Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Debian Jessie

    Nobody is reading this thread right now.
Ohne Portangabe wird der Standardport 80 abgerufen auf den die http Seiten laufen.

LG Osprey
gerade probiert mit standard port
<VirtualHost *:80> und restartet
/etc/init.d/ssh restart
mit 2 browser..cache ausgeleert... probiert geht aber nicht

wenn ich mir post von phantom anssehe
IPC-Server mit Debian zusätzlich absichern

In /etc/apache2/sites-enabled/000-default sein und meine vergleiche....
Meine Struktur sieht ganz anders aus oder ist jetzt bei jessie so keine ahnung....
könnte jemand von euch In /etc/apache2/sites-enabled/000-default von jessie hier posten das ich vergleichen kann???
 
Zuletzt bearbeitet von einem Moderator:
sooo na edlich geschaft:):confused:
in /etc/apache2/sites-enabled/000-default.conf und /etc/apache2/ports.conf habe 2 verschiedene ports gehabt ....kleine fehler große wirkung:D;)
nur noch frage was zum verbesserungen auslagerunsdatei ...etc etwas mappen oder auschalten unnötige last??
Für Hilfe Danke an alle beteiligten;)
Du musst Regestriert sein, um das angehängte Bild zusehen.
 

Anhänge

Du musst angemeldet sein, um die Anhangsliste zu sehen.
Zuletzt bearbeitet von einem Moderator:
hmmm..hast du recht sehe jetzt sind noch mehr 2/24
g 29 14:27:02 xxx networking[20188]: Deconfiguring network interfaces.../etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20188]: ifdown: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20188]: failed.
Aug 29 14:27:02 xxx networking[20221]: Configuring network interfaces.../etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20221]: ifquery: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20221]: /etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20221]: ifquery: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20221]: /etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20221]: ifup: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20221]: failed.
Aug 29 14:28:01 xxx CRON[20496]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Aug 29 14:28:01 xxx CRON[20497]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 14:29:00 xxx CRON[20834]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 14:29:00 xxx CRON[20835]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Aug 29 14:30:01 xxx CRON[21081]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 14:30:01 xxx CRON[21082]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Aug 29 14:31:01 xxx CRON[21408]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 14:31:01 xxx CRON[21409]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Aug 29 14:32:01 xxx CRON[21712]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 14:32:01 xxx CRON[21713]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Aug 29 14:33:01 xxx CRON[21958]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 14:33:01 xxx CRON[21959]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
 
Hi,
Aug 29 14:27:02 xxx networking[20188]: ifdown: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20188]: failed.
Aug 29 14:27:02 xxx networking[20221]: Configuring network interfaces.../etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20221]: ifquery: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20221]: /etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20221]: ifquery: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20221]: /etc/network/interfaces:14: misplaced option
Aug 29 14:27:02 xxx networking[20221]: ifup: couldn't read interfaces file "/etc/network/interfaces"
Aug 29 14:27:02 xxx networking[20221]: failed.

Poste mal Deine /etc/network/interfaces

Die Kiste "zusätzlich abzusichern" ist in meinen Augen nicht notwendig, wenn ein Router/Firewall davorhängt.

Gruß
 
Zuletzt bearbeitet von einem Moderator:
Hi,
Configuring network interfaces.../etc/network/interfaces:14: misplaced option
zeig mal bitte deine ./etc/network/interfaces. Da ist wohl eine Option gesetzt, die da nicht hingehört.
Wenn die immer noch so aussieht wie in #49, und du eine statische IP verwenden willst, dann solltest du mal dhcp-Zeile deaktivieren oder löschen.
auto lo
iface lo inet loopback
allow-hotplug eth0
#iface eth0 inet dhcp
iface eth0 inet static
#auto eth0
address 192.168.xx.xx
netmask 255.255.255.0
gateway 192.168.xx.1
 
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet static
auto eth0
address 192.168.0.xxx
netmask 255.255.255.0
gateway 192.168.0.1
 
Hi,
nimm das "auto eth0" raus,
dafür sorgt bei dir "allow-hotplug eth0"
 
Hi,

so schaut das bei mir aus:
Code:
pi@raspberrypi:~ $ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

# auto lo
# iface lo inet loopback

# iface eth0 inet manual

# allow-hotplug wlan0
# iface wlan0 inet manual
#    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

# allow-hotplug wlan1
# iface wlan1 inet manual
#    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

# Ethernet
auto etho
allow-hotplug eth0
iface eth0 inet static
address 192.168.46.99
netmask 255.255.255.0
gateway 192.168.46.1
dns-nameservers 192.168.46.1 8.8.8.8
# dns-domain raspberrypi.local # optional
pi@raspberrypi:~ $

Nochmal: Private Adressen brauchst nicht XXXen...

Gruß
 
Zuletzt bearbeitet von einem Moderator:
Hi,
@axfa77
das LoopBack-Interface sollte man nie deaktivieren.
Diese Einträge für die Netzwerkschnittstelle sind elementarer Bestandteil von Linux. Fehlt dieser Eintrag, so können Programme nicht mehr untereinander kommunizieren.

Osemu z.B. würde somit nicht mehr funktionieren, wenn er über localhost angesprochen werden soll.
 
Hi,

richtig, Recht hast Du. Ist mir gar nicht aufgefallen bisher, Standard-Raspbian Installation. o_O

Merci.
 
hab ich gesehen;)
<<nimm das "auto eth0" raus,....jani das hab schon auch probiert
Aug 29 16:06:57 xxx networking[15273]: Deconfiguring network interfaces...done.
Aug 29 16:06:57 xxx ntpdate[15325]: Can't find host 0.debian.pool.ntp.org: Name or service not known (-2)
Aug 29 16:06:57 xxx ntpdate[15325]: Can't find host 1.debian.pool.ntp.org: Name or service not known (-2)
Aug 29 16:06:57 xxx ntpdate[15325]: Can't find host 2.debian.pool.ntp.org: Name or service not known (-2)
Aug 29 16:06:57 xxx ntpdate[15325]: Can't find host 3.debian.pool.ntp.org: Name or service not known (-2)
Aug 29 16:06:57 xxx ntpdate[15325]: no servers can be used, exiting
Aug 29 16:06:58 xxx networking[15299]: Configuring network interfaces...done.
Aug 29 16:07:01 xxx CRON[15411]: (root) CMD (/var/emu/script/oscam-watchdog.sh #OScam - Teste ob OScam laeuft (jede Minute))
Aug 29 16:07:01 xxx CRON[15412]: (root) CMD (/var/emu/script/apache2-watchdog.sh >/dev/null 2>&1)
Aug 29 16:07:07 xxx ntpdate[15359]: step time server 131.130.251.107 offset 0.234853 sec
 
nameserver 8.8.8.8
nameserver 8.8.4.4
xxx heis names der benutzer das weist du;)
mir ist nur kommisch es läuft aber server ohne ausetzer
wenn ich
ping google.de
64 bytes from fra16s08-in-f195.1e100.net (172.217.16.195): icmp_seq=49 ttl=54 time=20.2 ms
64 bytes from fra16s08-in-f195.1e100.net (172.217.16.195): icmp_seq=50 ttl=54 time=20.8 ms
64 bytes from fra16s08-in-f195.1e100.net (172.217.16.195): icmp_seq=51 ttl=54 time=21.0 ms
64 bytes from fra16s08-in-f195.1e100.net (172.217.16.195): icmp_seq=52 ttl=54 time=19.4 ms
64 bytes from fra16s08-in-f195.1e100.net (172.217.16.195): icmp_seq=53 ttl=54 time=23.8 ms
 
Zuletzt bearbeitet:
Zurück
Oben