Diabolo Wifi HW 2.6 + UW 2.28/2.30

[syrinx]

Servus,

hab leider auch das Problem das ganze zum Laufen zu bekommen:

TV: Samsung LE40B650T2 (kompatibel laut Liste/ Cam wird erkannt)

CCCAM.CFG ist nach bekanntem Schema aufgebaut und connected sich auch (sehe ich im Status).

Config.xml:

Spoiler

<config LANG="ENGLISH" ENABLE_ADMIN_PIN="N" ADMIN_PIN="0000" SMART_MESSAGES="Show Never" MULTIMEDIA_MESSAGES="Show Normal" DELAYER="5" BASE_IP="0001" LEDS="Y" AUTO_PMT="N" CAIDS_FILE="GERMAN" STREAM_SPEED="MID" WIFI_ENCRYPT="none" WIFI_TXPOWER="17" WIFI_WEP_KEYIDX="1" WIFI_WEP64_Key1="0000000000" WIFI_WEP64_Key2="0000000000" WIFI_WEP64_Key3="0000000000" WIFI_WEP64_Key4="0000000000" WIFI_WEP128_Key1="00000000000000000000000000" WIFI_WEP128_Key2="00000000000000000000000000" WIFI_WEP128_Key3="00000000000000000000000000" WIFI_WEP128_Key4="00000000000000000000000000" WIFI_WPA_PSK="" WIFI_WPA_PMKPSK="" WIFI_WPA_PMKAP="" WIFI_WPA_PMK="0000000000000000000000000000000000000000000000000000000000000000" EMU_PRIORITY="1:Emu - 2:Cards" SHARE_CLIENT="CCCAM" SMARTCARD_EMMS="N" WIFI_ENABLED="Y" WIFI_DOMAIN="ETSI" WIFI_IP="0.0.0.0" WIFI_NETMASK="0.0.0.0" WIFI_GATEWAY="0.0.0.0" WIFI_DNS="0.0.0.0" WIFI_DHCP="Y" WIFI_AP="FREE z3 " EMULATORS="Y" FIXED_CW="N" CAS_Conax="N" CAS_Seca="N" CAS_Irdeto="N" CAS_Via="N" CAS_Cryptoworks="Y" CAS_Dreamcrypt="N" CAS_Nagra="Y" CAS_DGCrypt="N" SHARE_LOG="Y" />

German.xml:

Spoiler

<caid value="1702"></caid>
<caid value="1722"></caid>
<caid value="1833"></caid>
<caid value="1834"></caid>
<caid value="0963"></caid>
<caid value="09C4"></caid>
<caid value="09C7"></caid>
<caid value="098C"></caid>
<caid value="09AF"></caid>
<caid value="1918"></caid>
<caid value="1830"></caid>
<caid value="1843"></caid>
<caid value="0500"></caid>
<caid value="0B00"></caid>
<caid value="0D00"></caid>
<caid value="0D05"></caid>
<caid value="0D22"></caid>
<caid value="0D95"></caid>
<caid value="0648"></caid>
<caid value="1800"></caid>
<caid value="1801"></caid>

Hab die CAIDS auch schon auf 3 reduziert. Macht aber kein Unterschied.

Mit dem UW 2.28 geht es bei 2 Kanälen, aber nur paar Sekunden/paar wenige Minuten
Mit dem UW 2.30 hatte ich bis dato kein Glück bei gleichen Settings (Delayer von 0-7 durchprobiert).
Jedoch reagiert mit der UW 2.30 alles schneller (CI Menü und das Umschalten).

Kaltstartproblem gibt es auch. Dauerhaft lösbar?

Gibt's noch rigendwas, das zum Laufen zu bekommen?
Ich weiß nicht mehr was.

vielen Dank und cheers,

 

[pehedima]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Welche Pakete möchtest du denn entschlüsseln?
An welchem Server verbindest sich das Diablo?
Handelt es sich um einen lokalen Server?
Wie weit ist das Diablo vom Router entfernt?

Wie äußert sich das Problem genau (Problembeschreibung).

Das Kaltstartproblem wirst du du wohl eher nicht gelöst bekommen.

 

[syrinx]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Hi,

- Komplett Sky ausser Select und Österreicher Angebot.
Bin im Kabelnetz (1:1 Einspeisung wie Astra 19.2E).
- Oscam 1.20 Rev 10997
- Kein lokaler, sondern übers Inet.
- Entfernung ca. 1,5-2m Entfernung (Sichtkontakt)

Problembeschreibung:
Diabolo läuft und ist connected zum Server.
Schalte auf ein Sky channel.
Kanalnummer und Sender werden angezeigt.
Paar Sekunden später schaltet sich die Info der Tonspur dazu (z.B. DolbyDigital).
Ca. 5 Sekunden später kommt die Meldung: Sender ist verschlüsselt.
Auch beim gemütlich zappen ändert sich das Bild nicht.

Mit der 2.28 wurde nur bis dato Sky Action HD und Sky SportNews für paar Sekunden hell.


Thansk and cheers,

 

[pehedima]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Okay
Delayer auf 0 stellen.
TX runterdrehen auf 1-3.

Prüfe deine Ping Zeiten zum Server.


Gesendet von meiner Handquetsche

 

[syrinx]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Hi,

delayer ist nun auf 0
TX = 3

Jetzt ist es mit UW 2.30 hell, manchmal aber nur bis max 10 sec.
ping zum server über router zwischen 60-100.

Cheers

 

[pehedima]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Poste die oscam.log vom Server.

 

[Buchi-88]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Hast du im Oscam den rec_timout Eintrag = 4000 drin?

Für den Kaltstart "könnte" es auch eine Lösung geben, aber vorher sollte das Modul einmal laufen , deine CAID Liste sollte auch einmal angepasst werden

 

[syrinx]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Hi,

oscam log kommt am Donnerstag.
Eintrag zum rec_timeout muss ich checken. Danke für den Hinweis!

German.xml sieht nun wie folgt aus:

Spoiler

<caid value="1702"></caid>
<caid value="1833"></caid>
<caid value="09C4"></caid>
<caid value="098C"></caid>

Hast du mir weitere infos zum Kaltstartproblem?

Thanks&Cheers

 

[marlom]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Das sind Syrinx seine Server Daten:

Server Gigablue 800HD

oscam.server

Spoiler

[reader]label = v14
description = V14-Sky
enable = 1
protocol = internal
device = /dev/sci0
#services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
fix07 = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

oscam.conf

Spoiler

[global]logfile = /var/log/oscam.log
maxlogsize = 256
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500
ecmfmt = c/s/l
# kein emmlogdir >>> emm logs im oscam config ordner


[cache]
delay = 80


[cccam]
port = XXXXX
version = 2.2.1
reshare = 1
ignorereshare = 0


[newcamd]
key = 0102030405060708091011121314
port = XXXXX@098C:000000
keepalive = 1
mgclient = 0


[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox


[webif]
httpport = XXXX
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-254.254.254.254
httpdyndns =


[cs357x]
port = XXXXX

oscam.dvbapi

Spoiler

P:098C
I:0

 

[Buchi-88]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Veruche beim Oscam diese Einstellungen bei CCcam:

[cccam]
port = xxx
version = 2.1.1
stealth = 1
recv_timeout = 4000
xxx

Und in die Caid Liste nur 098C

 

[marlom]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Danke Buchi-88 cccam ist angepasst. Müssen jetzt abwarten was syrinx berichtet sobald er wieder at home ist.

 

[syrinx]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

Hi,

hab grad kein Inet.
Nächste Woche wieder.

cheers
Michael

Gesendet von meinem D5803 mit Tapatalk

 

[marlom]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

So lange Zeit ist verstrichen, hier der Log zu unserem Problem.

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Nov 28 20:56:19 2015
-------------------------------------------------------------------------------
2015/11/28 20:56:19 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10997 (mipsel-openpli40-linux-gnu-libusb)
2015/11/28 20:56:19 00000000 s (main) System name = Linux
2015/11/28 20:56:19 00000000 s (main) Host name = gb800se
2015/11/28 20:56:19 00000000 s (main) Release = 3.9.6
2015/11/28 20:56:19 00000000 s (main) Version = #1 Fri Aug 7 06:17:17 CEST 2015
2015/11/28 20:56:19 00000000 s (main) Machine = mips
2015/11/28 20:56:19 00000000 s (main) Stb model = gb800se
2015/11/28 20:56:19 00000000 s (main) Stb vumodel = vuultimo
2015/11/28 20:56:19 00000000 s (main) Stb boxtype = gigablue
2015/11/28 20:56:19 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 30744
2015/11/28 20:56:19 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/11/28 20:56:19 00000000 s (config) userdb reloaded: 13 accounts loaded, 0 expired, 1 disabled
2015/11/28 20:56:19 00000000 s (main) signal handling initialized
2015/11/28 20:56:19 00000000 s (config) 194 service-id's loaded in 12 ms
2015/11/28 20:56:19 00000000 s (net) cs357x: initialized (fd=5, port=xxxxx)
2015/11/28 20:56:19 00000000 s (net) newcamd: initialized (fd=6, port=xxxxx)
2015/11/28 20:56:19 00000000 s (net) -> CAID: 098C PROVID: 000000
2015/11/28 20:56:19 00000000 s (net) cccam: initialized (fd=7, port=xxxxx)
2015/11/28 20:56:19 00000000 s (reader) v14 [internal] creating thread for device /dev/sci0
2015/11/28 20:56:19 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/11/28 20:56:19 00000000 s (main) waiting for local card init
2015/11/28 20:56:19 24F43708 r (reader) v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/11/28 20:56:19 24F43708 r (reader) v14 [internal] Reader sci internal, detected box type: gigablue
2015/11/28 20:56:19 03C5E23D h (webif) webif: decompressed 164060 bytes back into 392536 bytes
2015/11/28 20:56:19 03C5E23D h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxx
2015/11/28 20:56:20 24F43708 r (reader) v14 [internal] card detected
2015/11/28 20:56:20 24F43708 r (reader) v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/11/28 20:56:20 24F43708 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/11/28 20:56:20 24F43708 r (reader) v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/11/28 20:56:22 24F43708 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 2518687
2015/11/28 20:56:23 24F43708 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Card type: P1TV
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Rom version: 20AA
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Credit available on card: 0 euro
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Extended 4C detected
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] FuseByte: 05
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Region Code: xxxxxxxx
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Country Code: DEU
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] Pincode read: xxxxx
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] PCB settings: FF FF FF FF
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] ready for requests
2015/11/28 20:56:24 24F43708 r (reader) v14 [internal] found card system videoguard2
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] card detected
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] ------------------------------------------------------------------
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0046 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0058 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0056 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0057 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0068 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0069 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 006a --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 006b --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 006c --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0065 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 006d --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0066 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 006e --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0067 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 006f --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0070 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0071 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0072 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0073 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 007b --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0075 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 007d --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 0081 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 008e --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00ca --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00f0 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00fa --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/12/15-00:00:00 |
2015/11/28 20:56:24 24F43708 r (reader) v14 [videoguard2] |-- 00 ---|-- 00ff --| 2015/12/15-00:00:00 |
2015/11/28 20:56:25 24F43708 r (reader) v14 [videoguard2] ------------------------------------------------------from-ins70--
2015/11/28 20:56:25 00000000 s (main) init for all local cards done
2015/11/28 20:56:25 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/11/28 20:56:25 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2015/11/28 20:56:25 00000000 s (anticasc) anti cascading disabled
2015/11/28 20:56:25 6023B20E c (newcamd) client connected to xxxxx port
2015/11/28 20:56:25 21058BE2 c (client) plain dvbapi-client granted (serverbox, au=auto (1 reader))
2015/11/28 20:56:25 6838C4DD c (newcamd) client connected to xxxxxx port
2015/11/28 20:56:25 1BFEA59B c (client) encrypted cccam-client xxx.xxx.xxx.xxx granted (oben, au=off)
2015/11/28 20:56:25 21058BE2 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2015/11/28 20:56:25 21058BE2 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/11/28 20:56:25 041D98ED c (client) encrypted cccam-client xxx.xxx.xxx.xxx granted (user_1, au=off)
2015/11/28 20:56:25 104FFFC3 c (client) encrypted cccam-client xxx.xxx.xxx.xxx granted (user_2, au=off)
2015/11/28 20:56:25 6838C4DD c (client) encrypted newcamd:xxxxx-client xxx.xxx.xxx.xxx granted (user_4, au=off)
2015/11/28 20:56:25 6838C4DD c (newcamd) user user_4 authenticated successfully (mgcamd)
2015/11/28 20:56:25 6838C4DD c (newcamd) AU disabled for user user_4
2015/11/28 20:56:25 6023B20E c (client) encrypted newcamd:xxxxx-client xxx.xxx.xxx.xxx granted (user_2, au=off)
2015/11/28 20:56:25 6023B20E c (newcamd) user user_2 authenticated successfully (mgcamd)
2015/11/28 20:56:25 6023B20E c (newcamd) AU disabled for user user_2
2015/11/28 20:56:25 6838C4DD c (newcamd) SID list will not be send to mgcamd client.
2015/11/28 20:56:26 6838C4DD c (-) -- Skipped 1 duplicated log lines --
2015/11/28 20:56:26 6838C4DD c (ecm) roland (098C/0065/98): found (98 ms) by v14 - Sky Universal HD
2015/11/28 20:56:27 0265C7EA c (newcamd) client connected to xxxxx port
2015/11/28 20:56:27 0265C7EA c (client) encrypted newcamd:xxxxx-client xxx.xxx.xxx.xxx granted (user_3, au=off)
2015/11/28 20:56:27 0265C7EA c (newcamd) user user_3 authenticated successfully (mgcamd)
2015/11/28 20:56:27 0265C7EA c (newcamd) AU disabled for user user_3
2015/11/28 20:56:27 0265C7EA c (newcamd) SID list will not be send to mgcamd client.
2015/11/28 20:56:27 041D98ED c (ecm) user_1 (098C/EF10/98): found (78 ms) by v14 - RTL HD
2015/11/28 20:56:27 104FFFC3 c (ecm) user_2(098C/EF75/98): found (78 ms) by v14 - ProSieben HD
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CEC PROVID: 000000
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19EC PROVID: 000000
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 1BEC PROVID: 000000
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AEC PROVID: 000000
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: 1EEC PROVID: 000000
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1DEC PROVID: 000000
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in PMT
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 serving srvid EF75 (1830@000000:EF75 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 3
2015/11/28 20:56:30 21058BE2 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1AEC ANY CHID PMTPID 0061 VPID 01FF








2015/11/28 20:58:12 21058BE2 c (ecm) serverbox (098C/EF75/98): found (87 ms) by v14 - ProSieben HD
2015/11/28 20:58:15 6838C4DD c (ecm) user_1 (098C/0065/98): found (90 ms) by v14 - Sky Universal HD
2015/11/28 20:58:15 0089533E c (client) encrypted cccam-client xxx granted (user_5, au=off)
2015/11/28 20:58:16 104FFFC3 c (ecm) user_2 (098C/EF15/98): found (81 ms) by v14 - RTLII HD
2015/11/28 20:58:16 041D98ED c (ecm) user_3 (098C/EF10/98): found (117 ms) by v14 - RTL HD
2015/11/28 20:58:16 1BFEA59B c (ecm) user_4 (098C/007B/98): found (78 ms) by v14 - TNT Serie HD
2015/11/28 20:58:19 21058BE2 c (ecm) serverbox (098C/EF75/98): found (84 ms) by v14 - ProSieben HD

user_5 ist die diablo. connected allerdings kein bild. Configs sind wie zuvor beschrieben. jemand ne Idee?

pehedima

@marlom: Achte bitte in Zukunft darauf, das die geposteten Logfiles keine öffentlichen IP-Adressen enthalten.

 

[czutok]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

das kanst du entfernen <caid value="1702"></caid> , gibts nicht mehr

[cccam]
port = xxxxx
version = 2.2.1
nodeid = xxxxxxxxx
recv_timeout = 4000

 

[marlom]

AW: Diabolo Wifi HW 2.6 + UW 2.28/2.30

geht leider immer noch nicht... diablo sagt verschlüsselt