- Registriert
- 23. April 2009
- Beiträge
- 848
- Reaktionspunkte
- 189
- Punkte
- 113
Hi,
Habe hier einen kleinen Server mit Debian 5.0 nach Anleitung von hier:
Digital Eliteboard
aufgesetzt, alles Wunderbar bis die Smargos in Spiel kommen.
Smargo ist wie folgt Eingstellt:
Probiert wurde auch
cccam.cfg:
Fehlermeldung mit einem Smargo direkt am Server:
Fehlermeldung cccam
--------------
Fehlermeldung mit 7Port Dlink USB HUB 3 x Smargo:
sobald cccam läuft und eine abokarte im reader1 steckt gehts los:
USB HUB getrennt vom System und wiederverbunden:
Habe hier einen kleinen Server mit Debian 5.0 nach Anleitung von hier:
Digital Eliteboard
aufgesetzt, alles Wunderbar bis die Smargos in Spiel kommen.
Smargo ist wie folgt Eingstellt:
Code:
AUTO
NORMAL
0
0
Code:
AUTO
NORMAL
1
0
Code:
Debian Linux 5.0.4 / CCcam 2.1.3 server
SERVER LISTEN PORT : 12000
SERIAL READER : /dev/ttyUSB0 smartreader+ (MTV)
#SERIAL READER : /dev/ttyUSB1 smartreader+
#SERIAL READER : /dev/ttyUSB2 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3750000
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB1 3750000
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB2 3750000
DISABLE EMM : no
SHOW TIMING : yes
EXTRA EMM LEVEL : yes
CAID PRIO FILE : /var/keys/CCcam.prio
PROVIDERINFO FILE : /var/keys/CCcam.providers
CHANNELINFO FILE : /var/keys/CCcam.channelinfo
WEBINFO USERNAME : xxxx
WEBINFO PASSWORD : xxxxx
Code:
[ 776.705045] ftdi_sio: urb failed to clear flow control
[ 781.705637] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 782.705038] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 783.708023] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 788.708037] ftdi_sio: urb failed to clear flow control
[ 793.705639] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 798.706238] ftdi_sio: error from flowcontrol urb
[ 803.708039] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 811.121983] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 812.121374] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 817.121986] ftdi_sio: urb failed to clear flow control
[ 822.122571] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 823.121979] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 824.121387] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 829.121959] ftdi_sio: urb failed to clear flow control
[ 834.122614] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 839.123173] ftdi_sio: error from flowcontrol urb
[ 844.124037] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 850.124035] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 851.123188] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 856.123802] ftdi_sio: urb failed to clear flow control
[ 861.120774] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 862.123772] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 863.123192] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 868.123790] ftdi_sio: urb failed to clear flow control
[ 873.120784] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 878.121335] ftdi_sio: error from flowcontrol urb
[ 883.121969] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 890.124036] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 891.120769] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 896.121369] ftdi_sio: urb failed to clear flow control
[ 901.121971] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 902.121351] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 903.120763] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 908.121357] ftdi_sio: urb failed to clear flow control
[ 913.121995] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 918.122531] ftdi_sio: error from flowcontrol urb
[ 923.123187] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 930.124036] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 931.121950] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 936.122551] ftdi_sio: urb failed to clear flow control
[ 941.123182] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 942.122553] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 943.121969] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 948.122557] ftdi_sio: urb failed to clear flow control
[ 953.123197] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 958.123755] ftdi_sio: error from flowcontrol urb
[ 963.120768] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 970.124035] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 971.123174] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 976.123773] ftdi_sio: urb failed to clear flow control
[ 981.120775] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 982.123759] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 983.123171] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 988.123782] ftdi_sio: urb failed to clear flow control
[ 993.120767] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 998.121329] ftdi_sio: error from flowcontrol urb
[ 1003.121972] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1010.124037] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1011.120625] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1016.121340] ftdi_sio: urb failed to clear flow control
[ 1021.121971] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1022.121328] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1023.120616] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1028.121326] ftdi_sio: urb failed to clear flow control
[ 1033.121962] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1038.122552] ftdi_sio: error from flowcontrol urb
[ 1043.123188] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1050.124044] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1051.121962] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1056.122533] ftdi_sio: urb failed to clear flow control
[ 1061.124031] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1062.124039] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1063.121948] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1068.122551] ftdi_sio: urb failed to clear flow control
[ 1073.123149] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1077.160954] usb 1-1.2: USB disconnect, address 3
[ 1077.160954] ftdi_sio 1-1.2:1.0: device disconnected
[ 1078.122436] ftdi_sio: error from flowcontrol urb
[ 1083.124018] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1084.122260] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1090.123225] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1091.122287] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1096.122803] ftdi_sio: urb failed to clear flow control
[ 1101.121607] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1102.122428] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1103.122268] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1108.122432] ftdi_sio: urb failed to clear flow control
[ 1113.124036] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1118.121778] ftdi_sio: error from flowcontrol urb
[ 1123.125418] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1130.123168] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1131.121596] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1136.121740] ftdi_sio: urb failed to clear flow control
[ 1141.121934] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1142.121788] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1143.121599] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1148.121760] ftdi_sio: urb failed to clear flow control
[ 1153.121973] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1158.122093] ftdi_sio: error from flowcontrol urb
[ 1163.122275] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1170.122820] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1171.121921] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1176.122082] ftdi_sio: urb failed to clear flow control
[ 1181.122263] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1182.124054] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1183.121929] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1188.122089] ftdi_sio: urb failed to clear flow control
[ 1193.122282] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1198.122431] ftdi_sio: error from flowcontrol urb
[ 1203.124021] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1210.123067] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1211.122259] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1216.122565] ftdi_sio: urb failed to clear flow control
[ 1221.121636] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1222.122421] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1223.122272] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1228.122422] ftdi_sio: urb failed to clear flow control
[ 1233.124019] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1238.121762] ftdi_sio: error from flowcontrol urb
[ 1243.121943] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1250.122454] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1251.121980] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1256.121750] ftdi_sio: urb failed to clear flow control
[ 1261.122668] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1262.121761] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1263.124018] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1268.121760] ftdi_sio: urb failed to clear flow control
[ 1273.121953] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 1278.125579] ftdi_sio: error from flowcontrol urb
[ 1283.122268] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1290.125583] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1291.121921] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1296.122085] ftdi_sio: urb failed to clear flow control
[ 1301.122270] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 1302.122098] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 1303.121921] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 1308.122124] ftdi_sio: urb failed to clear flow control
[ 1309.888355] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -84
[ 1309.889152] ftdi_sio: error from flowcontrol urb
[ 1309.934095] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 1309.956962] usb 1-1.6: USB disconnect, address 4
[ 1309.956962] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 1309.957270] ftdi_sio 1-1.6:1.0: device disconnected
[ 1357.116646] usb 1-1: USB disconnect, address 2
[ 1410.481598] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1410.786653] usb 1-1: new full speed USB device using uhci_hcd and address 6
[ 1410.955511] usb 1-1: configuration #1 chosen from 1 choice
[ 1410.960053] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1410.960053] ftdi_sio: Detected FT232BM
[ 1410.960053] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1410.964056] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1410.964056] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 1410.964056] usb 1-1: SerialNumber: Reader C6C91AE
[ 1652.592442] usb 1-1: USB disconnect, address 6
[ 1652.593794] ftdi_sio 1-1:1.0: device disconnected
[ 1652.810017] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1697.069221] usb 1-1: new full speed USB device using uhci_hcd and address 7
[ 1697.131236] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1697.419378] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1697.723003] usb 1-1: new full speed USB device using uhci_hcd and address 9
[ 1697.887175] usb 1-1: configuration #1 chosen from 1 choice
[ 1697.892055] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1697.892055] ftdi_sio: Detected FT232BM
[ 1697.892055] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1697.896058] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1697.896058] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 1697.896058] usb 1-1: SerialNumber: Reader C6C91AE
[ 1847.524030] usb 1-1: USB disconnect, address 9
[ 1847.524030] ftdi_sio 1-1:1.0: device disconnected
[ 1848.038943] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1887.192761] usb 1-1: new full speed USB device using uhci_hcd and address 10
[ 1887.362102] usb 1-1: configuration #1 chosen from 1 choice
[ 1887.368054] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 1887.368054] ftdi_sio: Detected FT232BM
[ 1887.368054] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1887.372099] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1887.372099] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 1887.372099] usb 1-1: SerialNumber: Reader 118
[ 2485.872339] usb 1-1: USB disconnect, address 10
[ 2485.873682] ftdi_sio 1-1:1.0: device disconnected
[ 2486.082240] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 2494.344608] usb 1-1: new full speed USB device using uhci_hcd and address 11
[ 2494.515862] usb 1-1: configuration #1 chosen from 1 choice
[ 2494.520059] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 2494.520059] ftdi_sio: Detected FT232BM
[ 2494.520059] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 2494.524089] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 2494.524089] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 2494.524089] usb 1-1: SerialNumber: Reader C6C91AE
[ 2932.726401] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS LOW
[ 2937.728014] ftdi_sio: error from flowcontrol urb
[ 2942.725721] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 2950.728020] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 2951.726198] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 2956.728020] ftdi_sio: urb failed to clear flow control
[ 2961.725542] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 2962.726373] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 2963.726216] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 2968.726277] ftdi_sio: urb failed to clear flow control
[ 2973.728018] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 2978.725711] ftdi_sio: error from flowcontrol urb
[ 2983.725880] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 2990.725693] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 2991.725545] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 2996.723701] ftdi_sio: urb failed to clear flow control
[ 3001.726001] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 3002.729202] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3003.726010] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3008.725701] ftdi_sio: urb failed to clear flow control
[ 3013.725893] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 3018.726038] ftdi_sio: error from flowcontrol urb
[ 3023.726218] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 3030.725925] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3031.726036] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3036.726020] ftdi_sio: urb failed to clear flow control
[ 3041.726212] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 3042.726038] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3043.725874] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3048.726045] ftdi_sio: urb failed to clear flow control
[ 3053.726221] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 3058.726374] ftdi_sio: error from flowcontrol urb
[ 3063.728048] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 3070.726367] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3071.726291] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3076.726361] ftdi_sio: urb failed to clear flow control
[ 3081.725541] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 3082.726366] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3083.726211] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3088.726366] ftdi_sio: urb failed to clear flow control
[ 3093.729030] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 3098.725702] ftdi_sio: error from flowcontrol urb
[ 3103.725880] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 3110.725707] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3111.725536] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3116.725690] ftdi_sio: urb failed to clear flow control
[ 3121.725869] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 3122.725701] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 3123.728017] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 3128.725701] ftdi_sio: urb failed to clear flow control
[ 3133.725888] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 3138.726034] ftdi_sio: error from flowcontrol urb
Code:
card reader /dev/ttyUSB0
no or unknown card inserted
card reader /dev/ttyUSB1
no or unknown card inserted
card reader /dev/ttyUSB2
no or unknown card insertedFehlermeldung mit 7Port Dlink USB HUB 3 x Smargo:
Code:
ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 5.476026] ACPI: ACPI0007:00 is registered as cooling_device0
[ 5.496025] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 5.505455] ACPI: Thermal Zone [THM] (35 C)
[ 7.491303] ACPI: ACPI Dock Station Driver
[ 8.296058] SCSI subsystem initialized
[ 8.376041] usbcore: registered new interface driver usbfs
[ 8.376041] usbcore: registered new interface driver hub
[ 8.376041] usbcore: registered new device driver usb
[ 8.416033] USB Universal Host Controller Interface driver v3.0
[ 8.416725] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 8.416858] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 8.417838] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 8.418050] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
[ 8.419442] usb usb1: configuration #1 chosen from 1 choice
[ 8.419913] hub 1-0:1.0: USB hub found
[ 8.420029] hub 1-0:1.0: 2 ports detected
[ 8.524033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.524033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.524033] usb usb1: Product: UHCI Host Controller
[ 8.524033] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 8.524033] usb usb1: SerialNumber: 0000:00:07.2
[ 8.656047] Floppy drive(s): fd0 is 1.44M
[ 8.656047] libata version 3.00 loaded.
[ 8.672019] FDC 0 is a post-1991 82077
[ 8.724020] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8.728040] Uniform Multi-Platform E-IDE driver
[ 8.728040] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 8.744038] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
[ 8.744038] PIIX4: not 100% native mode: will probe irqs later
[ 8.744038] ide0: BM-DMA at 0x0860-0x0867
[ 8.744038] ide1: BM-DMA at 0x0868-0x086f
[ 8.744038] Probing IDE interface ide0...
[ 8.916039] Marking TSC unstable due to: TSC halts in idle.
[ 9.028022] hda: IBM-DARA-212000, ATA DISK drive
[ 9.075635] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 9.218919] usb 1-1: configuration #1 chosen from 1 choice
[ 9.220029] hub 1-1:1.0: USB hub found
[ 9.220029] hub 1-1:1.0: 7 ports detected
[ 9.334754] usb 1-1: New USB device found, idVendor=2001, idProduct=f103
[ 9.334816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.698108] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 9.699462] hda: UDMA/33 mode selected
[ 9.700021] Probing IDE interface ide1...
[ 10.424870] hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
[ 11.096789] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 11.097345] hdc: UDMA/33 mode selected
[ 11.098590] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 11.118191] ide1 at 0x170-0x177,0x376 on irq 15
[ 11.244043] hda: max request size: 128KiB
[ 11.268025] hda: 23579136 sectors (12072 MB) w/418KiB Cache, CHS=23392/16/63
[ 11.268025] hda: cache flushes not supported
[ 11.268025] hda: hda1 hda2 < hda5 >
[ 11.327283] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[ 11.327371] Uniform CD-ROM driver Revision: 3.20
[ 12.020020] usb 1-1.5: new full speed USB device using uhci_hcd and address 4
[ 12.060048] PM: Starting manual resume from disk
[ 12.179923] usb 1-1.5: configuration #1 chosen from 1 choice
[ 12.184035] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6001
[ 12.184035] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 12.184035] usb 1-1.5: SerialNumber: Reader C6C91AE
[ 12.208028] kjournald starting. Commit interval 5 seconds
[ 12.208028] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.388023] usb 1-1.6: new full speed USB device using uhci_hcd and address 5
[ 12.515319] usb 1-1.6: configuration #1 chosen from 1 choice
[ 12.520036] usb 1-1.6: New USB device found, idVendor=0403, idProduct=6001
[ 12.520036] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 12.520036] usb 1-1.6: SerialNumber: Reader 118
Code:
[ 575.516037] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS LOW
[ 580.516038] ftdi_sio: error from flowcontrol urb
[ 585.513684] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR LOW, RTS LOW
[ 593.516022] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 594.515488] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 599.516021] ftdi_sio: urb failed to clear flow control
[ 604.513060] ftdi_sio: update_mctrl Error from MODEM_CTRL urb: DTR HIGH, RTS HIGH
[ 605.516022] ftdi_sio: ftdi_set_termios FAILED to set databits/stopbits/parity
[ 606.515463] ftdi_sio: ftdi_set_termios urb failed to set baudrate
[ 611.516041] ftdi_sio: urb failed to clear flow control
[ 616.516037] ftdi_sio: ftdi_tiocmget Could not get modem status of device - err: -110
[ 621.513638] ftdi_sio: error from flowcontrol urb
.............. ohne zu stopen!USB HUB getrennt vom System und wiederverbunden:
Code:
[ 740.939165] usb 1-1: new full speed USB device using uhci_hcd and address 8
[ 741.084018] usb 1-1: configuration #1 chosen from 1 choice
[ 741.084018] hub 1-1:1.0: USB hub found
[ 741.084344] hub 1-1:1.0: 7 ports detected
[ 741.200021] usb 1-1: New USB device found, idVendor=2001, idProduct=f103
[ 741.200021] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 743.828110] usb 1-1.5: new full speed USB device using uhci_hcd and address 9
[ 743.955453] usb 1-1.5: configuration #1 chosen from 1 choice
[ 743.955453] ftdi_sio 1-1.5:1.0: FTDI USB Serial Device converter detected
[ 743.955453] ftdi_sio: Detected FT232BM
[ 743.955453] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB0
[ 743.960067] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6001
[ 743.960067] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 743.960067] usb 1-1.5: SerialNumber: Reader C6C91AE
[ 744.164029] usb 1-1.6: new full speed USB device using uhci_hcd and address 10
[ 744.289428] usb 1-1.6: configuration #1 chosen from 1 choice
[ 744.292047] ftdi_sio 1-1.6:1.0: FTDI USB Serial Device converter detected
[ 744.292047] ftdi_sio: Detected FT232BM
[ 744.292047] usb 1-1.6: FTDI USB Serial Device converter now attached to ttyUSB1
[ 744.296071] usb 1-1.6: New USB device found, idVendor=0403, idProduct=6001
[ 744.296071] usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 744.296071] usb 1-1.6: SerialNumber: Reader 118
