darius1
Teammitglied
es ist soweit es gibt Android 4.3 für Samsung Galaxy 4 :Testversion aber funktioniert 100%
Model: GT-I9505
Country: Open Europe
Version: Android 4.3
Changelist: 1715731
Build date: Fri, 20 Sep 2013 18:48:24 +0000
Product Code: OXA
PDA: I9505XXUEMI8
CSC: I9505OXAEMI8
MODEM: I9505XXUEMI8
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar to BL
- Add CP_I9505XXUEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
P.S. ROOT-en geht nocht nicht , S4 funktioniert schneller getestet
Model: GT-I9505
Country: Open Europe
Version: Android 4.3
Changelist: 1715731
Build date: Fri, 20 Sep 2013 18:48:24 +0000
Product Code: OXA
PDA: I9505XXUEMI8
CSC: I9505OXAEMI8
MODEM: I9505XXUEMI8
Sie müssen registriert sein, um Links zu sehen.
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From
Sie müssen registriert sein, um Links zu sehen.
or
Sie müssen registriert sein, um Links zu sehen.
)- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar to BL
- Add CP_I9505XXUEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAEMI8_1715731_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
P.S. ROOT-en geht nocht nicht , S4 funktioniert schneller getestet