Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Support Tester für nächstes release gesucht!!!

Status
Für weitere Antworten geschlossen.
AW: Tester für nächstes release gesucht!!!

probiere mal...
WebIF erscheint kurz dann wird es gekillt..
hier der Log:
2014/09/19 02:06:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9851 (arm-openwrt-linux-uclibcgnueabi-ssl-libusb-pcsc)
2014/09/19 02:06:04 0 s creating pidfile /tmp/watchdog/oscam.pid with pid 4637
2014/09/19 02:06:04 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2014/09/19 02:06:04 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/09/19 02:06:04 0 s signal handling initialized
2014/09/19 02:06:04 0 s 253 service-id's loaded in 3 ms
2014/09/19 02:06:04 0 s monitor: initialized (fd=5, port=1000)
2014/09/19 02:06:04 0 s cccam: initialized (fd=6, port=12000)
2014/09/19 02:06:04 0 s OSEmu [cs357x] creating thread for device 127.0.0.1
2014/09/19 02:06:04 0 s sky1 [mouse] creating thread for device /dev/sky1
2014/09/19 02:06:04 0 s sky2 [mouse] creating thread for device /dev/sky2
2014/09/19 02:06:04 0 s orf [mouse] creating thread for device /dev/orf
2014/09/19 02:06:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/19 02:06:04 252DC0 p cs357x proxy 127.0.0.1:20000
2014/09/19 02:06:04 252DC0 p OSEmu [cs357x] proxy initialized, server 127.0.0.1:20000
2014/09/19 02:06:04 254AB8 r sky1 [mouse] ERROR: Opening device /dev/sky1 (errno=2 No such file or directory)
2014/09/19 02:06:04 254AB8 r sky1 [mouse] Cannot open device: /dev/sky1
2014/09/19 02:06:04 26E460 r sky2 [mouse] ERROR: Opening device /dev/sky2 (errno=2 No such file or directory)
2014/09/19 02:06:04 26E460 r sky2 [mouse] Cannot open device: /dev/sky2
2014/09/19 02:06:04 270158 r orf [mouse] ERROR: Opening device /dev/orf (errno=2 No such file or directory)
2014/09/19 02:06:04 270158 r orf [mouse] Cannot open device: /dev/orf
2014/09/19 02:06:04 279A50 h webif: decompressed 154897 bytes back into 366304 bytes
2014/09/19 02:06:04 279A50 h HTTP Server running. ip=0.0.0.0 port=8888
Meine oscam.watchdog
watchdog_enable = 1
watchdog_port = 1000
watchdog_user = watchdog
watchdog_pass = watchdog

# Aktiviert den "Panik Neustart" (panicreboot = 1)
#
# panic_reboot_count gibt an wie oft nach "Reader ready for requests" geschaut werden soll.
# Ein Versuch dauert 1 Minute und beim Fail wird geschaut ob ein Reader nicht geklappt hat oder einfach nur länger gewartet werden muss.
#
# Dann wird der Router neugestartet. Das ist hilfreich wenn man im Urlaub ist und
# die Gäste weiterhin das Bild "genießen" sollen.
# Ab 1.06 gibt es hier eine Verbesserung. Es wird nur 3x neugestartet danach aufgegeben um
# permanentes Rebooten zu verhindern. (Bootschleife)
panic_reboot = 0
panic_reboot_count = 3

# Aktiviert den pauschalen Montagsneustart um 04:30.
reboot = 0

# Ab Watchdog Version 1.02 verfügbar!
# udev_enable aktiviert den "udev". Dies ist kein richtiges udev, wird aber mit Easymouse 2 / phönix funzen!
# Es sind hier weitere Einstellungen nötig.
# SERIAL? = $deine Serial, siehe lsusb ( z.b. AH01343T )
# DEVICE? = $dein device = in oscam.server ( z.b. /dev/hdplus)
# udev_count = $Anzahl deiner Easymousen - Bis 256 Mäuse derzeit möglich, sollte reichen oder ?
# Hier aber kein /dev/ttyUSBx eingeben! Siehe "never do this" @ DOKUthread
# Bei easymose in Betrieb ist diese Funktion ein "must have"!
udev_enable = 1
udev_count = 3
SERIAL1 = A400fRtz
DEVICE1 = /dev/orf
SERIAL2 = A400fOjl
DEVICE2 = /dev/sky1
SERIAL3 = A400fFRg
DEVICE3 = /dev/sky2
Meine oscam.Server
[reader]
label = sky1
description = SKY1
protocol = mouse
device = /dev/sky1
autospeed = 0
caid = 1833
boxkey = A......C
rsakey = B.......9
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2


[reader]
label = sky2
description = SKY2
protocol = mouse
device = /dev/sky2
autospeed = 0
caid = 1833
boxkey = A......C
rsakey = B......9
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2

[reader]
label = orf
description = ORF
protocol = mouse
device = /dev/orf
autospeed = 0
caid = 0D05
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
PS: passiert auch mit nur einer Maus - der kann mit der udev nicht mehr richtig arbeiten und das ganze System pumpt
Er wirft sogar jedesmal die ssh Verbindung mit putty
 
Zuletzt bearbeitet:
AW: Tester für nächstes release gesucht!!!

System Log:
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 297.611406] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 297.633072] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.014469] usb 1-1.2: USB disconnect, device number 45
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.023244] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.043021] ftdi_sio 1-1.2:1.0: device disconnected
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.061220] usb 1-1.3: USB disconnect, device number 46
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.073121] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.093143] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.107560] usb 1-1.4: USB disconnect, device number 47
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.122083] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.147588] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 02:16:43 2014 kern.info kernel: [ 298.282973] usb 1-1: reset high-speed USB device number 2 using orion-ehci
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.733269] usb 1-1.2: new full-speed USB device number 48 using orion-ehci
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.862186] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.874460] usb 1-1.2: Detected FT232RL
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.878342] usb 1-1.2: Number of endpoints 2
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.882634] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.887476] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.892294] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 298.913093] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.003258] usb 1-1.3: new full-speed USB device number 49 using orion-ehci
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.132191] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.148019] usb 1-1.3: Detected FT232RL
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.151882] usb 1-1.3: Number of endpoints 2
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.156214] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.161029] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.165863] usb 1-1.3: Setting MaxPacketSize 64
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.183090] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
Fri Sep 19 02:16:44 2014 kern.info kernel: [ 299.273258] usb 1-1.4: new full-speed USB device number 50 using orion-ehci
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.402309] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.418147] usb 1-1.4: Detected FT232RL
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.422028] usb 1-1.4: Number of endpoints 2
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.426355] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.431166] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.435997] usb 1-1.4: Setting MaxPacketSize 64
Fri Sep 19 02:16:45 2014 kern.info kernel: [ 299.452069] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Fri Sep 19 02:16:48 2014 user.notice root: OScam wird gestartet.
Fri Sep 19 02:16:54 2014 user.notice root: Watchdog: OScam hat geantwortet, starte Reader Erkennung.
Fri Sep 19 02:16:55 2014 user.notice root: Watchdog: Es wurden 1 Hardware Reader erkannt:
Fri Sep 19 02:16:55 2014 user.notice root: Watchdog: Reader 'orf' mit PID '15E1AC0' ist bereit! (mouse)
Fri Sep 19 02:16:55 2014 user.notice root: Watchdog: Readererkennung erfolgreich abgeschlossen! Überwachung beginnt!
Fri Sep 19 02:16:57 2014 user.notice root: Watchdog: Soeben hat sich einer deiner Reader verabschiedet.
Fri Sep 19 02:16:57 2014 user.notice root: OScam wird beendet.
Fri Sep 19 02:16:58 2014 user.notice root: Watchdog: Es werden nun alle USB Geräte zurück gesezt.
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.432396] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.449648] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.533007] usb 1-1.4: reset full-speed USB device number 50 using orion-ehci
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.645485] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.653437] usb 1-1.4: Detected FT232RL
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.657298] usb 1-1.4: Number of endpoints 2
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.661603] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.666452] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.671265] usb 1-1.4: Setting MaxPacketSize 64
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 314.692893] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.082904] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.094499] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.183012] usb 1-1.3: reset full-speed USB device number 49 using orion-ehci
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.295363] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.303334] usb 1-1.3: Detected FT232RL
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.307190] usb 1-1.3: Number of endpoints 2
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.311506] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.316344] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:00 2014 kern.info kernel: [ 315.321159] usb 1-1.3: Setting MaxPacketSize 64
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.342873] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.752891] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.782787] ftdi_sio 1-1.2:1.0: device disconnected
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.863153] usb 1-1.2: reset full-speed USB device number 48 using orion-ehci
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.975369] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.983374] usb 1-1.2: Detected FT232RL
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.987228] usb 1-1.2: Number of endpoints 2
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.991543] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 315.996381] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 316.001197] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 02:17:01 2014 kern.info kernel: [ 316.022863] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.405016] usb 1-1.2: USB disconnect, device number 48
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.413023] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.432775] ftdi_sio 1-1.2:1.0: device disconnected
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.451988] usb 1-1.3: USB disconnect, device number 49
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.462872] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.482777] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.492965] usb 1-1.4: USB disconnect, device number 50
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.502965] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.522263] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 316.652715] usb 1-1: reset high-speed USB device number 2 using orion-ehci
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.103014] usb 1-1.2: new full-speed USB device number 51 using orion-ehci
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.231933] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.251110] usb 1-1.2: Detected FT232RL
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.255010] usb 1-1.2: Number of endpoints 2
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.259311] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.264140] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.268953] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 02:17:02 2014 kern.info kernel: [ 317.290627] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.373012] usb 1-1.3: new full-speed USB device number 52 using orion-ehci
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.501945] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.517896] usb 1-1.3: Detected FT232RL
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.521758] usb 1-1.3: Number of endpoints 2
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.526089] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.530903] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.535740] usb 1-1.3: Setting MaxPacketSize 64
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.552835] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.643020] usb 1-1.4: new full-speed USB device number 53 using orion-ehci
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.771940] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.787928] usb 1-1.4: Detected FT232RL
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.791789] usb 1-1.4: Number of endpoints 2
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.796121] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.800936] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.805765] usb 1-1.4: Setting MaxPacketSize 64
Fri Sep 19 02:17:03 2014 kern.info kernel: [ 317.822829] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Fri Sep 19 02:17:06 2014 user.notice root: OScam wird gestartet.
Fri Sep 19 02:17:11 2014 user.notice root: Watchdog: OScam hat geantwortet, starte Reader Erkennung.
Fri Sep 19 02:17:12 2014 user.notice root: Watchdog: Es wurden 1 Hardware Reader erkannt:
Fri Sep 19 02:17:12 2014 user.notice root: Watchdog: Reader 'orf' mit PID '166EAB8' ist bereit! (mouse)
Fri Sep 19 02:17:12 2014 user.notice root: Watchdog: Readererkennung erfolgreich abgeschlossen! Überwachung beginnt!
Fri Sep 19 02:17:15 2014 user.notice root: Watchdog: Soeben hat sich einer deiner Reader verabschiedet.
Fri Sep 19 02:17:15 2014 user.notice root: OScam wird beendet.
Fri Sep 19 02:17:15 2014 user.notice root: Watchdog: Es werden nun alle USB Geräte zurück gesezt.
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.001699] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.019069] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.102881] usb 1-1.4: reset full-speed USB device number 53 using orion-ehci
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.215361] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.231121] usb 1-1.4: Detected FT232RL
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.235026] usb 1-1.4: Number of endpoints 2
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.239320] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.244150] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.248971] usb 1-1.4: Setting MaxPacketSize 64
Fri Sep 19 02:17:17 2014 kern.info kernel: [ 332.262663] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.652681] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.664716] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.752886] usb 1-1.3: reset full-speed USB device number 52 using orion-ehci
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.865238] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.873199] usb 1-1.3: Detected FT232RL
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.877058] usb 1-1.3: Number of endpoints 2
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.881373] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.886219] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.891034] usb 1-1.3: Setting MaxPacketSize 64
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 332.912646] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 333.302667] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Fri Sep 19 02:17:18 2014 kern.info kernel: [ 333.314366] ftdi_sio 1-1.2:1.0: device disconnected
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.402887] usb 1-1.2: reset full-speed USB device number 51 using orion-ehci
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.525364] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.541179] usb 1-1.2: Detected FT232RL
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.545086] usb 1-1.2: Number of endpoints 2
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.549378] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.554207] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.559028] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.572641] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.955300] usb 1-1.2: USB disconnect, device number 51
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.962763] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 333.987380] ftdi_sio 1-1.2:1.0: device disconnected
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.002325] usb 1-1.3: USB disconnect, device number 52
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.012662] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.032553] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.042740] usb 1-1.4: USB disconnect, device number 53
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.052754] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.072840] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 02:17:19 2014 kern.info kernel: [ 334.202491] usb 1-1: reset high-speed USB device number 2 using orion-ehci
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.652760] usb 1-1.2: new full-speed USB device number 54 using orion-ehci
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.781815] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.797832] usb 1-1.2: Detected FT232RL
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.801693] usb 1-1.2: Number of endpoints 2
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.806024] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.810840] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.815666] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.837601] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 334.922756] usb 1-1.3: new full-speed USB device number 55 using orion-ehci
Fri Sep 19 02:17:20 2014 kern.info kernel: [ 335.052186] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 02:17:20 2014 kern.info kernel
2.Systemlog:
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.808025] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.824451] ftdi_sio 1-1.2:1.0: device disconnected
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.838511] usb 1-1.3: USB disconnect, device number 7
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.848340] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.868663] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.882295] usb 1-1.4: USB disconnect, device number 8
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.895987] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 59.918140] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 03:05:44 2014 kern.info kernel: [ 60.048091] usb 1-1: reset high-speed USB device number 2 using orion-ehci
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.498462] usb 1-1.2: new full-speed USB device number 9 using orion-ehci
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.626629] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.638280] usb 1-1.2: Detected FT232RL
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.642363] usb 1-1.2: Number of endpoints 2
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.646660] usb 1-1.2: Endpoint 1 MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.651507] usb 1-1.2: Endpoint 2 MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.656329] usb 1-1.2: Setting MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.678375] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.768466] usb 1-1.3: new full-speed USB device number 10 using orion-ehci
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.896514] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.908294] usb 1-1.3: Detected FT232RL
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.912179] usb 1-1.3: Number of endpoints 2
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.916479] usb 1-1.3: Endpoint 1 MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.921323] usb 1-1.3: Endpoint 2 MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.926141] usb 1-1.3: Setting MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 60.948290] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.028464] usb 1-1.4: new full-speed USB device number 11 using orion-ehci
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.156505] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.168309] usb 1-1.4: Detected FT232RL
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.172187] usb 1-1.4: Number of endpoints 2
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.176488] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.181328] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Fri Sep 19 03:05:45 2014 kern.info kernel: [ 61.186138] usb 1-1.4: Setting MaxPacketSize 64
Fri Sep 19 03:05:46 2014 kern.info kernel: [ 61.208306] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Fri Sep 19 03:05:49 2014 user.notice root: OScam wird gestartet.
Fri Sep 19 03:05:55 2014 user.notice root: Watchdog: OScam hat geantwortet, starte Reader Erkennung.
Fri Sep 19 03:05:55 2014 user.notice root: Watchdog: Es wurden 3 Hardware Reader erkannt:
Fri Sep 19 03:05:55 2014 user.notice root: Watchdog: Reader 'sky1' mit PID '174AA8' ist bereit! (mouse)
Fri Sep 19 03:05:55 2014 user.notice root: Watchdog: Reader 'sky2' mit PID '18E448' ist bereit! (mouse)
Fri Sep 19 03:05:55 2014 user.notice root: Watchdog: Reader 'orf' mit PID '190140' ist bereit! (mouse)
Fri Sep 19 03:05:55 2014 user.notice root: Watchdog: Readererkennung erfolgreich abgeschlossen! Überwachung beginnt!
Fri Sep 19 03:05:58 2014 user.notice root: Watchdog: Soeben hat sich einer deiner Reader verabschiedet.
Fri Sep 19 03:05:58 2014 user.notice root: OScam wird beendet.
Fri Sep 19 03:05:58 2014 user.notice root: Watchdog: Es werden nun alle USB Geräte zurück gesezt.
Fri Sep 19 03:06:00 2014 kern.info kernel: [ 76.069074] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
Fri Sep 19 03:06:00 2014 kern.info kernel: [ 76.080337] ftdi_sio 1-1.4:1.0: device disconnected
Fri Sep 19 03:06:00 2014 kern.info kernel: [ 76.169221] usb 1-1.4: reset full-speed USB device number 11 using orion-ehci
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.281698] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.296636] usb 1-1.4: Detected FT232RL
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.300539] usb 1-1.4: Number of endpoints 2
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.304831] usb 1-1.4: Endpoint 1 MaxPacketSize 64
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.309661] usb 1-1.4: Endpoint 2 MaxPacketSize 64
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.314481] usb 1-1.4: Setting MaxPacketSize 64
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.327770] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.715357] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.729089] ftdi_sio 1-1.3:1.0: device disconnected
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.809348] usb 1-1.3: reset full-speed USB device number 10 using orion-ehci
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.921696] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
Fri Sep 19 03:06:01 2014 kern.info kernel: [ 76.929656] usb 1-1.3: Detected FT232RL
Kernel Log:
[ 98.107866] usb 1-1.3: Detected FT232RL
[ 98.111752] usb 1-1.3: Number of endpoints 2
[ 98.116040] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 98.120876] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 98.125700] usb 1-1.3: Setting MaxPacketSize 64
[ 98.147853] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 98.238007] usb 1-1.4: new full-speed USB device number 17 using orion-ehci
[ 98.366183] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 98.377849] usb 1-1.4: Detected FT232RL
[ 98.381729] usb 1-1.4: Number of endpoints 2
[ 98.386030] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 98.390866] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 98.395681] usb 1-1.4: Setting MaxPacketSize 64
[ 98.417831] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 113.245111] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 113.261749] ftdi_sio 1-1.4:1.0: device disconnected
[ 113.346884] usb 1-1.4: reset full-speed USB device number 17 using orion-ehci
[ 113.459361] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 113.474403] usb 1-1.4: Detected FT232RL
[ 113.478305] usb 1-1.4: Number of endpoints 2
[ 113.482598] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 113.487429] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 113.492249] usb 1-1.4: Setting MaxPacketSize 64
[ 113.505827] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 113.893591] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 113.906616] ftdi_sio 1-1.3:1.0: device disconnected
[ 113.986760] usb 1-1.3: reset full-speed USB device number 16 using orion-ehci
[ 114.099113] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 114.107077] usb 1-1.3: Detected FT232RL
[ 114.110936] usb 1-1.3: Number of endpoints 2
[ 114.115248] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 114.120087] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 114.124903] usb 1-1.3: Setting MaxPacketSize 64
[ 114.145316] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 114.532773] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 114.546585] ftdi_sio 1-1.2:1.0: device disconnected
[ 114.626759] usb 1-1.2: reset full-speed USB device number 15 using orion-ehci
[ 114.739239] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 114.754353] usb 1-1.2: Detected FT232RL
[ 114.758253] usb 1-1.2: Number of endpoints 2
[ 114.762546] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 114.767377] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 114.772196] usb 1-1.2: Setting MaxPacketSize 64
[ 114.785541] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 115.164162] usb 1-1.2: USB disconnect, device number 15
[ 115.176581] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 115.187779] ftdi_sio 1-1.2:1.0: device disconnected
[ 115.206569] usb 1-1.3: USB disconnect, device number 16
[ 115.215481] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 115.236477] ftdi_sio 1-1.3:1.0: device disconnected
[ 115.253789] usb 1-1.4: USB disconnect, device number 17
[ 115.266586] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 115.284427] ftdi_sio 1-1.4:1.0: device disconnected
[ 115.416413] usb 1-1: reset high-speed USB device number 2 using orion-ehci
[ 115.866759] usb 1-1.2: new full-speed USB device number 18 using orion-ehci
[ 115.995173] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 116.010439] usb 1-1.2: Detected FT232RL
[ 116.014303] usb 1-1.2: Number of endpoints 2
[ 116.018626] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 116.023502] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 116.028335] usb 1-1.2: Setting MaxPacketSize 64
[ 116.046547] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 116.136756] usb 1-1.3: new full-speed USB device number 19 using orion-ehci
[ 116.264933] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 116.276561] usb 1-1.3: Detected FT232RL
[ 116.280443] usb 1-1.3: Number of endpoints 2
[ 116.284735] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 116.289573] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 116.294395] usb 1-1.3: Setting MaxPacketSize 64
[ 116.316543] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 116.406757] usb 1-1.4: new full-speed USB device number 20 using orion-ehci
[ 116.534927] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 116.546550] usb 1-1.4: Detected FT232RL
[ 116.550434] usb 1-1.4: Number of endpoints 2
[ 116.554724] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 116.559561] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 116.564384] usb 1-1.4: Setting MaxPacketSize 64
[ 116.586539] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 131.416251] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 131.427349] ftdi_sio 1-1.4:1.0: device disconnected
[ 131.516386] usb 1-1.4: reset full-speed USB device number 20 using orion-ehci
[ 131.628738] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 131.636698] usb 1-1.4: Detected FT232RL
[ 131.640559] usb 1-1.4: Number of endpoints 2
[ 131.644873] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 131.649712] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 131.654529] usb 1-1.4: Setting MaxPacketSize 64
[ 131.675121] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 132.063355] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 132.076216] ftdi_sio 1-1.3:1.0: device disconnected
[ 132.156384] usb 1-1.3: reset full-speed USB device number 19 using orion-ehci
[ 132.268737] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 132.276694] usb 1-1.3: Detected FT232RL
[ 132.280555] usb 1-1.3: Number of endpoints 2
[ 132.284868] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 132.289708] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 132.294524] usb 1-1.3: Setting MaxPacketSize 64
[ 132.314983] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 132.702755] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 132.716207] ftdi_sio 1-1.2:1.0: device disconnected
[ 132.796385] usb 1-1.2: reset full-speed USB device number 18 using orion-ehci
[ 132.908735] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 132.916696] usb 1-1.2: Detected FT232RL
[ 132.920551] usb 1-1.2: Number of endpoints 2
[ 132.924867] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 132.929704] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 132.934519] usb 1-1.2: Setting MaxPacketSize 64
[ 132.955151] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 133.334085] usb 1-1.2: USB disconnect, device number 18
[ 133.346210] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 133.357761] ftdi_sio 1-1.2:1.0: device disconnected
[ 133.376186] usb 1-1.3: USB disconnect, device number 19
[ 133.385588] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 133.406103] ftdi_sio 1-1.3:1.0: device disconnected
[ 133.423973] usb 1-1.4: USB disconnect, device number 20
[ 133.436218] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 133.454775] ftdi_sio 1-1.4:1.0: device disconnected
[ 133.586038] usb 1-1: reset high-speed USB device number 2 using orion-ehci
[ 134.036386] usb 1-1.2: new full-speed USB device number 21 using orion-ehci
[ 134.164801] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 134.180104] usb 1-1.2: Detected FT232RL
[ 134.183967] usb 1-1.2: Number of endpoints 2
[ 134.188291] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 134.193113] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 134.197941] usb 1-1.2: Setting MaxPacketSize 64
[ 134.216171] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 134.306383] usb 1-1.3: new full-speed USB device number 22 using orion-ehci
[ 134.434800] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 134.450116] usb 1-1.3: Detected FT232RL
[ 134.453982] usb 1-1.3: Number of endpoints 2
[ 134.458306] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 134.463128] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 134.467960] usb 1-1.3: Setting MaxPacketSize 64
[ 134.486159] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 134.576380] usb 1-1.4: new full-speed USB device number 23 using orion-ehci
[ 134.704798] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 134.720102] usb 1-1.4: Detected FT232RL
[ 134.723961] usb 1-1.4: Number of endpoints 2
[ 134.728287] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 134.733111] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 134.737940] usb 1-1.4: Setting MaxPacketSize 64
[ 134.765410] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 149.612463] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 149.625891] ftdi_sio 1-1.4:1.0: device disconnected
[ 149.706009] usb 1-1.4: reset full-speed USB device number 23 using orion-ehci
[ 149.818488] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 149.826466] usb 1-1.4: Detected FT232RL
[ 149.830323] usb 1-1.4: Number of endpoints 2
[ 149.834637] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 149.839525] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 149.844335] usb 1-1.4: Setting MaxPacketSize 64
[ 149.865086] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 150.253462] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 150.270163] ftdi_sio 1-1.3:1.0: device disconnected
[ 150.366007] usb 1-1.3: reset full-speed USB device number 22 using orion-ehci
[ 150.478360] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 150.486314] usb 1-1.3: Detected FT232RL
[ 150.490175] usb 1-1.3: Number of endpoints 2
[ 150.494480] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 150.499328] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 150.504143] usb 1-1.3: Setting MaxPacketSize 64
[ 150.524799] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 150.912969] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 150.925867] ftdi_sio 1-1.2:1.0: device disconnected
[ 151.006013] usb 1-1.2: reset full-speed USB device number 21 using orion-ehci
[ 151.118362] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 151.126324] usb 1-1.2: Detected FT232RL
[ 151.130178] usb 1-1.2: Number of endpoints 2
[ 151.134494] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 151.139334] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 151.144147] usb 1-1.2: Setting MaxPacketSize 64
[ 151.164850] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 151.544052] usb 1-1.2: USB disconnect, device number 21
[ 151.555869] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 151.567808] ftdi_sio 1-1.2:1.0: device disconnected
[ 151.585858] usb 1-1.3: USB disconnect, device number 22
[ 151.595858] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 151.620455] ftdi_sio 1-1.3:1.0: device disconnected
[ 151.642055] usb 1-1.4: USB disconnect, device number 23
[ 151.663252] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 151.675867] ftdi_sio 1-1.4:1.0: device disconnected
[ 151.815728] usb 1-1: reset high-speed USB device number 2 using orion-ehci
[ 152.266007] usb 1-1.2: new full-speed USB device number 24 using orion-ehci
[ 152.394424] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 152.409796] usb 1-1.2: Detected FT232RL
[ 152.413659] usb 1-1.2: Number of endpoints 2
[ 152.417985] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 152.422805] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 152.427633] usb 1-1.2: Setting MaxPacketSize 64
[ 152.445826] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 152.536007] usb 1-1.3: new full-speed USB device number 25 using orion-ehci
[ 152.664430] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 152.679788] usb 1-1.3: Detected FT232RL
[ 152.683647] usb 1-1.3: Number of endpoints 2
[ 152.687975] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 152.692793] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 152.697627] usb 1-1.3: Setting MaxPacketSize 64
[ 152.715830] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 152.806007] usb 1-1.4: new full-speed USB device number 26 using orion-ehci
[ 152.944297] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 152.958283] usb 1-1.4: Detected FT232RL
[ 152.962146] usb 1-1.4: Number of endpoints 2
[ 152.966467] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 152.971291] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 152.976121] usb 1-1.4: Setting MaxPacketSize 64
[ 152.995817] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 167.855585] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 167.871352] ftdi_sio 1-1.4:1.0: device disconnected
[ 167.955762] usb 1-1.4: reset full-speed USB device number 26 using orion-ehci
[ 168.068238] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 168.083568] usb 1-1.4: Detected FT232RL
[ 168.087471] usb 1-1.4: Number of endpoints 2
[ 168.091765] usb 1-1.4: Endpoint 1 MaxPacketSize 64
[ 168.096596] usb 1-1.4: Endpoint 2 MaxPacketSize 64
[ 168.101415] usb 1-1.4: Setting MaxPacketSize 64
[ 168.114984] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB2
[ 168.503744] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 168.520558] ftdi_sio 1-1.3:1.0: device disconnected
[ 168.605757] usb 1-1.3: reset full-speed USB device number 25 using orion-ehci
[ 168.718110] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 168.726073] usb 1-1.3: Detected FT232RL
[ 168.729929] usb 1-1.3: Number of endpoints 2
[ 168.734244] usb 1-1.3: Endpoint 1 MaxPacketSize 64
[ 168.739091] usb 1-1.3: Endpoint 2 MaxPacketSize 64
[ 168.743906] usb 1-1.3: Setting MaxPacketSize 64
[ 168.764734] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 169.153273] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 169.170024] ftdi_sio 1-1.2:1.0: device disconnected
[ 169.265757] usb 1-1.2: reset full-speed USB device number 24 using orion-ehci
[ 169.378109] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 169.386057] usb 1-1.2: Detected FT232RL
[ 169.389911] usb 1-1.2: Number of endpoints 2
[ 169.394223] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 169.399069] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 169.403879] usb 1-1.2: Setting MaxPacketSize 64
[ 169.424607] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 169.803997] usb 1-1.2: USB disconnect, device number 24
[ 169.815552] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 169.827779] ftdi_sio 1-1.2:1.0: device disconnected
[ 169.845546] usb 1-1.3: USB disconnect, device number 25
[ 169.855959] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 169.875760] ftdi_sio 1-1.3:1.0: device disconnected
[ 169.889815] usb 1-1.4: USB disconnect, device number 26
[ 169.903895] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[ 169.928664] ftdi_sio 1-1.4:1.0: device disconnected
[ 170.065383] usb 1-1: reset high-speed USB device number 2 using orion-ehci
[ 170.515755] usb 1-1.2: new full-speed USB device number 27 using orion-ehci
[ 170.642063] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 170.655535] usb 1-1.2: Detected FT232RL
[ 170.659395] usb 1-1.2: Number of endpoints 2
[ 170.663697] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 170.668535] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 170.673346] usb 1-1.2: Setting MaxPacketSize 64
[ 170.695500] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 170.775759] usb 1-1.3: new full-speed USB device number 28 using orion-ehci
[ 170.904173] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 170.919626] usb 1-1.3: Detected FT232RL
Ausgabe von lsusb:
Bus 001 Device 034: ID 0403:6001 Reader gefunden == A400fOjl
Bus 001 Device 035: ID 0403:6001 Reader gefunden == A400fRtz
Bus 001 Device 036: ID 0403:6001 Reader gefunden == A400fFRg
Bus 001 Device 002: ID 05e3:0608 Reader gefunden == USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux 3.10.49 ehci_hcd EHCI Host Controller
Ausgabe mit einem Reader on gebootet die anderen 2 per WIF dazugeschaltet
2014/09/19 02:33:16 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9851 (arm-openwrt-linux-uclibcgnueabi-ssl-libusb-pcsc)
2014/09/19 02:33:16 0 s services reloaded: 0 services freed, 22 services loaded, rejected 0
2014/09/19 02:33:16 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/09/19 02:33:16 0 s signal handling initialized
2014/09/19 02:33:16 0 s 253 service-id's loaded in 5 ms
2014/09/19 02:33:16 0 s monitor: initialized (fd=5, port=1000)
2014/09/19 02:33:16 0 s cccam: initialized (fd=6, port=12000)
2014/09/19 02:33:16 0 s OSEmu [cs357x] creating thread for device 127.0.0.1
2014/09/19 02:33:16 0 s orf [mouse] creating thread for device /dev/orf
2014/09/19 02:33:16 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/09/19 02:33:16 21FF00 r orf [mouse] ERROR: Opening device /dev/orf (errno=2 No such file or directory)
2014/09/19 02:33:16 21FF00 r orf [mouse] Cannot open device: /dev/orf
2014/09/19 02:33:16 202DC0 p cs357x proxy 127.0.0.1:20000
2014/09/19 02:33:16 202DC0 p OSEmu [cs357x] proxy initialized, server 127.0.0.1:20000
2014/09/19 02:33:16 204AB8 h webif: decompressed 154897 bytes back into 366304 bytes
2014/09/19 02:33:16 204AB8 h HTTP Server running. ip=0.0.0.0 port=8888
2014/09/19 02:33:17 22C1F0 c encrypted cccam-client 192.168.100.100 granted (test, au=off)
2014/09/19 02:34:46 204AB8 h sky1 [mouse] Restarting reader
2014/09/19 02:34:46 204AB8 h sky1 [mouse] creating thread for device /dev/sky1
2014/09/19 02:34:46 2387B8 r sky1 [mouse] ERROR: Opening device /dev/sky1 (errno=2 No such file or directory)
2014/09/19 02:34:46 2387B8 r sky1 [mouse] Cannot open device: /dev/sky1
2014/09/19 02:34:47 204AB8 h sky2 [mouse] Restarting reader
2014/09/19 02:34:47 204AB8 h sky2 [mouse] creating thread for device /dev/sky2
2014/09/19 02:34:47 232348 r sky2 [mouse] ERROR: Opening device /dev/sky2 (errno=2 No such file or directory)
2014/09/19 02:34:47 232348 r sky2 [mouse] Cannot open device: /dev/sky2
2014/09/19 02:34:51 204AB8 h sky2 [mouse] Restarting reader
2014/09/19 02:34:51 204AB8 h sky2 [mouse] creating thread for device /dev/sky2
2014/09/19 02:34:51 2361F8 r sky2 [mouse] ERROR: Opening device /dev/sky2 (errno=2 No such file or directory)
2014/09/19 02:34:51 2361F8 r sky2 [mouse] Cannot open device: /dev/sky2
2014/09/19 02:35:26 21FF00 r orf [mouse] ERROR: Opening device /dev/orf (errno=2 No such file or directory)
2014/09/19 02:35:26 21FF00 r orf [mouse] Cannot open device: /dev/orf
 
Zuletzt bearbeitet:
AW: Tester für nächstes release gesucht!!!

jibs nicht....

mache mal ein leerzeichen zwischen die einzelnen mäuse ein leezeichen.

SERIAL1 = A400fRtz
DEVICE1 = /dev/orf

SERIAL2 = A400fOjl
DEVICE2 = /dev/sky1

SERIAL3 = A400fFRg
DEVICE3 = /dev/sky2

und setze mal:
Wait for cards in config global.

Dann versuche mal eine Datei /root/test.sh zu machen mit folgendem Inhalt:
Code: 
#!/bin/sh

source /lib/oscamfunctions.sh

watchdog_udev
stelle oscam auf disable und boote neu.
Wenn du diese Datei nun ausführst, sollten links in /dev auftauchen.
ls -la /dev | grep ttyUSB
 
Zuletzt bearbeitet:
AW: Tester für nächstes release gesucht!!!

mit nur einer mouse erhält man eher keine reproduzierbaren testerkenntnisse,
ich warte mal ab, bis eine neue version da ist
 
AW: Tester für nächstes release gesucht!!!

Zeige mir am Pogo mal
ls /sys/devices
 
AW: Tester für nächstes release gesucht!!!

mache mal ein leerzeichen zwischen die einzelnen mäuse ein leezeichen
Zum Vergrößern anklicken....
Da waren welche drinnen, die hatte der "Spoiler" eliminiert,
und
Wait for cards in config global
Zum Vergrößern anklicken....
habe ich absichtlich mal rausgenommen da ich sonst nicht mehr ins oscam WIF gekommen bin weil die OSCam so kurz da war und dauernd neu gestartet wurde somit der Pogo unbedienbar da er jedesmal auch die ssh Verbindung geschmissen hat.

Keine WIF, kein OScamWIF, kein putty, kein scp
 
Zuletzt bearbeitet:
AW: Tester für nächstes release gesucht!!!

Ok,
Ich baue morgen/Sonntag hier mein versuchsparkur auf.
Dann beackere ich das mal.
Andern werde ich auch, das er erst anfangt nach erfrorst zu lauschen nach "init for all Local cards done" dann kann man auch in ruhe Reader einrichten, configs testen ohne das der dazwischen rumbaldovert un in einer Tür den restart Button druckt.
Das erschein mir sinnvoll.
 
AW: Tester für nächstes release gesucht!!!

Die gewünschte Ausgabe nach Aufruf von test.sh:
root@OpenWrt:~# /root/test.sh

Alle Variablen konnten gefunden werden
root@OpenWrt:~# ls -la /dev | grep ttyUSB
crw-r--r-- 1 root root 188, 0 Sep 19 03:02 ttyUSB0
crw-r--r-- 1 root root 188, 1 Sep 19 03:02 ttyUSB1
crw-r--r-- 1 root root 188, 2 Sep 19 03:02 ttyUSB2
root@OpenWrt:~#
 
AW: Tester für nächstes release gesucht!!!

Ok, wie gesagt da muss ich aufbauen hier...
 
AW: Tester für nächstes release gesucht!!!

So bitte einmal Watchdog / Udev testen.
Der Upload läuft noch......
 
AW: Tester für nächstes release gesucht!!!

Upload ist fertig, sollte alles funzen, bitte um Feedback!
 
AW: Tester für nächstes release gesucht!!!

Danke fürs Update !

Welche Version muss ich für einen WR 842nd v2 nehmen finde den nicht explizit in der Liste.
 
AW: Tester für nächstes release gesucht!!!

WR 842n-v2 das ist der Richtige

Grüße joerg_999
 
AW: Tester für nächstes release gesucht!!!

Danke werde ich dann mal versuchen wie es läuft.
 
AW: Tester für nächstes release gesucht!!!

tplink mit einer easymouse:
wd deaktivieren mit enable=0 funktioniert jetzt;

wd aktiv und mouse per udev: oscam startet und funktioniert, aber wd_user watchmon wird laufend connected und sofort wieder disconnected
2014/09/22 09:39:30 plain monitor-client 127.0.0.1 granted (watchmon, lvl=4)
2014/09/22 09:39:30 watchmon disconnected from 127.0.0.1
keine meldung dazu im systemprotokoll;
 
Zuletzt bearbeitet:
Status
Für weitere Antworten geschlossen.
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…