Yes, the CI Module 1868 is primarily designed to work with TVs that have a built-in Common Interface (CI) slot. However, there are ways to make it work with a Set Top Box (STB) as well. Here's a step-by-step guide:
1.
Check Compatibility: Not all STBs have a slot for CI modules, so first ensure your STB has one. If not, you may need to purchase an adapter or a different box that supports CI.
2.
Pairing Process: Usually, CI modules need to be paired to a smart card, which in turn needs to be paired with your equipment (in this case, your STB). This process can vary slightly depending on your specific equipment and card provider.
3.
Insert the Smart Card into the Module: Insert the paired Smart Card into the CI Module 1868. Make sure it's inserted correctly. Usually, the chip should face downwards.
4.
Insert the Module into the STB: Insert the CI Module with the Smart Card into the CI slot on your STB. Make sure it's correctly inserted.
5.
Switch On and Tune: Now turn on your STB and tune in to any of the scrambled channels you should have access to with your card. The STB should now communicate with the CI+ module and you should be able to see the channel.
If the CI Module 1868 is not working with your STB, it could be due to a few reasons:
- The STB is not compatible with the CI+ standard.
- The smart card is not paired correctly.
- The firmware of your STB may need an update.
If you continue facing issues, I would recommend reaching out to the manufacturer or your service provider for additional assistance.