DM800se mit Oscam und 09CD

[vatoloco313]

hi hoffe könnt mir helfen..
und zwar hab ich mir ein Prepaid abo von slyit geholt und möchte das gerne per oscm laufen lassen und nur zum aktivieren in den original receiver.
Meine config ist so:

Spoiler

[reader]
label = SkyIT
protocol = internal
device = /dev/sci0
caid = 09CD
boxid = xxxxxxx
detect = cd
ident = 09CD:000000
group = 6
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 183,81
lb_weight = 300
blocknano = all
audisabled = 1
ndsversion = 2

Karte wird erkannt aber es wird kein kanal hell..
steht entweder (by not found) oder er bekommt ecm aber es kommt trotzdem kein bild..

Im original Receiver läuft sie ohne Probleme..

Worn könnte das liegen??

 

[supraracer]

AW: DM800se mit Oscam und 09CD

Bin gerade nicht ganz sicher, aber betreibt Sky IT nicht schon seit letztem Jahr pairing?

-supraracer

 

[vatoloco313]

Ja aber die Karte wird ja erkannt..
Also müsste sie laufen bei anderen läuft es auch...
Bin mir nur nicht sicher ob ich newcamd dazu nehmen muss...

also wenn jemand eine idee hat bitte melden...
Er findet immer die ecms aber es kommt kein Bild...

 

[dodo83]

AW: DM800se mit Oscam und 09CD

hi,
poste mal das ganze log mit vom Start bis zur Sender abfrage dann kann Dir bestimmt einer mehr dazu sagen

 

[vatoloco313]

AW: DM800se mit Oscam und 09CD

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Aug 2 21:41:26 2014
-------------------------------------------------------------------------------
2014/08/02 21:41:26 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8835 (mipsel-newnigma2-linux-gnu-ssl)
2014/08/02 21:41:26 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 19408
2014/08/02 21:41:26 0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2014/08/02 21:41:26 0 s userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2014/08/02 21:41:26 0 s signal handling initialized
2014/08/02 21:41:26 0 s 829 service-id's loaded in 22ms
2014/08/02 21:41:26 0 s 126 tier-id's loaded
2014/08/02 21:41:26 0 s 960 provid's loaded
2014/08/02 21:41:26 0 s 762 entries read from oscam.whitelist
2014/08/02 21:41:26 0 s cccam: initialized (fd=5, port=xxxx)
2014/08/02 21:41:26 0 s SkyIT [internal] creating thread for device /dev/sci0
2014/08/02 21:41:26 ABA668 r SkyIT [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2014/08/02 21:41:26 AB77E0 h webif: decompressed 53538 bytes back into 153584 bytes
2014/08/02 21:41:26 AB77E0 h HTTP Server running. ip=0.0.0.0 port=xxxxx
2014/08/02 21:41:26 0 s waiting for local card init
2014/08/02 21:41:27 ABA668 r SkyIT [internal] card detected
2014/08/02 21:41:28 ABA668 r SkyIT [internal] ATR: xxxxxxx
2014/08/02 21:41:28 ABA668 r SkyIT [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/08/02 21:41:28 ABA668 r SkyIT [internal] Calculated work ETU is 18.60 us
2014/08/02 21:41:28 ABA668 r SkyIT [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2014/08/02 21:41:29 ABA668 r SkyIT [internal] Card type: ITTV
2014/08/02 21:41:29 ABA668 r SkyIT [internal] Rom version: 40T4
2014/08/02 21:41:29 ABA668 r SkyIT [internal] parental lock setting: FF FF FF FF
2014/08/02 21:41:29 ABA668 r SkyIT [internal] type: VideoGuard Sky Italia (09CD), caid: 09CD
2014/08/02 21:41:29 ABA668 r SkyIT [internal] serial: ########, BoxID: ########, baseyear: 1997
2014/08/02 21:41:29 ABA668 r SkyIT [internal] ready for requests
2014/08/02 21:41:29 ABA668 r SkyIT [internal] found card system videoguard2
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] card detected
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] type: VideoGuard Sky Italia (09CD)
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 000b, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 021b, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 022e, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 0295, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 029b, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 02b3, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 02b7, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 02f1, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:29 ABA668 r SkyIT [videoguard2] tier: 02f3, expiry date: 2014/09/30-01:00:00
2014/08/02 21:41:32 0 s init for all local cards done
2014/08/02 21:41:32 0 s anti cascading disabled
2014/08/02 21:41:32 76E0C2B8 c plain dvbapi-client granted (dvbapi, au=auto (8 reader))
2014/08/02 21:41:32 76E0C2B8 c Detected /dev/dvb/adapter0/demux0 Api: 0
2014/08/02 21:41:36 76E0C2B8 c [DVBAPI] Tuner sends PMT command 3 for channel 2AAF
2014/08/02 21:41:36 76E0C2B8 c [ADD PID 0] CAID: 0919 ECM_PID: 064B PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD PID 1] CAID: 093B ECM_PID: 06AF PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD PID 2] CAID: 09CD ECM_PID: 0713 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 0] CAID: 0919 ECM_PID: 064B PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 1] CAID: 093B ECM_PID: 06AF PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 2] CAID: 09CD ECM_PID: 0713 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 0] CAID: 0919 ECM_PID: 064B PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 1] CAID: 093B ECM_PID: 06AF PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 2] CAID: 09CD ECM_PID: 0713 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD PID 3] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD PID 4] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD PID 5] CAID: 09CD ECM_PID: 073A PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 3] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 4] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c [ADD STREAM 5] CAID: 09CD ECM_PID: 073A PROVID: 000000
2014/08/02 21:41:36 76E0C2B8 c Found 6 ECMpids and 13 STREAMpids in PMT
2014/08/02 21:41:36 76E0C2B8 c New program number: 2AAF (Sky Supercalcio) [pmt_list_management 3]
2014/08/02 21:41:36 76E0C2B8 c [DVBAPI] Demuxer #0 trying to descramble PID #2 CAID 09CD PROVID 000000 ECMPID 0713 ANY CHID
2014/08/02 21:41:36 76E0C2B8 c dvbapi (09CD&000000/039A/2AAF/B7:41EB2192237415A45637BA9A57E58850): rejected group (1 ms) - Sky Supercalcio (no matching reader)
2014/08/02 21:41:36 0 --- Skipped 1 duplicated log lines ---
2014/08/02 21:41:36 76E0C2B8 c [DVBAPI] Demuxer #0 trying to descramble PID #5 CAID 09CD PROVID 000000 ECMPID 073A ANY CHID
2014/08/02 21:41:36 76E0C2B8 c dvbapi (09CD&000000/0396/2AAF/B7:CACBD57B37E639B2C1A0447402A7F2AE): found (106 ms) by SkyIT - Sky Supercalcio
2014/08/02 21:41:44 76E0C2B8 c dvbapi (09CD&000000/0396/2AAF/B7:E598E4652DEB80AA3787180874347894): found (94 ms) by SkyIT - Sky Supercalcio

Aber es kommt kein bild

 

[dodo83]

AW: DM800se mit Oscam und 09CD

dann mal komplette Config posten, also die oscam.conf und oscam.user dazu
eventuell mal eine neuere OScam testen

 

[vatoloco313]

AW: DM800se mit Oscam und 09CD

habe jetzt die aktuellste oscam drauf, jetzt sieht der log so aus:
schreibt jetzt card is paired...

Spoiler

2014/08/03 01:26:51 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9810 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/08/03 01:26:51 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3240
2014/08/03 01:26:51 0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2014/08/03 01:26:51 0 s userdb reloaded: 32 accounts loaded, 0 expired, 31 disabled
2014/08/03 01:26:51 0 s signal handling initialized
2014/08/03 01:26:51 0 s 829 service-id's loaded in 14ms
2014/08/03 01:26:51 0 s 126 tier-id's loaded
2014/08/03 01:26:51 0 s 960 provid's loaded
2014/08/03 01:26:51 0 s 762 entries read from oscam.whitelist
2014/08/03 01:26:51 0 s cccam: initialized (fd=5, port=9119)
2014/08/03 01:26:51 0 s SkyIT [internal] creating thread for device /dev/sci0
2014/08/03 01:26:51 0 s waiting for local card init
2014/08/03 01:26:51 77600618 r SkyIT [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/03 01:26:51 DD38E8 h webif: decompressed 151112 bytes back into 360416 bytes
2014/08/03 01:26:51 DD38E8 h HTTP Server running. ip=0.0.0.0 port=19445
2014/08/03 01:26:52 77600618 r SkyIT [internal] card detected
2014/08/03 01:26:53 77600618 r SkyIT [internal] ATR:
2014/08/03 01:26:53 77600618 r SkyIT [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/08/03 01:26:53 77600618 r SkyIT [internal] TEST tempo mhz check = 500 mhz
2014/08/03 01:26:53 77600618 r SkyIT [internal] Calculated work ETU is 20.67 us reader mhz = 450
2014/08/03 01:26:53 77600618 r SkyIT [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/03 01:26:54 77600618 r SkyIT [internal] Card type: ITTV
2014/08/03 01:26:54 77600618 r SkyIT [internal] Rom version: 40T4
2014/08/03 01:26:54 77600618 r SkyIT [internal] Credit available on card: 0 euro
2014/08/03 01:26:54 77600618 r SkyIT [internal] FuseByte: 25
2014/08/03 01:26:54 77600618 r SkyIT [internal] Region Code: PUGLI_00
2014/08/03 01:26:54 77600618 r SkyIT [internal] Country Code: ITA
2014/08/03 01:26:54 77600618 r SkyIT [internal] Pincode read: 0000
2014/08/03 01:26:54 77600618 r SkyIT [internal] PCB settings: FF FF FF FF
2014/08/03 01:26:54 77600618 r SkyIT [internal] type: VideoGuard Sky Italia (09CD), caid: 09CD
2014/08/03 01:26:54 77600618 r SkyIT [internal] serial: ########, BoxID: ########, baseyear: 1997
2014/08/03 01:26:54 77600618 r SkyIT [internal] ready for requests
2014/08/03 01:26:54 77600618 r SkyIT [internal] found card system videoguard2
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] card detected
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] type: VideoGuard Sky Italia (09CD)
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 000b, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 021b, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 022e, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 0295, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 029b, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 02b3, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 02b7, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 02f1, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:54 77600618 r SkyIT [videoguard2] tier: 02f3, expiry date: 2014/09/30-01:00:00
2014/08/03 01:26:58 0 s init for all local cards done
2014/08/03 01:26:58 0 s anti cascading disabled
2014/08/03 01:26:58 77602C10 c plain dvbapi-client granted (dvbapi, au=auto (8 reader))
2014/08/03 01:26:58 77602C10 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/08/03 01:27:01 77602C10 c [ADD PID 0] CAID: 0919 ECM_PID: 064B PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD PID 1] CAID: 093B ECM_PID: 06AF PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD PID 2] CAID: 09CD ECM_PID: 0713 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 0] CAID: 0919 ECM_PID: 064B PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 1] CAID: 093B ECM_PID: 06AF PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 2] CAID: 09CD ECM_PID: 0713 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 0] CAID: 0919 ECM_PID: 064B PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 1] CAID: 093B ECM_PID: 06AF PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 2] CAID: 09CD ECM_PID: 0713 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD PID 3] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD PID 4] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD PID 5] CAID: 09CD ECM_PID: 073A PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 3] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 4] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2014/08/03 01:27:01 77602C10 c [ADD STREAM 5] CAID: 09CD ECM_PID: 073A PROVID: 000000
2014/08/03 01:27:01 77602C10 c Found 6 ECMpids and 13 STREAMpids in PMT
2014/08/03 01:27:01 77602C10 c [DVBAPI] Receiver wants to demux srvid 2AAF on adapter 0000 camask 0008 index 0003 pmtpid 0467
2014/08/03 01:27:01 77602C10 c New program number: 2AAF (Sky Supercalcio) [pmt_list_management 3]
2014/08/03 01:27:01 77602C10 c [DVBAPI] Demuxer #0 trying to descramble PID #2 CAID 09CD PROVID 000000 ECMPID 0713 ANY CHID PMTPID 0467 VPID 00A2
2014/08/03 01:27:01 77600618 r SkyIT [videoguard2] classD3 ins54: no cw --> Card is paired
2014/08/03 01:27:01 77602C10 c dvbapi (09CD&000000/039A/2AAF/B7:8EF1C85D32B998E65D34D96A2D3741DD): not found (103 ms) by SkyIT - Sky Supercalcio
2014/08/03 01:27:01 77602C10 c [DVBAPI] Demuxer #0 trying to descramble PID #5 CAID 09CD PROVID 000000 ECMPID 073A ANY CHID PMTPID 0467 VPID 00A2
2014/08/03 01:27:01 77602C10 c dvbapi (09CD&000000/0396/2AAF/B7:8F8AB1416DFAEE57BD6E2892A77B07F7): found (111 ms) by SkyIT - Sky Supercalcio
2014/08/03 01:27:05 77602C10 c dvbapi (09CD&000000/0396/2AAF/B7:8A5B766B7F6020CAFD3666313F2BF209): found (111 ms) by SkyIT - Sky Supercalcio
2014/08/03 01:27:15 77602C10 c dvbapi (09CD&000000/0396/2AAF/B7:4EFFB3AAF5B2305D248055D8FD2B1213): found (111 ms) by SkyIT - Sky S

 

[dodo83]

AW: DM800se mit Oscam und 09CD

dann sollten die ECM nicht erfolgreich abgefragt werden meiner meinung nach
ist halt bei den Deutschen Sky Karten so

 

[vatoloco313]

AW: DM800se mit Oscam und 09CD

[global]
loghistorysize = 1024
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
lb_mode = 1
lb_save = 750
lb_retrylimit = 900
lb_savepath = /tmp/.oscam/stat
failbantime = 360
failbancount = 2

[cccam]
port = xxx
nodeid = xx
version = 2.2.1
reshare = 1
ignorereshare = 1
stealth = 1


[dvbapi]
enabled = 1
au = 1
user = xx
boxtype = xx

[webif]
httpport = xxx
httpuser = xxx
httppwd = xxxx
httphelplang = de
httphideidleclients = 1
httpallowed = 192.168.178.0-192.168.178.255



und hier user:

[account]
user = xxx
pwd = xxx
uniq = 3
keepalive = 1
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2,3,4,6
cccstealth = 0

 

[supraracer]

AW: DM800se mit Oscam und 09CD

2014/08/03 01:26:54 77600618 r SkyIT [internal] FuseByte: 25
Bei einer Sky.de Karte ist das der Super-GAU (Karte mit original Receiver gepairt). Ob es bei deiner Sky.it Karte auch so ist weiß ich nicht, ist aber anzunehmen da beides videoguard2 ist und Sky.XX bestimmt nicht in jedem Land das Rad neu erfindet. In diesem deutschsprachigen Bereich des Forum ist hauptsächlich für Sky.de/Sky.at Erfahrung vorhanden. Aber schau doch am besten mal hier im Forum bei den Italienischen Kollegen vorbei, die müssten ja mehr wissen: Link ist nicht mehr aktiv.

-supraracer

 

[vatoloco313]

AW: DM800se mit Oscam und 09CD

so wie ich es verstehe ist ja jede sky.it karte gepairt da sie ja auch nur noch im original receiver geupdated werden kann..
oder verstehe ich da was falsch-???

 

[supraracer]

AW: DM800se mit Oscam und 09CD

Ich kann dir nur sagen wie es Sky.de macht, ob es bei Sky.it genau so ist weiß ich nicht, deshalb der Hinweis auf den italienischen CS Bereich hier im Forum, da müsste mehr Erfahrung mit deiner Karte sein.
Vor allem haben wir in Deutschland keine Prepaid Karten, da kann es eh noch mal anderes sein.

-supraracer

 

[vatoloco313]

AW: DM800se mit Oscam und 09CD

Nur habe ich bis jetzt immer oscam.conf und User mit mgcamd, was ich ja nicht habe..

 

[vatoloco313]

AW: DM800se mit Oscam und 09CD

jetzt erkennt er meine HD+ und meine V13 nicht mehr seitdem die neue oscam version drauf ist...

hier mal log:

Spoiler

2014/08/03 12:07:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9810 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/08/03 12:07:49 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3464
2014/08/03 12:07:49 0 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2014/08/03 12:07:49 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/08/03 12:07:49 0 s signal handling initialized
2014/08/03 12:07:49 0 s 829 service-id's loaded in 14ms
2014/08/03 12:07:49 0 s 126 tier-id's loaded
2014/08/03 12:07:49 0 s 960 provid's loaded
2014/08/03 12:07:49 0 s 638 entries read from oscam.whitelist
2014/08/03 12:07:49 0 s cccam: initialized (fd=5, port=9119)
2014/08/03 12:07:49 0 s sky [internal] creating thread for device /dev/sci0
2014/08/03 12:07:49 0 s hd_plus [internal] creating thread for device /dev/sci1
2014/08/03 12:07:49 0 s waiting for local card init
2014/08/03 12:07:49 A086A8 r hd_plus [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2014/08/03 12:07:49 A067E8 r sky [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2014/08/03 12:07:49 775004B0 h webif: decompressed 151112 bytes back into 360416 bytes
2014/08/03 12:07:49 775004B0 h HTTP Server running. ip=0.0.0.0 port=1
2014/08/03 12:07:50 A067E8 r sky [internal] card detected
2014/08/03 12:07:50 A086A8 r hd_plus [internal] card detected
2014/08/03 12:07:51 A067E8 r sky [internal] ATR: xxxx
2014/08/03 12:07:51 A067E8 r sky [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/08/03 12:07:51 A067E8 r sky [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/03 12:07:51 A067E8 r sky [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/03 12:07:51 A086A8 r hd_plus [internal] ATR: xxxxx
2014/08/03 12:07:51 A086A8 r hd_plus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/03 12:07:51 A086A8 r hd_plus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/08/03 12:07:51 A086A8 r hd_plus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/08/03 12:07:53 A086A8 r hd_plus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/03 12:07:54 A067E8 r sky [internal] card system not supported
2014/08/03 12:07:54 A067E8 r sky [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/03 12:07:54 A086A8 r hd_plus [internal] detect native nagra card
2014/08/03 12:07:55 A067E8 r sky [internal] ATR: xxxxxx
2014/08/03 12:07:55 A067E8 r sky [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/08/03 12:07:55 A067E8 r sky [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/03 12:07:55 A067E8 r sky [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/03 12:07:56 A086A8 r hd_plus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/08/03 12:07:57 A067E8 r sky [internal] card system not supported
2014/08/03 12:07:57 A067E8 r sky [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/03 12:07:57 A067E8 r sky [internal] card initializing error
2014/08/03 12:07:59 A086A8 r hd_plus [internal] T1 Resync command error, trying to reactivate!
2014/08/03 12:08:00 A086A8 r hd_plus [internal] ATR: xxxx
2014/08/03 12:08:00 A086A8 r hd_plus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/03 12:08:00 A086A8 r hd_plus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/08/03 12:08:00 A086A8 r hd_plus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/08/03 12:08:02 A086A8 r hd_plus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/03 12:08:04 A086A8 r hd_plus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/08/03 12:08:05 A086A8 r hd_plus [internal] T1 Resync command error, trying to reactivate!
2014/08/03 12:08:07 A086A8 r hd_plus [internal] ATR: xxx
2014/08/03 12:08:07 A086A8 r hd_plus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/03 12:08:07 A086A8 r hd_plus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/08/03 12:08:07 A086A8 r hd_plus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/08/03 12:08:10 A086A8 r hd_plus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/03 12:08:10 A086A8 r hd_plus [internal] card system not supported
2014/08/03 12:08:10 A086A8 r hd_plus [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/03 12:08:11 A086A8 r hd_plus [internal] ATR: 3xxx
2014/08/03 12:08:11 A086A8 r hd_plus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/03 12:08:11 A086A8 r hd_plus [internal] Calculated work ETU is 101.09 us reader mhz = 368
2014/08/03 12:08:11 A086A8 r hd_plus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/08/03 12:08:13 A086A8 r hd_plus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/03 12:08:14 A086A8 r hd_plus [internal] detect native nagra card
2014/08/03 12:08:15 A086A8 r hd_plus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/08/03 12:08:18 A086A8 r hd_plus [internal] T1 Resync command error, trying to reactivate!
2014/08/03 12:08:19 A086A8 r hd_plus [internal] ATR: xxxx
2014/08/03 12:08:19 A086A8 r hd_plus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/03 12:08:19 A086A8 r hd_plus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/08/03 12:08:19 A086A8 r hd_plus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/08/03 12:08:21 A086A8 r hd_plus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/03 12:08:23 A086A8 r hd_plus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/08/03 12:08:25 A086A8 r hd_plus [internal] T1 Resync command error, trying to reactivate!
2014/08/03 12:08:26 A086A8 r hd_plus [internal] ATR: xxxxx
2014/08/03 12:08:26 A086A8 r hd_plus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/08/03 12:08:26 A086A8 r hd_plus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/08/03 12:08:26 A086A8 r hd_plus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/08/03 12:08:29 A086A8 r hd_plus [internal] Warning: Card returned error on setting ifsd value to 160
2014/08/03 12:08:29 A086A8 r hd_plus [internal] card system not supported
2014/08/03 12:08:29 A086A8 r hd_plus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/03 12:08:29 A086A8 r hd_plus [internal] card initializing error
2014/08/03 12:08:29 0 s init for all local cards done
2014/08/03 12:08:29 0 s anti cascading disabled

und die server:

Spoiler

[reader]
label = sky
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 500
ident = 09C4:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 300
ndsversion = 2

[reader]
label = hd_plus
protocol = internal
device = /dev/sci1
services = hd+
caid = 1843
boxkey = xxxx
rsakey = xxx
detect = cd
mhz = 368
cardmhz = 368
ident = 1843:003411,1F1F1F
group = 4
emmcache = 1,3,2
lb_weight = 300

erkennt keine karte mehr bis gestern lief das alles....

 

[Advocat]

AW: DM800se mit Oscam und 09CD

Karte wird erkannt aber es wird kein kanal hell..
steht entweder (by not found) oder er bekommt ecm aber es kommt trotzdem kein bild..

Im original Receiver läuft sie ohne Probleme..

Worn könnte das liegen??

Habe es noch am 17.07.2014 gepostet, HIER!

Anscheinend gehen nicht mehr alle SD Kanäle, so hat es auch mit die HD Kanäle angefangt!
Supercalcio geht noch, und einige von Standard TV!