007fastkill007
Newbie
- Registriert
- 19. März 2008
- Beiträge
- 19
- Reaktionspunkte
- 0
- Punkte
- 1
Hey Leute,
und zwar habe ich Probleme mit Hadu gehabt und wollte es mal mit Acamd testen... Nur habe ich kein Schimmer wie was eingestellt werden muss...
Ich kriege garnichts hell...
Kann mir da jemand helfen?
Meine cardclient.config sieht so aus:
#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'config' (optional) is number between 1-999 to combine with filtering
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is no filter 0000 & 0000. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#
# newcamd client
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# newcamd2 client whith Chameleon support
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# cccamn client
# 'softcam' (0=disabled 1=enabled) default 1=enabled
# 'maxhops' (0-999) default 5 hops
#
# radegast client
# No EMM support
#
# gbox client
# UDP localhost only, default ports, No EMM support
#
# gboxn client
# servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text
#
# camd35 client
# UDP protocol
#
#cccamn:dre#####rdb.no-ip.biz:12000:0/0000/0000:MeinUsername:Mein Passwort
Wäre für Hilfe wirklich sehr dankbar!
und zwar habe ich Probleme mit Hadu gehabt und wollte es mal mit Acamd testen... Nur habe ich kein Schimmer wie was eingestellt werden muss...
Ich kriege garnichts hell...
Kann mir da jemand helfen?
Meine cardclient.config sieht so aus:
#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'config' (optional) is number between 1-999 to combine with filtering
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is no filter 0000 & 0000. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#
# newcamd client
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# newcamd2 client whith Chameleon support
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# cccamn client
# 'softcam' (0=disabled 1=enabled) default 1=enabled
# 'maxhops' (0-999) default 5 hops
#
# radegast client
# No EMM support
#
# gbox client
# UDP localhost only, default ports, No EMM support
#
# gboxn client
# servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text
#
# camd35 client
# UDP protocol
#
#cccamn:dre#####rdb.no-ip.biz:12000:0/0000/0000:MeinUsername:Mein Passwort
Wäre für Hilfe wirklich sehr dankbar!