Debian server oscam+cccam v13 und hd+

[montecil67]

hallo an alle,
brauche wieder euer hilfe und zwar:
ich habe debian server mit ipc cccam + oscam mit folgende karten: sky it / srg/sct/freex mit cccam,sky de v13 mit oscam jetzt habe ich mir eine hd+ karte besorgt die schwarze hd02 und möchte sie zusammen mit der v13 mit oscam zum laufen bringen,wie soll ich das ganze einstellen?

 

[GTD Bastion]

AW: Debian server oscam+cccam v13 und hd+

Versuch es doch erst einmal mit der Suche ;-) Da wird dir in 99% aller Fälle sofort geholfen....alles weitere von mir dauert bis heute Abend.

 

[montecil67]

AW: Debian server oscam+cccam v13 und hd+

hallo an alle,
brauche wieder euer hilfe und zwar:
ich habe debian server mit ipc cccam + oscam mit folgende karten: sky it / srg/sct/freex mit cccam,sky de v13 mit oscam jetzt habe ich mir eine hd+ karte besorgt die schwarze hd02 und möchte sie zusammen mit der v13 mit oscam zum laufen bringen,wie soll ich das ganze einstellen?

habe immer noch nichts gefunden

 

[GTD Bastion]

AW: Debian server oscam+cccam v13 und hd+

schau ma in mein Howto....^^

 

[montecil67]

hallo an alle,
brauche wieder euer hilfe und zwar:
ich habe debian server mit ipc cccam + oscam mit folgende karten: sky it / srg/sct/freex mit cccam,sky de v13 mit oscam jetzt habe ich mir eine hd+ karte besorgt die schwarze hd02 und möchte sie zusammen mit der v13 mit oscam zum laufen bringen,wie soll ich das ganze einstellen?

es lgeht immer noch nicht

 

[montecil67]

das ist mein log

2011/02/24 19:17:23 B75CA6B0 s http thread started
2011/02/24 19:17:23 B75CA6B0 s creating thread for device /dev/ttyUSB0
2011/02/24 19:17:23 B75ACB90 r reader thread started (thread=B75ACB90, label=v13, device=/dev/ttyUSB0, detect=cd, mhz=686, cardmhz=686)
2011/02/24 19:17:23 B75CA6B0 s creating thread for device /dev/ttyUSB4
2011/02/24 19:17:23 B6DABB90 r reader thread started (thread=B6DABB90, label=hd+, device=/dev/ttyUSB4, detect=cd, mhz=357, cardmhz=357)
2011/02/24 19:17:23 B75CA6B0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/02/24 19:17:23 B75CA6B0 s waiting for local card init
2011/02/24 19:17:25 B6DABB90 r hd+ card detected
2011/02/24 19:17:25 B75ACB90 r v13 card detected
2011/02/24 19:17:31 B75ACB90 r ATR: 3F ** ** 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2011/02/24 19:17:32 B6DABB90 r ATR: 3F ** **00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 28
2011/02/24 19:17:33 B75ACB90 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2011/02/24 19:17:34 B6DABB90 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/02/24 19:17:35 B6DABB90 r detect native nagra card
2011/02/24 19:17:35 B75ACB90 r [videoguard2-reader] parental lock setting: FF FF FF FF
2011/02/24 19:17:35 B75ACB90 r [videoguard2-reader] type: VideoGuard Sky Germany, caid: 09C4
2011/02/24 19:17:35 B75ACB90 r [videoguard2-reader] serial: 0020410E, BoxID: 096A95A0, baseyear: 1997
2011/02/24 19:17:35 B75ACB90 r [videoguard2-reader] ready for requests
2011/02/24 19:17:35 B75ACB90 r found cardsystem videoguard2
2011/02/24 19:17:35 B75ACB90 r [videoguard2-reader] v13 card detected
2011/02/24 19:17:35 B75ACB90 r [videoguard2-reader] type: VideoGuard Sky Germany
2011/02/24 19:17:36 B6DABB90 r -----------------------------------------
2011/02/24 19:17:36 B6DABB90 r |id |tier |valid from |valid to |
2011/02/24 19:17:36 B6DABB90 r +----+--------+------------+------------+
2011/02/24 19:17:36 B6DABB90 r |8011|0066 |2011/02/21 |2012/02/23 |
2011/02/24 19:17:36 B6DABB90 r |8011|0067 |2010/01/19 |2010/01/20 |
2011/02/24 19:17:36 B6DABB90 r -----------------------------------------
2011/02/24 19:18:34 B75ACB90 r [videoguard2-reader] ready for requests
2011/02/24 19:18:34 B75ACB90 r found cardsystem videoguard2
2011/02/24 19:18:34 B75ACB90 r [videoguard2-reader] v13 card detected
2011/02/24 19:18:34 B75ACB90 r [videoguard2-reader] type: VideoGuard Sky Germany
2011/02/24 19:18:35 B6DABB90 r -----------------------------------------
2011/02/24 19:18:35 B6DABB90 r |id |tier |valid from |valid to |
2011/02/24 19:18:35 B6DABB90 r +----+--------+------------+------------+
2011/02/24 19:18:35 B6DABB90 r |8011|0066 |2011/02/21 |2012/02/23 |
2011/02/24 19:18:35 B6DABB90 r |8011|0067 |2010/01/19 |2010/01/20 |
2011/02/24 19:18:35 B6DABB90 r -----------------------------------------
2011/02/24 19:18:39 B6DABB90 r card system not supported
2011/02/24 19:18:39 B6DABB90 r Normal mode failed, reverting to Deprecated Mode
2011/02/24 19:18:39 B75ACB90 r [videoguard2-reader] tier: 007b, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:39 B75ACB90 r [videoguard2-reader] tier: 007d, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:39 B75ACB90 r [videoguard2-reader] tier: 0081, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 008e, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00c0, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00c7, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00c8, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00c9, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00ca, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00cb, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00f3, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:40 B75ACB90 r [videoguard2-reader] tier: 00fa, expiry date: 2004/03/30-00:01:00
2011/02/24 19:18:47 B6DABB90 r ATR: 3F ** ** 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 28
2011/02/24 19:18:48 B6DABB90 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/02/24 19:18:50 B6DABB90 r detect native nagra card

2011/02/24 19:19:02 B6DABB90 r card system not supported
2011/02/24 19:19:02 B6DABB90 r card initializing error
2011/02/24 19:19:02 B75CA6B0 s init for all local cards done
2011/02/24 19:19:02 B75CA6B0 s anti cascading disabled
2011/02/24 19:19:02 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 22000 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 22000 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 22000 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:08 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:08 B657A2A0 c localhost: resolved ip=127.0.0.1
2011/02/24 19:19:08 B657A2A0 c encrypted newcamd:27467-client 127.0.0.1 granted (SKYde, au=auto (2 reader))
2011/02/24 19:19:08 B657A2A0 c user SKYde authenticated successfully (CCcam)
2011/02/24 19:19:08 B657A2A0 c AU enabled for user SKYde on reader v13

2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 22000 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 22000 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:02 B657A2A0 c client connected to 22000 port
2011/02/24 19:19:02 B657A2A0 c Connection closed to client
2011/02/24 19:19:02 B657A2A0 c thread B657A2A0 ended!
2011/02/24 19:19:08 B657A2A0 c client connected to 27467 port
2011/02/24 19:19:08 B657A2A0 c localhost: resolved ip=127.0.0.1
2011/02/24 19:19:08 B657A2A0 c encrypted newcamd:27467-client 127.0.0.1 granted (SKYde, au=auto (2 reader))
2011/02/24 19:19:08 B657A2A0 c user SKYde authenticated successfully (CCcam)
2011/02/24 19:19:08 B657A2A0 c AU enabled for user SKYde on reader v13
2011/02/24 19:19:12 B65632A0 c client connected to 22000 port
2011/02/24 19:19:12 B65632A0 c localhost: resolved ip=127.0.0.1
2011/02/24 19:19:12 B65632A0 c encrypted newcamd:22000-client 127.0.0.1 granted (hdplus, au=auto (2 reader))
2011/02/24 19:19:12 B65632A0 c user hdplus authenticated successfully (CCcam)
2011/02/24 19:19:12 B65632A0 c AU disabled for user hdplus

oscam config
[global]
serverip = 127.0.0.1
logfile = stdout
nice = 0
maxlogsize = 1024
saveinithistory = 1
[newcamd]
port = 34000@093B:000000;27467@09C4:000000;22000@1843:003411
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0
[webif]
httpport = 83
httpuser = ******
httppwd = *****
httprefresh = 15
httpallowed = 127.0.0.1,192.168.178.0-192.168.178.254
httphideidleclients = 1
httpreadonly = 0
httpsavefullcfg = 0

oscam user

[account]
user = SKYde
pwd = dino
group = 1
hostname = localhost
au = 1
caid = 09C4
ident = 09C4:000000
cccreshare = 2
[account]
user = hdplus
pwd = hdplus
caid = 1843
ident = 1843:003411
hostname = localhost
uniq = 1
group = 1
au = 1

oscam server

[reader]
label = v13
enable = 1
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 09C4
boxid = ********
detect = cd
mhz = 686
cardmhz = 686
ident = 09C4:000000
group = 1
emmcache = 1,3,2
lb_weight = 100

[reader]
label = HD+
protocol = mouse
detect = CD
smargopatch = 1
group = 1
emmcache = 1,3,2
caid = 1843
device = /dev/ttyUSB4
n3_rsakey = BF*******************************D5
n3_boxkey = A7********7C
mhz = 357
cardmhz = 357


bei oscam status:

Sky de v13 card ok
HD+ card error

 

[GTD Bastion]

AW: Debian server oscam+cccam v13 und hd+

Mach ma HD+ auf 3,68 MHZ

 

[montecil67]

Re: AW: Debian server oscam+cccam v13 und hd+

Mach ma HD+ auf 3,68 MHZ

habe ich gemacht ohne erfolg
smargo habe ich so eingestellt:
mode fixed
frequency 3,69
kernel normal
T-mode =0
EGT= 0

2011/02/24 20:33:13 B65C22A0 c Connection closed to client
2011/02/24 20:33:13 B65C22A0 c thread B65C22A0 ended!
2011/02/24 20:33:13 B65C22A0 c client connected to 22000 port
2011/02/24 20:33:13 B65C22A0 c Connection closed to client
2011/02/24 20:33:13 B65C22A0 c thread B65C22A0 ended!
2011/02/24 20:33:13 B65C22A0 c client connected to 27467 port
2011/02/24 20:33:13 B65C22A0 c Connection closed to client
2011/02/24 20:33:13 B65C22A0 c thread B65C22A0 ended!
2011/02/24 20:33:13 B65C22A0 c client connected to 22000 port
2011/02/24 20:33:13 B65C22A0 c Connection closed to client
2011/02/24 20:33:13 B65C22A0 c thread B65C22A0 ended!
2011/02/24 20:33:13 B65C22A0 c client connected to 27467 port
2011/02/24 20:33:13 B65C22A0 c Connection closed to client
2011/02/24 20:33:13 B65C22A0 c thread B65C22A0 ended!
2011/02/24 20:33:13 B65C22A0 c client connected to 22000 port
2011/02/24 20:33:13 B65C22A0 c Connection closed to client
2011/02/24 20:33:13 B65C22A0 c thread B65C22A0 ended!
2011/02/24 20:33:13 B65C22A0 c client connected to 27467 port
2011/02/24 20:33:13 B65C22A0 c localhost: resolved ip=127.0.0.1
2011/02/24 20:33:13 B65C22A0 c encrypted newcamd:27467-client 127.0.0.1 granted (SKYde, au=auto (2 reader))
2011/02/24 20:33:13 B65C22A0 c user SKYde authenticated successfully (CCcam)
2011/02/24 20:33:13 B65C22A0 c AU enabled for user SKYde on reader v13
2011/02/24 20:33:15 B65AB2A0 c client connected to 22000 port
2011/02/24 20:33:15 B65AB2A0 c localhost: resolved ip=127.0.0.1
2011/02/24 20:33:15 B65AB2A0 c encrypted newcamd:22000-client 127.0.0.1 granted (hdplus, au=auto (2 reader))
2011/02/24 20:33:15 B65AB2A0 c user hdplus authenticated successfully (CCcam)
2011/02/24 20:33:15 B65AB2A0 c AU disabled for user hdplus

 

[GTD Bastion]

AW: Debian server oscam+cccam v13 und hd+

Dann nehm 369 MHZ...da dein Smargo ja anscheinend so konfiguriert ist^^
Ansonsten bau den mal auf 3,68 um.

Und den Smargopatch raus....beim Kumpel mit seinen Smargos stehen 369 und 368 in der Config.

 

[montecil67]

Re: AW: Debian server oscam+cccam v13 und hd+

Dann nehm 369 MHZ...da dein Smargo ja anscheinend so konfiguriert ist^^
Ansonsten bau den mal auf 3,68 um.

Und den Smargopatch raus....beim Kumpel mit seinen Smargos stehen 369 und 368 in der Config.

habe 369 und smargopatsch weggemacht aber trozdem carderror

2011/02/24 20:45:52 B75E26B0 s init for all local cards done
2011/02/24 20:45:52 B75E26B0 s anti cascading disabled
2011/02/24 20:45:52 B65922A0 c client connected to 27467 port
2011/02/24 20:45:52 B65922A0 c Connection closed to client
2011/02/24 20:45:52 B65922A0 c thread B65922A0 ended!
2011/02/24 20:45:52 B65922A0 c client connected to 22000 port
2011/02/24 20:45:52 B65922A0 c Connection closed to client
2011/02/24 20:45:52 B65922A0 c thread B65922A0 ended!
2011/02/24 20:45:52 B65922A0 c client connected to 27467 port
2011/02/24 20:45:52 B65922A0 c Connection closed to client
2011/02/24 20:45:52 B65922A0 c thread B65922A0 ended!
2011/02/24 20:45:52 B65922A0 c client connected to 22000 port
2011/02/24 20:45:52 B65922A0 c Connection closed to client
2011/02/24 20:45:52 B65922A0 c thread B65922A0 ended!
2011/02/24 20:45:52 B65922A0 c client connected to 27467 port
2011/02/24 20:45:52 B657B2A0 c client connected to 22000 port
2011/02/24 20:45:52 B657B2A0 c localhost: resolved ip=127.0.0.1
2011/02/24 20:45:52 B657B2A0 c encrypted newcamd:22000-client 127.0.0.1 granted (hdplus, au=auto (2 reader))
2011/02/24 20:45:52 B657B2A0 c user hdplus authenticated successfully (CCcam)
2011/02/24 20:45:52 B657B2A0 c AU disabled for user hdplus
2011/02/24 20:45:52 B65922A0 c Connection closed to client
2011/02/24 20:45:52 B65922A0 c thread B65922A0 ended!
2011/02/24 20:45:59 B65922A0 c client connected to 27467 port
2011/02/24 20:45:59 B65922A0 c localhost: resolved ip=127.0.0.1
2011/02/24 20:45:59 B65922A0 c encrypted newcamd:27467-client 127.0.0.1 granted (SKYde, au=auto (2 reader))
2011/02/24 20:45:59 B65922A0 c user SKYde authenticated successfully (CCcam)
2011/02/24 20:45:59 B65922A0 c AU enabled for user SKYde on reader v13

 

[GTD Bastion]

AW: Debian server oscam+cccam v13 und hd+

Versuch das mal:

[reader]
label                         = hdplus
enable                        = 1
protocol                      = smartreader
device                        = 001:004 <--Anpassen!
showcls                       = 0
caid                          = 1843
rsakey                        = Bxxx5
boxkey                        = AxxxC
detect                        = cd
mhz                           = 369
cardmhz                       = 368
group                         = 2 <--Anpassen
emmcache                      = 1,3,2
lb_weight                     = 100

 

[montecil67]

Re: AW: Debian server oscam+cccam v13 und hd+

Versuch das mal:

[reader]
label                         = hdplus
enable                        = 1
protocol                      = smartreader
device                        = 001:004 <--Anpassen!
showcls                       = 0
caid                          = 1843
rsakey                        = Bxxx5
boxkey                        = AxxxC
detect                        = cd
mhz                           = 369
cardmhz                       = 368
group                         = 2 <--Anpassen
emmcache                      = 1,3,2
lb_weight                     = 100

Nichts zu machen= error

 

[GTD Bastion]

AW: Debian server oscam+cccam v13 und hd+

Du hast eine PN...^^
​

 

[montecil67]

AW: Debian server oscam+cccam v13 und hd+

es geht immer noch nicht :emoticon-0138-think:JC_hmmm:

 

[czutok]

AW: Debian server oscam+cccam v13 und hd+

warum ist der reader für hd+ device = /dev/ttyUSB4

und der für die v13 device = /dev/ttyUSB0

was ist da zwischen ??

die HD+ karte wird erkant , und ich vermute das die zwei reader einfach zu falsche karte eingeordnet sind