1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen

Problema aiuto per easymouse 2 con tvsat

Dieses Thema im Forum "OScam (Italiana)" wurde erstellt von mercurio07100, 21. Dezember 2012.

  1. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    ciao a tutti
    ho bisogno di una mano per configurare un easymouse2 per leggere la card tvsat

    conf.
    [global]
    logfile = /var/log/ipc/OScam.log
    fallbacktimeout = 2000
    cachedelay = 120
    nice = -1
    maxlogsize = 512
    preferlocalcards = 1
    dropdups = 1
    failbantime = 5

    [cccam]
    port = *****
    version = 2.3.0
    reshare = 1
    stealth = 1

    [webif]
    httpport = ******
    httpuser = *******
    httppwd = *******
    httptpl = /var/etc/picons
    httphelplang = it
    httphideidleclients = 1
    httpshowpicons = 1
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


    server
    [reader]
    label = media7
    protocol = smartreader
    device = 001:004
    caid = 1805
    rsakey = A92DA72F............164B5
    detect = cd
    nagra_read = 2
    mhz = 369
    cardmhz = 368
    ident = 1805:000000,008D11
    group = 1
    emmcache = 1,2,2
    blockemm-unknown = 1
    blockemm-g = 1


    [reader]
    label = tvsat
    protocol = mouse
    device = 003:002
    caid = 183D
    rsakey = A92.............8164B5
    detect = cd
    nagra_read = 2
    mhz = 357
    cardmhz = 357
    ident = 183D:000000,005411
    group = 3
    emmcache = 1,2,2
    blockemm-unknown = 1
    blockemm-g = 1

    user
    tutti i miei user sia in lan che in wan

    il tutto su un s400 con debian

    il problema e che con l'easymouse non riesco a leggere la card tvsat, e inoltre quando attivo il reder di tvsat(easymouse) tutti i miei user vanno offline, se lo disattivo immediatamente ritornano online


    questo e l'errore che mi da il log
    2012/12/21 00:25:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
    2012/12/21 00:25:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002
    2012/12/21 00:26:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
    2012/12/21 00:26:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002
    2012/12/21 00:27:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
    2012/12/21 00:27:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002
    2012/12/21 00:28:56 8E105A0 r tvsat [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
    2012/12/21 00:28:56 8E105A0 r tvsat [mouse] Cannot open device: 003:002

    Switch Debug from 0

    stato della card UNKNOWN


    settaggio easymouse2
    5v
    phoenix
    3,57 mhz

    carta inserita con chip verso il basso, giusto?

    il reder media7 (smargo) invece funziona perfettamente


    grazie
     
    Zuletzt bearbeitet: 25. Dezember 2012
    #1
  2. phantom

    Nervigen User Advertisement

  3. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.628
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: aiuto per easymouse 2 con tvsat

    ai inserito il device sbaglioto per easymouse dai il comando lsusb e vedi che device ti fa vedere
     
    #2
    meister85 gefällt das.
  4. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    lsusb
    root@S400 ~ > lsusb
    Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
    Bus 001 Device 002: ID 050d:0304 Belkin Components FSU304 USB 2.0 - 4 Ports Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    a me i device sembrano giusti
     
    #3
  5. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.628
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: aiuto per easymouse 2 con tvsat

    cosa stai usando dreambox ho qualche altro linux system?
     
    #4
  6. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    il tutto su un s400 con debian
     
    #5
  7. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.628
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: aiuto per easymouse 2 con tvsat

    ok allora fai cosi dai questo comando

    udevadm info -n /dev/ttyUSB0 -a



    ti risponde cosi

    Udevadm info starts with the device specified by the devpath and then
    walks up the chain of parent devices. It prints for every device
    found, all possible attributes in the udev rules key format.
    A rule to match, can be composed by the attributes of the device
    and the attributes from one single parent device.

    looking at device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

    looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

    looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0':
    KERNELS=="4-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="FT232R USB UART"

    looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4/4-1':
    KERNELS=="4-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}==" 90mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0600"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="4"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="FTDI"
    ATTRS{product}=="FT232R USB UART"
    ATTRS{serial}=="AH01B92A"

    looking at parent device '/devices/pci0000:00/0000:00:10.2/usb4':
    KERNELS=="usb4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}==" 0mA"
    ATTRS{urbnum}=="56"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0001"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="4"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="2"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 uhci_hcd"
    ATTRS{product}=="UHCI Host Controller"
    ATTRS{serial}=="0000:00:10.2"
    ATTRS{authorized_default}=="1"

    looking at parent device '/devices/pci0000:00/0000:00:10.2':
    KERNELS=="0000:00:10.2"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{vendor}=="0x1106"
    ATTRS{device}=="0x3038"
    ATTRS{subsystem_vendor}=="0x1106"
    ATTRS{subsystem_device}=="0x3038"
    ATTRS{class}=="0x0c0300"
    ATTRS{irq}=="10"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

    looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

    il mio easymouse serial e quello in rosso
     
    #6
    meister85 gefällt das.
  8. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    root@S400 ~ > udevadm info -n /dev/ttyUSB0 -a

    Udevadm info starts with the device specified by the devpath and then
    walks up the chain of parent devices. It prints for every device
    found, all possible attributes in the udev rules key format.
    A rule to match, can be composed by the attributes of the device
    and the attributes from one single parent device.

    looking at device '/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

    looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

    looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0':
    KERNELS=="3-2:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="FT232R USB UART"

    looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3/3-2':
    KERNELS=="3-2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}==" 90mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0600"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="3"
    ATTRS{devnum}=="2"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="FTDI"
    ATTRS{product}=="FT232R USB UART"
    ATTRS{serial}=="A901LODH"

    looking at parent device '/devices/pci0000:00/0000:00:03.1/usb3':
    KERNELS=="usb3"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}==" 0mA"
    ATTRS{urbnum}=="35"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0001"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="3"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="3"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ohci_hcd"
    ATTRS{product}=="OHCI Host Controller"
    ATTRS{serial}=="0000:00:03.1"
    ATTRS{authorized_default}=="1"

    looking at parent device '/devices/pci0000:00/0000:00:03.1':
    KERNELS=="0000:00:03.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ohci_hcd"
    ATTRS{vendor}=="0x1039"
    ATTRS{device}=="0x7001"
    ATTRS{subsystem_vendor}=="0x1039"
    ATTRS{subsystem_device}=="0x7001"
    ATTRS{class}=="0x0c0310"
    ATTRS{irq}=="3"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v00001039d00007001sv00001039sd00007001bc0Csc03i10"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

    looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

    quindi il mio sarà quello che ho segnato in rosso

    devo mettere il seriale come device così?

    device = A901LODH
     
    #7
  9. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.628
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: aiuto per easymouse 2 con tvsat

    device = Serial: XXXXXXXX

    ricordati che tivusat mhz vanno a 357 altrimenti nn ti legge la card
     
    #8
    mercurio07100 gefällt das.
  10. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    niente da fare

    2012/12/21 14:34:48 85B7760 r tvsat [mouse] ERROR: Opening device Serial: A901LODH (errno=2 No such file or directory)
    2012/12/21 14:34:48 85B7760 r tvsat [mouse] Cannot open device: Serial: A901LODH

    oltretutto mi manda offline tutti i miei user
    appena disattivo il reder di tvsat ritornano immediatamnete online
     
    #9
  11. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    potrebbe essere l'easymouse difettoso?


    con l'easymouse è meglio usare un hub alimentato oppure non è necessario?
     
    Zuletzt bearbeitet: 21. Dezember 2012
    #10
  12. seppel11
    Offline

    seppel11 Meister

    Registriert:
    15. Dezember 2007
    Beiträge:
    864
    Zustimmungen:
    93
    Punkte für Erfolge:
    0
    Ort:
    Daheim
    AW: aiuto per easymouse 2 con tvsat

    ai messo smartreader come lettore prova con phoenix
    quanto so io smartreader serve per smargo

    cosi va da me


    # TivuSat
    [reader]
    label = tivusat
    protocol = phoenix
    device = /dev/TIVUSAT # metti il tuo nome scelto in udev
    caid = 183D
    rsakey = A9......B5 # metti il rsakey
    detect = cd
    mhz = 368
    cardmhz = 368
    ident = 183D:000000,005411
    group = 1 #metti il tuo group
    emmcache = 1,3,2
    auprovid = 005411
    blockemm-g = 1
    blockemm-unknown = 1

    easymouse

    5V
    Phoenix
    Y1
     
    #11
    mercurio07100 gefällt das.
  13. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    OK,


    stasera provo e ti faccio sapere
     
    #12
  14. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    però leggendo il wiki di oscam non è indicato come protocollo il phoenix


    protocol
    = mouse (Lokaler Cardreader)
    = internal (Alle Cardreader mit einem "Device=/dev/sciX")
    = camd35|cs357x (Cascading - camd 3.5-kompatibler Remote-Server)
    = mp35
    = smartreader
    = serial
    = cs378x
    = gbox
    = newcamd|newcamd525
    = newcamd524
    = cccam
    = radegast
    = pcsc
    = constcw
     
    Zuletzt bearbeitet: 21. Dezember 2012
    #13
  15. seppel11
    Offline

    seppel11 Meister

    Registriert:
    15. Dezember 2007
    Beiträge:
    864
    Zustimmungen:
    93
    Punkte für Erfolge:
    0
    Ort:
    Daheim
    AW: aiuto per easymouse 2 con tvsat

    si mi sa che va ance con mouse ma smartreader e per il smargo

    io o tutti i easymouse su protocol phoenix
     
    #14
  16. mercurio07100
    Offline

    mercurio07100 Ist gelegentlich hier

    Registriert:
    27. Oktober 2012
    Beiträge:
    66
    Zustimmungen:
    0
    Punkte für Erfolge:
    0
    niente da fare con phoenix non viene neanche riconosciuto

    può essere un problema di versione di oscam ?

    quale usate voi?

    io ho messo l'ultima
     
    #15

Diese Seite empfehlen