01:11 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75109
• 2016/12/11 23:01:11 5C12045E r (reader) hdpplus_hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
• 2016/12/11 23:01:11 5C12045E r (reader) hdpplus_hd01 [mouse] card detected
• 2016/12/11 23:01:11 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75104
• 2016/12/11 23:01:12 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75106
• 2016/12/11 23:01:14 5C12045E r (reader) hdpplus_hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE
  
• 2016/12/11 23:01:14 5C12045E r (reader) hdpplus_hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/12/11 23:01:14 5C12045E r (reader) hdpplus_hd01 [mouse] Setting baudrate to 115312 bps
• 2016/12/11 23:01:14 5C12045E r (reader) hdpplus_hd01 [mouse] Calculated work ETU is 8.67 us reader mhz = 369
• 2016/12/11 23:01:14 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75110
• 2016/12/11 23:01:14 5C12045E r (reader) hdpplus_hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2016/12/11 23:01:26 5C12045E r (reader) hdpplus_hd01 [mouse] Warning: Card returned error on setting ifsd value to 28
• 2016/12/11 23:01:27 5C12045E r (reader) hdpplus_hd01 [mouse] card system not supported
• 2016/12/11 23:01:27 5C12045E r (reader) hdpplus_hd01 [mouse] Normal mode failed, reverting to Deprecated Mode
• 2016/12/11 23:01:27 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75105
• 2016/12/11 23:01:29 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75104
• 2016/12/11 23:01:30 5C12045E r (reader) hdpplus_hd01 [mouse] ATR: XF FF 95 00 FF 91 81 71 FE 47 00 00 4E 41 53 60
  
• 2016/12/11 23:01:30 5C12045E r (reader) hdpplus_hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2016/12/11 23:01:30 5C12045E r (reader) hdpplus_hd01 [mouse] Calculated work ETU is 100.81 us reader mhz = 369
• 2016/12/11 23:01:30 5C12045E r (reader) hdpplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75100
• 2016/12/11 23:01:30 5C12045E r (reader) hdpplus_hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
• 2016/12/11 23:01:43 5C12045E r (reader) hdpplus_hd01 [mouse] Warning: Card returned error on setting ifsd value to 28
• 2016/12/11 23:01:44 5C12045E r (reader) hdpplus_hd01 [mouse] card system not supported
• 2016/12/11 23:01:44 5C12045E r (reader) hdpplus_hd01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2016/12/11 23:01:44 5C12045E r (reader) hdpplus_hd01 [mouse] card initializing error

Dann hätte ich noch zu bieten, dass ich das smartreader protokoll nehme und den Reader als Device zuweise
Device = SRv2;Serial:SmartV2

Da erkennt er ihn...aber dann die Karte nicht

Spoiler

• 2016/12/11 23:16:21 06D5EA72 h (reader) Reader-2 [smartreader] Restarting reader
• 2016/12/11 23:16:21 06D5EA72 h (reader) Reader-2 [smartreader] creating thread for device SRv2;Serial:SmartV2
• 2016/12/11 23:16:21 2B5EB270 r (reader) Reader-2 [smartreader] Reader initialized (device=SRv2;Serial:SmartV2, detect=cd, mhz=369, cardmhz=369)
• 2016/12/11 23:16:22 2B5EB270 r (reader) Reader-2 [smartreader] card detected
• 2016/12/11 23:16:29 2B5EB270 r (reader) Reader-2 [smartreader] Error activating card

Und nun?! Ich weiss nicht mehr weiter -.-

 

[supraracer]

Poste mal deine komplette oscam.server oder noch besser alle Configs.

-supraracer

 

[marc1974]

Hi....gern....server config hab ich n bischen rumgetestet, daher 3 Reader...aber halt nicht Zeitgleich aktiv

oscam.server

Spoiler

[reader]
label = hdpplus_hd01
enable = 0
protocol = mouse
device = /dev/ttyUSB0
password = dvbapi
smargopatch = 1
caid = 1830
boxkey = A7xxxxxxxC
rsakey = BF3xxxx4DD5
fix07 = 0
detect = cd
detect_seca_nagra_tunneled_card= 0
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,3,2,0

[reader]
label = Reader-2
description = hd01
protocol = smartreader
device = SRv2;Serial:SmartV2
boxkey = A7642xxxxx7C
rsakey = BF358B5461xxx4DD5
detect = cd
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,1,2,0
use_gpio = 1

[reader]
label = test
enable = 0
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 1830
detect = cts
mhz = 368
cardmhz = 600
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1

oscam.config

Spoiler

[global]
disablelog = 1
serverip = 192.168.0.7
logfile = stdout;/opt/OsCAM/var/oscam.log
nice = -1
maxlogsize = 100
lb_mode = 1

[cache]

[cccam]
port = 12500
serverip = 192.168.0.7
nodeid = 8EE699E610AD15E4
version = 2.3.0

[webif]
httpport = 8589
httpuser = admin
httppwd = admin
httprefresh = 10
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,192.168.0.0-192.168.255.255,0.0.0.0-255.255.255.255

Auf die User hab ich verzichtet, weil ich ja erstmal nur die Karte laufen haben möchte.
Die oscam.version ist in meinem vorherigem Post.


Hier noch was aus dem log mit Degug Level 4

Spoiler

• 2016/12/12 18:33:54 4B864E75 r (reader) Reader-2 [smartreader] cardreader_do_checkhealth: !reader_card_inserted
• 2016/12/12 18:33:54 4B864E75 r (reader) Reader-2 [smartreader] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
• 2016/12/12 18:33:55 4B864E75 r (reader) Reader-2 [smartreader] cardreader_do_checkhealth: !reader_card_inserted
• 2016/12/12 18:33:55 4B864E75 r (reader) Reader-2 [smartreader] cardreader_do_checkhealth: reader->card_status = 4, ret = 0
• 2016/12/12 18:33:56 4B864E75 r (reader) Reader-2 [smartreader] card detected
• 2016/12/12 18:33:56 4B864E75 r (reader) Reader-2 [smartreader] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
• 2016/12/12 18:34:04 4B864E75 r (reader) Reader-2 [smartreader] Error activating card.
• 2016/12/12 18:34:21 4B864E75 r (-) -- Skipped 2 duplicated log lines --
• 2016/12/12 18:34:21 4B864E75 r (reader) Reader-2 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2016/12/12 18:34:21 4B864E75 r (reader) Reader-2 [smartreader] card initializing erro

yippeeeee....ich habs geschafft. Ich hatte T1 im Smartreader stehen....dachte eigentlich ich hätte das auf null. Jetzt liest er sie!