Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

[AlBundy]

Hallo zusammen,

hatte einen Futro als CS-Server mit OSCAM für eine V13 betrieben. Nun soll dieses Teil nur noch mit einer HD02-Karte betrieben werden. Aber es funktioniert einfach nicht.

Vielleicht hat einer von euch eine Ahnung woran es liegen könnte?

Die Karte ist heute erst aktiviert worden und läuft auch auf einer VU+ DUO.

Futro mit Debian
Smartreader (Smargo) - Config waren passend für eine V13

LOG-Datei

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Nov 21 16:09:14 2015
-------------------------------------------------------------------------------
2015/11/21 16:09:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8959 (i486-linux-gnu)
2015/11/21 16:09:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8349
2015/11/21 16:09:14 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/21 16:09:14 0 s userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2015/11/21 16:09:14 0 s signal handling initialized
2015/11/21 16:09:14 0 s 116 service-id's loaded in 0ms
2015/11/21 16:09:14 0 s newcamd: initialized (fd=5, port=50002)
2015/11/21 16:09:14 0 s -> CAID: 1843 PROVID: 000000
2015/11/21 16:09:14 0 s cccam: initialized (fd=6, port=40000)
2015/11/21 16:09:14 0 s hdplus [smartreader] creating thread for device Serial:Reader 36DXXXX
2015/11/21 16:09:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/21 16:09:14 0 s waiting for local card init
2015/11/21 16:09:14 8273428 r hdplus [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2015/11/21 16:09:14 8283F70 h webif: decompressed 54245 bytes back into 154648 bytes
2015/11/21 16:09:14 8283F70 h HTTP Server running. ip=0.0.0.0 port=83
2015/11/21 16:09:14 8273428 r Found reader with serial Reader 36DXXXX at 002:003
2015/11/21 16:09:14 8273428 r Found smartreader device Serial:Reader 36DXXXX
2015/11/21 16:09:14 8273428 r hdplus [smartreader] Reader initialized (device=Serial:Reader 36DXXXX, detect=cd, mhz=357, cardmhz=357)
2015/11/21 16:09:15 8273428 r hdplus [smartreader] card detected
2015/11/21 16:09:18 8273428 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 16:09:18 8273428 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 16:09:18 8273428 r hdplus [smartreader] Calculated work ETU is 8.96 us
2015/11/21 16:09:18 8273428 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2015/11/21 16:09:18 8273428 r hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 16:09:19 8273428 r hdplus [smartreader] detect native nagra card
2015/11/21 16:09:23 8273428 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/21 16:09:24 8273428 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2015/11/21 16:09:27 8273428 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 16:09:27 8273428 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 16:09:27 8273428 r hdplus [smartreader] Calculated work ETU is 9.33 us
2015/11/21 16:09:27 8273428 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2015/11/21 16:09:27 8273428 r hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 16:09:27 8273428 r hdplus [smartreader] card system not supported
2015/11/21 16:09:27 8273428 r hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2015/11/21 16:09:31 8273428 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 16:09:31 8273428 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 16:09:31 8273428 r hdplus [smartreader] Calculated work ETU is 108.45 us
2015/11/21 16:09:31 8273428 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2015/11/21 16:09:32 8273428 r hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2015/11/21 16:09:33 8273428 r hdplus [smartreader] detect native nagra card
2015/11/21 16:09:34 8273428 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/21 16:09:35 8273428 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2015/11/21 16:09:38 8273428 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 16:09:38 8273428 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 16:09:38 8273428 r hdplus [smartreader] Calculated work ETU is 9.33 us
2015/11/21 16:09:39 8273428 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2015/11/21 16:09:39 8273428 r hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 16:09:42 8273428 r hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/21 16:09:43 8273428 r hdplus [smartreader] T1 Resync command error, trying to reactivate!
2015/11/21 16:09:46 8273428 r hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 16:09:46 8273428 r hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 16:09:46 8273428 r hdplus [smartreader] Calculated work ETU is 9.33 us
2015/11/21 16:09:46 8273428 r hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.43 MHz (specified in reader->mhz)
2015/11/21 16:09:46 8273428 r hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 16:09:46 8273428 r hdplus [smartreader] card system not supported
2015/11/21 16:09:46 8273428 r hdplus [smartreader] card initializing error

oscam.server

Spoiler

[reader]
label = hdplus
protocol = smartreader
device = Serial:Reader 36DXXXX
Smargopatch = 1
services = hdplus
rsakey = F35XXXD5
boxkey = A76XXXXC
caid = 1843
ecmwhitelist = 1843:89
ident: = 1843:000000,003411,008011
detect = CD
autospeed = 1
#mhz = 368
#cardmhz = 368
group = 1
emmcache = 1,3,2

 

[dodo83]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

die Karte wird nicht eingelesen,
Configs?
welcher Reader? Smargo?
wie eingestellt?
die OScam würde ich auch mal updaten

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

Welche Oscam-Version empfiehlst du?

 

[dodo83]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

eine neuere, aktuell sind wir ca. 2000 Revisionen über deiner

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

So, Update fertig. Gleiches Problem.

Logfile

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sat Nov 21 17:05:22 2015
-------------------------------------------------------------------------------
2015/11/21 17:05:22 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11164 (i486-linux-gnu)
2015/11/21 17:05:22 00000000 s (main) System name = Linux
2015/11/21 17:05:22 00000000 s (main) Host name = OSCar
2015/11/21 17:05:22 00000000 s (main) Release = 2.6.32-5-686
2015/11/21 17:05:22 00000000 s (main) Version = #1 SMP Mon Sep 23 23:00:18 UTC 2013
2015/11/21 17:05:22 00000000 s (main) Machine = i686
2015/11/21 17:05:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1506
2015/11/21 17:05:22 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/21 17:05:22 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2015/11/21 17:05:22 00000000 s (main) signal handling initialized
2015/11/21 17:05:22 00000000 s (config) 116 service-id's loaded in 1 ms
2015/11/21 17:05:22 00000000 s (net) newcamd: initialized (fd=5, port=50002)
2015/11/21 17:05:22 00000000 s (net) -> CAID: 1843 PROVID: 000000
2015/11/21 17:05:22 00000000 s (net) cccam: initialized (fd=6, port=40000)
2015/11/21 17:05:22 00000000 s (reader) hdplus [smartreader] creating thread for device Serial:Reader 36DXXXX
2015/11/21 17:05:22 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/11/21 17:05:22 00000000 s (main) waiting for local card init
2015/11/21 17:05:22 40225B83 h (webif) webif: decompressed 166120 bytes back into 395660 bytes
2015/11/21 17:05:22 40225B83 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/11/21 17:05:22 1F575317 r (reader) hdplus [smartreader] Reader initialized (device=Serial:Reader 36DXXXX, detect=cd, mhz= AUTO, cardmhz=369)
2015/11/21 17:05:23 1F575317 r (reader) hdplus [smartreader] card detected
2015/11/21 17:05:27 1F575317 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 17:05:27 1F575317 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 17:05:27 1F575317 r (reader) hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2015/11/21 17:05:27 1F575317 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2015/11/21 17:05:27 1F575317 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/11/21 17:05:27 1F575317 r (reader) hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 17:05:28 1F575317 r (reader) hdplus [smartreader] detect native nagra card
2015/11/21 17:05:32 1F575317 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/21 17:05:33 1F575317 r (reader) hdplus [smartreader] T1 Resync command error, trying to reactivate!
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] card system not supported
2015/11/21 17:05:37 1F575317 r (reader) hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
2015/11/21 17:05:41 1F575317 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 17:05:41 1F575317 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 17:05:41 1F575317 r (reader) hdplus [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2015/11/21 17:05:41 1F575317 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=1 inv=1 parity=ODD
2015/11/21 17:05:42 1F575317 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/11/21 17:05:43 1F575317 r (reader) hdplus [smartreader] Warning: Card returned error on setting ifsd value to 28
2015/11/21 17:05:44 1F575317 r (reader) hdplus [smartreader] detect native nagra card
2015/11/21 17:05:45 1F575317 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/21 17:05:46 1F575317 r (reader) hdplus [smartreader] T1 Resync command error, trying to reactivate!
2015/11/21 17:05:50 1F575317 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 17:05:50 1F575317 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 17:05:50 1F575317 r (reader) hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2015/11/21 17:05:50 1F575317 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2015/11/21 17:05:50 1F575317 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/11/21 17:05:50 1F575317 r (reader) hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 17:05:54 1F575317 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/21 17:05:55 1F575317 r (reader) hdplus [smartreader] T1 Resync command error, trying to reactivate!
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] Card responded ok for ifsd request of 28
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] card system not supported
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/21 17:05:59 1F575317 r (reader) hdplus [smartreader] card initializing error

 

[dodo83]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

zum Smargo kann ich dir nichts sagen, eventuell macht der die Probleme, probier mal paar MHZ einstellungen aus oä
würde mal auf Easymouse wechseln

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

OK, habe mir mal eine Easymouse bestellt.
Leider finde ich keine Software mehr um den Smargo zu programmieren bzw. Firmware um diesen upzudaten.

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

Easymouse ist da. Problem bleibt.
Auf Phoenix gestellt.

Easymouse wird von Debian auch erkannt:
crw-rw---- 1 root dialout 188, 0 24. Nov 21:29 /dev/ttyUSB0

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Nov 24 21:16:04 2015
-------------------------------------------------------------------------------
2015/11/24 21:16:04 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11164 (i486-linux-gnu)
2015/11/24 21:16:04 00000000 s (main) System name = Linux
2015/11/24 21:16:04 00000000 s (main) Host name = OSCar
2015/11/24 21:16:04 00000000 s (main) Release = 2.6.32-5-686
2015/11/24 21:16:04 00000000 s (main) Version = #1 SMP Mon Sep 23 23:00:18 UTC 2013
2015/11/24 21:16:04 00000000 s (main) Machine = i686
2015/11/24 21:16:04 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 18306
2015/11/24 21:16:04 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/24 21:16:04 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2015/11/24 21:16:04 00000000 s (main) signal handling initialized
2015/11/24 21:16:04 00000000 s (config) 116 service-id's loaded in 0 ms
2015/11/24 21:16:04 00000000 s (net) newcamd: initialized (fd=5, port=50002)
2015/11/24 21:16:04 00000000 s (net) -> CAID: 1843 PROVID: 000000
2015/11/24 21:16:04 00000000 s (net) cccam: initialized (fd=6, port=40000)
2015/11/24 21:16:04 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0
2015/11/24 21:16:04 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/11/24 21:16:04 00000000 s (main) waiting for local card init
2015/11/24 21:16:04 40225B83 h (webif) webif: decompressed 166120 bytes back into 395660 bytes
2015/11/24 21:16:04 40225B83 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/11/24 21:16:05 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75108
2015/11/24 21:16:05 1F575317 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 03 time_us 7104
2015/11/24 21:16:05 1F575317 r (reader) hdplus [mouse] Buffers readed 1 bytes total time_us 82228
2015/11/24 21:16:05 1F575317 r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/11/24 21:16:05 1F575317 r (reader) hdplus [mouse] card detected
2015/11/24 21:16:06 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75102
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D xx xx xx xx
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] Setting baudrate to 111600 bps
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75099
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/11/24 21:16:07 1F575317 r (reader) hdplus [mouse] Card responded ok for ifsd request of 28
2015/11/24 21:16:08 1F575317 r (reader) hdplus [mouse] detect native nagra card
2015/11/24 21:16:11 1F575317 r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/24 21:16:12 1F575317 r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
2015/11/24 21:16:13 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75097
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D xx xx xx xx
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Setting baudrate to 111600 bps
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75099
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Card responded ok for ifsd request of 28
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] card system not supported
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2015/11/24 21:16:14 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75097
2015/11/24 21:16:15 1F575317 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D xx xx xx xx
2015/11/24 21:16:15 1F575317 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/24 21:16:15 1F575317 r (reader) hdplus [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/11/24 21:16:16 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75098
2015/11/24 21:16:16 1F575317 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/11/24 21:16:17 1F575317 r (reader) hdplus [mouse] Warning: Card returned error on setting ifsd value to 28
2015/11/24 21:16:18 1F575317 r (reader) hdplus [mouse] detect native nagra card
2015/11/24 21:16:20 1F575317 r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/24 21:16:22 1F575317 r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
2015/11/24 21:16:22 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75099
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D xx xx xx xx
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] Setting baudrate to 111600 bps
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75097
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/11/24 21:16:23 1F575317 r (reader) hdplus [mouse] Card responded ok for ifsd request of 28
2015/11/24 21:16:26 1F575317 r (reader) hdplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/11/24 21:16:28 1F575317 r (reader) hdplus [mouse] T1 Resync command error, trying to reactivate!
2015/11/24 21:16:28 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75100
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D xx xx xx xx
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] Setting baudrate to 111600 bps
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75099
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] Card responded ok for ifsd request of 28
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] card system not supported
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/24 21:16:29 1F575317 r (reader) hdplus [mouse] card initializing error

 

[4gx35]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

mouse auf 5v gestellt ? evtl. auch mhz 600 testen, also dip3+4 oben

bei beiden readern immer resync error - usb wechseln ?

etliche smartreader tools zum download in meiner anleitung easy config - siehe signatur unten
smartreader mhz 343 cardmhz 534 autospeed 1

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

Mouse auf 5V, Phoenix, 3,579MHz,

Bei 6MHz bekomme ich die Fehlermeldung:
"(reader) hdplus [mouse] ERROR: Opening device /dev/ttyUSB0 (errno=2 No such file or directory)"

USB-Port-Wechsel brachte auch keinen Erfolg.

Hier nochmal meine Configs:

oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 4069
preferlocalcards = 1

[newcamd]
port = 50002@1843:000000
key = 0102030405060708091011xxxxxx
keepalive = 1

[cccam]
port = 40000
nodeid = 0A0817861029xxxx
version = 2.3.0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.178.0-192.168.178.255

oscam.server

Spoiler

[reader]
label = hdplus
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
services = hdplus
rsakey = F35xxxxxD5
boxkey = A7xxxxx7C
caid = 1843
ecmwhitelist = 1843:89
ident: = 1843:000000,003411,008011
detect = CD
autospeed = 1
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

 

[4gx35]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

fehlt evtl. B bei rsakey oder copy fehler ?

boxkey  = A7642F57BC96D37C
rsakey  = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5

sonst vu zum server machen, solange cs noch geht oder hd+ per vu zum server einlesen, bis fehler gefunden ist

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

OK, es war der rsakey.
Da gab es wohl trotz Copy&Paste ein Problem mit einer Leerstelle.

Danke dir!

 

[AlBundy]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

Jetzt sieht die Log schon sehr viel besser aus.
Derzeit teste ich newcamd aber da wird es leider nicht hell!

Logfile:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Wed Nov 25 18:39:53 2015
-------------------------------------------------------------------------------
2015/11/25 18:39:53 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11164 (i486-linux-gnu)
2015/11/25 18:39:53 00000000 s (main) System name = Linux
2015/11/25 18:39:53 00000000 s (main) Host name = OSCar
2015/11/25 18:39:53 00000000 s (main) Release = 2.6.32-5-686
2015/11/25 18:39:53 00000000 s (main) Version = #1 SMP Mon Sep 23 23:00:18 UTC 2013
2015/11/25 18:39:53 00000000 s (main) Machine = i686
2015/11/25 18:39:53 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2772
2015/11/25 18:39:53 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/25 18:39:53 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2015/11/25 18:39:53 00000000 s (main) signal handling initialized
2015/11/25 18:39:53 00000000 s (config) 15 service-id's loaded in 1 ms
2015/11/25 18:39:53 00000000 s (config) 2 tier-id's loaded
2015/11/25 18:39:53 00000000 s (net) newcamd: initialized (fd=5, port=50002)
2015/11/25 18:39:53 00000000 s (net) -> CAID: 1843 PROVID: 000000
2015/11/25 18:39:53 00000000 s (net) cccam: initialized (fd=6, port=40000)
2015/11/25 18:39:53 00000000 s (reader) hdplus [mouse] creating thread for device /dev/ttyUSB0
2015/11/25 18:39:53 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/11/25 18:39:53 00000000 s (main) waiting for local card init
2015/11/25 18:39:53 483D637C h (webif) webif: decompressed 166120 bytes back into 395660 bytes
2015/11/25 18:39:53 483D637C h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/11/25 18:39:53 0EB453FB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75121
2015/11/25 18:39:53 0EB453FB r (reader) hdplus [mouse] Flush readed byte Nr 1 value 03 time_us 9572
2015/11/25 18:39:53 0EB453FB r (reader) hdplus [mouse] Buffers readed 1 bytes total time_us 84712
2015/11/25 18:39:53 0EB453FB r (reader) hdplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2015/11/25 18:39:54 0EB453FB r (reader) hdplus [mouse] card detected
2015/11/25 18:39:54 0EB453FB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 xx xx xx
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] Setting baudrate to 115200 bps
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] Calculated work ETU is 8.70 us reader mhz = 368
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75102
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2015/11/25 18:39:56 0EB453FB r (reader) hdplus [mouse] Card responded ok for ifsd request of 28
2015/11/25 18:39:57 0EB453FB r (reader) hdplus [mouse] detect native nagra card
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [mouse] ready for requests
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [mouse] found card system nagra
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] ROM: D N A S P 1 8 0
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] REV: M e r 0 0 0
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] SER: ############
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] CAID: 1843
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] Prv.ID: 00 00 00 00
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] IRD ID: ############
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] active to: 2016/01/12 11:59
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] -----------------------------------------
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] |id |tier |valid from |valid to |
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] +----+--------+------------+------------+
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] |8011|0066 |2014/03/12 |2015/03/13 |
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/11/25 18:39:58 0EB453FB r (reader) hdplus [nagra] |8011|0BEA |2015/11/20 |2016/12/04 |
2015/11/25 18:39:59 0EB453FB r (reader) hdplus [nagra] -----------------------------------------
2015/11/25 18:39:59 00000000 s (main) init for all local cards done
2015/11/25 18:39:59 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/11/25 18:39:59 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/11/25 18:39:59 00000000 s (anticasc) anti cascading disabled
2015/11/25 18:40:29 4B260E6B c (newcamd) client connected to 50002 port
2015/11/25 18:40:29 4B260E6B c (client) 192.168.178.21: resolved ip=192.168.178.21
2015/11/25 18:40:29 4B260E6B c (client) encrypted newcamd:50002-client 192.168.178.21 granted (buero, au=on (1 reader))
2015/11/25 18:40:29 4B260E6B c (newcamd) user buero authenticated successfully (eyetvCamd)
2015/11/25 18:40:29 4B260E6B c (newcamd) AU enabled for user buero on reader hdplus

oscam.user:

Spoiler

[account]
user = buero
pwd = buero
group = 1
hostname = 192.168.178.21
au = hdplus
key = 0102030405060708091011121314
port = 50002@1843:000000

- - - - - - - - - -

auch die Receiver mit camd werden nicht hell

 

[4gx35]

AW: Futro mit Debain - OSCAM 1.20 - HD02-Karte - Smartreader

was willst du denn mit newcamd, können die receiver kein cccam ?

hostname bei usern nicht verwenden !

 

[AlBundy]

newcamd brauche ich für EyeTV am Mac.

Die Receiver haben camd

Bei OSCAM habe ich unter SRVID:CAID@PROVID überall
0000:0000@000000
stehen.

Habe ich irgendeine Datei vergessen?

Sie müssen registriert sein, um Links zu sehen.