DM 800 Oscam liest Karte im Smargo nicht

[mxer]

AW: DM 800 Oscam liest Karte im Smargo nicht

Grenze es auf Dein Netz ein.
httpallowed = 192.168.178.1-192.168.178.100
habe ich bei mir.

Also das mit den Log hast Du jetzt, nun ist aber eines kurz nach dem Start von oscam interessanter s.o. Beispiel von mir.
Wenn im Webif so ähnliche Zeilen auftauchen, die kopieren und hier posten.

 

[timpi]

AW: DM 800 Oscam liest Karte im Smargo nicht

So, mal ein Script nach dem Start.

2012/01/15 21:14:15 2AAC6C20 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/01/15 21:14:15 2AAC6C20 s 0 lengths for caid guessing loaded
2012/01/15 21:14:15 2AAC6C20 s monitor: initialized (fd=7, port=5000)
2012/01/15 21:14:15 2AAC6C20 s camd33: disabled
2012/01/15 21:14:15 2AAC6C20 s camd35: disabled
2012/01/15 21:14:15 2AAC6C20 s cs378x: disabled
2012/01/15 21:14:15 2AAC6C20 s newcamd: initialized (fd=8, port=15000, crypted)
2012/01/15 21:14:15 2AAC6C20 s CAID: 1833
2012/01/15 21:14:15 2AAC6C20 s provid #0: 000000
2012/01/15 21:14:15 2AAC6C20 s newcamd: initialized (fd=9, port=15001, crypted)
2012/01/15 21:14:15 2AAC6C20 s CAID: 1702
2012/01/15 21:14:15 2AAC6C20 s provid #0: 000000
2012/01/15 21:14:15 2AAC6C20 s cccam: initialized (fd=10, port=25000, crypted)
2012/01/15 21:14:15 2AAC6C20 s radegast: disabled
2012/01/15 21:14:15 2AAC6C20 s http thread started
2012/01/15 21:14:15 2AAC6C20 s creating thread for device /dev/ttyUSB0
2012/01/15 21:14:15 2AAC6C20 s creating thread for device /dev/sci0
2012/01/15 21:14:15 2AAC6C20 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/01/15 21:14:15 2AAC6C20 s waiting for local card init
2012/01/15 21:14:15 2B19F4B0 h HTTP Server listening on port 83
2012/01/15 21:14:15 2B29F4B0 r reader thread started (thread=2B29F4B0, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2012/01/15 21:14:15 2B39F4B0 r reader thread started (thread=2B39F4B0, label=hdplus, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2012/01/15 21:14:16 2B39F4B0 r hdplus card detected
2012/01/15 21:14:17 2B39F4B0 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/01/15 21:14:18 2B29F4B0 r sky card detected
2012/01/15 21:14:18 2B39F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/01/15 21:14:19 2B39F4B0 r detect native nagra card
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] type: NAGRA, caid: 1830, IRD ID: FF FF FF FF
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] ProviderID: 00 00 34 11
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] active to: 2012/03/07 11:59
2012/01/15 21:14:20 2B39F4B0 r -----------------------------------------
2012/01/15 21:14:20 2B39F4B0 r |id |tier |valid from |valid to |
2012/01/15 21:14:20 2B39F4B0 r +----+--------+------------+------------+
2012/01/15 21:14:20 2B39F4B0 r |8011|0064 |2011/12/05 |2012/12/05 |
2012/01/15 21:14:20 2B39F4B0 r |8011|0065 |1992/01/01 |1993/01/01 |
2012/01/15 21:14:20 2B39F4B0 r -----------------------------------------
2012/01/15 21:14:20 2B39F4B0 r found cardsystem nagra
2012/01/15 21:14:20 2B39F4B0 r ROM: D N A S P 1 4 2
2012/01/15 21:14:20 2B39F4B0 r REV: R e v G C 6
2012/01/15 21:14:20 2B39F4B0 r SER: XXXXXX
2012/01/15 21:14:20 2B39F4B0 r CAID: 1830
2012/01/15 21:14:20 2B39F4B0 r Prv.ID: 00 00 34 11 (sysid)
2012/01/15 21:14:20 2B39F4B0 r Prv.ID: 00 00 00 00
2012/01/15 21:14:20 2B39F4B0 r Prv.ID: 00 00 80 11
2012/01/15 21:14:20 2B39F4B0 r [nagra-reader] ready for requests
2012/01/15 21:14:23 2B29F4B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/01/15 21:14:24 2B29F4B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/01/15 21:14:25 2B29F4B0 r detect irdeto tunneled nagra card
2012/01/15 21:14:25 2B29F4B0 r no rsa key configured -> using irdeto mode
2012/01/15 21:14:25 2B29F4B0 r detect irdeto card
2012/01/15 21:14:29 2B29F4B0 r card system not supported
2012/01/15 21:14:29 2B29F4B0 r Normal mode failed, reverting to Deprecated Mode


Switch Debug from 0 to 0 1 2 4 8 16 32 64 128

 

[mxer]

AW: DM 800 Oscam liest Karte im Smargo nicht

Schon besser, aber immer noch zu spät.
Macht nix, neuer Versuch: es geht um den Teil, wo die Karten intialisiert werden.

 

[timpi]

AW: DM 800 Oscam liest Karte im Smargo nicht

2012/01/15 21:26:30 2AAC6C20 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/01/15 21:26:30 2AAC6C20 s can't open file "/var/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/01/15 21:26:30 2AAC6C20 s 0 lengths for caid guessing loaded
2012/01/15 21:26:30 2AAC6C20 s monitor: initialized (fd=7, port=5000)
2012/01/15 21:26:30 2AAC6C20 s camd33: disabled
2012/01/15 21:26:30 2AAC6C20 s camd35: disabled
2012/01/15 21:26:30 2AAC6C20 s cs378x: disabled
2012/01/15 21:26:30 2AAC6C20 s newcamd: initialized (fd=8, port=15000, crypted)
2012/01/15 21:26:30 2AAC6C20 s CAID: 1833
2012/01/15 21:26:30 2AAC6C20 s provid #0: 000000
2012/01/15 21:26:30 2AAC6C20 s newcamd: initialized (fd=9, port=15001, crypted)
2012/01/15 21:26:30 2AAC6C20 s CAID: 1702
2012/01/15 21:26:30 2AAC6C20 s provid #0: 000000
2012/01/15 21:26:30 2AAC6C20 s cccam: initialized (fd=10, port=25000, crypted)
2012/01/15 21:26:30 2AAC6C20 s radegast: disabled
2012/01/15 21:26:30 2AAC6C20 s http thread started
2012/01/15 21:26:30 2AAC6C20 s creating thread for device /dev/ttyUSB0
2012/01/15 21:26:30 2AAC6C20 s creating thread for device /dev/sci0
2012/01/15 21:26:30 2AAC6C20 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/01/15 21:26:30 2AAC6C20 s waiting for local card init
2012/01/15 21:26:30 2B19F4B0 h HTTP Server listening on port 83
2012/01/15 21:26:30 2B29F4B0 r reader thread started (thread=2B29F4B0, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2012/01/15 21:26:30 2B39F4B0 r reader thread started (thread=2B39F4B0, label=hdplus, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2012/01/15 21:26:30 2B39F4B0 r hdplus card detected
2012/01/15 21:26:32 2B39F4B0 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/01/15 21:26:33 2B29F4B0 r sky card detected
2012/01/15 21:26:33 2B39F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/01/15 21:26:34 2B39F4B0 r detect native nagra card
2012/01/15 21:26:34 2B39F4B0 r [nagra-reader] type: NAGRA, caid: 1830, IRD ID: FF FF FF FF
2012/01/15 21:26:34 2B39F4B0 r [nagra-reader] ProviderID: 00 00 34 11
2012/01/15 21:26:34 2B39F4B0 r [nagra-reader] active to: 2012/03/07 11:59
2012/01/15 21:26:34 2B39F4B0 r -----------------------------------------
2012/01/15 21:26:34 2B39F4B0 r |id |tier |valid from |valid to |
2012/01/15 21:26:34 2B39F4B0 r +----+--------+------------+------------+
2012/01/15 21:26:34 2B39F4B0 r |8011|0064 |2011/12/05 |2012/12/05 |
2012/01/15 21:26:34 2B39F4B0 r |8011|0065 |1992/01/01 |1993/01/01 |
2012/01/15 21:26:35 2B39F4B0 r -----------------------------------------
2012/01/15 21:26:35 2B39F4B0 r found cardsystem nagra
2012/01/15 21:26:35 2B39F4B0 r ROM: D N A S P 1 4 2
2012/01/15 21:26:35 2B39F4B0 r REV: R e v G C 6
2012/01/15 21:26:35 2B39F4B0 r SER: 48
2012/01/15 21:26:35 2B39F4B0 r CAID: 1830
2012/01/15 21:26:35 2B39F4B0 r Prv.ID: 00 00 34 11 (sysid)
2012/01/15 21:26:35 2B39F4B0 r Prv.ID: 00 00 00 00
2012/01/15 21:26:35 2B39F4B0 r Prv.ID: 00 00 80 11
2012/01/15 21:26:35 2B39F4B0 r [nagra-reader] ready for requests
2012/01/15 21:26:37 2B29F4B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/01/15 21:26:38 2B29F4B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/01/15 21:26:39 2B29F4B0 r detect irdeto tunneled nagra card
2012/01/15 21:26:39 2B29F4B0 r no rsa key configured -> using irdeto mode
2012/01/15 21:26:39 2B29F4B0 r detect irdeto card


Switch Debug from 0 to 0 1 2 4 8 16 32 64 128 255

 

[mxer]

AW: DM 800 Oscam liest Karte im Smargo nicht

Nimm mal in der oscam.server bei der S02 den Boxkey raus, mach einfach # davor.

 

[timpi]

AW: DM 800 Oscam liest Karte im Smargo nicht

Nix neues, totz # vor Boxkey

2012/01/15 21:54:23 2AAC6C20 s cs378x: disabled
2012/01/15 21:54:23 2AAC6C20 s newcamd: initialized (fd=8, port=15000, crypted)
2012/01/15 21:54:23 2AAC6C20 s CAID: 1833
2012/01/15 21:54:23 2AAC6C20 s provid #0: 000000
2012/01/15 21:54:23 2AAC6C20 s newcamd: initialized (fd=9, port=15001, crypted)
2012/01/15 21:54:23 2AAC6C20 s CAID: 1702
2012/01/15 21:54:23 2AAC6C20 s provid #0: 000000
2012/01/15 21:54:23 2AAC6C20 s cccam: initialized (fd=10, port=25000, crypted)
2012/01/15 21:54:23 2AAC6C20 s radegast: disabled
2012/01/15 21:54:23 2AAC6C20 s http thread started
2012/01/15 21:54:23 2AAC6C20 s creating thread for device /dev/ttyUSB0
2012/01/15 21:54:23 2AAC6C20 s creating thread for device /dev/sci0
2012/01/15 21:54:23 2AAC6C20 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/01/15 21:54:23 2AAC6C20 s waiting for local card init
2012/01/15 21:54:23 2B19F4B0 h HTTP Server listening on port 83
2012/01/15 21:54:23 2B29F4B0 r reader thread started (thread=2B29F4B0, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2012/01/15 21:54:23 2B39F4B0 r reader thread started (thread=2B39F4B0, label=hdplus, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2012/01/15 21:54:23 2B39F4B0 r hdplus card detected
2012/01/15 21:54:25 2B39F4B0 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/01/15 21:54:25 2B29F4B0 r sky card detected
2012/01/15 21:54:26 2B39F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/01/15 21:54:27 2B39F4B0 r detect native nagra card
2012/01/15 21:54:27 2B39F4B0 r [nagra-reader] type: NAGRA, caid: 1830, IRD ID: FF FF FF FF
2012/01/15 21:54:27 2B39F4B0 r [nagra-reader] ProviderID: 00 00 34 11
2012/01/15 21:54:27 2B39F4B0 r [nagra-reader] active to: 2012/03/07 11:59
2012/01/15 21:54:27 2B39F4B0 r -----------------------------------------
2012/01/15 21:54:27 2B39F4B0 r |id |tier |valid from |valid to |
2012/01/15 21:54:27 2B39F4B0 r +----+--------+------------+------------+
2012/01/15 21:54:27 2B39F4B0 r |8011|0064 |2011/12/05 |2012/12/05 |
2012/01/15 21:54:27 2B39F4B0 r |8011|0065 |1992/01/01 |1993/01/01 |
2012/01/15 21:54:27 2B39F4B0 r -----------------------------------------
2012/01/15 21:54:28 2B39F4B0 r found cardsystem nagra
2012/01/15 21:54:28 2B39F4B0 r ROM: D N A S P 1 4 2
2012/01/15 21:54:28 2B39F4B0 r REV: R e v G C 6
2012/01/15 21:54:28 2B39F4B0 r SER: 48
2012/01/15 21:54:28 2B39F4B0 r CAID: 1830
2012/01/15 21:54:28 2B39F4B0 r Prv.ID: 00 00 34 11 (sysid)
2012/01/15 21:54:28 2B39F4B0 r Prv.ID: 00 00 00 00
2012/01/15 21:54:28 2B39F4B0 r Prv.ID: 00 00 80 11
2012/01/15 21:54:28 2B39F4B0 r [nagra-reader] ready for requests
2012/01/15 21:54:30 2B29F4B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/01/15 21:54:31 2B29F4B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/01/15 21:54:32 2B29F4B0 r detect irdeto tunneled nagra card
2012/01/15 21:54:32 2B29F4B0 r no rsa key configured -> using irdeto mode
2012/01/15 21:54:32 2B29F4B0 r detect irdeto card
2012/01/15 21:54:37 2B29F4B0 r card system not supported
2012/01/15 21:54:37 2B29F4B0 r Normal mode failed, reverting to Deprecated Mode
2012/01/15 21:54:41 2B29F4B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2012/01/15 21:54:42 2B29F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2012/01/15 21:54:43 2B29F4B0 r detect irdeto tunneled nagra card
2012/01/15 21:54:43 2B29F4B0 r no rsa key configured -> using irdeto mode
2012/01/15 21:54:43 2B29F4B0 r detect irdeto card

 

[mxer]

AW: DM 800 Oscam liest Karte im Smargo nicht

Auf was steht der Smargo?

 

[timpi]

AW: DM 800 Oscam liest Karte im Smargo nicht

Mode Fixed
Frequenz 6,00
Kernel Normal (hab ich gelesen, wenn Image OE 1.6 ist)
T-Mode 0

 

[mxer]

AW: DM 800 Oscam liest Karte im Smargo nicht

An der Dream hatte ich den auf: auto, dreambox,0 ,0

 

[timpi]

AW: DM 800 Oscam liest Karte im Smargo nicht

naja, das kann ich ja morgen nochmal probieren.

Danke Dir erstmal für Deine Zeit.

Ich melde mich wenn es funzt, oder immer noch keine Änderung.

 

[mxer]

AW: DM 800 Oscam liest Karte im Smargo nicht

OK, kein Problem.
Wird schon noch werden, bin da ganz zuversichtlich :ja