Hallo,
will meine neue V14 in der DM800se mit OScam zum laufen bringen und habe nach Doku von dodo83 die Konfigdateien erstellt. Freischaltsignal angefordert, Sky wird aber nicht hell. Kann mir jemand helfen?
Benutze Newnigma2 v4.0.9 mit OScam unstable #9787
oscam.conf
oscam.server
oscam.user
oscam.dvbapi
Livelog
will meine neue V14 in der DM800se mit OScam zum laufen bringen und habe nach Doku von dodo83 die Konfigdateien erstellt. Freischaltsignal angefordert, Sky wird aber nicht hell. Kann mir jemand helfen?
Benutze Newnigma2 v4.0.9 mit OScam unstable #9787
oscam.conf
[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox
[webif]
httpport = 8888
httpuser = gernot
httppwd = gernot
httphelplang = de
httprefresh = 10
httpallowed = 192.168.2.1-192.168.2.255
enabled = 1
au = 1
user = lokal
boxtype = dreambox
[webif]
httpport = 8888
httpuser = gernot
httppwd = gernot
httphelplang = de
httprefresh = 10
httpallowed = 192.168.2.1-192.168.2.255
oscam.server
[reader]
label = V14
protocol = internal
device = /dev/sci0
mhz = 1
autospeed = 0
cardmhz = 2700
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2
label = V14
protocol = internal
device = /dev/sci0
mhz = 1
autospeed = 0
cardmhz = 2700
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2
oscam.user
[account]
user = lokal
au = V14
group = 1
user = lokal
au = V14
group = 1
oscam.dvbapi
P:098C 1
I:0
I:0
Livelog
2014/11/06 21:45:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9787 (mipsel-oe-linux)
2014/11/06 21:45:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 639
2014/11/06 21:45:02 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/06 21:45:02 0 s signal handling initialized
2014/11/06 21:45:02 0 s cccam: initialized (fd=5, port=12000)
2014/11/06 21:45:02 0 s V14 [internal] creating thread for device /dev/sci0
2014/11/06 21:45:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/06 21:45:02 0 s waiting for local card init
2014/11/06 21:45:02 9C4D78 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/11/06 21:45:02 9CA570 h webif: decompressed 151082 bytes back into 360672 bytes
2014/11/06 21:45:02 9CA570 h HTTP Server running. ip=0.0.0.0 port=8888
2014/11/06 21:45:03 9C4D78 r V14 [internal] card detected
2014/11/06 21:45:04 9C4D78 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/11/06 21:45:04 9C4D78 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/06 21:45:04 9C4D78 r V14 [internal] TEST tempo mhz check = 1 mhz
2014/11/06 21:45:04 9C4D78 r V14 [internal] Calculated work ETU is 9300.00 us reader mhz = 1
2014/11/06 21:45:04 9C4D78 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)
2014/11/06 21:45:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 639
2014/11/06 21:45:02 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/11/06 21:45:02 0 s signal handling initialized
2014/11/06 21:45:02 0 s cccam: initialized (fd=5, port=12000)
2014/11/06 21:45:02 0 s V14 [internal] creating thread for device /dev/sci0
2014/11/06 21:45:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/06 21:45:02 0 s waiting for local card init
2014/11/06 21:45:02 9C4D78 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2014/11/06 21:45:02 9CA570 h webif: decompressed 151082 bytes back into 360672 bytes
2014/11/06 21:45:02 9CA570 h HTTP Server running. ip=0.0.0.0 port=8888
2014/11/06 21:45:03 9C4D78 r V14 [internal] card detected
2014/11/06 21:45:04 9C4D78 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/11/06 21:45:04 9C4D78 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/11/06 21:45:04 9C4D78 r V14 [internal] TEST tempo mhz check = 1 mhz
2014/11/06 21:45:04 9C4D78 r V14 [internal] Calculated work ETU is 9300.00 us reader mhz = 1
2014/11/06 21:45:04 9C4D78 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)