joerg_999
Stamm User
- Registriert
- 11. Mai 2010
- Beiträge
- 1.040
- Reaktionspunkte
- 758
- Punkte
- 273
Install openwrt-18.06.2 on a Pogo E02:
Update 05/2019:
(Anleitungs update auf openwrt-18.06.2)
anbei die Links:
aktuelle oscam_svn_11518 im Anhang
Da für das alte OpenWRT (
derdigge inkl. rescuestick existiert, habe ich mich nun mal drüber gemacht und zusammengeschrieben wie man openwrt -18.06.2 auf einen POGO ins nand bekommt.
(NC oder serielle Konsole USB/serial adapter erforderlich!)
Ein Upgrade von OpenWRT (alte Versionen BB,CC,DD) auf Lede ist weder über LUCI noch über cli direkt möglich!
(Die Installation sollte sinngemäß für alle Kirkwoodplugs funktionieren)
1. Upgrade the Uboot + uboot-enviroment to most recent bodhi version
(you need uboot.2017.07-tld-1 + uboot.2016.05-tld-1.environment) --> see: update des uboots + enviroment
download and place the openwrt-18.06.2-kirkwood-cloudengines_pogoe02-initramfs-uImage on the root of a USB flash drive
formatted with FAT32 and insert it in the device
That file is a openwrt system image that runs from RAM, and you will only use that
to do a sysupgrade as normal with
It will reformat flash if needed, deal with any bad blocks and so on.
Put this stick into Pogo
then from uboot write set the new parameters
2. Set the additionally parameters for dual-boot: openwrt from nand / debian from USB-Stick
3. Run the following code for starting the process:
# wait about 45 sec then press <ENTER>
# now at command line in openwrt:
Here you have the choice how to upgrade:
4a over CLI (not working on old BB,CC or DD Images) or
4b over LEDE-WIF
4a. CLI upgrade: (funktioniert nur wenn schon mindestens LEDE oder openwrt 18.06.x drauf ist!)
or:
4b. LEDE/openwrt-WIF upgrade: (working always)
Pogo will reboot and start from nand with openwrt
5. change/create the /etc/fw_env.config in openwrt to:
(you need this to get access to your envs from openwrt)
Than you can install all the pakets you need... :smile:
enjoy joerg_999:smile:
Hier der
Nachtrag: Installation von Oscam auf eurem neuen openwrt-Pogo
(funktioniert auch mit dem neuen openwrt 18.06.x)
(nochmals Danke@derdigge für den feed)
Das WIF von OScam ist unter der <ip des Pogos>:8888 erreichbar.
Die USB Mäuse sind anhand der Seriennummern in der Datei /etc/config/oscam/oscam.watchdog zu konfigurieren. (Beispiele in der Datei)
Zum Austausch des oscam-bin auf eine aktuelle (svn_11518) einfach die im Anhang benutzen:
Update 05/2019:
(Anleitungs update auf openwrt-18.06.2)
anbei die Links:
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
aktuelle oscam_svn_11518 im Anhang
Da für das alte OpenWRT (
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
x)ja eine super Anleitung vonderdigge inkl. rescuestick existiert, habe ich mich nun mal drüber gemacht und zusammengeschrieben wie man openwrt -18.06.2 auf einen POGO ins nand bekommt.
(NC oder serielle Konsole USB/serial adapter erforderlich!)
Ein Upgrade von OpenWRT (alte Versionen BB,CC,DD) auf Lede ist weder über LUCI noch über cli direkt möglich!
(Die Installation sollte sinngemäß für alle Kirkwoodplugs funktionieren)
1. Upgrade the Uboot + uboot-enviroment to most recent bodhi version
(you need uboot.2017.07-tld-1 + uboot.2016.05-tld-1.environment) --> see: update des uboots + enviroment
download and place the openwrt-18.06.2-kirkwood-cloudengines_pogoe02-initramfs-uImage on the root of a USB flash drive
formatted with FAT32 and insert it in the device
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
to do a sysupgrade as normal with
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
.It will reformat flash if needed, deal with any bad blocks and so on.
Put this stick into Pogo
then from uboot write set the new parameters
2. Set the additionally parameters for dual-boot: openwrt from nand / debian from USB-Stick
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
3. Run the following code for starting the process:
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
# wait about 45 sec then press <ENTER>
# now at command line in openwrt:
Here you have the choice how to upgrade:
4a over CLI (not working on old BB,CC or DD Images) or
4b over LEDE-WIF
4a. CLI upgrade
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
4b. LEDE/openwrt-WIF upgrade: (working always)
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
Pogo will reboot and start from nand with openwrt
5. change/create the /etc/fw_env.config in openwrt to:
(you need this to get access to your envs from openwrt)
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
Than you can install all the pakets you need... :smile:
Code:
Du musst dich
Anmelden
oder
Registrieren um den Inhalt der Codes zu sehen!
enjoy joerg_999:smile:
Hier der
Du musst dich
Anmelden
oder
Registrieren
um diesen Inhalt sichtbar zu machen!
Nachtrag: Installation von Oscam auf eurem neuen openwrt-Pogo
(funktioniert auch mit dem neuen openwrt 18.06.x)
(nochmals Danke@derdigge für den feed)
Du musst dich
Anmelden
oder
Registrieren
um diesen Inhalt sichtbar zu machen!
Die USB Mäuse sind anhand der Seriennummern in der Datei /etc/config/oscam/oscam.watchdog zu konfigurieren. (Beispiele in der Datei)
Zum Austausch des oscam-bin auf eine aktuelle (svn_11518) einfach die im Anhang benutzen:
Anhänge
Zuletzt bearbeitet: