Daniel775
Ist gelegentlich hier
- Registriert
- 24. Januar 2010
- Beiträge
- 33
- Reaktionspunkte
- 4
- Punkte
- 8
Guten Morgen liebes Board,
da dies mein erstes Thema ist, möchte ich mich erstmal für diese zahlreichen Anleitungen und Tipps bedanken die man sich hier einverleiben kann.
Dennoch gibt es Probleme nach tests und fragen die offen bleiben. Ich fange mal mit den Fragen an.
1. Müssen beide Boxen die gleiche cccam Version haben?
2. Muss die Karte mit dem legalen Abo eine S02 sein?
3. Gibt es irgendwelche Consolenausgaben oder Tools die eine Überprüfung
der Verbindung zulassen?
4. Muss die zweite Box auch eine Karte im Slot haben?
5. Muss die cccam.cfg in /var/etc liegen?
6. Geht das Sharing nur mit den CI-Modul? Oder auch über Slot1?
Jetzt zu meinen Versuchen CS zu ermöglichen:
Also Box 1 läuft mit der Karte im Slot1 und kann die Känale mit der cccam Version 1.62A schauen.
Alle Dateien im Ordner /PLUGINS/OpenXCAS/MultiCAS die ein example- davor stehen hatten umbenannt ohne example.
Rechte auf 755 gesetzt bei den Dateien openxcas.conf und cccam.cfg.
F-Line eingefügt (F: Benuzter Passwort).
Box2 Application Area formatiert und mit V0.9.4348 geflasht. OpenXCAS über Plugins installiert. cccam Version 1.62A installiert.
Alle Dateien im Ordner /PLUGINS/OpenXCAS/MultiCAS die ein example- davor stehen hatten umbenannt ohne example.
Rechte auf 755 gesetzt bei den Dateien openxcas.conf und cccam.cfg.
C-Line eingefügt (C: 192.168.XXX.XXX 12000 Benutzer Passwort).
Beide Boxen Reboot. Mit telnet bei beiden Boxen und ps überprüft ob der Prozess /EMU/OpenXCAS/MultiCAS/emu_module läuft.
Jedoch bleibt bei Box2 sky technisch alles dunkel.
Ich bin auch mal nach dieser Anleitung vorgegangen:
https://www.digital-eliteboard.com/threads/61539
Wobei ich nicht verstehe wieso die Datei OpenXCAS.cfg und die modul_seq in den Ordner MultiCAS soll das ist doch eigentlich nur die OpenXCAS.cfg Datei die da rein gehört, oder? Die modul_seq hab ich jedenfalls im Ordner
/PLUGINS/OpenXCAS kopiert mit dem Eintrag MultiCAS.
Hier mal ein Netstat des Servers:
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 2 arbeitsplatz:telnet 192.168.XXX.XX:3273 ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ] DGRAM 1861 /tmp/.ir_control
unix 2 [ ] DGRAM 1863 /tmp/.CRTVSetup
unix 2 [ ] DGRAM 1870 /tmp/.file_control
unix 2 [ ] DGRAM 1876 /tmp/.CRTVCore
unix 2 [ ] DGRAM 1984 /tmp/ui_event
unix 2 [ ] DGRAM 1742 /tmp/.JIPC_Server
unix 2 [ ] DGRAM 1744 /tmp/.JIPC_Key_Server
unix 2 [ ] DGRAM 2007 /tmp/.DStar
unix 2 [ ] DGRAM 2009 /tmp/.DStar_Key
unix 2 [ ] DGRAM 1986
Kein offener Port zu sehen (12000)!
Achso und wer weiss welchen Befehl man in Telnet eingeben muss damit die Box ein Reboot macht? Ich habe es mit reboot versucht dann bleibt aber die Box mit alten Display stand einfach stehen und sagt kein mux mehr. Da hilft nurnoch der An/Aus schalter.
Mfg
da dies mein erstes Thema ist, möchte ich mich erstmal für diese zahlreichen Anleitungen und Tipps bedanken die man sich hier einverleiben kann.
Dennoch gibt es Probleme nach tests und fragen die offen bleiben. Ich fange mal mit den Fragen an.
1. Müssen beide Boxen die gleiche cccam Version haben?
2. Muss die Karte mit dem legalen Abo eine S02 sein?
3. Gibt es irgendwelche Consolenausgaben oder Tools die eine Überprüfung
der Verbindung zulassen?
4. Muss die zweite Box auch eine Karte im Slot haben?
5. Muss die cccam.cfg in /var/etc liegen?
6. Geht das Sharing nur mit den CI-Modul? Oder auch über Slot1?
Jetzt zu meinen Versuchen CS zu ermöglichen:
Also Box 1 läuft mit der Karte im Slot1 und kann die Känale mit der cccam Version 1.62A schauen.
Alle Dateien im Ordner /PLUGINS/OpenXCAS/MultiCAS die ein example- davor stehen hatten umbenannt ohne example.
Rechte auf 755 gesetzt bei den Dateien openxcas.conf und cccam.cfg.
F-Line eingefügt (F: Benuzter Passwort).
Box2 Application Area formatiert und mit V0.9.4348 geflasht. OpenXCAS über Plugins installiert. cccam Version 1.62A installiert.
Alle Dateien im Ordner /PLUGINS/OpenXCAS/MultiCAS die ein example- davor stehen hatten umbenannt ohne example.
Rechte auf 755 gesetzt bei den Dateien openxcas.conf und cccam.cfg.
C-Line eingefügt (C: 192.168.XXX.XXX 12000 Benutzer Passwort).
Beide Boxen Reboot. Mit telnet bei beiden Boxen und ps überprüft ob der Prozess /EMU/OpenXCAS/MultiCAS/emu_module läuft.
Jedoch bleibt bei Box2 sky technisch alles dunkel.
Ich bin auch mal nach dieser Anleitung vorgegangen:
https://www.digital-eliteboard.com/threads/61539
Wobei ich nicht verstehe wieso die Datei OpenXCAS.cfg und die modul_seq in den Ordner MultiCAS soll das ist doch eigentlich nur die OpenXCAS.cfg Datei die da rein gehört, oder? Die modul_seq hab ich jedenfalls im Ordner
/PLUGINS/OpenXCAS kopiert mit dem Eintrag MultiCAS.
Wer kann mir bei diesem Dschungel helfen? Wie ich weiter vorgehen sollte.Als nächstes macht man eine FTP Verbindung zur box und erstellt
im Ordner PLUGINS einen Ordner OpenXCAS.Darein kommt eine modul_seq
mit den Eintrag MultiCAS und eine OpenXCAS.cfg mit folgenden Eintrag
Hier mal ein Netstat des Servers:
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 2 arbeitsplatz:telnet 192.168.XXX.XX:3273 ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ] DGRAM 1861 /tmp/.ir_control
unix 2 [ ] DGRAM 1863 /tmp/.CRTVSetup
unix 2 [ ] DGRAM 1870 /tmp/.file_control
unix 2 [ ] DGRAM 1876 /tmp/.CRTVCore
unix 2 [ ] DGRAM 1984 /tmp/ui_event
unix 2 [ ] DGRAM 1742 /tmp/.JIPC_Server
unix 2 [ ] DGRAM 1744 /tmp/.JIPC_Key_Server
unix 2 [ ] DGRAM 2007 /tmp/.DStar
unix 2 [ ] DGRAM 2009 /tmp/.DStar_Key
unix 2 [ ] DGRAM 1986
Kein offener Port zu sehen (12000)!
Achso und wer weiss welchen Befehl man in Telnet eingeben muss damit die Box ein Reboot macht? Ich habe es mit reboot versucht dann bleibt aber die Box mit alten Display stand einfach stehen und sagt kein mux mehr. Da hilft nurnoch der An/Aus schalter.
Mfg
Zuletzt bearbeitet: