Hallo ich habe eine Easymous 2 am Pingulux mit einer S02 Karte.
Der log sagt mir jedes mal ERROR opening device /dev/ttyUSB0. Die easymous ist wie folgt eingestellt.
schalter 1 auf 5V
schalter 2 auf phoenix
schalter 3 auf nach oben
schalter 4 auf 6 Mhz
und mein reader dazu
oscam.server
und das sagt der log mit
oscam.log
Der log sagt mir jedes mal ERROR opening device /dev/ttyUSB0. Die easymous ist wie folgt eingestellt.
schalter 1 auf 5V
schalter 2 auf phoenix
schalter 3 auf nach oben
schalter 4 auf 6 Mhz
und mein reader dazu
oscam.server
reader]
label = sky
enable = 1
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
services = skyde,skyfullhd,skywelt,skyweltextra,skyfilm,skymusicchoiceextra,skyhd,sky3d,bluemovie,skyselect,skysonstige,!skybundesliga,!skysport,!hdplus,bigbrother
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000
group = 1
emmcache = 1,3,2
label = sky
enable = 1
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
services = skyde,skyfullhd,skywelt,skyweltextra,skyfilm,skymusicchoiceextra,skyhd,sky3d,bluemovie,skyselect,skysonstige,!skybundesliga,!skysport,!hdplus,bigbrother
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
ident = 1702:000000
group = 1
emmcache = 1,3,2
und das sagt der log mit
oscam.log
2000/01/01 0:01:06 296A3000 s >> OSCam << cardserver started, version 1.10rc-svn, build #5705 (sh4-amino-linux)
2000/01/01 0:01:06 296A3000 s version=1.10rc-svn, build #5705, system=sh4-amino-linux, nice=-1
2000/01/01 0:01:06 296A3000 s client max. idle=120 sec, debug level=0
2000/01/01 0:01:06 296A3000 s max. logsize=300 Kb, loghistorysize=4096 bytes
2000/01/01 0:01:06 296A3000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:01:06 296A3000 s The current system time is smaller than the build date (Jul 24 2011). Waiting 5s for time to correct...
2011/09/21 12:58:31 296A3000 s services reloaded: 0 services freed, 17 services loaded, rejected 0
2011/09/21 12:58:31 296A3000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2011/09/21 12:58:31 296A3000 s signal handling initialized (type=sysv)
2011/09/21 12:58:31 296A3000 s 207 service-id's loaded in 14ms
2011/09/21 12:58:31 296A3000 s 140 tier-id's loaded
2011/09/21 12:58:31 296A3000 s 7 provid's loaded
2011/09/21 12:58:31 296A3000 s monitor: initialized (fd=6, port=xxx)
2011/09/21 12:58:31 296A3000 s camd33: disabled
2011/09/21 12:58:31 296A3000 s camd35: disabled
2011/09/21 12:58:31 296A3000 s cs378x: disabled
2011/09/21 12:58:31 296A3000 s newcamd: disabled
2011/09/21 12:58:31 296A3000 s cccam: initialized (fd=7, port=xxxxx, crypted)
2011/09/21 12:58:31 296A3000 s radegast: disabled
2011/09/21 12:58:31 2AEBC4E8 h HTTP Server listening on port xxxx
2011/09/21 12:58:31 296A3000 s http thread started
2011/09/21 12:58:31 296A3000 s creating thread for device /dev/ttyUSB0
2011/09/21 12:58:31 2B6BC4E8 r reader thread started (thread=xxxxxxxx, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/09/21 12:58:31 2B6BC4E8 r ERROR opening device /dev/ttyUSB0
2011/09/21 12:58:31 2B6BC4E8 r Cannot open device: /dev/ttyUSB0
2000/01/01 0:01:06 296A3000 s version=1.10rc-svn, build #5705, system=sh4-amino-linux, nice=-1
2000/01/01 0:01:06 296A3000 s client max. idle=120 sec, debug level=0
2000/01/01 0:01:06 296A3000 s max. logsize=300 Kb, loghistorysize=4096 bytes
2000/01/01 0:01:06 296A3000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:01:06 296A3000 s The current system time is smaller than the build date (Jul 24 2011). Waiting 5s for time to correct...
2011/09/21 12:58:31 296A3000 s services reloaded: 0 services freed, 17 services loaded, rejected 0
2011/09/21 12:58:31 296A3000 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2011/09/21 12:58:31 296A3000 s signal handling initialized (type=sysv)
2011/09/21 12:58:31 296A3000 s 207 service-id's loaded in 14ms
2011/09/21 12:58:31 296A3000 s 140 tier-id's loaded
2011/09/21 12:58:31 296A3000 s 7 provid's loaded
2011/09/21 12:58:31 296A3000 s monitor: initialized (fd=6, port=xxx)
2011/09/21 12:58:31 296A3000 s camd33: disabled
2011/09/21 12:58:31 296A3000 s camd35: disabled
2011/09/21 12:58:31 296A3000 s cs378x: disabled
2011/09/21 12:58:31 296A3000 s newcamd: disabled
2011/09/21 12:58:31 296A3000 s cccam: initialized (fd=7, port=xxxxx, crypted)
2011/09/21 12:58:31 296A3000 s radegast: disabled
2011/09/21 12:58:31 2AEBC4E8 h HTTP Server listening on port xxxx
2011/09/21 12:58:31 296A3000 s http thread started
2011/09/21 12:58:31 296A3000 s creating thread for device /dev/ttyUSB0
2011/09/21 12:58:31 2B6BC4E8 r reader thread started (thread=xxxxxxxx, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/09/21 12:58:31 2B6BC4E8 r ERROR opening device /dev/ttyUSB0
2011/09/21 12:58:31 2B6BC4E8 r Cannot open device: /dev/ttyUSB0