Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Problema aiuto per easymouse 2 con tvsat

    Nobody is reading this thread right now.
anche io uso ipc con un thin client s400 siemens
anche con la 6089 non va
sto diventando pazzo
 
Re: AW: aiuto per easymouse 2 con tvsat

posta le config che si da aiuto meglio

il log cosa dice


posta anche la udev

le config sono nel primo post qui Problema aiuto per easymouse 2 con tvsat
udev non l'ho configurato

il log se attivo il reder tvsat è

questo
012/12/21 21:34:47 A212810 h tvsat [smargo] Restarting reader
2012/12/21 21:34:47 A212810 h tvsat [smargo] creating thread for device 003:002
2012/12/21 21:34:47 A3C7E20 r tvsat [smargo] smargo init
2012/12/21 21:34:47 A3C7E20 r tvsat [smargo] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/12/21 21:34:47 A3C7E20 r tvsat [smargo] Cannot open device: 003:002
 
AW: aiuto per easymouse 2 con tvsat

mi sa che fai troppa confusione con le config... posta la oscam.server con il device = Serial: xxxxxx dopo vediamo il da farsi, ogni volta che cambi le config per vedere se funzionano devi riavviare la oscam e delle volte server riavviare il tutto.
 
ha ricominciato a fare le bizze

conf
[global]
logfile = /var/log/ipc/OScam.log
fallbacktimeout = 2000
cachedelay = 120
nice = -1
maxlogsize = 512
preferlocalcards = 1
dropdups = 1
failbantime = 5

[cccam]
port = *****
version = 2.3.0
reshare = 1
stealth = 1

[webif]
httpport = ****
httpuser = *****
httppwd = *****
httptpl = /var/etc/picons
httphelplang = it
httphideidleclients = 1
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

server
[reader]
label = Media7
protocol = smartreader
device = 001:004
caid = 1805
rsakey = A9************************B5
detect = cd
nagra_read = 2
mhz = 369
cardmhz = 368
ident = 1805:000000,008D11
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = tvsat
protocol = smargo
device = dev/TIVUSAT
caid = 183D
rsakey = A9**************************B5
detect = cd
nagra_read = 2
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 3
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1

user
tutti i miei user

seriale del mio reader in rosso
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/ttyUSB0/tty/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="tty"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/ttyUSB0':
KERNELS=="ttyUSB0"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0':
KERNELS=="3-1:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
ATTRS{supports_autosuspend}=="0"
ATTRS{interface}=="FT232R USB UART"

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-1':
KERNELS=="3-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="6237389"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A901LODH"

looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3':
KERNELS=="usb3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="36"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="3"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.32-5-686 ohci_hcd"
ATTRS{product}=="OHCI Host Controller"
ATTRS{serial}=="0000:00:03.1"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:03.1':
KERNELS=="0000:00:03.1"
SUBSYSTEMS=="pci"
DRIVERS=="ohci_hcd"
ATTRS{vendor}=="0x1039"
ATTRS{device}=="0x7001"
ATTRS{subsystem_vendor}=="0x1039"
ATTRS{subsystem_device}=="0x7001"
ATTRS{class}=="0x0c0310"
ATTRS{irq}=="3"
ATTRS{local_cpus}=="ffffffff"
ATTRS{local_cpulist}=="0-31"
ATTRS{modalias}=="pci:v00001039d00007001sv00001039sd00007001bc0Csc03i10"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

udev
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A901LODH", SYMLINK+="TIVUSAT"

log
2012/12/22 14:11:17 8FC8BD8 r tvsat [smargo] Reader initialized (device=dev/TIVUSAT, detect=cd, mhz=357, cardmhz=357)
2012/12/22 14:11:18 8FC8BD8 r tvsat [smargo] card detected
2012/12/22 14:11:21 8FC8BD8 r tvsat [smargo] ATR: 3F ******************************************************* 64
2012/12/22 14:11:21 8FC8BD8 r tvsat [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2012/12/22 14:11:21 8FC8BD8 r tvsat [smargo] Setting baudrate to 111600 bps
2012/12/22 14:11:21 8FC8BD8 r tvsat [smargo] Calculated work ETU is 6.40 us
2012/12/22 14:11:21 8FC8BD8 r tvsat [smargo] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 5.00 Mhz (specified in reader->mhz)
2012/12/22 14:11:22 8FC8BD8 r tvsat [smargo] detect nagra tiger card
2012/12/22 14:11:23 8FC8BD8 r tvsat [smargo] Resync error: readtimeouts 19983/3 (max/min) us, writetimeouts 19/5 (max/min) us
2012/12/22 14:11:23 8FC8BD8 r tvsat [smargo] T1 Resync command succesfull ifsc = 32
2012/12/22 14:11:24 8FC8BD8 r tvsat [smargo] Resync error: readtimeouts 19983/3 (max/min) us, writetimeouts 19/5 (max/min) us
2012/12/22 14:11:25 8FC8BD8 r tvsat [smargo] T1 Resync command succesfull ifsc = 32
2012/12/22 14:11:25 8FC8BD8 r tvsat [smargo] card system not supported
2012/12/22 14:11:25 8FC8BD8 r tvsat [smargo] Normal mode failed, reverting to Deprecated Mode
2012/12/22 14:11:27 8FC8BD8 r tvsat [smargo] ATR: 3F ******************************************************* 64
2012/12/22 14:11:27 8FC8BD8 r tvsat [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2012/12/22 14:11:27 8FC8BD8 r tvsat [smargo] Calculated work ETU is 74.40 us
2012/12/22 14:11:28 8FC8BD8 r tvsat [smargo] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 5.00 Mhz (specified in reader->mhz)
2012/12/22 14:11:29 8FC8BD8 r tvsat [smargo] detect nagra tiger card
2012/12/22 14:11:30 8FC8BD8 r tvsat [smargo] Resync error: readtimeouts 19983/3 (max/min) us, writetimeouts 23/4 (max/min) us
2012/12/22 14:11:30 8FC8BD8 r tvsat [smargo] T1 Resync command succesfull ifsc = 32
2012/12/22 14:11:31 8FC8BD8 r tvsat [smargo] Resync error: readtimeouts 19983/3 (max/min) us, writetimeouts 28/4 (max/min) us
2012/12/22 14:11:31 8FC8BD8 r tvsat [smargo] T1 Resync command succesfull ifsc = 32
2012/12/22 14:11:31 8FC8BD8 r tvsat [smargo] card system not supported
2012/12/22 14:11:31 8FC8BD8 r tvsat [smargo] card initializing error

vedo che ci sono degli errori nel log, ma non riesco a capire cosa c'è da correggere

ad ogni modifica riavvio completamente il server

ho controllato più volte le config ma a me sembrano a posto

grazie
 
Zuletzt bearbeitet:
AW: aiuto per easymouse 2 con tvsat

allora siccome ho avuto anche io dei problemi con udev e ti spiego ,

se uso il device= dev/tivusat non mi funziona la mia card
se invece uso senza udev con il device= Serial:Reader xxxxx
rifunziona tutto.

P.S. IPC e un po delicato sul fatto delle config, quando fai dei settaggi falli tramite Webif dopo salvi e fai un SHUTDOWN e dopo restart.
 
Re: AW: aiuto per easymouse 2 con tvsat

ho messo così device = Serial:Reader A901LODH


ho fatto shoutdown da webif
e restart direttamente dal server (schiacciando fisicamente il pulsante di accensione)
facendo restart da webif l'oscam non riparte

questo è il risultato


2012/12/22 18:15:30 90D3BD8 r tvsat [mouse] ERROR: Opening device Serial:Reader A901LODH (errno=2 No such file or directory)
2012/12/22 18:15:30 90D3BD8 r tvsat [mouse] Cannot open device: Serial:Reader A901LODH
 
Zuletzt bearbeitet:
oltretutto quando il reader di tvsat e attivo (anche se non funziona) mi mette in off tutti i miei client appena lo disattivo(da webif) tutto ritorna normale, lo si puo vedere dal client in lan

log del client in lan
2012/12/22 18:44:37 597BB8 p s400_oscam [cccam] connecting to 192.168.0.25:1****
2012/12/22 18:44:40 5BFB18 c client800se (1805&000000/0000/14DB/91:BA7CCD8101C8B50FA543F62759C0B5E8): rejected group (121 ms) (0/0/0/0) - 1805:14DB unknown (no matching reader)
2012/12/22 18:44:40 597BB8 p s400_oscam [cccam] connect failed: Connection timed out
2012/12/22 18:44:41 597BB8 p s400_oscam [cccam] connecting to 192.168.0.25:1#### (qui disattivo il reader di tvsat)
2012/12/22 18:44:50 5BFB18 c client800se (1805&000000/0000/14DB/91:AD3DBA70EF74593840C43A578BA6A6A0): found (253 ms) by s400_oscam - 1805:14DB unknown
2012/12/22 18:44:59 5BFB18 c client800se (1805&000000/0000/14DB/91:070934F7AD6E5780DEC823FDDABA7EF9): found (248 ms) by s400_oscam - 1805:14DB unknown
 
Zuletzt bearbeitet:
AW: aiuto per easymouse 2 con tvsat

ai provato cosí

[reader]
label = tvsat
protocol = smargo
device = dev/ttyUSB0
caid = 183D
rsakey = A9**************************B5
detect = cd
mhz = 357
cardmhz = 357
ident = 183D:005411
group = 3
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-g = 1
 
AW: Re: AW: aiuto per easymouse 2 con tvsat

guarda che nella tua udev la card lai chiamata TIVUSAT mentre nella config ai scritto tivusat e importante che lo scrivi esatamente come in udev


fai un po di confusione o ai risolto

fammi capire usi smargo o easymouse perche adesso si parla del smargo
 
Re: AW: Re: AW: aiuto per easymouse 2 con tvsat

ho uno smargo con la card mediaset e non mi da nessun problema

da qualche giorno o acquistato un easymouse2 per la card tvsat, naturalmente devono lavorare sullo stesso server, ma tutto questo lo si capisce dalle mie configurazioni,

per quanto riguarda la card, è chiamata TIVUSAT sia in udev che nel reader device = dev/TIVUSAT il "tvsat" che dici tu è questo label = tvsat ma a quanto ne so è solo una descrizione del reader, se non sbaglio
 
allora penso di aver capito, il problema sta proprio nel riavvio , la card viene regolarmente riconosciuta (testato più volte) solo ed esclusivamente se faccio il riavvio da putty inviando il seguente comando

shutdown -r now

così facendo la card è sempre riconosciuta ed il reader funziona perfettamente

quindi ad ogni modifica sei settaggi devo riavviare in quel modo (spero di non essere smentito a breve)
 
AW: aiuto per easymouse 2 con tvsat

si ti avevo accennato qualcosa del genere nei post sopra

P.S. IPC e un po delicato sul fatto delle config, quando fai dei settaggi falli tramite Webif dopo salvi e fai un SHUTDOWN e dopo restart.


delle volte basta una piccolezza ho un semplice riavvio del sistema e funziona, per esperienza ogni cambiamento di config
un riavvio del sistema risolve il tutto.
 
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…