Information ausblenden
Das Digital Eliteboard ist ein Kostenloses Forum. Wenn du alle Bereiche sehen möchtest oder Fragen hast, musst du dich zunächst Registrieren.

Jetzt Registrieren

Problema Aiuto per come utilizzare Tivusat con L-Line

Dieses Thema im Forum "OScam (Italiana)" wurde erstellt von cdlr1be, 14. November 2012.

  1. cdlr1be
    Offline

    cdlr1be Newbie

    Registriert:
    7. November 2009
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Salve sul mio DM7020S uso CCcam 2.1.3 & oscam rev.6089

    Dove non riescho e con la mia Tivusat , non so come fare per utilizzare une L-Line sul mio DM800HD

    Se poteti aiutarmi e darmi una config per uso di L-Line.

    Grazie
     
    #1
  2. jjk2
    Offline

    jjk2 Freak

    Registriert:
    20. Oktober 2012
    Beiträge:
    215
    Zustimmungen:
    44
    Punkte für Erfolge:
    28
    scua ma perche non usi la Nline? la L sarà piu veloce ma per tivusat è irrisorio
     
    #2
  3. cdlr1be
    Offline

    cdlr1be Newbie

    Registriert:
    7. November 2009
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Re: Aiuto per come utilizzare Tivusat con L-Line

    Perche la mia Sky est con L Line e cosi retso il tutto con L-Line

    Cosi vito che commincio con oscam, e che con L-Line mi va, resto il tutto in L-Line se per Tivusat la cosa e possibile.

    Ma io per ora non ci sono parvenuto

    Grazie per l'aiuto
     
    #3
  4. cdlr1be
    Offline

    cdlr1be Newbie

    Registriert:
    7. November 2009
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Salve a tutti

    sono riuscito a utilizzare nel mio DM7020S Cccam 2.1.3 & Oscam rev.7938 , slot superiore Sky it e Inferiore Tivusat.

    Ma per Tivusat non prende i aggiornamenti settimanale, potete dirmi come fare per aggiornare Tivusat

    Grazie
     
    #4
  5. rodd
    Offline

    rodd Ist oft hier

    Registriert:
    22. März 2009
    Beiträge:
    154
    Zustimmungen:
    58
    Punkte für Erfolge:
    28
    AW: Re: Aiuto per come utilizzare Tivusat con L-Line

    sostituisci il binario 2.1.3 con 2.3.0 efalla aggiornare da una f line
     
    #5
  6. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.242
    Punkte für Erfolge:
    113
    AW: Aiuto per come utilizzare Tivusat con L-Line

    Se non posti le configs e un log come ti dobbiamo aiutare???
     
    #6
  7. cdlr1be
    Offline

    cdlr1be Newbie

    Registriert:
    7. November 2009
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Re: AW: Aiuto per come utilizzare Tivusat con L-Line

    Salve,
    Dunque la mia Sheda Tivusat va e utilizzo CCcam2.1.3 & Oscam rev.7938
    Il problema e che non prende i aggiornamenti settimanale, e non so dove sbaglio
    Grazie per l’aiuto

    # oscam.conf

    [global]
    logfile = /var/log/oscam.log
    cachedelay = 120
    nice = -19
    maxlogsize = 50
    preferlocalcards = 1
    saveinithistory = 1

    [monitor]
    port = 989
    nocrypt = 0.0.0.0-255.255.255.255
    hideclient_to = 15
    monlevel = 4
    appendchaninfo = 1

    [cs357x]
    port = 14002
    serverip = 192.168.0.6
    suppresscmd08 = 1

    [webif]
    httpport = 9189
    httphelplang = fr
    httpuser = xxxxx
    httppwd = xxxxx
    httprefresh = 10
    httpallowed = 0.0.0.0-255.255.255.255

    # oscam.server

    [ reader]
    label = tivusat
    protocol = internal
    device = /dev/sci0
    caid = 183D
    rsakey = A92DA………..64B5
    detect = cd
    mhz = 500
    cardmhz = 368
    group = 2
    emmcache = 1,1,2
    blockemm-unknown = 1
    blockemm-g = 1
    auprovid = 005411

    # oscam.user

    [account]
    user = Tivusat
    pwd = tivusat
    group = 2
    au = tivusat
    caid = 183D
    ident = 183D:000000

    Nello CCam.cfg

    L: 192.168.0.6 14002 Tivusat tivusat 183D 000000 256
     
    Zuletzt von einem Moderator bearbeitet: 28. November 2012
    #7
  8. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.242
    Punkte für Erfolge:
    113
    AW: Aiuto per come utilizzare Tivusat con L-Line

    Devi aggiornare con un account dvbapi! Con la L-Line l´aggiornamento non funziona.
     
    #8
  9. cdlr1be
    Offline

    cdlr1be Newbie

    Registriert:
    7. November 2009
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Aiuto per come utilizzare Tivusat con L-Line

    Salve ho fatto la modifica che mi hai suggerito
    Ma penso che ho fatto un errore, posto i file e log per vedere dove ho sbagliato.
    Devo dire dopo qualche Restart Dream7020 mi pare che dalle volte e il Dvbapi che va …
    Sono perso , un po d’aiuto
    Grazie

    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938
    [global]
    logfile = /var/log/oscam.log
    cachedelay = 120
    nice = -19
    maxlogsize = 50
    preferlocalcards = 1

    [cs357x]
    port = 14002
    serverip = 192.168.0.6
    suppresscmd08 = 1

    [dvbapi]
    enabled = 1
    au = 1
    user = localuser
    boxtype = dreambox

    [monitor]
    port = 989
    nocrypt = 0.0.0.0-255.255.255.255
    monlevel = 4
    appendchaninfo = 1

    [webif]
    httpport = 9189
    httpuser = XXXXX
    httppwd = XXXXXXXXXX
    httphelplang = fr
    httprefresh = 10
    httpallowed = 0.0.0.0-255.255.255.255
    appendchaninfo = 1

    # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938
    [ reader]
    label = tivusat
    protocol = internal
    device = /dev/sci0
    caid = 183D
    rsakey = A92DA………64B5
    detect = cd
    mhz = 500
    cardmhz = 368
    group = 2
    emmcache = 1,1,2
    blockemm-unknown = 1
    blockemm-g = 1
    auprovid = 005411

    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938


    [account]
    user = localTivusat
    pwd = tivusat
    caid = 183D
    au = tivusat
    group = 2
    ident = 183D:000000

    [account]
    user = localuser
    description = dvbapi
    caid = 183D
    au = tivusat
    group = 2
    ident = 183D:000000


    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Thu Nov 29 12:47:11 2012
    -------------------------------------------------------------------------------
    29/11/2012 12:47:14 101CDF60 r tivusat [internal] detect nagra tiger card
    29/11/2012 12:47:14 101CDF60 r tivusat [internal] type: NAGRA, caid: 183D, IRD ID: ############
    29/11/2012 12:47:14 101CDF60 r tivusat [internal] ProviderID: 00 00 54 11
    29/11/2012 12:47:14 101CDF60 r tivusat [internal] found card system nagra
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] ROM: T I G E R 0 0 3
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] REV: R e v 2 5 0
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] SER: ############
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] CAID: 183D
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] Activation Date : 01/01/2009
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] Expiry Date : 01/01/2038
    29/11/2012 12:47:14 101CDF60 r tivusat [nagra] ready for requests
    29/11/2012 12:47:18 0 s init for all local cards done
    29/11/2012 12:47:18 0 s anti cascading disabled
    29/11/2012 12:47:18 101D6CC8 c plain dvbapi-client granted (localuser, au=on (1 reader))
    29/11/2012 12:47:18 101D6CC8 c dvbapi: Detected /dev/dvb/card0/demux0 Api: 1
    29/11/2012 12:47:18 101D6CC8 c dvbapi: [ADD PID 0] CAID: 0100 ECM_PID: 06AA PROVID: 000030
    29/11/2012 12:47:18 101D6CC8 c dvbapi: [ADD PID 1] CAID: 0100 ECM_PID: 0FE2 PROVID: 000030
    29/11/2012 12:47:18 101D6CC8 c dvbapi: [ADD PID 2] CAID: 183D ECM_PID: 1046 PROVID: 000000
    29/11/2012 12:47:18 101D6CC8 c dvbapi: Found 3 ECMpids and 3 STREAMpids in PMT
    29/11/2012 12:47:18 101D6CC8 c dvbapi: New program number: 2142 (0100:2142 unknown) [pmt_list_management 3]
    29/11/2012 12:47:18 101D6CC8 c dvbapi: ERROR: Can't open device /dev/dvb/card0/ca0 (errno=16 Device or resource busy)
    29/11/2012 12:47:18 0 --- Skipped 2 duplicated log lines ---
    29/11/2012 12:47:18 101D6CC8 c dvbapi: Start descrambling PID #2 (CAID: 183D) 1
    29/11/2012 12:47:18 101D6CC8 c dvbapi: ERROR: Can't open device /dev/dvb/card0/ca0 (errno=16 Device or resource busy)
    29/11/2012 12:47:18 101D6CC8 c localuser (183D&000000/0000/2142/8C:AB4F): found (123 ms) by tivusat - Rai 4
    29/11/2012 12:47:18 101D6CC8 c dvbapi: [ADD PID 0] CAID: 0100 ECM_PID: 06AA PROVID: 000030
    29/11/2012 12:47:18 101D6CC8 c dvbapi: [ADD PID 1] CAID: 0100 ECM_PID: 0FE2 PROVID: 000030
    29/11/2012 12:47:18 101D6CC8 c dvbapi: [ADD PID 2] CAID: 183D ECM_PID: 1046 PROVID: 000000
    29/11/2012 12:47:18 101D6CC8 c dvbapi: Found 3 ECMpids and 3 STREAMpids in PMT
    29/11/2012 12:47:18 101D6CC8 c dvbapi: New program number: 2142 (0100:2142 unknown) [pmt_list_management 3]
    29/11/2012 12:47:18 101D6CC8 c dvbapi: ERROR: Can't open device /dev/dvb/card0/ca0 (errno=16 Device or resource busy)
    29/11/2012 12:47:18 0 --- Skipped 1 duplicated log lines ---
    29/11/2012 12:47:18 101D6CC8 c dvbapi: Start descrambling PID #2 (CAID: 183D) 1
    29/11/2012 12:47:18 101D6CC8 c dvbapi: ERROR: Can't open device /dev/dvb/card0/ca0 (errno=16 Device or resource busy)
    29/11/2012 12:47:18 101D6CC8 c localuser (183D&000000/0000/2142/8C:AB4F): cache1 (121 ms) by tivusat - Rai 4
    29/11/2012 12:47:25 101E1D40 c encrypted camd35-client 192.168.0.6 granted (localTivusat, au=on (1 reader))
    29/11/2012 12:47:25 101D6CC8 c dvbapi: ERROR: Can't open device /dev/dvb/card0/ca0 (errno=16 Device or resource busy)
    29/11/2012 12:47:25 0 --- Skipped 1 duplicated log lines ---
    29/11/2012 12:47:25 101D6CC8 c localuser (183D&000000/0000/2142/8C:6C62): found (156 ms) by tivusat - Rai 4
    29/11/2012 12:47:25 101D6CC8 c localuser (183D&000000/0000/2142/8C:6C62): cache2 (160 ms) by tivusat - Rai 4
    29/11/2012 12:47:25 101E1D40 c localTivusat emm-request sent ( reader=tivusat, caid=183D, auprovid=005411)
    29/11/2012 12:47:25 101E1D40 c localTivusat (183D&000000/0000/2142/8C:6C62): cache2 (159 ms) by tivusat - Rai 4
    29/11/2012 12:47:25 101CDF60 r tivusat [nagra] localuser emmtype=shared, len=142, idx=0, cnt=1: written (408 ms)
    29/11/2012 12:47:42 101D6CC8 c dvbapi: ERROR: Can't open device /dev/dvb/card0/ca0 (errno=16 Device or resource busy)
    29/11/2012 12:47:42 0 --- Skipped 1 duplicated log lines ---
    29/11/2012 12:47:42 101D6CC8 c localuser (183D&000000/0000/2142/8C:6832): found (139 ms) by tivusat - Rai 4
    29/11/2012 12:47:42 101E1D40 c localTivusat (183D&000000/0000/2142/8C:6832): cache2 (142 ms) by tivusat - Rai 4
    29/11/2012 12:47:42 101D6CC8 c localuser (183D&000000/0000/2142/8C:6832): cache2 (144 ms) by tivusat - Rai 4
     
    #9
  10. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.242
    Punkte für Erfolge:
    113
    AW: Aiuto per come utilizzare Tivusat con L-Line

    Postami perfavore tutte le configs. Cosa e /dev/dvb/card0/ca0???
     
    #10
  11. cdlr1be
    Offline

    cdlr1be Newbie

    Registriert:
    7. November 2009
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Aiuto per come utilizzare Tivusat con L-Line

    Le connfig sono questi e altro ( Le avevo messi nel post con il Log sopra )
    Se hai bisogno altro, fallo sapere

    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938

    [global]
    logfile = /var/log/oscam.log
    cachedelay = 120
    nice = -19
    maxlogsize = 50
    preferlocalcards = 1

    [cs357x]
    port = 14002
    serverip = 192.168.0.6
    suppresscmd08 = 1

    [dvbapi]
    enabled = 1
    au = 1
    user = localuser
    boxtype = dreambox

    [monitor]
    port = 989
    nocrypt = 0.0.0.0-255.255.255.255
    monlevel = 4
    appendchaninfo = 1

    [webif]
    httpport = 9189
    httpuser = XXXXX
    httppwd = XXXXXXXXXX
    httphelplang = fr
    httprefresh = 10
    httpallowed = 0.0.0.0-255.255.255.255
    appendchaninfo = 1

    # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938

    [ reader]
    label = tivusat
    protocol = internal
    device = /dev/sci0
    caid = 183D
    rsakey = A92DA………64B5
    detect = cd
    mhz = 500
    cardmhz = 368
    group = 2
    emmcache = 1,1,2
    blockemm-unknown = 1
    blockemm-g = 1
    auprovid = 005411

    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938


    [account]
    user = localTivusat
    pwd = tivusat
    caid = 183D
    au = tivusat
    group = 2
    ident = 183D:000000

    [account]
    user = localuser
    description = dvbapi
    caid = 183D
    au = tivusat
    group = 2
    ident = 183D:000000

    Nello CCam.cfg

    L: 192.168.0.6 14002 Tivusat tivusat 183D 000000 256
     
    #11
  12. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.242
    Punkte für Erfolge:
    113
    AW: Aiuto per come utilizzare Tivusat con L-Line

    Metti cosi:

    [global]
    logfile = /var/log/oscam.log
    cachedelay = 120
    nice = -1
    maxlogsize = 512
    preferlocalcards = 1

    [cs357x]
    port = 14002
    serverip = 192.168.0.6
    suppresscmd08 = 1

    [dvbapi]
    enabled = 1
    au = 1
    user = localuser
    boxtype = dreambox

    [monitor]
    port = 989
    nocrypt = 0.0.0.0-255.255.255.255
    monlevel = 4
    appendchaninfo = 1

    [webif]
    httpport = 9189
    httpuser = XXXXX
    httppwd = XXXXXXXXXX
    httphelplang = fr
    httprefresh = 10
    httpallowed = 0.0.0.0-255.255.255.255
    appendchaninfo = 1

    # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938

    [ reader]
    label = tivusat
    protocol = internal
    device = /dev/sci0
    caid = 183D
    rsakey = A92DA………64B5
    detect = cd
    mhz = 500
    cardmhz = 368
    group = 2
    emmcache = 1,1,2
    blockemm-unknown = 1
    blockemm-g = 1
    auprovid = 005411

    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7938


    [account]
    user = localTivusat
    pwd = tivusat
    caid = 183D
    au = tivusat
    group = 2
    ident = 183D:000000,005411

    [account]
    user = localuser
    description = dvbapi
    caid = 183D
    au = tivusat
    group = 2
    ident = 183D:000000,005411

    Nello CCam.cfg

    L: 192.168.0.6 14002 localTivusat tivusat 183D 000000 256
    L: 192.168.0.6 14002 localTivusat tivusat 183D 005411 256
     
    #12

Direkt Antworten

Überprüfung:
Der Entwurf wurde gespeichert Der Entwurf wurde gelöscht

Diese Seite empfehlen

OK Mehr information

Diese Seite verwendet Cookies. Mit Ihrem Klick auf OK stimmen Sie der Verwendung von Cookies zu. Andernfalls ist die Funktionalität dieser Website beschränkt.