Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Zweite V14 in Oscam einbinden

    Nobody is reading this thread right now.

steyvo

Ist gelegentlich hier
Registriert
23. Oktober 2009
Beiträge
45
Reaktionspunkte
6
Punkte
28
Hallo zusammen,

dank dem Forum habe ich eine neue V14 Karte pairingssicher zum laufen bekommen, mit Top ECM Zeiten, vielen Dank dafür ! :emoticon-0150-hands

Jetzt habe ich eine ganze Weile versucht ein Thema zu finden, wo Einstellungen zur Verwendung von zwei V14 Karten gezeigt werden. Leider habe ich nichts gefunden.

Mit meinen Einstellungen sehe ich die erste Karte mit allen Infos wie payload, etc. aber nicht die zweite. Kann mir jemand sagen, was ich noch ändern muss???

User
[account]
user = cojo
au = skyv14,skyv14_2
group = 1



[account]
user = test
pwd = test
group = 1
hostname = 192.168.2.130
cccmaxhops = 2
cccreshare = 1


Server
[reader]
label = skyv14
protocol = internal
device = /dev/sci0
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 480
cardmhz = 343
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
#blockemm-bylen = 1-38,40,42-44,65-124,126-127,131,139-255
ndsversion = 2

[reader]
label = skyv14_2
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 480
cardmhz = 343
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
#blockemm-bylen = 1-38,40,42-44,65-124,126-127,131,139-255
ndsversion = 2

Config
[global]
logfile = /tmp/oscam.log
nice = -1
maxlogsize = 500
preferlocalcards = 1

[cache]

[cccam]
port = 12002
nodeid = 60B6CBB6101114EC
version = 2.3.0
reshare = 1
reshare_mode = 0

[dvbapi]
enabled = 1
au = 1
delayer = 60
user = cojo
boxtype = dreambox

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 30

[webif]
httpport = 16002
httpuser = user
httppwd = password
httphelplang = de
httprefresh = 30
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 30
 
AW: Zweite V14 in Oscam einbinden

Hi, um das zu trennen solltest du erst mal jedem Reader eine eigene Gruppe geben.
Damit kannst du dem User genau sagen, von welcher Karte er lesen soll.

Hatte ich dir das nicht schon an anderer Stelle geschrieben?


Grüße
Bombadil

Tapa-Talking by Eifön
 
AW: Zweite V14 in Oscam einbinden

hi
poste mal das log ab OScam start
mit der CARDMHZ läuft die erste?
 
AW: Zweite V14 in Oscam einbinden

Ne, mir noch nicht.... (hoffe ich)

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Feb 17 20:03:27 2015
-------------------------------------------------------------------------------
2015/02/17 20:03:27 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9963 (mipsel-unknown-linux-gnu-libusb)
2015/02/17 20:03:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 27183
2015/02/17 20:03:27 0 s [Emu] OSEmu (built-in) version 706
2015/02/17 20:03:27 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/02/17 20:03:27 0 s signal handling initialized
2015/02/17 20:03:27 0 s monitor: initialized (fd=5, port=988)
2015/02/17 20:03:27 0 s cccam: initialized (fd=6, port=12002)
2015/02/17 20:03:27 0 s skyv14 [internal] creating thread for device /dev/sci0
2015/02/17 20:03:27 0 s skyv14_2 [internal] creating thread for device /dev/sci1
2015/02/17 20:03:27 0 s emulator [emu] creating thread for device emulator
2015/02/17 20:03:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/17 20:03:27 0 s waiting for local card init
2015/02/17 20:03:27 555690 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/02/17 20:03:27 5503F8 r skyv14_2 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=480, cardmhz=343)
2015/02/17 20:03:27 77500468 h webif: decompressed 94244 bytes back into 248472 bytes
2015/02/17 20:03:27 77500468 h HTTP Server running. ip=0.0.0.0 port=16002
2015/02/17 20:03:27 54E718 r skyv14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=480, cardmhz=343)
2015/02/17 20:03:28 54E718 r skyv14 [internal] card detected
2015/02/17 20:03:28 555690 r emulator [emu] card detected
2015/02/17 20:03:28 54E718 r skyv14 [internal] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2015/02/17 20:03:28 54E718 r skyv14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/17 20:03:28 54E718 r skyv14 [internal] Calculated work ETU is 4.84 us reader mhz = 480
2015/02/17 20:03:29 555690 r emulator [emu] found card system emu
2015/02/17 20:03:29 555690 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/17 20:03:31 54E718 r skyv14 [internal] ATR Fsmax is 5 MHz, clocking card to 4.80 (specified in reader->mhz)
2015/02/17 20:03:32 54E718 r skyv14 [internal] Card type: P1TV
2015/02/17 20:03:32 54E718 r skyv14 [internal] Rom version: 20AA
2015/02/17 20:03:32 54E718 r skyv14 [internal] Credit available on card: 0 euro
2015/02/17 20:03:32 54E718 r skyv14 [internal] Extended 4C detected
2015/02/17 20:03:32 54E718 r skyv14 [internal] FuseByte: 05
2015/02/17 20:03:32 54E718 r skyv14 [internal] Region Code: 00BO0102
2015/02/17 20:03:32 54E718 r skyv14 [internal] Country Code: DEU
2015/02/17 20:03:33 54E718 r skyv14 [internal] PCB settings: FF FF FF FF
2015/02/17 20:03:33 54E718 r skyv14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/17 20:03:33 54E718 r skyv14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/02/17 20:03:33 54E718 r skyv14 [internal] ready for requests
2015/02/17 20:03:33 54E718 r skyv14 [internal] found card system videoguard2
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] card detected
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 0046, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 0056, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 0057, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 0058, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 005a, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 007b, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 007d, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 0081, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 008e, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00c0, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00c4, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00c7, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00c8, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00c9, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00ca, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00cb, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00f3, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00fa, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:33 54E718 r skyv14 [videoguard2] tier: 00ff, expiry date: 2015/04/16-01:00:00
2015/02/17 20:03:35 0 s init for all local cards done
2015/02/17 20:03:35 557370 c plain dvbapi-client granted (cojo, au=on (2 reader))
2015/02/17 20:03:35 557370 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/02/17 20:03:38 557370 c [ADD PID 0] CAID: 1833 ECM_PID: 1801 PROVID: 000000
2015/02/17 20:03:38 557370 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B01 PROVID: 000000
2015/02/17 20:03:38 557370 c [ADD PID 2] CAID: 09AF ECM_PID: 1F01 PROVID: 000000
2015/02/17 20:03:38 557370 c [ADD PID 3] CAID: 098C ECM_PID: 1A01 PROVID: 000000
2015/02/17 20:03:38 557370 c Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/17 20:03:38 557370 c [DVBAPI] Receiver wants to demux srvid 0072 on adapter 0000 camask 0001 index 0000 pmtpid 0063
2015/02/17 20:03:38 557370 c New program number: 0072 (1833:0072 unknown) [pmt_list_management 3]
2015/02/17 20:03:38 557370 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A01 ANY CHID PMTPID 0063 VPID 03FF
2015/02/17 20:03:38 557370 c cojo (098C&000000/0BB9/0072/98:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (87 ms) by skyv14
2015/02/17 20:03:43 557370 c cojo (098C&000000/0BB9/0072/98:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (82 ms) by skyv14
2015/02/17 20:03:50 557370 c cojo (098C&000000/0BB9/0072/98:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (83 ms) by skyv14

hoffe es ist jetzt alles privates unkenntlich und das was du benötigst....

Mit der MHZ gibts es keine Probleme bei der ersten
 
AW: Zweite V14 in Oscam einbinden

Steckt die 2. Karte richtig?


Grüße
Bombadil

Tapa-Talking by Eifön
 
AW: Zweite V14 in Oscam einbinden

es wird aber keine Zweite karte im Slot erkannt
tausche mal die Karten
und poste das log
 
AW: Zweite V14 in Oscam einbinden

Hab die Karte raus und wieder rein geschoben und schon taucht sie im System auf

--- Skipped 1 duplicated log lines ---
2015/02/17 20:31:08 567308 c cojo (098C&000000/0BB9/0072/98:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (90 ms) by skyv14 (L/2/2/2)
2015/02/17 20:31:08 567308 c cw:
2015/02/17 20:31:08 567308 19 34 12 5F AB BF E9 53 00 00 00 00 00 00 00 00
2015/02/17 20:31:08 5503F8 r skyv14_2 [videoguard2] classD3 ins54: no cw --> Card isn't active
2015/02/17 20:31:08 5503F8 r skyv14_2 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
2015/02/17 20:31:08 5503F8 r skyv14_2 [videoguard2] classD3 ins54: no cw --> No tier found
2015/02/17 20:31:08 5503F8 r skyv14_2 [videoguard2] classD3 ins54: no cw --> Tier expired
2015/02/17 20:31:09 77500468 h all debug_level=6
2015/02/17 20:31:09 54E718 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:09 555690 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:09 5503F8 r skyv14_2 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:10 555690 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:10 54E718 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:10 5503F8 r skyv14_2 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:11 0 --- Skipped 1 duplicated log lines ---
2015/02/17 20:31:11 54E718 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:11 555690 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:12 0 --- Skipped 1 duplicated log lines ---
2015/02/17 20:31:12 54E718 r skyv14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/02/17 20:31:12 5503F8 r skyv14_2 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

  • Angepinnt
gelöst Rootserver mit Debian Bookworm *FULL ENCRYPTED* inkl. Firewall/fail2ban und OSCam
2
Antworten
20
Aufrufe
1K
TDCroPower
Edision OS mini 4K im Test: Sat-Receiver mit Biss
2
Antworten
16
Aufrufe
1K
Narf
B
gelöst OSCAM icam unter Vti 15.0.2
2
Antworten
26
Aufrufe
17K
buzzard
B
gelöst Habe Probleme meine HD+ HD05 in OSCam zum Laufen zu bekommen.
2
Antworten
19
Aufrufe
1K
Alex
Bitte löschen. Ist für andere keine Hilfestellung.
2
Antworten
19
Aufrufe
3K
Leo888
L
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…