Digital Eliteboard - Das Digitale Technik Forum
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
AW: DM500HD : OpenPLi 4.0 with 750+ IPTV FREE Channels for Ferrari Japhar Sim
Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!
- DM500HD+ :
Changes since previous release:
- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!
- DM500HD+ :
Sie müssen registriert sein, um Links zu sehen.
Changes since previous release:
- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
AW: DM500HD : OpenPLi 4.0 with 750+ IPTV FREE Channels for Ferrari Japhar Sim
OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)
Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...
DM500HD+ :
OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)
Du musst angemeldet sein, um Bilder zu sehen.
Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...
DM500HD+ :
Sie müssen registriert sein, um Links zu sehen.
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenPli 4.0 IPTV by MastaG / Japhar Team with 1200 FREE IPTV Channels and with GStreamer 1.9.0.1 (April 15th 2016)
Changes:
- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed
DM500HD+ Japhar :
Du musst angemeldet sein, um Bilder zu sehen.
Changes:
- New gstreamer 1.9.0.1 recipes based on christophecvr's github (small changes for PLi4)
- Upgrade glib2.0 and some other components like gobject-introspection to satisfy the new gstreamer recipes
- gstreamer1.0-libav is built using it's minimal libav with only support for wma (thank you chris)
It's pre-installed on all receivers except for the ones with only 64MB of flash (dm800/800se/500hd)
- Full ffmpeg 3.0.1 package is in the feeds for use with IPTV Player's exteplayer3 (thx to Taapat for the original bbappend)
Login with telnet and issue: opkg update && opkg install ffmpeg
- Latest openpli-oe-core changes
- Latest enigma2 changes
- spark: libeplayer3 is pre-installed now (also in the feeds) for movie players with support for this library
Note: servicemp3 still uses gstreamer
- spark: some OpenPLi enigma2 backports (since Taapat doesn't maintain his enigma2 branch anymore)
The servicemp3 memleak patch has been applied with some other patches/commits I found useful
- spark: don't force async mode on the dvbaudiosink anymore, it's now the same as all other receivers again
- Add Vu+ Solo 2 Lonrisun V4 (v1 and v2) images + feed
DM500HD+ Japhar :
Sie müssen registriert sein, um Links zu sehen.
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)
Changes:
- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!
Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.
Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does
DM500HD+ Japhar :
Du musst angemeldet sein, um Bilder zu sehen.
Changes:
- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!
Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.
Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does
DM500HD+ Japhar :
Sie müssen registriert sein, um Links zu sehen.
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenPLi 4.0 IPTV v20 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3
- Support for BlackHole skins (the analog arrows), so the original mx-hq9w also works flawless on PLi now
- New gstreamer 1.9.1.1 with many fixes
- New ca-certificates
- OpenPLi now features a overscan wizard which lets you adjust the OSD to the borders of your TV (by PLi-team)
- Python-pycrypto now installed by default to satisfy many plugins
- Lots of stuff I forgot
DM500HD Japhar :
Du musst angemeldet sein, um Bilder zu sehen.
- Support for BlackHole skins (the analog arrows), so the original mx-hq9w also works flawless on PLi now
- New gstreamer 1.9.1.1 with many fixes
- New ca-certificates
- OpenPLi now features a overscan wizard which lets you adjust the OSD to the borders of your TV (by PLi-team)
- Python-pycrypto now installed by default to satisfy many plugins
- Lots of stuff I forgot
DM500HD Japhar :
Sie müssen registriert sein, um Links zu sehen.
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
BlackHole IPTV v20 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3
- Original cvs.
- Blazing fast.
- GStreamer 1.9.1.1
- Using the mx-hq9w skin (which is their latest official skin they are using atm).
- Backported fixes from OpenPLi, including a fix for a possible GS.
- Applied Dreambox specific fixes for ac3/dts bypass support.
- Applied backports from official PLi to support the latest gstreamer and eLogging interface.
- Implemented the official Vu+ addon manager using the Green button (inside the Blue panel).
- Feeds online.
Thank you MastaG !
Enjoy !
DM500HD Japhar :
Du musst angemeldet sein, um Bilder zu sehen.
- Original cvs.
- Blazing fast.
- GStreamer 1.9.1.1
- Using the mx-hq9w skin (which is their latest official skin they are using atm).
- Backported fixes from OpenPLi, including a fix for a possible GS.
- Applied Dreambox specific fixes for ac3/dts bypass support.
- Applied backports from official PLi to support the latest gstreamer and eLogging interface.
- Implemented the official Vu+ addon manager using the Green button (inside the Blue panel).
- Feeds online.
Thank you MastaG !
Enjoy !
DM500HD Japhar :
Sie müssen registriert sein, um Links zu sehen.
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenPLi 4.0 IPTV v21 con GStreamer 1.11 and ExtePlayer3 with 1300 IPTV FREE FTA Channels
Here is the long waited OpenPLi 4.0 IPTV built by our Japhar Admin with GStreamer 1.11 and ExtePlayer3 (by Default)
- OpenPLi 4.0 from Japhar Team with IPTV (1300+ FREE FTA IPTV Channels)
We Thank MastaG for having handed us the sources last July of the v20 version for us to build all the newer versions. This image is a working much better than the v20, also if the v20 was the best and still the best compared with all other images around. We put a lot of work and efforts into it, wishing you all to enjoy that new release as soon as we would be happy with it.
This image is a MAJOR update, so you can reflash it or you can as well UPDATE IT ONLINE thru the Feeds that were updated today. Its few days we are working and testing it, we believe that now its time for all you to have it ! Enjoy ;o) it as well !
After few months work and improved software such as GStreamer to v1.11 and latest December 2016 ExtePlayer3, we are ready now to release our new image OpenPLi 4.0 IPTV for DM800HD, DM800HDse, DM500HD and DM8000HD boxes with Japhar Sim.
- Japhar v21, links to MEGA for Download
DM500HD+ :
Here is the long waited OpenPLi 4.0 IPTV built by our Japhar Admin with GStreamer 1.11 and ExtePlayer3 (by Default)
Du musst angemeldet sein, um Bilder zu sehen.
- OpenPLi 4.0 from Japhar Team with IPTV (1300+ FREE FTA IPTV Channels)
We Thank MastaG for having handed us the sources last July of the v20 version for us to build all the newer versions. This image is a working much better than the v20, also if the v20 was the best and still the best compared with all other images around. We put a lot of work and efforts into it, wishing you all to enjoy that new release as soon as we would be happy with it.
This image is a MAJOR update, so you can reflash it or you can as well UPDATE IT ONLINE thru the Feeds that were updated today. Its few days we are working and testing it, we believe that now its time for all you to have it ! Enjoy ;o) it as well !
After few months work and improved software such as GStreamer to v1.11 and latest December 2016 ExtePlayer3, we are ready now to release our new image OpenPLi 4.0 IPTV for DM800HD, DM800HDse, DM500HD and DM8000HD boxes with Japhar Sim.
- Japhar v21, links to MEGA for Download
DM500HD+ :
PHP:
https://mega.nz/#!ZM0ygQoR!T7J1Nnvhdi7WL3gD928wkpqtXtKiHXE3Bt2Ph8RsRbk
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenPLi 4.0 IPTV v21a ExtePlayer3+GStreamer 1.11, 1300 IPTV FREE FTA Channels
Winter version of OpenPLi 4.0 IPTV built by Japhar with ExtePlayer3 (and GStreamer 1.11 from Feeds)
Build of January 15th 2017, Feeds have been updated, so you can do an online update if you want.
- v21a for Japhar, links to MEGA for Download
DM500HD :
Du musst angemeldet sein, um Bilder zu sehen.
Winter version of OpenPLi 4.0 IPTV built by Japhar with ExtePlayer3 (and GStreamer 1.11 from Feeds)
Build of January 15th 2017, Feeds have been updated, so you can do an online update if you want.
- v21a for Japhar, links to MEGA for Download
DM500HD :
PHP:
https://mega.nz/#!IJ1UxZzQ!IH4arhko4phO9ELIOqDapR5jtE8DWPK2RAcGuDtdBHI
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenBlackHole IPTV v21 by Japhar ExtePlayer3/GSTreamer 1.11.1 and 1300 FTA IPTV FREE
OpenBlackHole IPTV v21 Final by Japhar with ExtePlayer3/GStreamer 1.11.1 including 1300 FTA FREE IPTV Channels
News :
- January 2017 Build of Enigma2/packages
- Lot of Fixes ;o)
- DTS audio on your DM800HDse, DM8000 and DM500HD, as well as DM800HD (but low CPU, could be unstable)
- Fast and reliable Skin
- etc...
DM500HD+ :
OpenBlackHole IPTV v21 Final by Japhar with ExtePlayer3/GStreamer 1.11.1 including 1300 FTA FREE IPTV Channels
Du musst angemeldet sein, um Bilder zu sehen.
News :
- January 2017 Build of Enigma2/packages
- Lot of Fixes ;o)
- DTS audio on your DM800HDse, DM8000 and DM500HD, as well as DM800HD (but low CPU, could be unstable)
- Fast and reliable Skin
- etc...
DM500HD+ :
PHP:
https://mega.nz/#!5JEHwY6D!ztLMjVWudvVlXqmG7ibUzSDIM-tDgrSr9mXz66DnNms
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
DE-OpenBlackHole 1.5 IPTV Japhar ExtePlayer3/GStreamer 1.11.1/ 1300 IPTV FREE FTA Ch
- Compatible Wifi dongles (Built-in) :
Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
Realtek 8712u, 8188cu / 8192cu
ZyDAS zd1201, zd1211rw
- DVB-T Installable from Feeds :
Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)
and the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867
DM500HD Japhar :
Du musst angemeldet sein, um Bilder zu sehen.
- Compatible Wifi dongles (Built-in) :
Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
Realtek 8712u, 8188cu / 8192cu
ZyDAS zd1201, zd1211rw
- DVB-T Installable from Feeds :
Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)
and the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867
DM500HD Japhar :
PHP:
https://mega.nz/#!FV1SnZxQ!dI65jxqE-7-3XE1oJHCYWUKtcvRo1EVfMGbnVZW296A
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
OpenPLi 4.0 IPTV Japhar ExtePlayer3/GStreamer 1.11.1/ 1300 IPTV FREE FTA Ch
- Compatible Wifi dongles (Built-in) :
Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
Realtek 8712u, 8188cu / 8192cu
ZyDAS zd1201, zd1211rw
- DVB-T Installable from Feeds :
Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)
and the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867
DM500HD Japhar :
Du musst angemeldet sein, um Bilder zu sehen.
- Compatible Wifi dongles (Built-in) :
Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
Realtek 8712u, 8188cu / 8192cu
ZyDAS zd1201, zd1211rw
- DVB-T Installable from Feeds :
Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)
and the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867
DM500HD Japhar :
PHP:
https://mega.nz/#!JAthFCQJ!DcES6FIC5KJX6VGtddHe4Jvwz-3ww5SHWLHsXqBEE-8
OP
OP
toysoft
Meister
- Registriert
- 24. April 2010
- Beiträge
- 962
- Reaktionspunkte
- 168
- Punkte
- 103
DM500HD : OpenPLi 6.0++ IPTV Daily Build by Japhar
- OpenPLi 6 (Enigma2 2017-10-25)
- Python 2.7.12, GStreamer 1.12.3 Stable
- Feeds online (For Wifi/DVB-T Dongles)
- Triple/Trial Tuner supported
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in 1300 FTA FREE IPTV Channels
- JAM 5.3 built-in (Plugins/Addons)
- Support by Japhar Team
MEGA (SSL84J) :
- OpenPLi 6 (Enigma2 2017-10-25)
- Python 2.7.12, GStreamer 1.12.3 Stable
- Feeds online (For Wifi/DVB-T Dongles)
- Triple/Trial Tuner supported
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in 1300 FTA FREE IPTV Channels
- JAM 5.3 built-in (Plugins/Addons)
- Support by Japhar Team
MEGA (SSL84J) :
Code:
https://mega.nz/#!VupFTBzB!DISq53YWFLuh9kr7HiwRtrbP4xs9gooHI_onEb45AQ0Ähnliche Themen
