1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Talk Original Dreambox 800c hd PVR startet nicht durch

Dieses Thema im Forum "Dreambox 800 HD" wurde erstellt von dibschi, 19. Januar 2013.

  1. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    [TABLE="width: 100%"]

    Original Dreambox 800c hd PVR startet nicht durch
    [TD="align: right"][/TD]
    [/TABLE]
    [HR][/HR] Original Dreambox 800c hd PVR bootet nicht durch
    habe umgestellt auf sat der tuner funktioniert in einer anderen box liegt es denn am Tuner ?ich hoffe mir kann jemand helfen
    versuche es seit wochen sie zum laufen zu bringen hier mein bootlog dort bleibt sie am schluß stehen der bootbalken steht beim b von booting....

    ich habe bereits über 20 verschiedene images versucht per seriell und web geflasht


    PHP:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.19 14:49:46 =~=~=~=~=~=~=~=~=~=~=~=
    sf
    (c2007,2008 Dream Multimedia GmbHAll rights reserved.

    Dreambox D M800FIRST STAGE 1.01(0x133/high) {BO23456}
    [
    m2ND STAGE OKbuild #84 (2011-09-02)

    0.000  BCM board setup
    0.002  
    fp init
    0.003  
    ca init
    0.882  
    load config
    0.910  
    config loaded.
     * 
    press [Sto enter setup
    OLED found
    !
    lcdBOOT #84
     
    read config file: /boot/secondstage.conf
    detected jffs2 blocksize
    16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS
    :   .  | / - \ | / - \   done.find_inode failed for name=secondstage.confloadFailed to find  inode failed to open /boot/secondstage.conf
     
    failed to open /cf/autorun.bat
    lcd
    : /flash/bootlogo.elf
    bootlogo size
    285065
    no HDMI device detected
    no HDMI mode available
    reverting to 720p
    using 1280x720p 
    (60.00 Hz)
    HDMI
    using colorspace
    0
    create surface 1280 720
    Using the Small jpeg decoder library
    Copyright (c2006Luc Saillard <luc@saillard.org>
    parsing JPEG header..
    Virtual FB Size1280x720
    lcd
    : /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.4-dm800 (ghost@rabbit) (gcc version 4.4.3 (GCC) ) #1 Tue Mar 27 12:15:44 UTC 2012
    Fetching vars from bootloader... none presentusing defaults.
    board_init_onceregval=44ac6502ddr_strap=34 chipspci_size=2
    Detected 256 MB on board
    <4>WARNINGread invalid MAC address ff:ff:ff:ff:ff:ff from flash 0xbffff824
    Default command line 
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    2 831ffebc 83029b34
    g_board_RAM_size
    =256MB
    Options
    sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is
    00020000
    Determined physical RAM map
    :
     
    memory10000000 00000000 (usable)
    ---> 
    memsize from bootloader148
    User
    -defined physical RAM map:
    node [0000000009400000RAM]
    node [0940000006c00000RSVD]
    <
    5>Reserving 108 MB upper memory starting at 09400000
    <7>On node 0 totalpages65536
    <7>  DMA zone65536 pagesLIFO batch:15
    Built 1 zonelists
    .  Total pages65536
    <5>Kernel command lineconsole=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw 
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000
    [4294667.296000Primary instruction cache 32kBphysically tagged2-waylinesize 16 bytes.

    [
    4294667.296000Primary data cache 32kB2-waylinesize 16 bytes.

    [
    4294667.296000Synthesized TLB refill handler (20 instructions).

    [
    4294667.296000Synthesized TLB load handler fastpath (32 instructions).

    [
    4294667.296000Synthesized TLB store handler fastpath (32 instructions).

    [
    4294667.296000Synthesized TLB modify handler fastpath (31 instructions).

    [
    4294667.296000timer irq 67 end 57

    [4294667.296000PID hash table entries2048 (order118192 bytes)

    [
    4294667.296000Found MIPS counter frequency149 Mhz

    [4294667.296000Using 148.501 MHz high precision timer.

    [
    4294667.296000Consolecolour dummy device 80x25

    [4294667.296000################## brcm_serial_console_init, sercon=80307da0

    [4294667.369000Dentry cache hash table entries32768 (order5131072 bytes)

    [
    4294667.378000Inode-cache hash table entries16384 (order465536 bytes)

    [
    4294667.412000Memory145536k/262144k available (2703k kernel code116436k reserved601k data128k init0k highmem)

    [
    4294667.446000Mount-cache hash table entries512

    [4294667.451000Checking for 'wait' instruction...  available.

    [
    4294667.461000NETRegistered protocol family 16

    [4294667.467000registering PCI controller with io_map_base unset

    [
    4294667.473000registering PCI controller with io_map_base unset

    [
    4294667.481000SCSI subsystem initialized

    [4294667.485000usbcoreregistered new driver usbfs

    [4294667.490000usbcoreregistered new driver hub

    [4294667.496000SATAPrimary Bus Master Status Register offset b0520000 00000300 b0520300

    [4294667.505000SATAbefore init Primary Bus Master Status reg 0x00000000.

    [
    4294667.512000SATAafter init Primary Bus Master Status reg 0x00000020.

    [
    4294667.521000NETRegistered protocol family 2

    [4294667.535000IP route cache hash table entries2048 (order18192 bytes)

    [
    4294667.543000TCP established hash table entries8192 (order332768 bytes)

    [
    4294667.551000TCP bind hash table entries4096 (order216384 bytes)

    [
    4294667.558000TCPHash tables configured (established 8192 bind 4096)

    [
    4294667.565000TCP reno registered

    [4294667.573000JFFS2 version 2.2. (NAND) (C2001-2006 Red HatInc.

    [
    4294667.580000Initializing Cryptographic API

    [4294667.585000io scheduler noop registered

    [4294667.589000io scheduler anticipatory registered (default)

    [
    4294667.595000io scheduler deadline registered

    [4294667.599000io scheduler cfq registered

    [4294667.613000Broadcom serial driver version 1.00 (2000-11-09with SERIAL_PCI enabled

    [4294667.638000looploaded (max 8 devices)

    [
    4294667.642000Broadcom BCM7401 P31 Ethernet Network Device v2.0 Mar 27 2012 12:14:26

    [4294667.650000SUNDRY revision 74010021have IP Hdr Opt=1

    [4294667.663000Config Internal PHY Through MDIO100 MB Full-Duplex (auto-neg)

    [
    4294669.403000ata1SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42

    [4294669.412000scsi0 sata_svw

    [4294669.718000ata1SATA link down (SStatus 4 SControl 300)

    [
    4294669.723000ATAabnormal status 0x7F on port 0xb051001c

    [4294669.761000Broadcom STB NAND controller (BrcmNand Controller)

    [
    4294669.768000B4NandSelect=40000002nandConfig=04042300chipSelect=1

    [4294669.774000brcmnand_probeCS1dev_id=ad76ad76

    [4294669.779000AfterNandSelect=40000002nandConfig=04042300

    [4294669.785000NAND ConfigReg=04042300chipSize=64 MBblockSize=16Kerase_shift=e

    [4294669.793000busWidth=1pageSize=512Bpage_shift=9page_mask=000001ff

    [4294669.800000timing1 not adjusted5363444f

    [4294669.804000timing2 not adjusted00000fc6

    [4294669.809000BrcmNAND mfg ad 76 Hynix HY27US08121A (dream64MB

    [4294669.815000

    [
    4294669.815000Found NANDACC=e3000000cfg=04042300flashId=ad76ad76tim1=5363444ftim2=00000fc6

    [4294669.826000BrcmNAND version 0x0001 64MB @00000000

    [4294669.831000Found NAND chip on Chip Select 1chipSize=64MBusable size=64MBbase=14000000

    [4294669.840000ACC_CONTROL B4e3000000

    [4294669.844000page_shift=9bbt_erase_shift=14chip_shift=26phys_erase_shift=14

    [4294669.852000Brcm NAND controller version 0.1 NAND flash size 64MB @14000000

    [4294669.859000mtd->oobsize=16mtd->eccOobSize=16

    [4294669.864000brcmnand_scan:  mtd->oobsize=16

    [4294669.868000brcmnand_scanoobavail=12eccsize=512writesize=512

    [4294669.875000brcmnand_scaneccsize=512writesize=512eccsteps=1ecclevel=15eccbytes=3

    [4294669.883000brcmnand_default_bbtbbt_td bbt_main_descr

    [4294669.891000brcmnandCETStatus -> Deferred

    [4294669.895000]  numchips=1size=4000000

    [4294669.899000Creating 4 MTD partitions on "bcm7xxx-nand.0":

    [
    4294669.9050000x0000000000000000-0x0000000004000000 "complete"

    [4294669.9150000x0000000000000000-0x0000000000040000 "loader"

    [4294669.9210000x0000000000040000-0x0000000000400000 "boot partition"

    [4294669.9290000x0000000000400000-0x0000000004000000 "root partition"

    [4294669.939000ehci_hcd_brcm_initInitializing 1 EHCI controller(s)

    [
    4294669.94500010 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCIDriver (EHCI-brcm-0)

    [
    4294669.954000drivers/usb/host/ehci-brcm.cstarting brcm EHCI USB Controller

    [4294669.961000]  - USB h/w setup mode <B>

    [
    4294669.961000]  - USB power enable set for active LOW mode

    [4294669.971000brcm-ehci brcm-ehci.0BRCM EHCI

    [4294669.976000brcm-ehci brcm-ehci.0: new USB bus registeredassigned bus number 1

    [4294669.984000brcm-ehci brcm-ehci.0irq 62io mem 0x10480300

    [4294669.990000brcm-ehci brcm-ehci.0USB 0.0 startedEHCI 1.00driver 10 Dec 2004

    [4294669.998000usb usb1configuration #1 chosen from 1 choice

    [4294670.005000hub 1-0:1.0USB hub found

    [4294670.009000hub 1-0:1.02 ports detected

    [4294670.114000ohci_hcd_brcm_initInitializing 2 OHCI controller(s)

    [
    4294670.1210002005 April 22 USB 1.1 'Open' Host Controller (OHCIDriver (OHCI-brcm-0)

    [
    4294670.129000drivers/usb/host/ohci-brcm.cstarting brcm OHCI USB Controller

    [4294670.136000]  - Resetting at b0480408

    [4294670.140000] <-- brcm_start_hc

    [4294670.143000brcm-ohci-0 brcm-ohci-0.0BRCM OHCI

    [4294670.149000brcm-ohci-0 brcm-ohci-0.0: new USB bus registeredassigned bus number 2

    [4294670.157000brcm-ohci-0 brcm-ohci-0.0irq 63io mem 0x10480400

    [4294670.218000usb usb2configuration #1 chosen from 1 choice

    [4294670.224000hub 2-0:1.0USB hub found

    [4294670.228000hub 2-0:1.02 ports detected

    [4294670.3340002005 April 22 USB 1.1 'Open' Host Controller (OHCIDriver (OHCI-brcm-1)

    [
    4294670.343000drivers/usb/host/ohci-brcm.cstarting brcm OHCI USB Controller

    [4294670.350000]  - Resetting at b0480508

    [4294670.354000] <-- brcm_start_hc

    [4294670.357000brcm-ohci-1 brcm-ohci-1.1BRCM OHCI

    [4294670.362000brcm-ohci-1 brcm-ohci-1.1: new USB bus registeredassigned bus number 3

    [4294670.370000brcm-ohci-1 brcm-ohci-1.1irq 64io mem 0x10480500

    [4294670.432000usb usb3configuration #1 chosen from 1 choice

    [4294670.438000hub 3-0:1.0USB hub found

    [4294670.442000hub 3-0:1.02 ports detected

    [4294670.548000Initializing USB Mass Storage driver...

    [
    4294670.554000usbcoreregistered new driver usb-storage

    [4294670.559000USB Mass Storage support registered.

    [
    4294670.564000i2c /dev entries driver

    [4294670.568000Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).

    [
    4294670.578000ALSA device list:

    [
    4294670.581000]   No soundcards found.

    [
    4294670.585000TCP bic registered

    [4294670.589000NETRegistered protocol family 1

    [4294670.593000NETRegistered protocol family 17

    [4294677.319000] Empty flash at 0x0276a7f8 ends at 0x0276a800

    [4294678.251000VFSMounted root (jffs2 filesystem).

    [
    4294678.257000Freeing unused kernel memory128k freed


    INIT
    version 2.86 booting[4294679.430000stb_coremodule license 'Proprietary' taints kernel.

    [
    4294679.5610004007232 ms

    [
    4294679.62000056 ms27 Starting /etc/rcS.d/S02sysfs...

    [
    4294679.64200017 ms: =s

    Startting the hotplug events dispatcher
    Synthesizing the initial hotplug events
    Waiting 
    for /dev to be fully populated
    done
    [4294683.3070003663 ms29 Starting /etc/rcS.d/S03udev...

    [
    4294683.32900017 ms: =s

    [4294683.34900017 ms31 Starting /etc/rcS.d/S04bootup...

    [
    4294683.3560002 ms10

    [4294683.802000443 ms12

    [4294683.82100016 ms14

    [4294683.85300029 ms15

    [4294683.8570002 ms16

    [4294683.8610002 ms17

    [4294683.896000inputdreambox remote control (native) as /class/input/input0

    [4294683.904000inputdreambox advanced remote control (native) as /class/input/input1

    [4294683.988000inputdreambox ir keyboard as /class/input/input2

    [4294683.995000inputdreambox ir mouse as /class/input/input3

    [4294686.154000enter base initxvd 20090807vdc 20080313rap 20090430xpt 20080313

    [4294686.162000kernMemSize 148 MB

    [4294686.17700018:881021000 SMCAcontroller reset timed out

    [4294688.684000register adapter

    [4294688.687000register adapter

    [4294688.691000register adapter

    [4294688.694000register adapter

    [4294688.698000register adapter

    [4294688.702000inputdreambox front panel as /class/input/input4

    [4294688.738000HDMIno device attached

    [4294688.742000set sb to 3(2)

    [
    4294688.745000set fb to 2(-1)

    [
    4294688.748000set input to 0

    [4294688.751000set fb to 2(-1)

    [
    4294688.756000bcm_video_analog_port_setup (fmt=6)

    [
    4294688.761000SET FORMATdisplay[1], format=6

    [4294688.766000display 0 uses vbi path 1

    [4294688.770000display 1 uses vbi path 0

    [4294688.774000HDMIhotplug handler!

    [
    4294688.778000HDMIno device attached

    [4294688.781000using 50.00Hz as MonitorRefreshRate

    [4294688.786000SET FORMATdisplay[0], format=24

    [4294688.791000set fb to 2(0)

    [
    4294688.794000bcm_video_analog_port_setup (fmt=6)

    [
    4294688.799000SET FORMATdisplay[1], format=6

    [4294688.844000disable wss on display 0

    [4294688.848000disable wss on display 1

    [4294688.853000bcmfbcreating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

    [
    4294689.057000enable mad

    [4294689.125000VIDEO0set fallback framerate to 60000

    [4294689.130000VIDEO0set progressive override mode to 1

    [4294689.135000VIDEO0set streamtype!

    [
    4294689.139000set MPEG2

    [4294689.142000sw rave disabled!

    [
    4294689.151000sync is off so we enable it

    [4294689.155000playback!

    [
    4294689.158000total video delay(0 ms)

    [
    4294689.169000VIDEO0start decode

    [4294689.173000flush video decoder

    [4294689.176000VIDEO0 got pts failed !!!! (ret 0)

     
    (
    c2007,2008 Dream Multimedia GmbHAll rights reserved.

    Dreambox D M800FIRST STAGE 1.01(0x133/high) {BO23456}
    [
    m2ND STAGE OKbuild #84 (2011-09-02)

    0.000  BCM board setup
    0.002  
    fp init
    0.003  
    ca init
    0.882  
    load config
    0.910  
    config loaded.
     * 
    press [Sto enter setup
    OLED found
    !
    lcdBOOT #84
     
    read config file: /boot/secondstage.conf
    detected jffs2 blocksize
    16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS
    :   .  | / - \ | / - \   done.find_inode failed for name=secondstage.confloadFailed to find  inode failed to open /boot/secondstage.conf
     
    failed to open /cf/autorun.bat
    lcd
    : /flash/bootlogo.elf
    bootlogo size
    285065
    no HDMI device detected
    no HDMI mode available
    reverting to 720p
    using 1280x720p 
    (60.00 Hz)
    HDMI
    using colorspace
    0
    create surface 1280 720
    Using the Small jpeg decoder library
    Copyright (c2006Luc Saillard <luc@saillard.org>
    parsing JPEG header..
    Virtual FB Size1280x720
    lcd
    : /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.4-dm800 (ghost@rabbit) (gcc version 4.4.3 (GCC) ) #1 Tue Mar 27 12:15:44 UTC 2012
    Fetching vars from bootloader... none presentusing defaults.
    board_init_onceregval=44ac6502ddr_strap=34 chipspci_size=2
    Detected 256 MB on board
    <4>WARNINGread invalid MAC address ff:ff:ff:ff:ff:ff from flash 0xbffff824
    Default command line 
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    2 831ffebc 83029b34
    g_board_RAM_size
    =256MB
    Options
    sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is
    00020000
    Determined physical RAM map
    :
     
    memory10000000 00000000 (usable)
    ---> 
    memsize from bootloader148
    User
    -defined physical RAM map:
    node [0000000009400000RAM]
    node [0940000006c00000RSVD]
    <
    5>Reserving 108 MB upper memory starting at 09400000
    <7>On node 0 totalpages65536
    <7>  DMA zone65536 pagesLIFO batch:15
    Built 1 zonelists
    .  Total pages65536
    <5>Kernel command lineconsole=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw 
    before init RAC 0x02a00000 0x00000000
    after init RAC 0x02a0000f 0x0fff0000
    [4294667.296000Primary instruction cache 32kBphysically tagged2-waylinesize 16 bytes.

    [
    4294667.296000Primary data cache 32kB2-waylinesize 16 bytes.

    [
    4294667.296000Synthesized TLB refill handler (20 instructions).

    [
    4294667.296000Synthesized TLB load handler fastpath (32 instructions).

    [
    4294667.296000Synthesized TLB store handler fastpath (32 instructions).

    [
    4294667.296000Synthesized TLB modify handler fastpath (31 instructions).

    [
    4294667.296000timer irq 67 end 57

    [4294667.296000PID hash table entries2048 (order118192 bytes)

    [
    4294667.296000Found MIPS counter frequency149 Mhz

    [4294667.296000Using 148.501 MHz high precision timer.

    [
    4294667.296000Consolecolour dummy device 80x25

    [4294667.296000################## brcm_serial_console_init, sercon=80307da0

    [4294667.369000Dentry cache hash table entries32768 (order5131072 bytes)

    [
    4294667.378000Inode-cache hash table entries16384 (order465536 bytes)

    [
    4294667.412000Memory145536k/262144k available (2703k kernel code116436k reserved601k data128k init0k highmem)

    [
    4294667.446000Mount-cache hash table entries512

    [4294667.451000Checking for 'wait' instruction...  available.

    [
    4294667.461000NETRegistered protocol family 16

    [4294667.467000registering PCI controller with io_map_base unset

    [
    4294667.473000registering PCI controller with io_map_base unset

    [
    4294667.481000SCSI subsystem initialized

    [4294667.485000usbcoreregistered new driver usbfs

    [4294667.490000usbcoreregistered new driver hub

    [4294667.496000SATAPrimary Bus Master Status Register offset b0520000 00000300 b0520300

    [4294667.505000SATAbefore init Primary Bus Master Status reg 0x00000000.

    [
    4294667.512000SATAafter init Primary Bus Master Status reg 0x00000020.

    [
    4294667.521000NETRegistered protocol family 2

    [4294667.535000IP route cache hash table entries2048 (order18192 bytes)

    [
    4294667.543000TCP established hash table entries8192 (order332768 bytes)

    [
    4294667.551000TCP bind hash table entries4096 (order216384 bytes)

    [
    4294667.558000TCPHash tables configured (established 8192 bind 4096)

    [
    4294667.565000TCP reno registered

    [4294667.573000JFFS2 version 2.2. (NAND) (C2001-2006 Red HatInc.

    [
    4294667.580000Initializing Cryptographic API

    [4294667.585000io scheduler noop registered

    [4294667.589000io scheduler anticipatory registered (default)

    [
    4294667.595000io scheduler deadline registered

    [4294667.599000io scheduler cfq registered

    [4294667.613000Broadcom serial driver version 1.00 (2000-11-09with SERIAL_PCI enabled

    [4294667.638000looploaded (max 8 devices)

    [
    4294667.642000Broadcom BCM7401 P31 Ethernet Network Device v2.0 Mar 27 2012 12:14:26

    [4294667.650000SUNDRY revision 74010021have IP Hdr Opt=1

    [4294667.663000Config Internal PHY Through MDIO100 MB Full-Duplex (auto-neg)

    [
    4294669.320000ata1SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42

    [4294669.328000scsi0 sata_svw

    [4294669.635000ata1SATA link down (SStatus 4 SControl 300)

    [
    4294669.640000ATAabnormal status 0x7F on port 0xb051001c

    [4294669.678000Broadcom STB NAND controller (BrcmNand Controller)

    [
    4294669.685000B4NandSelect=40000002nandConfig=04042300chipSelect=1

    [4294669.691000brcmnand_probeCS1dev_id=ad76ad76

    [4294669.696000AfterNandSelect=40000002nandConfig=04042300

    [4294669.702000NAND ConfigReg=04042300chipSize=64 MBblockSize=16Kerase_shift=e

    [4294669.710000busWidth=1pageSize=512Bpage_shift=9page_mask=000001ff

    [4294669.717000timing1 not adjusted5363444f

    [4294669.721000timing2 not adjusted00000fc6

    [4294669.726000BrcmNAND mfg ad 76 Hynix HY27US08121A (dream64MB

    [4294669.732000

    [
    4294669.732000Found NANDACC=e3000000cfg=04042300flashId=ad76ad76tim1=5363444ftim2=00000fc6

    [4294669.743000BrcmNAND version 0x0001 64MB @00000000

    [4294669.748000Found NAND chip on Chip Select 1chipSize=64MBusable size=64MBbase=14000000

    [4294669.757000ACC_CONTROL B4e3000000

    [4294669.761000page_shift=9bbt_erase_shift=14chip_shift=26phys_erase_shift=14

    [4294669.769000Brcm NAND controller version 0.1 NAND flash size 64MB @14000000

    [4294669.776000mtd->oobsize=16mtd->eccOobSize=16

    [4294669.781000brcmnand_scan:  mtd->oobsize=16

    [4294669.785000brcmnand_scanoobavail=12eccsize=512writesize=512

    [4294669.792000brcmnand_scaneccsize=512writesize=512eccsteps=1ecclevel=15eccbytes=3

    [4294669.800000brcmnand_default_bbtbbt_td bbt_main_descr

    [4294669.808000brcmnandCETStatus -> Deferred

    [4294669.812000]  numchips=1size=4000000

    [4294669.816000Creating 4 MTD partitions on "bcm7xxx-nand.0":

    [
    4294669.8220000x0000000000000000-0x0000000004000000 "complete"

    [4294669.8320000x0000000000000000-0x0000000000040000 "loader"

    [4294669.8380000x0000000000040000-0x0000000000400000 "boot partition"

    [4294669.8460000x0000000000400000-0x0000000004000000 "root partition"

    [4294669.856000ehci_hcd_brcm_initInitializing 1 EHCI controller(s)

    [
    4294669.86200010 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCIDriver (EHCI-brcm-0)

    [
    4294669.871000drivers/usb/host/ehci-brcm.cstarting brcm EHCI USB Controller

    [4294669.878000]  - USB h/w setup mode <B>

    [
    4294669.878000]  - USB power enable set for active LOW mode

    [4294669.888000brcm-ehci brcm-ehci.0BRCM EHCI

    [4294669.893000brcm-ehci brcm-ehci.0: new USB bus registeredassigned bus number 1

    [4294669.901000brcm-ehci brcm-ehci.0irq 62io mem 0x10480300

    [4294669.907000brcm-ehci brcm-ehci.0USB 0.0 startedEHCI 1.00driver 10 Dec 2004

    [4294669.915000usb usb1configuration #1 chosen from 1 choice

    [4294669.922000hub 1-0:1.0USB hub found

    [4294669.926000hub 1-0:1.02 ports detected

    [4294670.031000ohci_hcd_brcm_initInitializing 2 OHCI controller(s)

    [
    4294670.0380002005 April 22 USB 1.1 'Open' Host Controller (OHCIDriver (OHCI-brcm-0)

    [
    4294670.046000drivers/usb/host/ohci-brcm.cstarting brcm OHCI USB Controller

    [4294670.053000]  - Resetting at b0480408

    [4294670.057000] <-- brcm_start_hc

    [4294670.060000brcm-ohci-0 brcm-ohci-0.0BRCM OHCI

    [4294670.065000brcm-ohci-0 brcm-ohci-0.0: new USB bus registeredassigned bus number 2

    [4294670.074000brcm-ohci-0 brcm-ohci-0.0irq 63io mem 0x10480400

    [4294670.135000usb usb2configuration #1 chosen from 1 choice

    [4294670.141000hub 2-0:1.0USB hub found

    [4294670.145000hub 2-0:1.02 ports detected

    [4294670.2510002005 April 22 USB 1.1 'Open' Host Controller (OHCIDriver (OHCI-brcm-1)

    [
    4294670.260000drivers/usb/host/ohci-brcm.cstarting brcm OHCI USB Controller

    [4294670.267000]  - Resetting at b0480508

    [4294670.271000] <-- brcm_start_hc

    [4294670.274000brcm-ohci-1 brcm-ohci-1.1BRCM OHCI

    [4294670.279000brcm-ohci-1 brcm-ohci-1.1: new USB bus registeredassigned bus number 3

    [4294670.287000brcm-ohci-1 brcm-ohci-1.1irq 64io mem 0x10480500

    [4294670.349000usb usb3configuration #1 chosen from 1 choice

    [4294670.355000hub 3-0:1.0USB hub found

    [4294670.359000hub 3-0:1.02 ports detected

    [4294670.465000Initializing USB Mass Storage driver...

    [
    4294670.471000usbcoreregistered new driver usb-storage

    [4294670.476000USB Mass Storage support registered.

    [
    4294670.481000i2c /dev entries driver

    [4294670.485000Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).

    [
    4294670.495000ALSA device list:

    [
    4294670.498000]   No soundcards found.

    [
    4294670.502000TCP bic registered

    [4294670.506000NETRegistered protocol family 1

    [4294670.510000NETRegistered protocol family 17

    [4294677.236000] Empty flash at 0x0276a7f8 ends at 0x0276a800

    [4294678.168000VFSMounted root (jffs2 filesystem).

    [
    4294678.174000Freeing unused kernel memory128k freed


    INIT
    version 2.86 booting[4294679.347000stb_coremodule license 'Proprietary' taints kernel.

    [
    4294679.4780004007149 ms

    [
    4294679.53700056 ms27 Starting /etc/rcS.d/S02sysfs...

    [
    4294679.56000017 ms: =s

    Startting the hotplug events dispatcher
    Synthesizing the initial hotplug events
    Waiting 
    for /dev to be fully populated
    done
    [4294683.2210003659 ms29 Starting /etc/rcS.d/S03udev...

    [
    4294683.24300017 ms: =s

    [4294683.26300017 ms31 Starting /etc/rcS.d/S04bootup...

    [
    4294683.2700002 ms10

    [4294683.716000443 ms12

    [4294683.73500017 ms14

    [4294683.76700030 ms15

    [4294683.7710002 ms16

    [4294683.7750002 ms17

    [4294683.810000inputdreambox remote control (native) as /class/input/input0

    [4294683.818000inputdreambox advanced remote control (native) as /class/input/input1

    [4294683.902000inputdreambox ir keyboard as /class/input/input2

    [4294683.909000inputdreambox ir mouse as /class/input/input3

    [4294686.075000enter base initxvd 20090807vdc 20080313rap 20090430xpt 20080313

    [4294686.084000kernMemSize 148 MB

    [4294686.09900018:803021000 SMCAcontroller reset timed out

    [4294688.606000register adapter

    [4294688.609000register adapter

    [4294688.613000register adapter

    [4294688.616000register adapter

    [4294688.620000register adapter

    [4294688.624000inputdreambox front panel as /class/input/input4

    [4294688.659000HDMIno device attached

    [4294688.663000set sb to 3(2)

    [
    4294688.666000set fb to 2(-1)

    [
    4294688.669000set input to 0

    [4294688.672000set fb to 2(-1)

    [
    4294688.677000bcm_video_analog_port_setup (fmt=6)

    [
    4294688.682000SET FORMATdisplay[1], format=6

    [4294688.687000display 0 uses vbi path 1

    [4294688.691000display 1 uses vbi path 0

    [4294688.695000HDMIhotplug handler!

    [
    4294688.699000HDMIno device attached

    [4294688.703000using 50.00Hz as MonitorRefreshRate

    [4294688.707000SET FORMATdisplay[0], format=24

    [4294688.712000set fb to 2(0)

    [
    4294688.715000bcm_video_analog_port_setup (fmt=6)

    [
    4294688.720000SET FORMATdisplay[1], format=6

    [4294688.766000disable wss on display 0

    [4294688.770000disable wss on display 1

    [4294688.774000bcmfbcreating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

    [
    4294688.977000enable mad

    [4294689.046000VIDEO0set fallback framerate to 60000

    [4294689.051000VIDEO0set progressive override mode to 1

    [4294689.057000VIDEO0set streamtype!

    [
    4294689.060000set MPEG2

    [4294689.063000sw rave disabled!

    [
    4294689.072000sync is off so we enable it

    [4294689.076000playback!

    [
    4294689.079000total video delay(0 ms)

    [
    4294689.090000VIDEO0start decode

    [4294689.094000flush video decoder

    [4294689.097000VIDEO0 got pts failed !!!! (ret 0)

    [
    4294689.558000set ac3 to downmix

    [4294689.561000set aac to downmix

    [4294689.605000VIDEO0first pts 0x0

    [4294689.621000init ALSA!

    [
    4294689.628000DVBregistering new adapter (BCM7401)

    [
    4294689.680000autodetecting NIMs...

    [
    4294689.685000ret2feid06

    [4294689.689000FoundSlot AID06 (by CA)

    [
    4294689.693000Initializing adapter 0 (Alps BSBE2-DVB-S2)

    [
    4294689.698000special BSBE2 treatment:

    [
    4294690.572000brcmnand_ctrl_verify_eccCorrectable ECC error at 00000000:14466800

    [4294690.582000CORR error was handled by SW at offset 466800HW=ffffffSW=c003c3

    [4294690.590000brcmnand_refresh_blkPerforming block refresh for correctable ECC error at 466800

    [4294690.612000brcmnand_refresh_blkblock refresh success

    [4294690.722000enable tsm0

    [4294694.272000DVBregistering adapter 0 frontend 0 (cx24116)...

    [
    4294694.314000registered vtuner vtuner0minor 60

    [4294694.319000registered vtuner vtuner1minor 59                                  
    dream up abe ich bereits auch schon versucht mit verschieden version zuletzt mit der V1.3.3.9

    dort kommt wenn ich denn bootloader als erstes rauf hau
    15:23:38 Boxtyp: DM800
    15:23:38 "defekte Sektoren wiederherstellen" aktiviert
    15:24:15 Berechne Prüfsumme...
    15:24:17 Lade Datei zur Box hoch...
    15:24:30 Die Box flasht jetzt aus dem lokalen RAM...
    15:24:30 Log: +++ 015 bad sector recovery enabled
    15:24:30 OK, Flashen war erfolgreich

    das gleiche auch beim image

    mit dem tuner BSBE2 - 401A alps
     
    #1
  2. phantom

    Nervigen User Advertisement

  3. mxer
    Offline

    mxer Moderator Digital Eliteboard Team

    Registriert:
    20. September 2008
    Beiträge:
    13.914
    Zustimmungen:
    6.219
    Punkte für Erfolge:
    113
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Mal ohne HDD und/ oder USB-Anhang versucht?
    Die 800hd hatte irgendwie Probleme, wenn da am USB was dranhing.
    Und die HDD einfach mal rausnehmen, um den Fehler besser eingrenzen zu können.
     
    #2
  4. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Es ist keine hdd angeschloßen am usb stecker ist auch nix drin

    sata ist auch weg habe die box mit offenem deckel gebootet
     
    #3
  5. chiefobrei
    Online

    chiefobrei Moderator Digital Eliteboard Team

    Registriert:
    25. Mai 2009
    Beiträge:
    13.358
    Zustimmungen:
    3.566
    Punkte für Erfolge:
    113
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Bootet die Box ohne Tuner?
     
    #4
  6. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Nein sie boootet auch nicht ohne tuner
     
    #5
  7. Karl-Hein
    Offline

    Karl-Hein Elite Lord

    Registriert:
    1. Februar 2010
    Beiträge:
    14.037
    Zustimmungen:
    3.734
    Punkte für Erfolge:
    0
    Ort:
    Bayern
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Flash deine Box mit Dreanup 1.3.3.9+Bad Sector Repaire !
     
    #6
  8. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Original Dreambox 800c hd PVR startet nicht durch

    ja das habe ich bereits versucht dort kommt wie oben beschrieben das hier

    15:23:38 Boxtyp: DM800
    15:23:38 "defekte Sektoren wiederherstellen" aktiviert
    15:24:15 Berechne Prüfsumme...
    15:24:17 Lade Datei zur Box hoch...
    15:24:30 Die Box flasht jetzt aus dem lokalen RAM...
    15:24:30 Log: +++ 015 bad sector recovery enabled
    15:24:30 OK, Flashen war erfolgreich
     
    #7
  9. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Original Dreambox 800c hd PVR startet nicht durch

    so hab jetzt nochmals mit dreamup V1.3.3.9 + Bad Sector Repaire gefalsht ohne tuner

    jetzt bleibt die box hier stehen

    Code:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.20 11:28:53 =~=~=~=~=~=~=~=~=~=~=~=
      Ÿf
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M800
    
    FIRST STAGE 1.01(0x133/high) {BO23456}
    [m
    
    2ND STAGE OK, build #84 (2011-09-02)
    
    0.000  - BCM board setup
    0.002  - fp init
    0.003  - ca init
    0.883  - load config
    dCA: not existent, loading defaults
    0.914  - config loaded.
     * press [S] to enter setup
    OLED found!
    lcd: BOOT #84
     - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS:   .  | / - \ | / - \  done.
    
    find_inode failed for name=secondstage.conf
    
    load: Failed to find inode
    
     - failed to open /boot/secondstage.conf
     - failed to open /cf/autorun.bat
    lcd: /flash/bootlogo.elf
    bootlogo size: 35911
    ***  BCHP: Invalid RTS setting detected. Forcing MEMC_0_CLIENT_INFO_7 (AVD_CAB_0) RR to true. Please see latest 7401 RTS documentation.
    no HDMI device detected
    no HDMI mode available, reverting to 720p
    using 1280x720p (60.00 Hz)
    create surface 1280 720
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
    parsing JPEG header..
    Virtual FB Size: 1280x720
    lcd: /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.4-dm800 (newnigma2@vs35) (gcc version 4.4.3 (GCC) ) #1 Fri Oct 7 15:08:40 UTC 2011
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line = 
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    1 831ffebc 83029b34
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 148
    User-defined physical RAM map:
    node [00000000, 09400000: RAM]
    node [09400000, 06c00000: RSVD]
    <5>Reserving 108 MB upper memory starting at 09400000
    <7>On node 0 totalpages: 65536
    <7>  DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists.  Total pages: 65536
    <5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    before init RAC 0x02a00000    0x00000000
    after init RAC 0x02a0000f    0x0fff0000
    
    - - - Aktualisiert - - -

    habe aber dieses mal das image newnigma2-release-dm800-v.3.3 draufgehauen

    - - - Aktualisiert - - -

    welches image würdet ihr mit empfehlen ??

    eventuell auch mit nem anderen bootloader ?

    ich hab kein plan mehr
     
    #8
  10. Karl-Hein
    Offline

    Karl-Hein Elite Lord

    Registriert:
    1. Februar 2010
    Beiträge:
    14.037
    Zustimmungen:
    3.734
    Punkte für Erfolge:
    0
    Ort:
    Bayern
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Dann noch einmal !
    Flash deine Box mit Dreanup 1.3.3.9 + Bad Sector Repaire + Netzwerk !
    Wenn der Flashbutton sich in Dreamup öffnet die "Box IP" in den IE und flashen !
    Box manuell rebooten !
     
    #9
  11. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Original Dreambox 800c hd PVR startet nicht durch

    jop hab ich auch schon versucht
     
    #10
  12. Matlock
    Online

    Matlock MFC Digital Eliteboard Team

    Registriert:
    18. Februar 2009
    Beiträge:
    16.601
    Zustimmungen:
    9.801
    Punkte für Erfolge:
    113
    Beruf:
    Schubkarren Beifahrer
    Ort:
    Atlanta
    AW: Original Dreambox 800c hd PVR startet nicht durch

    Hast du ein mal versucht über das Netzwerk zu flashen und geschaut in der Device Info welchen Bootloder du drauf hast, evtl solltest du diesen aktualisieren vor dem flashen des Images!

    Bist du auch sicher das es eine originale ist?
     
    #11
  13. dibschi
    Offline

    dibschi Newbie

    Registriert:
    23. April 2012
    Beiträge:
    7
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    AW: Original Dreambox 800c hd PVR startet nicht durch

    ja habe ich auch schon versucht

    also ich bin mir ziemlich sicher das es eine originale ist habe jedes kriterium überprüft was eine original ausmacht und alles passt

    ich habe sie bei ebay ersteigert

    es ist eine 800 hd c aber mit sat tuner

    einmal habe ich es geschaft das sie bootet das war allerdings schon länger her

    im moment bleibt sie hier hängen

    Code:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.01.21 00:26:55 =~=~=~=~=~=~=~=~=~=~=~=
    CLOSE requested (1)
    CLOSE requested (1)
    dynamic CA: 23 01 01 20 04 c0 a8 b2 26 21 04 ff ff ff 00 22 04 c0 a8 b2 01 27 01 0a 24 01 00 28 01 14 01 01 00 46 01 00 47 01 00 33 01 fe 32 01 00 19 01 01 18 01 01 11 01 01 10 00 13 01 00 12 00 15 01 00 14 00 17 01 05 16 13 2f 61 75 74 6f 65 78 65 63 5f 64 6d 38 30 30 2e 62 61 74 1b 01 01 1a 3c 63 6f 6e 73 6f 6c 65 3d 74 74 79 53 30 2c 31 31 35 32 30 30 20 72 6f 6f 74 3d 2f 64 65 76 2f 6d 74 64 62 6c 6f 63 6b 33 20 72 6f 6f 74 66 73 74 79 70 65 3d 6a 66 66 73 32 20 72 77 45 01 00 ff 02 00 5d
    config saved.
     
    (c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
    
    Dreambox D M800
    
    FIRST STAGE 1.01(0x133/high) {BO23456}
    
    
    2ND STAGE OK, build #84 (2011-09-02)
    
    0.000  - BCM board setup
    0.002  - fp init
    0.003  - ca init
    0.882  - load config
    0.910  - config loaded.
     * press [S] to enter setup
    OLED found!
    lcd: BOOT #84
     - read config file: /boot/secondstage.conf
    detected jffs2 blocksize: 16kb
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
    dreamupd initialized
    Scanning JFFS2 FS:   .  | / - \ | / - \ |  done.
    
    find_inode failed for name=secondstage.conf
    
    load: Failed to find inode
    
     - failed to open /boot/secondstage.conf
     - failed to open /cf/autorun.bat
    lcd: /flash/bootlogo.elf
    bootlogo size: 325559
    no HDMI device detected
    no HDMI mode available, reverting to 720p
    using 1280x720p (60.00 Hz)
    HDMI
    using colorspace: 0
    create surface 1280 720
    Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
    parsing JPEG header..
    Virtual FB Size: 1280x720
    lcd: /flash/vmlinux.gz
    <5>Linux version 2.6.18-7.4-dm800 (oozoon@oozoon) (gcc version 4.4.3 (GCC) ) #1 Sun Mar 4 16:42:44 CET 2012
    Fetching vars from bootloader... none present, using defaults.
    board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
    Detected 256 MB on board
    <4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
    Default command line = 
    root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
    2 831ffebc 83029b34
    g_board_RAM_size=256MB
    Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
    CPU revision is: 00020000
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
    ---> memsize from bootloader: 148
    User-defined physical RAM map:
    node [00000000, 09400000: RAM]
    node [09400000, 06c00000: RSVD]
    <5>Reserving 108 MB upper memory starting at 09400000
    <7>On node 0 totalpages: 65536
    <7>  DMA zone: 65536 pages, LIFO batch:15
    Built 1 zonelists.  Total pages: 65536
    <5>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
    before init RAC 0x02a00000    0x00000000
    after init RAC 0x02a0000f    0x0fff0000
    [4294667.296000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
    
    [4294667.296000] Primary data cache 32kB, 2-way, linesize 16 bytes.
    
    [4294667.296000] Synthesized TLB refill handler (20 instructions).
    
    [4294667.296000] Synthesized TLB load handler fastpath (32 instructions).
    
    [4294667.296000] Synthesized TLB store handler fastpath (32 instructions).
    
    [4294667.296000] Synthesized TLB modify handler fastpath (31 instructions).
    
    [4294667.296000] timer irq 67 end 57
    
    [4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)
    
    [4294667.296000] Found MIPS counter frequency: 149 Mhz
    
    [4294667.296000] Using 148.501 MHz high precision timer.
    
    [4294667.296000] Console: colour dummy device 80x25
    
    [4294667.296000] ################## brcm_serial_console_init, sercon=80300900
    
    [4294667.369000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    
    [4294667.378000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    
    [4294667.412000] Memory: 145536k/262144k available (2673k kernel code, 116432k reserved, 602k data, 152k init, 0k highmem)
    
    [4294667.446000] Mount-cache hash table entries: 512
    
    [4294667.451000] Checking for 'wait' instruction...  available.
    
    [4294667.474000] NET: Registered protocol family 16
    
    [4294667.479000] registering PCI controller with io_map_base unset
    
    [4294667.485000] registering PCI controller with io_map_base unset
    
    [4294667.493000] SCSI subsystem initialized
    
    [4294667.498000] usbcore: registered new driver usbfs
    
    [4294667.503000] usbcore: registered new driver hub
    
    [4294667.509000] SATA: Primary Bus Master Status Register offset = b0520000 + 00000300 = b0520300
    
    [4294667.518000] SATA: before init Primary Bus Master Status reg = 0x00000000.
    
    [4294667.525000] SATA: after init Primary Bus Master Status reg = 0x00000020.
    
    [4294667.534000] NET: Registered protocol family 2
    
    [4294667.547000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    
    [4294667.555000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    
    [4294667.563000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
    
    [4294667.570000] TCP: Hash tables configured (established 8192 bind 4096)
    
    [4294667.577000] TCP reno registered
    
    [4294667.585000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
    
    [4294667.592000] Initializing Cryptographic API
    
    [4294667.597000] io scheduler noop registered
    
    [4294667.601000] io scheduler anticipatory registered (default)
    
    [4294667.607000] io scheduler deadline registered
    
    [4294667.611000] io scheduler cfq registered
    
    [4294667.624000] Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PCI enabled
    
    [4294667.645000] loop: loaded (max 8 devices)
    
    [4294667.649000] Broadcom BCM7401 P31 Ethernet Network Device v2.0 Mar  4 2012 16:41:29
    
    [4294667.657000] SUNDRY revision = 74010021, have IP Hdr Opt=1
    
    [4294667.670000] Config Internal PHY Through MDIO: Auto-negotiation timed-out
    
    [4294669.751000] : 10 MB Half-Duplex (assumed)
    
    [4294669.761000] ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
    
    [4294669.770000] scsi0 : sata_svw
    
    [4294670.076000] ata1: SATA link down (SStatus 4 SControl 300)
    
    [4294670.081000] ATA: abnormal status 0x7F on port 0xb051001c
    
    [4294670.119000] Broadcom STB NAND controller (BrcmNand Controller)
    
    [4294670.125000] B4: NandSelect=40000002, nandConfig=04042300, chipSelect=1
    
    [4294670.132000] brcmnand_probe: CS1: dev_id=ad76ad76
    
    [4294670.137000] After: NandSelect=40000002, nandConfig=04042300
    
    [4294670.143000] NAND Config: Reg=04042300, chipSize=64 MB, blockSize=16K, erase_shift=e
    
    [4294670.151000] busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff
    
    [4294670.158000] timing1 not adjusted: 5363444f
    
    [4294670.162000] timing2 not adjusted: 00000fc6
    
    [4294670.167000] BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB
    
    [4294670.173000] 
    
    [4294670.173000] Found NAND: ACC=e3000000, cfg=04042300, flashId=ad76ad76, tim1=5363444f, tim2=00000fc6
    
    [4294670.184000] BrcmNAND version = 0x0001 64MB @00000000
    
    [4294670.189000] Found NAND chip on Chip Select 1, chipSize=64MB, usable size=64MB, base=14000000
    
    [4294670.198000] ACC_CONTROL B4: e3000000
    
    [4294670.202000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shift=14
    
    [4294670.210000] Brcm NAND controller version = 0.1 NAND flash size 64MB @14000000
    
    [4294670.217000] mtd->oobsize=16, mtd->eccOobSize=16
    
    [4294670.222000] brcmnand_scan:  mtd->oobsize=16
    
    [4294670.226000] brcmnand_scan: oobavail=12, eccsize=512, writesize=512
    
    [4294670.233000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel=15, eccbytes=3
    
    [4294670.241000] brcmnand_default_bbt: bbt_td = bbt_main_descr
    
    [4294670.249000] brcmnandCET: Status -> Deferred
    
    [4294670.253000]     numchips=1, size=4000000
    
    [4294670.257000] Creating 4 MTD partitions on "bcm7xxx-nand.0":
    
    [4294670.263000] 0x0000000000000000-0x0000000004000000 : "complete"
    
    [4294670.273000] 0x0000000000000000-0x0000000000040000 : "loader"
    
    [4294670.279000] 0x0000000000040000-0x0000000000400000 : "boot partition"
    
    [4294670.287000] 0x0000000000400000-0x0000000004000000 : "root partition"
    
    [4294670.297000] ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)
    
    [4294670.303000] 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
    
    [4294670.312000] drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
    
    [4294670.319000]  - USB h/w setup mode <B>
    
    [4294670.319000]  - USB power enable set for active LOW mode
    
    [4294670.329000] brcm-ehci brcm-ehci.0: BRCM EHCI
    
    [4294670.333000] brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
    
    [4294670.341000] brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
    
    [4294670.348000] brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
    
    [4294670.356000] usb usb1: configuration #1 chosen from 1 choice
    
    [4294670.362000] hub 1-0:1.0: USB hub found
    
    [4294670.366000] hub 1-0:1.0: 2 ports detected
    
    [4294670.472000] ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
    
    [4294670.479000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
    
    [4294670.487000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
    
    [4294670.494000]  - Resetting at b0480408
    
    [4294670.498000] <-- brcm_start_hc
    
    [4294670.501000] brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
    
    [4294670.506000] brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2
    
    [4294670.515000] brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
    
    [4294670.576000] usb usb2: configuration #1 chosen from 1 choice
    
    [4294670.582000] hub 2-0:1.0: USB hub found
    
    [4294670.587000] hub 2-0:1.0: 2 ports detected
    
    [4294670.692000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
    
    [4294670.701000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
    
    [4294670.708000]  - Resetting at b0480508
    
    [4294670.712000] <-- brcm_start_hc
    
    [4294670.715000] brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
    
    [4294670.720000] brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3
    
    [4294670.728000] brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500
    
    [4294670.790000] usb usb3: configuration #1 chosen from 1 choice
    
    [4294670.796000] hub 3-0:1.0: USB hub found
    
    [4294670.801000] hub 3-0:1.0: 2 ports detected
    
    [4294670.906000] Initializing USB Mass Storage driver...
    
    [4294670.912000] usbcore: registered new driver usb-storage
    
    [4294670.917000] USB Mass Storage support registered.
    
    [4294670.922000] i2c /dev entries driver
    
    [4294670.926000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
    
    [4294670.936000] ALSA device list:
    
    [4294670.939000]   No soundcards found.
    
    [4294670.943000] TCP bic registered
    
    [4294670.946000] NET: Registered protocol family 1
    
    [4294670.951000] NET: Registered protocol family 17
    
    [4294670.958000] Freeing unused kernel memory: 152k freed
    
    
    Jumpin'Jack Flash initramfs by gutemine Version 2.5
    
    Kernel commandline: console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
    
    
    Jumpin Flash ...
    
    [4294678.185000] Empty flash at 0x02a0791c ends at 0x02a07a00
    
    Continue booting...
    
    INIT: version 2.86 booting
    
    [4294680.193000] stb_core: module license 'Proprietary' taints kernel.
    
    [4294680.323000] 4007994 ms: 
    
    [4294680.382000] 56 ms: 28 Starting /etc/rcS.d/S02sysfs...
    
    [4294680.404000] 17 ms: =s
    
    Startting the hotplug events dispatcher
    Synthesizing the initial hotplug events
    Waiting for /dev to be fully populated
    done
    [4294684.007000] 3601 ms: 31 Starting /etc/rcS.d/S03udev...
    
    [4294684.029000] 16 ms: =s
    
    [4294684.049000] 17 ms: 34 Starting /etc/rcS.d/S04bootup...
    
    [4294684.056000] 2 ms: 10
    
    [4294684.504000] 446 ms: 12
    
    [4294684.523000] 17 ms: 14
    
    [4294684.554000] 28 ms: 15
    
    [4294684.558000] 1 ms: 16
    
    [4294684.562000] 1 ms: 17
    
    [4294684.596000] input: dreambox remote control (native) as /class/input/input0
    
    [4294684.604000] input: dreambox advanced remote control (native) as /class/input/input1
    
    [4294684.664000] input: dreambox ir keyboard as /class/input/input2
    
    [4294684.671000] input: dreambox ir mouse as /class/input/input3
    
    [4294685.135000] usbcore: registered new driver r871x_usb_drv
    
    [4294687.115000] enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313
    
    [4294687.123000] kernMemSize : 148 MB
    
    [4294687.138000] 19:842015000 SMCA: controller reset timed out
    
    [4294689.644000] register adapter
    
    [4294689.647000] register adapter
    
    [4294689.651000] register adapter
    
    [4294689.654000] register adapter
    
    [4294689.658000] register adapter
    
    [4294689.662000] input: dreambox front panel as /class/input/input4
    
    [4294689.694000] HDMI: no device attached
    
    [4294689.698000] set sb to 3(2)
    
    [4294689.701000] set fb to 2(-1)
    
    [4294689.704000] set input to 0
    
    [4294689.707000] set fb to 2(-1)
    
    [4294689.712000] bcm_video_analog_port_setup (fmt=6)
    
    [4294689.717000] SET FORMAT: display[1], format=6
    
    [4294689.722000] display 0 uses vbi path 1
    
    [4294689.726000] display 1 uses vbi path 0
    
    [4294689.730000] HDMI: hotplug handler!
    
    [4294689.734000] HDMI: no device attached
    
    [4294689.737000] using 50.00Hz as MonitorRefreshRate
    
    [4294689.742000] SET FORMAT: display[0], format=24
    
    [4294689.747000] set fb to 2(0)
    
    [4294689.750000] bcm_video_analog_port_setup (fmt=6)
    
    [4294689.755000] SET FORMAT: display[1], format=6
    
    [4294689.800000] disable wss on display 0
    
    [4294689.804000] disable wss on display 1
    
    [4294689.809000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    
    [4294690.013000] enable mad
    
    [4294690.081000] VIDEO0: set fallback framerate to 60000
    
    [4294690.086000] VIDEO0: set progressive override mode to 1
    
    [4294690.091000] VIDEO0: set streamtype!
    
    [4294690.095000] set MPEG2
    
    [4294690.097000] sw rave disabled!
    
    [4294690.107000] sync is off so we enable it
    
    [4294690.111000] playback!
    
    [4294690.114000] total video delay: 0 (0 ms)
    
    [4294690.125000] VIDEO0: start decode
    
    [4294690.129000] flush video decoder
    
    [4294690.132000] VIDEO0 got pts failed !!!! (ret 0)
    
    [4294690.592000] set ac3 to downmix
    
    [4294690.595000] set aac to downmix
    
    [4294690.640000] VIDEO0: first pts 0x0
    
    [4294690.655000] init ALSA!
    
    [4294690.662000] DVB: registering new adapter (BCM7401)
    
    [4294690.710000] autodetecting NIMs...
    
    [4294690.714000] ret: -145, feid: 00
    
    [4294690.718000] registered vtuner vtuner0, minor 60
    
    [4294690.724000] registered vtuner vtuner1, minor 59
    
    [4294692.868000] VIDEO0: stop decode
    
    [4294692.872000] no decoder left in sync handling so disable xpt_sync
    
    [4294693.608000] NTFS driver 2.1.27 [Flags: R/O MODULE].
    
    [4294693.968000] -RT73-<7>usb_rtusb_init-->
    
    [4294693.973000] usbcore: registered new driver rt73
    
    [4294694.139000] usbcore: registered new driver hiddev
    
    [4294694.145000] usbcore: registered new driver usbhid
    
    [4294694.150000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    
    [4294694.433000] 
    
    [4294694.435000]  _____     ____    _    ____
    
    [4294694.439000] |__  /   _|  _ \  / \  / ___|
    
    [4294694.444000]   / / | | | | | |/ _ \ \___ \
    
    [4294694.449000]  / /| |_| | |_| / ___ \ ___) |
    
    [4294694.453000] /____\__, |____/_/   \_\____/
    
    [4294694.457000]      |___/
    
    [4294694.460000] ZD1211B - version 2.22.0.0-development
    
    [4294694.466000] usbcore: registered new driver zd1211b
    
    [4294694.495000] 9930 ms: 18
    
    [4294694.516000] 18 ms: 19
    
    [4294694.605000] 86 ms: 20
    
    [4294694.628000] 20 ms: 21
    
    [4294694.632000] 2 ms: 22
    
    [4294694.636000] 2 ms: 23
    
    [4294694.663000] VIDEO0: set blank to 0
    
    [4294694.782000] sync is off so we enable it
    
    [4294694.786000] playback!
    
    [4294694.788000] total video delay: 0 (0 ms)
    
    [4294695.062000] VIDEO0: start decode
    
    [4294695.076000] flush video decoder
    
    [4294695.760000] VIDEO0: first pts 0x0
    
    [4294695.764000] VIDEO0: framerate changed 3
    
    [4294695.768000] VIDEO0: resolution changed (1280 720)
    
    [4294695.773000] VIDEO0: aspect changed 3
    
    [4294695.781000] set current avs auto aspect to 16:9
    
    [4294695.785000] disable wss on display 0
    
    [4294695.789000] disable wss on display 1
    
    [4294695.794000] set current avs auto aspect to 16:9
    
    [4294695.798000] disable wss on display 0
    
    [4294695.803000] disable wss on display 1
    
    [4294695.807000] set sb to 3(1)
    
    [4294695.840000] VIDEO0: set blank to 0
    
    [4294695.873000] VIDEO0: stop decode
    
    [4294695.876000] VIDEO0: set blank to 0
    
    [4294695.880000] no decoder left in sync handling so disable xpt_sync
    
    [4294696.208000] brcmnand_ctrl_verify_ecc: Correctable ECC error at 00000000:15756a00
    
    [4294696.218000] CORR error was handled by SW at offset 1756a00, HW=fffff0, SW=f0f0f0
    
    [4294696.226000] brcmnand_refresh_blk: Performing block refresh for correctable ECC error at 1756ab0
    
    [4294696.247000] brcmnand_refresh_blk: block refresh success
    
    [4294696.307000] brcmnand_handle_false_read_ecc_unc_errors: Uncorrectable error at offset 1406000
    
    [4294696.316000] Data:
    
    [4294696.318000] 
    
    [4294696.318000] 0000: be0287d8 838c7119 a770fd31 fa8fe436 6b4fe0dd 006e59fa 62be1b79 0e5c9b43
    
    [4294696.329000] 0020: 70881d06 cc5be1ef 538b3744 bd1207e6 5ecb5af6 44a07916 8fef09d1 60e2257f
    
    [4294696.337000] 0040: bc9f3877 c6ddc722 111f4e88 bb95f332 17cb0647 3c26a5b8 5c2bfa23 ef088b49
    
    [4294696.346000] 0060: 58cb3cea 736ee471 adfe5c9d 03ccbe97 f3fbd2e2 1d83773c 85f7b5c5 5bc07f80
    
    [4294696.355000] 0080: 059cd149 71bfb178 15f02ae0 35acb8c5 fa7d7bc2 abc4e0c5 e0dd2bf1 e8ff7b8b
    
    [4294696.364000] 00a0: c7377ae3 cae4b83f 80c7f971 be0df03e 016f7d42 dc1f737f 858abc06 8df256cc
    
    [4294696.372000] 00c0: e9278cff 42fd15f2 db78088a dc292bea f917ab5f 43ff573e 18562b78 bf97e292
    
    [4294696.381000] 00e0: 2727f08a 3d2b5487 e0fd910f fe1540c8 f6020418 00cf8fb2 5cffffff 851901e0
    
    [4294696.390000] 0100: 37000000 c186e967 ae020000 d4030000 d6030000 00000000 0f0a0000 523d3e32
    
    [4294696.398000] 0120: 6b1d4cb9 6c696268 6973746f 72792e73 6f2e35ff 851902e0 55000000 e7cb5270
    
    [4294696.407000] 0140: d6030000 01000000 ffa10000 00000000 11000000 00000000 00000000 00000000
    
    [4294696.416000] 0160: 00000000 11000000 11000000 00000000 553fdf26 e82ee689 6c696268 6973746f
    
    [4294696.425000] 0180: 72792e73 6f2e352e 32ffffff 851901e0 39000000 f2f13687 ae020000 d5030000
    
    [4294696.433000] 01a0: d7030000 00000000 11080000 6e14b1b4 553fdf26 6c696268 6973746f 72792e73
    
    [4294696.442000] 01c0: 6f2e352e 32ffffff 851902e0 bc060000 e7b9a8df d7030000 01000000 ed810000
    
    [4294696.451000] 01e0: 00000000 8c680000 00000000 00000000 00000000 00000000 78060000 00100000
    
    [4294696.460000] Spare Area
    
    [4294696.463000]  ffffffff ffffa569 9affffff ffffffff
    
    [4294696.468000] brcmnand_post_mortem_dump at offset 1406000
    
    [4294696.473000] Call Trace:
    
    [4294696.476000] [<8000c2f4>] dump_stack+0x20/0x50
    
    [4294696.481000] [<801be2a8>] brcmnand_post_mortem_dump+0x48/0x114
    
    [4294696.487000] [<801bf898>] brcmnand_ctrl_posted_read_cache+0x77c/0x1048
    
    [4294696.494000] [<801ba6f4>] brcmnand_read_page+0xf0/0x27c
    
    [4294696.499000] [<801bba00>] brcmnand_do_read_ops+0xd4/0x254
    
    [4294696.506000] [<801be670>] brcmnand_read+0x124/0x8a0
    
    [4294696.511000] [<801b5644>] part_read+0x90/0x174
    
    [4294696.515000] [<80114c3c>] jffs2_flash_read+0x74/0x2b4
    
    [4294696.521000] [<8010a064>] jffs2_do_read_inode_internal+0x398/0x16cc
    
    [4294696.528000] [<8010b520>] jffs2_do_read_inode+0x90/0x220
    
    [4294696.533000] [<80113548>] jffs2_read_inode+0x78/0x3f0
    
    [4294696.538000] [<80105a58>] jffs2_lookup+0x1f0/0x234
    
    [4294696.544000] [<800842a4>] do_lookup+0x184/0x1b8
    
    [4294696.549000] [<80085ee4>] __link_path_walk+0x6ec/0x1094
    
    [4294696.554000] [<80086940>] link_path_walk+0xb4/0x1c4
    
    [4294696.559000] [<80086ef4>] do_path_lookup+0xb8/0x2ac
    
    [4294696.565000] [<80087b74>] __user_walk_fd+0x44/0x78
    
    [4294696.570000] [<8007f880>] vfs_stat_fd+0x24/0x60
    
    [4294696.575000] [<8007f9c0>] sys_stat64+0x20/0x48
    
    [4294696.579000] [<8000d76c>] stack_done+0x20/0x3c
    
    [4294696.585000] 
    
    [4294696.586000] NAND registers snapshot 
    
    [4294696.590000] 
    
    [4294696.590000] 00002800:  00000001  01000000  15406000  00000000
    
    [4294696.598000] 00002810:  40000002<1>Data bus error, epc == 801b9e98, ra == 801be304
    
    [4294696.602000] Oops[#1]:
    
    [4294696.602000] Cpu 0
    
    [4294696.602000] $ 0   : 00000000 10008400 00000001 000028bc
    
    [4294696.602000] $ 4   : 802d0000 b04001b8 0000000a 10008401
    
    [4294696.602000] $ 8   : b04001b8 0000000a b04001bc 0000001c
    
    [4294696.602000] $12   : 0000001c 00000018 000f423f 0000000a
    
    [4294696.602000] $16   : b0002814 00002814 00000005 40000002
    
    [4294696.602000] $20   : 00000020 0000281c 802cd088 802ac110
    
    [4294696.602000] $24   : 0000000d 00000000                  
    
    [4294696.602000] $28   : 88272000 882738e0 802cd080 801be304
    
    [4294696.602000] Hi    : 0247fc00
    
    [4294696.602000] Lo    : 01fefc80
    
    [4294696.602000] epc   : 801b9e98 brcmnand_ctrl_read+0x68/0x94     Tainted: P     
    
    [4294696.602000] ra    : 801be304 brcmnand_post_mortem_dump+0xa4/0x114
    
    [4294696.602000] Status: 10008403    KERNEL EXL IE 
    
    [4294696.602000] Cause : 0080001c
    
    [4294696.602000] PrId  : 00020000
    
    [4294696.602000] Modules linked in: zd1211b usbhid rt73 ntfs bcm7401 bcm4506 alps_bsbe1_c01a cxd1981 tu1216 alps_bsbe1 stv0299 dvb_core alps_bsbe2 lnb_ctrl cu1216mk3 8712u dreambox_keyboard dreambox_rc2 lcd stb_core
    
    [4294696.602000] Process ldconfig (pid: 431, threadinfo=88272000, task=88fc80d8)
    
    [4294696.602000] Stack : 00000000 00000000 00000000 00000000 88273904 00002814 802ac12c 801be304
    
    [4294696.602000]         80370000 40000002 0000001a 10008401 8036dca8 8036dcb4 80370000 8920b000
    
    [4294696.602000]         80370000 00000000 802b0000 80370000 00000000 801bf898 013e5600 b04001b8
    
    [4294696.602000]         00000002 10008401 00000200 88fc80d8 80360000 80360000 802f3adc 80363908
    
    [4294696.602000]         803636d0 802f0000 0000000a 80360000 00000000 00000001 88273978 88273978
    
    [4294696.602000]         ...
    
    [4294696.602000] Call Trace:
    
    [4294696.602000] [<801b9e98>] brcmnand_ctrl_read+0x68/0x94
    
    [4294696.602000] [<801be304>] brcmnand_post_mortem_dump+0xa4/0x114
    
    [4294696.602000] [<801bf898>] brcmnand_ctrl_posted_read_cache+0x77c/0x1048
    
    [4294696.602000] [<801ba6f4>] brcmnand_read_page+0xf0/0x27c
    
    [4294696.602000] [<801bba00>] brcmnand_do_read_ops+0xd4/0x254
    
    [4294696.602000] [<801be670>] brcmnand_read+0x124/0x8a0
    
    [4294696.602000] [<801b5644>] part_read+0x90/0x174
    
    [4294696.602000] [<80114c3c>] jffs2_flash_read+0x74/0x2b4
    
    [4294696.602000] [<8010a064>] jffs2_do_read_inode_internal+0x398/0x16cc
    
    [4294696.602000] [<8010b520>] jffs2_do_read_inode+0x90/0x220
    
    [4294696.602000] [<80113548>] jffs2_read_inode+0x78/0x3f0
    
    [4294696.602000] [<80105a58>] jffs2_lookup+0x1f0/0x234
    
    [4294696.602000] [<800842a4>] do_lookup+0x184/0x1b8
    
    [4294696.602000] [<80085ee4>] __link_path_walk+0x6ec/0x1094
    
    [4294696.602000] [<80086940>] link_path_walk+0xb4/0x1c4
    
    [4294696.602000] [<80086ef4>] do_path_lookup+0xb8/0x2ac
    
    [4294696.602000] [<80087b74>] __user_walk_fd+0x44/0x78
    
    [4294696.602000] [<8007f880>] vfs_stat_fd+0x24/0x60
    
    [4294696.602000] [<8007f9c0>] sys_stat64+0x20/0x48
    
    [4294696.602000] [<8000d76c>] stack_done+0x20/0x3c
    
    [4294696.602000] 
    
    [4294696.602000] 
    
    [4294696.602000] Code: 0c0097e9  02203021  8fbf001c <8e020000> 8fb10018  8fb00014  03e00008  27bd0020  3c04802d 
    
    [4294696.884000] 2245 ms: 24
    
    udevd-event[348]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory
    
    
    modprobe: module cdc-acm not found in modules.dep
    modprobe: modul
     
    #12

Diese Seite empfehlen