1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Infos DeltaCam description of hard- and software

Dieses Thema im Forum "DeltaCam" wurde erstellt von bevatron, 31. Dezember 2013.

Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. bevatron
    Offline

    bevatron Elite Lord

    Registriert:
    6. Dezember 2012
    Beiträge:
    4.211
    Zustimmungen:
    2.213
    Punkte für Erfolge:
    113
    Ort:
    Germany
    DeltaCam description of hard- and software

    Code:
    [B]Hardware[/B]:
    
    - ARM7TDMI Microprocessor, 8Kbytes Caches, 16Kbytes internal SRAM, 48MHz
    - 4Mbytes Flash
    - Encrypted SDRAM Interface, 8Mbytes SDRAM
    - 100Mbps MPEG-2 transport stream processing capability
    - support for HD channels (H.264/MPEG-4)
    - Secure Boot to prevent damages by wrong flashing of the cam
    - CAM Power Consumption: Max.1.5W
    - 1 smartcard slot
    - 1 simcard slot
    - Smartcard power supply: 3.3V and 5.0V per each smartcard/simcard slot (class A and class B smartcards)
    - Built-in Hardware Crypto engines/accelerators for RSA, AES, DES, SHA
    - support for hardware DVB Common Scrambling Algorithm, DVB-CSA
    
    [B]Firmware[/B]:
    
    - support for T0, T1 and T14 smartcards
    - support for 32 couples of control words with even/odd pair for descrambling
    - support for 32 PIDs for descrambling
    - support for 32 simultaneous PIDs for filtering
    - support for decrypting 4 simultaneous channels (also known as MTD or MTP, call it whatever you want)
    
    [B]Original smartcards CAS[/B]:
    
    - support for Mediaguard/Seca smartcards (Seca 1, Seca 2, Seca 3, Seca Aladin)
    - support for Viaccess smartcards (Viaccess 1, Viaccess 2/2.6, Viaccess 3, Viaccess 4, Viaccess 5)
    - support for Conax smartcards (some cards can require specific RSA and boxkey that the end user must insert with flashing tool)
    - support for Cryptoworks smartcards (some cards can require specific RSA and boxkey that the end user must insert with flashing tool)
    - support for Irdeto smarcards (some cards require specific camkey that the end user must insert with flashing tool)
    - support for Videoguard NDS smartcards (NDS 1, NDS 2, NDS 3: some cards can require specific boxid that the end user must insert with flashing tool)
    - support for Nagravision smartcards (Nagravision 1, Nagravision 2, Nagravision 3, Nagravision Tiger, Nagravision Aladin, Nagravision Berlin: some cards can require 
      specific RSA and boxkey that the end user must insert with flashing tool)
    - support for Nagravision tunneled smartcards
    - support for Betacrypt smartcards
    - support for Betacrypt tunneled smartcards
    - support for Dreamcrypt/Firecrypt smartcards
    - support for Dgcrypt smartcards
    - support for Bulcrypt smartcards
    - support for Drecrypt smartcards
    - support for Tongfang smartcards (some cards can require specific boxid that the end user must insert with flashing tool)
    - support for Griffin smartcards
    
    [B]Original software[/B] [B](factory firmware deltacrypt)[/B]:
    
    - support for Deltacrypt smartcards
    
    [B]Emulator CAS (emu firmware cobra only)[/B]:
    
    - support for Seca 1
    - support for Seca 2
    - support for Nagravision 1
    - support for Nagravision 2
    - support for Irdeto 1/Betacrypt 1
    - support for Irdeto 2
    - support for Viaccess 1
    - support for Viaccess 2/2.6/3.x
    - support for TPSCrypt 1
    - support for TPSCrypt 2
    - support for BISS
    - support for Constant DW (also known sometimes like Constant CW)
    
    [B]Software tools (Delta Flash Loader)[/B]:
    
    - possibility to flash/update CAM's firmware
    - possibility to add/change RSA and Box keys for each provider where it's needed (for example: Conax RSA providers, Nagravision Boxkey and RSA, NDS Boxkey, etc.)
    - possibility to add/edit emulator keys (flashing directly the softcam.key files or own binary format format in the emu firmware cobra) Attention: This function must not be used with python firmware! You must use it only with the emu firmware cobra!
    - possibility to add/edit CA IDs supported by the CAM (this is required for few old STBs that do not support more than 15 caids)
    - possibility to completly clear/erase the CAM
    
    [B]Exclusive stuff[/B]:
    
    - Csat Seca 3 pairing HD (nano 01)
    - UPC emulator (emu firmware cobra only)
    - Mediaset nagra tiger new smartcard reading support
     
    #1
Status des Themas:
Es sind keine weiteren Antworten möglich.

Diese Seite empfehlen