DT CW NewCS Yardim

[proto]

Selam Beyler,

benim elimde bi tane DT CW Euro Karti var ve bir tane
Linux NewCS Server (newcs-1_67RC1) var
USB-Hub ve Smargo+ takili.

Fergusson Avira200 Receiver var. Avira' nin icinde newcamd client var.

Simdi benim istedigim bu Receiveri Serverlen baglamak.

Configler söyle:

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Smargo:
MODE Auto
KERNEL normal
T-MODE t = 0
EGT =0
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

<?xml version="1.0"?>
<newCSconfig>
    <readers name="Standard Phoenix on PC">
        <device>
            <name>Smargo on USB0</name>
            <type>smartreader</type>
            <mhz>600</mhz>
            <node>/dev/ttyUSB0</node>
            <parity>even</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            <blockC0>Yes</blockC0>
            <crypto-special>No</crypto-special>
            <PTShandshake>No</PTShandshake>
            <carddetect>Yes</carddetect>
            <newcamd_port>15050</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode>
            <priority>round</priority>
        </device>
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
    <httpd>
        <server>
            <port>8080</port>
            <enabled>yes</enabled>
        </server>
        <user>
            <name>newcs</name>
            <password>newcs</password>
            <accesslevel>admin</accesslevel>
        </user>
    </httpd>
    <debug>
            <password>newcs</password>
            <mode>simple</mode>
            <level>internal</level>
            <type>all</type>
            <output>console,tcp</output>
            <tcp_port>1001</tcp_port>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
            <enabled>Yes</enabled>
            <name>newcs</name>
            <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
            <user>
                <name>abcdefg</name>
                <password>123456</password>
                <au>on</au>
            </user>
    </newcamdserver>
</newCSconfig>

Newcs söyle bi mesaj veriyor

[ 05:59:52 ] [ Newcamd ] new connection from 192.xxx.xx.xx on socket 6
[ 05:59:52 ] [ Newcamd:15050 ] Connection from 192.xxx.xx.xx
[ 05:59:52 ] [ Newcamd:15050 ] User abcdefg logged in, client: VDR-SC
[ 05:59:52 ] [ Newcamd:15050 ] Connection from abcdefg to not-ready server!
[ 05:59:52 ] [ Newcamd ] new connection from 192.xxx.xx.xx on socket 6
[ 05:59:52 ] [ Newcamd:15050 ] Connection from 192.xxx.xx.xx
[ 05:59:52 ] [ Newcamd:15050 ] Can't decrypt client msg, rejecting!

This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 12:12:45
Reading Config file from /etc/newcs.xml
TCP-log password is enabled, set to: newcs
level: internal
type: all
output: console,tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
TCP log options: level 1 type 255
[ 06:09:56 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 06:09:56 ] [ Config ] Option <blockc0> for device 0 (Smargo on USB0) not present, defaulting to NO
[ 06:09:56 ] [ Config ] Pincode for device 0 (Smargo on USB0): 0000
[ 06:09:56 ] [ Config ] Option <sid> for device 0 (Smargo on USB0) not present, no static sids added to filter
[ 06:09:56 ] [ Config ] Option <protectedsid> for device 0 (Smargo on USB0) not present, no PIN Code will be sent
[ 06:09:56 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 06:09:56 ] [ Newcamd ] Server name : newcs
[ 06:09:56 ] [ Newcamd ] Des key     : 0102030405060708091011121314
[ 06:09:56 ] [ Config ] Option <hostname> or <port> not present for User: abcdefg, DISABLING reverse login
[ 06:09:56 ] [ Config ] Option <spider> not present for User: abcdefg, defaulting to NO
[ 06:09:56 ] [ Config ] Option <sidoverride> not present for User: abcdefg, defaulting to OFF
[ 06:09:56 ] [ Config ] Option <readers> not present for User: abcdefg, NO reader control enabled
[ 06:09:56 ] [ Newcamd ] User 2: abcdefg, Pass: 123456, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 06:09:56 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 06:09:56 ] [ EMM Cache ] Initialising dynamic Cache
[ 06:09:56 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 4658
[ 06:09:56 ] Calibrating delay loops
[ 06:09:56 ] usleep(5) takes: 0 s 40 us
[ 06:09:56 ] usleep(10) takes: 0 s 40 us
[ 06:09:56 ] usleep(100) takes: 0 s 131 us
[ 06:09:56 ] usleep(500) takes: 0 s 528 us
[ 06:09:56 ] Allocation memory for 200 regular users
[ 06:09:56 ] [ Loader ] Starting Telnet on port 1001
[ 06:09:56 ] [ SockSrv ] Server thread started
Can't create server: Address already in use
[ 06:09:56 ] [ Loader ] Reader type 11 on node /dev/ttyUSB0
[ 06:09:56 ] [ CardMan ] Reseting reader parameters
[ 06:09:56 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 06:09:56 ] [ SmartReader ] Trying to set SmartReader to SmartReader+ mode on node: /dev/ttyUSB0
[ 06:09:56 ] Setting 5 databits (CMD Mode)
[ 06:09:56 ] [ Serial ] Write byte on fd 4 (len=4, delay=0us)
[ 06:09:56 ] set_Fi_Di:
0000: 01 01 74 01                                      ..t.

[ 06:09:56 ] [ Serial ] Write byte on fd 4 (len=3, delay=0us)
[ 06:09:56 ] [ SmartReader ] Setting oscillator to: 6.00Mhz
[ 06:09:56 ] [ Serial ] Write byte on fd 4 (len=2, delay=0us)
[ 06:09:56 ] set_n_value:
0000: 03 00                                            ..

[ 06:09:56 ] [ Serial ] Write byte on fd 4 (len=2, delay=0us)
[ 06:09:56 ] set_protocol:
0000: 04 00                                            ..

[ 06:09:56 ] [ Serial ] Write byte on fd 4 (len=2, delay=0us)
[ 06:09:56 ] set_inversion:
0000: 05 00                                            ..

[ 06:09:56 ] Setting 8 databits (DATA Mode)
[ 06:09:56 ] [ Phoenix ] No card present in reader
[ 06:09:56 ] [ Loader ] Reset failed ...
[ 06:09:56 ] [ Card queue /dev/ttyUSB0 ] Starting...
[ 06:09:56 ] [ Loader ] Starting Newcamd Server on port 15050
[ 06:09:56 ] [ Newcamd ] Newcamd thread Server started on port 15050
newcamd: main loop
[ 06:09:56 ] [ NewCS ] Ready to GO! :)

Ve Karti Smargoya takdigim an sunlar geliyor.

[ 16:46:50 ] Setting 8 databits (DATA Mode)
[ 16:46:50 ] [ Phoenix ] Setting Parity to: EVEN
[ 16:46:50 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 16:46:50 ] [ Phoenix ] Setting Baud to custom -2147483648
[ 16:46:51 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 16:46:52 ] [ Loader ] Reset failed ...
[ 16:46:52 ] [ Loader ] Reader type 11 on node /dev/ttyUSB0
[ 16:46:52 ] [ CardMan ] Reseting reader parameters
[ 16:46:52 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 16:46:52 ] [ SmartReader ] Trying to set SmartReader to SmartReader+ mode on node: /dev/ttyUSB0
[ 16:46:52 ] Setting 5 databits (CMD Mode)
[ 16:46:52 ] [ Serial ] Write byte on fd 5 (len=4, delay=0us)
[ 16:46:52 ] set_Fi_Di:
0000: 01 01 74 01                                      ..t.

[ 16:46:52 ] [ Serial ] Write byte on fd 5 (len=3, delay=0us)
[ 16:46:52 ] [ SmartReader ] Setting oscillator to: 6.00Mhz
[ 16:46:52 ] [ Serial ] Write byte on fd 5 (len=2, delay=0us)
[ 16:46:52 ] set_n_value:
0000: XX XX                                            ..

[ 16:46:52 ] [ Serial ] Write byte on fd 5 (len=2, delay=0us)
[ 16:46:52 ] set_protocol:
0000: XX XX                                            ..

[ 16:46:52 ] [ Serial ] Write byte on fd 5 (len=2, delay=0us)
[ 16:46:52 ] set_inversion:
0000: XX XX                                            ..

Karti Smargoya takdigim an NewCS Webinterface cok yavas oluyor bu normal mi aceba??

Yaptigim xml dogru mu aceba ve newcs'sin yaninda baska bi emu lazimi
Camd3 ve mgcam?


Yardimlariniz icin simdiden cok tesekkürler