Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

sky v13 verlängerung klappt nicht

AW: sky v13 verlängerung klappt nicht

Was steht beim Reader unter written?
 
AW: sky v13 verlängerung klappt nicht

Sie müssen registriert sein, um Links zu sehen.
 
Zuletzt bearbeitet von einem Moderator:
AW: sky v13 verlängerung klappt nicht

Da is noch nix geschrieben worden. Evtl. Ist dein Reader defekt. Schreib nochmal den 34 und schau nochmal was bei written steht.
 
AW: sky v13 verlängerung klappt nicht

Du musst angemeldet sein, um Bilder zu sehen.


Du musst angemeldet sein, um Bilder zu sehen.

written bleibt immer 0, dann werd ich mal den internen reader versuchen also ohne smargo
muss ich auf etwas achten?
 
Zuletzt bearbeitet von einem Moderator:
AW: sky v13 verlängerung klappt nicht

Musst evtl. mit den Einstellungen rumspielen bis die Karte erkannt wird.
 
AW: sky v13 verlängerung klappt nicht

so karte wurde erkannt, hier die config:

oscam.conf
[global]disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0


[newcamd]
port = 61479@09C4:000000
key = 12345678901234567890


[webif]
httpport = 8083
httpuser = user
httppwd = pw
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254,192.168.2.1-192.168.2.254
httphideidleclients = 1
httpreadonly = 0


[dvbapi]
enabled = 1
user = toni1
au = 1
boxtype = dreambox

oscam.user
[account]
user = toni1
pwd = pw1
group = 1
au = internal

oscam.server
[reader]
label = internal
description = sky v13
protocol = internal
device = /dev/sci0
caid = 09C4
ident = 09C4:000000
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.dvbapi
P: 09c4 1

log
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] Unable to get smartcard credit
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] FuseByte: 25
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] Region Code: 00BO0101
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] Country Code: DEU
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] Pincode read: 4702
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] PCB settings: FF FF FF FF
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] Parental control disabled
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] serial: ########, BoxID: ########, baseyear: 2004
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] ready for requests
2016/02/02 20:49:42 59DF7743 r (reader) internal [internal] found card system videoguard2
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] card detected
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] ------------------------------------------------------------------
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] +---------+----------+---------------------+---------------------+
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] |-- 00 ---|-- 00fa --| 2016/04/01-01:00:00 |
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] |-- 00 ---|-- 00f3 --| 2016/04/01-01:00:00 |
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] |-- 00 ---|-- 00ff --| 2016/04/01-01:00:00 |
2016/02/02 20:49:42 7E413CD9 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 20:49:42 7E413CD9 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B98 PMTPID 0061 (NO MATCHING READER)
2016/02/02 20:49:42 59DF7743 r (reader) internal [videoguard2] ------------------------------------------------------from-ins70--
2016/02/02 20:49:43 7E413CD9 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 20:49:43 7E413CD9 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B98 ANY CHID PMTPID 0061 VPID 01FF
2016/02/02 20:49:43 59DF7743 r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 20:49:43 7E413CD9 c (ecm) toni1 (09C4@000000/025F/0076/B3:09D312C9D82AF0A181DC639CF4B481CE:0F06000020): not found (151 ms) by internal
2016/02/02 20:49:44 7E413CD9 c (ecm) toni1 (09C4@000000/025F/0076/B3:09D312C9D82AF0A181DC639CF4B481CE:0F06000020): not found (1 ms) by internal
2016/02/02 20:49:45 59DF7743 r (-) -- Skipped 3 duplicated log lines --
2016/02/02 20:49:45 59DF7743 r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 20:49:45 7E413CD9 c (ecm) toni1 (09C4@000000/025F/0076/B3:421AF2DB66C4041EA57A19E002753E48:0F06000020): not found (139 ms) by internal
2016/02/02 20:49:45 7E413CD9 c (ecm) toni1 (09C4@000000/025F/0076/B3:421AF2DB66C4041EA57A19E002753E48:0F06000020): not found (2 ms) by internal
2016/02/02 20:49:45 7E413CD9 c (ecm) toni1 (09C4@000000/025F/0076/B3:421AF2DB66C4041EA57A19E002753E48:0F06000020): not found (1 ms) by internal
2016/02/02 20:49:47 7E413CD9 c (-) -- Skipped 6 duplicated log lines --

mal warten auf die emms
 
Zuletzt bearbeitet von einem Moderator:
AW: sky v13 verlängerung klappt nicht

ja hab ich, ich dachte ich muss warten bis er wieder unter unique emm aufgelistet wird.
aber es ist alles gleich wie beim smargo reader

written UQ ist jetzt auf 1

fuse ist 25

payload ist 00 00 20 00 00 00

keine neuen entitlements, muss ich warten? oder was sollte jetzt geschehen?
 
AW: sky v13 verlängerung klappt nicht

Starte jetzt mal den Receiver neu.
 
AW: sky v13 verlängerung klappt nicht

neues log

1970/01/01 01:00:11 00000000 s (main) Host name = vusolose
1970/01/01 01:00:11 00000000 s (main) Release = 3.13.5
1970/01/01 01:00:11 00000000 s (main) Version = #1 SMP Wed Oct 21 21:12:30 CEST 2015
1970/01/01 01:00:11 00000000 s (main) Machine = mips
1970/01/01 01:00:11 00000000 s (main) Stb model = dm8000
1970/01/01 01:00:11 00000000 s (main) Stb vumodel = vusolose
1970/01/01 01:00:11 00000000 s (main) Stb boxtype = vusolose
1970/01/01 01:00:11 00000000 s (main) The current system time is smaller than the build date (Dec 26 2015). Waiting up to 60 seconds for time to correct
2016/02/02 21:21:53 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 331
2016/02/02 21:21:53 00000000 s [Emu] oscam-emu version 728
2016/02/02 21:21:53 00000000 s (config) userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2016/02/02 21:21:53 00000000 s (main) signal handling initialized
2016/02/02 21:21:53 00000000 s (config) 252 service-id's loaded in 3 ms
2016/02/02 21:21:53 00000000 s (net) newcamd: initialized (fd=4, port=61479)
2016/02/02 21:21:53 00000000 s (net) -> CAID: 09C4 PROVID: 000000
2016/02/02 21:21:53 00000000 s (reader) internal [internal] creating thread for device /dev/sci0
2016/02/02 21:21:53 00000000 s (reader) emulator [emu] creating thread for device emulator
2016/02/02 21:21:53 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/02/02 21:21:53 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam.emmcache in 1 ms
2016/02/02 21:21:53 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 2 ms
2016/02/02 21:21:53 00000000 s (anticasc) anti cascading disabled
2016/02/02 21:21:53 2F61665D r (reader) internal [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2016/02/02 21:21:53 2F61665D r (reader) internal [internal] Reader sci internal, detected box type: vusolose
2016/02/02 21:21:53 00000000 [Emu] info: FFDecsa parallel mode = 64
2016/02/02 21:21:53 5A626A4B r key file not found in: /etc/tuxbox/config
2016/02/02 21:21:53 5A626A4B r key file not found in: /var/keys
2016/02/02 21:21:53 459E6DA5 h (webif) webif: decompressed 166637 bytes back into 399160 bytes
2016/02/02 21:21:53 459E6DA5 h (webif) HTTP Server running. ip=0.0.0.0 port=8083
2016/02/02 21:21:53 5A626A4B r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2016/02/02 21:21:53 08D0EBE2 c (client) plain dvbapi-client granted (toni1, au=on (1 reader))
2016/02/02 21:21:53 08D0EBE2 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2016/02/02 21:21:53 08D0EBE2 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2016/02/02 21:21:54 5A626A4B r (reader) emulator [emu] card detected
2016/02/02 21:21:54 2F61665D r (reader) internal [internal] card detected
2016/02/02 21:21:55 2F61665D r (reader) internal [internal] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2016/02/02 21:21:55 2F61665D r (reader) internal [internal] Init card protocol T0, FI=1, F=372, D=16, N=3
2016/02/02 21:21:55 2F61665D r (reader) internal [internal] Calculated work ETU is 5.17 us reader mhz = 450
2016/02/02 21:21:55 5A626A4B r (reader) emulator [emu] found card system emu
2016/02/02 21:21:55 5A626A4B r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/02/02 21:21:55 5A626A4B r key file not found in: /etc/tuxbox/config
2016/02/02 21:21:55 5A626A4B r key file not found in: /var/keys
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 098C ECM_PID: 1A0F PROVID: 000000
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 0)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0030 length: 0)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 03ff length: 0)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0403 length: 0)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in caPMT
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 serving srvid 006C (09C4@000000:006C unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0063
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 10)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0030 length: 5)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 03ff length: 3)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0403 length: 16)
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 found 3 ECMpids and 4 STREAMpids in PMT
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 serving srvid 006C (09C4@000000:006C unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0063
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:21:58 2F61665D r (reader) internal [internal] Buffers readed 0 bytes total time_us 3100044
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:21:58 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:21:59 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:21:59 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:21:59 2F61665D r (reader) internal [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2016/02/02 21:21:59 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:21:59 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:22:00 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:22:00 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Card type: P1TV
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Rom version: 10A7
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Unable to get smartcard credit
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] FuseByte: 25
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Region Code: 00BO0101
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Country Code: DEU
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Pincode read: 4702
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] PCB settings: FF FF FF FF
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] Parental control disabled
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] serial: ########, BoxID: ########, baseyear: 2004
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] ready for requests
2016/02/02 21:22:00 2F61665D r (reader) internal [internal] found card system videoguard2
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] card detected
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] ------------------------------------------------------------------
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] +---------+----------+---------------------+---------------------+
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] |-- 00 ---|-- 00fa --| 2016/04/01-01:00:00 |
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] |-- 00 ---|-- 00f3 --| 2016/04/01-01:00:00 |
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] |-- 00 ---|-- 00ff --| 2016/04/01-01:00:00 |
2016/02/02 21:22:00 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:22:00 08D0EBE2 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2016/02/02 21:22:00 2F61665D r (reader) internal [videoguard2] ------------------------------------------------------from-ins70--
2016/02/02 21:22:01 08D0EBE2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2016/02/02 21:22:01 08D0EBE2 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 09C4 PROVID 000000 ECMPID 1B0F ANY CHID PMTPID 0063 VPID 03FF
2016/02/02 21:22:01 2F61665D r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 21:22:01 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:BB408C992F48FC19F59D637050B7F629:0F06000020): not found (166 ms) by internal
2016/02/02 21:22:01 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:BB408C992F48FC19F59D637050B7F629:0F06000020): not found (1 ms) by internal
2016/02/02 21:22:03 2F61665D r (-) -- Skipped 6 duplicated log lines --
2016/02/02 21:22:03 2F61665D r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 21:22:03 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:BA62F392A13A0AC0DB45CBFC1D172DD5:0F06000020): not found (138 ms) by internal
2016/02/02 21:22:03 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:BA62F392A13A0AC0DB45CBFC1D172DD5:0F06000020): not found (1 ms) by internal
2016/02/02 21:22:09 2F61665D r (-) -- Skipped 20 duplicated log lines --
2016/02/02 21:22:09 2F61665D r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 21:22:09 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:BA62F392A13A0AC0DB45CBFC1D172DD5:0F06000020): not found (137 ms) by internal
2016/02/02 21:22:09 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:BA62F392A13A0AC0DB45CBFC1D172DD5:0F06000020): not found (1 ms) by internal
2016/02/02 21:22:10 2F61665D r (-) -- Skipped 4 duplicated log lines --
2016/02/02 21:22:10 2F61665D r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 21:22:10 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:0E62F3FAC9BA68B0C37E2A6BA8302563:0F06000020): not found (138 ms) by internal
2016/02/02 21:22:10 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:0E62F3FAC9BA68B0C37E2A6BA8302563:0F06000020): not found (1 ms) by internal
2016/02/02 21:22:12 08D0EBE2 c (-) -- Skipped 6 duplicated log lines --
2016/02/02 21:22:12 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:0E62F3FAC9BA68B0C37E2A6BA8302563:0F06000020): not found (2 ms) by internal
2016/02/02 21:22:12 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:0E62F3FAC9BA68B0C37E2A6BA8302563:0F06000020): not found (1 ms) by internal
2016/02/02 21:22:16 2F61665D r (-) -- Skipped 12 duplicated log lines --
2016/02/02 21:22:16 2F61665D r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
2016/02/02 21:22:16 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:0E62F3FAC9BA68B0C37E2A6BA8302563:0F06000020): not found (137 ms) by internal
2016/02/02 21:22:16 08D0EBE2 c (ecm) toni1 (09C4@000000/0C20/006C/B3:0E62F3FAC9BA68B0C37E2A6BA8302563:0F06000020): not found (1 ms) by internal
2016/02/02 21:22:17 2F61665D r (-) -- Skipped 4 duplicated log lines --
2016/02/02 21:22:17 2F61665D r (reader) internal [videoguard2] classD3 ins54: no cw --> Tier expired
 
AW: sky v13 verlängerung klappt nicht

Sky hat mit 827026 deine Entitlements gelöscht. Gestern morgen hattest du noch 827024, wieso war die Karte denn nicht geblockt? Mann mann...

-supraracer
 
AW: sky v13 verlängerung klappt nicht

was heißt das jetzt?

die karte war nicht geblocked weil es die letzten 2 jahre so lief...

wird es jetzt gar nicht mehr hell? was muss ich tun?
 
AW: sky v13 verlängerung klappt nicht

Wenn Du die EMM bisher noch nicht von der Karte blockst, dann mach das mal schleunigst ...

blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

Evtl. war das EMM 0x34, welches Du zuletzt geschrieben hast, ein Fake-EMM. Hast Du eine Freischaltung gemacht ?

Warte jetzt auf neue EMM und schalte einen sky - Sender ein - die Karte hat keine enties mehr und muss verlängert werden.
 
AW: sky v13 verlängerung klappt nicht

Ich glaube leider das ist vergebene Liebesmühe.
 
AW: sky v13 verlängerung klappt nicht

block ist drinnen

blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

hänge in der telefon schleife, mache jetzt die freischaltung nochmal
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

gelöst SRG Viaccess v6 – EMM-Verlängerungen werden nicht korrekt geschrieben
5 6 7
Antworten
94
Aufrufe
3K
Sky4
E
HD02 Dunkel und ich finde den Fehler in der Konfig nicht
Antworten
12
Aufrufe
620
telecomic
J
Umstellung von D02 auf G02
Antworten
3
Aufrufe
858
adas
N
  • Gesperrt
Einige Sky Sender dunkel bei KabelBW
Antworten
1
Aufrufe
4K
Pilot
P
F
  • Gesperrt
G02 Sky rejected group (0 ms) (no matching reader)
Antworten
4
Aufrufe
2K
Pilot
P
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…