You are referring that people updated from 4014 to 4364 without issues?
In theory, 4014 is for SFD2 cars (people say to me this) but my car is 2024 pre-facelift and now is on 4014.
Can you confirm that it is safe from 4014 to 4364? There is another option, 4390 has red engineer menu enabled.
Anybody can get this version and share it?
am on 4014 as well. I have read that people successfully upgraded from 4014 to 4364, because 4364 does not check train list. And as far as I have read 4364 and 4398 are the same, at least both of them have the new feature of showing carplay/Android auto navigation turn on VC and HeadUp display.
I received info from VCtool supprt on how to activate the red enginering menu after P43XX.
"Activation of red menu via FoD Tweaker on compatible systems is already available - you just need to provide the correct FeC code to activate the red menu"
And the code is: 00000700 GEM Activation
Hello, I am experiencing an issue. Does anyone have any information about this?
I have a 2021 Audi A3. I previously installed version “MHI3_ER_AU_P4014” and had no issues. Today, I installed version “MHI3_ER_AU_P4364.” The installation completed successfully. However, after the installation, the message “Entertainment system is loading, please wait” remains on the head-up display, and multimedia data is not coming through. However, I have no issues with the multimedia screen. Only the multimedia and phone data are not coming through on the head-up display. Does anyone know how I can resolve this issue?
Du musst Regestriert sein, um das angehängte Bild zusehen.
Du musst Regestriert sein, um das angehängte Bild zusehen.
Hallo, ich habe ein Problem. Hat jemand Informationen zu diesem Thema?
Ich habe einen Audi A3 2021. Ich hatte zuvor die Version „MHI3_ER_AU_P4014” installiert und hatte keine Probleme. Heute habe ich die Version „MHI3_ER_AU_P4364” installiert. Die Installation wurde erfolgreich abgeschlossen. Nach der Installation bleibt jedoch die Meldung „Entertainment-System wird geladen, bitte warten” auf dem Ghost-Display stehen und es werden keine Multimedia-Daten angezeigt. Auf dem Multimedia-Bildschirm habe ich jedoch keine Probleme. Nur auf dem Ghost-Display werden keine Multimedia- und Telefondaten angezeigt. Weiß jemand, wie ich dieses Problem lösen kann?
Du musst Regestriert sein, um das angehängte Bild zusehen.
Du musst Regestriert sein, um das angehängte Bild zusehen.
Anhänge
Du musst angemeldet sein, um die Anhangsliste zu sehen.
DAs passiert wenn man ohne TPI einfach irgendwelche Updates aus dem Netz nutzt. Bei diesen Systemen sollte immer entlang der TPI aktualisiert werden, weil manchmal andere Abhängigkeiten gegeben sein müssen
I have not tested this yet, but I received info from VCtool supprt on how to activate the red enginering menu after P43XX.
"Activation of red menu via FoD Tweaker on compatible systems is already available - you just need to provide the correct FeC code to activate the red menu"
And the code is: 00000700 GEM Activation
Ja, Sie haben Recht, aber leider ist in meinem Wohnsitzland (Türkei) kein Update-Support oder Online-Check möglich. Denn AUDI ist in diesem Land nicht offiziell vertreten, es gibt nur Händler, die jedoch keine Kenntnisse in technischen Fragen haben. Was empfehlen Sie mir in dieser Angelegenheit? Ist ein Downgrade möglich?
17 Dashboard
System description: FBenRDW------
Software number: 8Y0920790C
Software version: 0218
Hardware number: 8Y0920790B
Hardware version: H09
Faults:
U105400 - Information electronics control module 1
No Communication
static
U10E000 - Front sensor system for driver assistance systems
No communication
static
B184C00 - Release active
Intermittent
5F Multimedia
System description: MU-TH-ND-RW
Software number: 8Y0035048M
Software version: 4364
Hardware number: 8Y0035048A
Hardware version: 044
Faults:
B184C00 - Release active
static
B18B0F3 - VKMS
Invalid key requirement detected during use
static
19 Gateway
System description: GW2020 High
Software number: 5WA907530Q
Software version: 7300
Hardware number: 5WA907530G
Hardware version: 756
Faults:
U15D000 - Data bus diagnostics
Single wire mode
Intermittent
U014000 - Lost Communication With Body Control Module
Intermittent
U164300 - Ethernet Steuergerät für Rückfahrkamerasystem
keine Kommunikation
static
U123000 - Ethernet databus branch 5
No communication
Intermittent
U140600 - Static current
too high
Intermittent
U014000 - Lost Communication With Body Control Module
Intermittent
B184C00 - Release active
Intermittent
B18B0F0 - VKMS
Missing adaptation
Intermittent
My error codes are like this. What do you think I should do?
I enabled the user profile selection feature, it loaded, then I disabled it again. My problem was solved. It can be found under 5F -> Adaption.