S02 Cardserver

Hi Team,
ich möchte mir ein SKY S02 Abo kaufen! Damit aber auch i-netsharen.
Hadware:
Fritzbox SL W-Lan (ist diese DYN-DNS fähig)
Nokia Dbox2 Sat (Multicam verbaut (oberer schacht)
Fragen:
Ist diese Config okay?
Kann ich Oscam allein verwenden damit ich später ne Cline hab?
Ist folgende oscam okay?


Reicht nicht eigentlich folgende Config für die Server Box:

oscam.server:

[reader]
label = reader1
protocol = internal
detect = CD
device = /dev/tts/1
group = 1
emmcache = 1,3,2
mhz = 600
cardmhz = 600
caid = 1702

oscam.conf:

[global]
nice = -1
WaitForCards = 1

# logging

pidfile = /var/run/oscam.pid
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
port = 12000
aulow = 120
monlevel = 1

# protocols

[newcamd]
key = 0102030405060708091011121314
port= 12000@1702:000000

oscam.user:

[account]
user =freund1
pwd =freunds1
monlevel = 0
uniq = 1
group = 1
au = reader1
ident = 1702:000000
caid = 1702; 1833


Client box:
C: cardsharing.dyndns.org 12000 freund1 freunds1


Der dyndns name ist nur ein Beispiel!

Danke für die Antworten!!

AW: S02 Cardserver

moin,

bei reader sollte das protocol mouse stehen

Optionale Einstellungen für den Reader in der oscam.server
Protocol = internal

• Device = /dev/sci0 => IPBox-HD/Dreambox mit einem Slot oder unterem Slot, VU+Duo oberer Slot
• Device = /dev/sci1 => IPBox-HD/Dreambox oberer Slot
• Device = /dev/sci2 => Common-Interface (CI)
• Device = /dev/scard => AZBox Elite/Premium
• Device = 0 => Coolstream unten
• Device = 1 => Coolstream oben

Protocol = mouse

• Device = /dev/tts/0 => DBox2 Cardreader
• Device = /dev/tts/1 => DBox2 Multicam
• Device = /dev/ttyUSB0 => Dreambox/Coolstream/Fritz!Box USB-Reader
• Device = /dev/tts/0_0 => Receiver mit SC8in1

AW: S02 Cardserver

Ansonsten wäre auch eine Möglichkeit die DBox2 mit cccam als CardServer versehen - hat den Vorteil cccam kann softcam.keys lesen - und zu cccam und/oder oscam sharen.

Gruß,

Bulldog3001

AW: S02 Cardserver

Bleibt zu bedenken, das es die S02 nicht mehr allzulange geben wird, ich halte oscam für die besser Wahl.

AW: S02 Cardserver

Mag ja sein, dass die S02 bald abgelöst wird, jedoch wird Sky doch bestimmt eine Nachfolge bringen. Ansonsten heißt es ja für Alle S02 Kunden neuen Receiver kaufen oder mieten, damit man weiter Sky empfangen kann mit z.B. einer V13. Da möchte ich dann mal die Statistiken sehen

AW: S02 Cardserver

imo siehts da eher nach ner Verlängerung der Laufzeit der S02 Karten aus, aber auch wenn die S02 wegfällt, ist die OS ja dann die richtige Wahl

die kann eben auch mit der V13 & bietet neben einer Vielfalt an supporteten Karten auch noch entsprechende server-Dienste

wichtig wäre viell noch das eingesetzte MC - mein NG2 verweigert da mit der OS einige Karten, liegt wohl an der automatischen FQ Wahl

AW: S02 Cardserver

OS: KEYWELT
CARDSERVER: OSCAM/CCcam
Multicam: NG2 Nextgerneration

AW: S02 Cardserver

S02 sollte damit funktionieren ... V13 hab ich, wie bereits gesagt, Probleme mit der OS

warum nimmste eigentl ne Kombi OS / CC - die OS beherrscht das CC-Protokoll bestens

AW: S02 Cardserver

ja möchte ich habe auf der box cccam und oscam installiert!

AW: S02 Cardserver

musste ja nciht beide aktivieren, wenn die Box nur als Lieferant dienen soll, genügt die OS - sind zwar ein paar Eingaben mehr, aber funktioniert genauso gut

schau zuerst mal, dass ie KArte dann läuft, dann kannste mit dem server weiter machen

AW: S02 Cardserver

hi,
ne möchte cccam gerne beibehlaten, vorallem wegen den keys
Aber ich bekomme einfach kein bild mit oscam und cccam aktiviert nur mit camd2
und in slot1 mit oscam1.00/cccam2.2.1 aber es soll ja mit multicam laufen!! Und wie nehme ich den reshare raus?
Configs:
Oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = /tmp/oscam.log

[monitor]
port = 988
aulow = 120
monlevel = 1
[webif]
HttpPort = 3001
HttpUser = user
HttpPWD = pass
HttpRefresh = 10
HttpAllowed = 192.168.178.1-192.168.178.255

[newcamd]
key = 0102030405060708091011121314
port = 10001@1833:000000
port= 10002@1702
[cccam]
port = 12000
reshare = 1
ignorereshare = 0
version = 2.1.4
updateinterval = 300
minimizecards = 0

oscam.server


[reader]
Label = S02
Protocol = mouse
Device = /dev/tts/1
Mhz = 600
cardmhz = 600
Detect = CD
Group = 2
CAID = 1702,1833
EMMCache = 1,3,2

oscam.user

[account]
User = user
Pwd = pass
cccmaxhops = 2
cccreshare = 1
Monlevel = 0
Group = 2
Betatunnel = 1833.ffff:1702
AU = 1
[account]
User = user1
Pwd = pass1
Monlevel = 0
Group = 2
Betatunnel = 1833.ffff:1702
AU = 1
cccmaxhops = 2
cccreshare = 1


cccam.cfg

SECA HANDLER: 2
DISABLE EMM : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
F: user1 pass1 10
F: user2 pass2 10
F: user3 pass3 10
N: 127.0.0.1 10001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 10002 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SHOW TIMING : yes
SERVER LISTEN PORT : 12000

newcamd.list:


CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS= 127.0.0.1 10001 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam2
CWS= 127.0.0.1 10002 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam2

AW: S02 Cardserver

mmh.. okay - also ne newcamd.list brauchste schon mal nicht...

für die lokale CC auch kein 1833 - die kann kein HD ... es genügt also ein newcamd-port, den dann aber bitte so:
10001@1702:000000
dazu brauchste auch keinen betatunnel für den user - den setzen neuere OScam`s eh in der conf automatisch ...

dann brauchste dies in der CCcam.cfg auch net:

SECA HANDLER: 2
DISABLE EMM : yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw

Zum Vergrößern anklicken....

die files werden automatisch dort gesucht - seca haste nciht & entfernte updates ebenfalls nciht

dann schau bitte erstmal, ob die Karte im MC läuft - dazu camd2 auf jeden Fall deaktivieren
die OS via telnet starten & prüfen, ob die Karte erkannt wird

checken & Einstellungen anpassen, kannste auch in dem web-if - ist bei Dir unter port 3001 aktiv

AW: S02 Cardserver

Hier mal meine log!!

1970/01/01 2:00:26 4000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4708 (powerpc-tuxbox-linux)
1970/01/01 2:00:26 4000 s version=1.00-unstable_svn, build #4708, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 2:00:26 4000 s client max. idle=120 sec, debug level=0
1970/01/01 2:00:26 4000 s max. logsize=10500 Kb
1970/01/01 2:00:26 4000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
1970/01/01 2:00:27 4000 s auth size=4976
1970/01/01 2:00:27 4000 s services reloaded: 0 services freed, 1 services loaded
1970/01/01 2:00:27 4000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 2:00:27 4000 s signal handling initialized (type=sysv)
1970/01/01 2:00:27 4000 s 110 service-id's loaded
1970/01/01 2:00:27 4000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
1970/01/01 2:00:27 4000 s 4 provid's loaded
1970/01/01 2:00:27 4000 s 1 lengths for caid guessing loaded
1970/01/01 2:00:27 4000 s monitor: initialized (fd=8, port=988)
1970/01/01 2:00:27 4000 s camd33: disabled
1970/01/01 2:00:27 4000 s camd35: disabled
1970/01/01 2:00:27 4000 s cs378x: disabled
1970/01/01 2:00:27 4000 s newcamd: initialized (fd=9, port=10001, crypted)
1970/01/01 2:00:27 4000 s CAID: 1833
1970/01/01 2:00:27 4000 s provid #0: 000000
1970/01/01 2:00:27 4000 s newcamd: initialized (fd=10, port=10002, crypted)
1970/01/01 2:00:27 4000 s cccam: initialized (fd=11, port=12000, crypted)
1970/01/01 2:00:27 4000 s radegast: disabled
1970/01/01 2:00:27 4000 s http thread started
1970/01/01 2:00:27 4000 s creating thread for device /dev/tts/0
1970/01/01 2:00:27 8003 h HTTP Server listening on port 3001
1970/01/01 2:00:27 C004 r reader thread started (thread= C004, label=sky, device=/dev/tts/0, detect=cd, mhz=368, cardmhz=368)
1970/01/01 2:00:27 4000 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 2:00:27 4000 s waiting for local card init
1970/01/01 2:00:29 C004 r sky card detected
1970/01/01 2:00:40 C004 r Error activating card.
1970/01/01 2:00:51 C004 r Error activating card.
2011/10/06 23:56:37 C004 r Error activating card.
2011/10/06 23:56:37 C004 r card initializing error
2011/10/06 23:56:38 4000 s init for all local cards done
2011/10/06 23:56:38 4000 s anti cascading disabled
2011/10/06 23:56:38 10005 c client connected to 10001 port
2011/10/06 23:56:38 14006 c client connected to 10002 port
2011/10/06 23:56:38 14006 c Connection closed to client
2011/10/06 23:56:38 14006 c thread 14006 ended!
2011/10/06 23:56:38 10005 c Connection closed to client
2011/10/06 23:56:38 1C006 c client connected to 10002 port
2011/10/06 23:56:38 18007 c client connected to 10001 port
2011/10/06 23:56:38 1C006 c Connection closed to client
2011/10/06 23:56:38 1C006 c thread 1C006 ended!
2011/10/06 23:56:38 10005 c thread 10005 ended!
2011/10/06 23:56:38 18007 c Connection closed to client
2011/10/06 23:56:38 18007 c thread 18007 ended!
2011/10/06 23:56:38 24005 c client connected to 10002 port
2011/10/06 23:56:38 28006 c client connected to 10001 port
2011/10/06 23:56:38 20008 c client connected to 10001 port
2011/10/06 23:56:38 20008 c Connection closed to client
2011/10/06 23:56:38 20008 c thread 20008 ended!
2011/10/06 23:56:38 28006 c 127.0.0.1: resolved ip=127.0.0.1
2011/10/06 23:56:38 28006 c encrypted newcamd:10001-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:56:38 28006 c user user authenticated successfully (CCcam)
2011/10/06 23:56:38 28006 c AU disabled for user user
2011/10/06 23:56:39 24005 c Connection closed to client
2011/10/06 23:56:39 24005 c thread 24005 ended!
2011/10/06 23:56:46 2C005 c client connected to 10002 port
2011/10/06 23:56:46 2C005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:56:46 2C005 c user user authenticated successfully (CCcam)
2011/10/06 23:56:46 2C005 c AU disabled for user user
2011/10/06 23:56:48 2C005 c Connection closed to client
2011/10/06 23:56:48 2C005 c user disconnected from 127.0.0.1
2011/10/06 23:56:48 2C005 c thread 2C005 ended!
2011/10/06 23:56:57 30005 c client connected to 10002 port
2011/10/06 23:56:57 30005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:56:57 30005 c user user authenticated successfully (CCcam)
2011/10/06 23:56:57 30005 c AU disabled for user user
2011/10/06 23:56:58 30005 c Connection closed to client
2011/10/06 23:56:58 30005 c user disconnected from 127.0.0.1
2011/10/06 23:56:58 30005 c thread 30005 ended!
2011/10/06 23:57:08 34005 c client connected to 10002 port
2011/10/06 23:57:09 34005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:57:09 34005 c user user authenticated successfully (CCcam)
2011/10/06 23:57:09 34005 c AU disabled for user user
2011/10/06 23:57:10 34005 c Connection closed to client
2011/10/06 23:57:10 34005 c user disconnected from 127.0.0.1
2011/10/06 23:57:10 34005 c thread 34005 ended!
2011/10/06 23:57:19 38005 c client connected to 10002 port
2011/10/06 23:57:19 38005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:57:19 38005 c user user authenticated successfully (CCcam)
2011/10/06 23:57:19 38005 c AU disabled for user user
2011/10/06 23:57:21 38005 c Connection closed to client
2011/10/06 23:57:21 38005 c user disconnected from 127.0.0.1
2011/10/06 23:57:21 38005 c thread 38005 ended!
2011/10/06 23:57:30 3C005 c client connected to 10002 port
2011/10/06 23:57:30 3C005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:57:30 3C005 c user user authenticated successfully (CCcam)
2011/10/06 23:57:30 3C005 c AU disabled for user user
2011/10/06 23:57:31 3C005 c Connection closed to client
2011/10/06 23:57:31 3C005 c user disconnected from 127.0.0.1
2011/10/06 23:57:31 3C005 c thread 3C005 ended!
2011/10/06 23:57:40 40005 c client connected to 10002 port
2011/10/06 23:57:41 40005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:57:41 40005 c user user authenticated successfully (CCcam)
2011/10/06 23:57:41 40005 c AU disabled for user user
2011/10/06 23:57:42 40005 c Connection closed to client
2011/10/06 23:57:42 40005 c user disconnected from 127.0.0.1
2011/10/06 23:57:42 40005 c thread 40005 ended!
2011/10/06 23:57:51 44005 c client connected to 10002 port
2011/10/06 23:57:51 44005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:57:51 44005 c user user authenticated successfully (CCcam)
2011/10/06 23:57:51 44005 c AU disabled for user user
2011/10/06 23:57:52 44005 c Connection closed to client
2011/10/06 23:57:52 44005 c user disconnected from 127.0.0.1
2011/10/06 23:57:52 44005 c thread 44005 ended!
2011/10/06 23:58:01 48005 c client connected to 10002 port
2011/10/06 23:58:02 48005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:58:02 48005 c user user authenticated successfully (CCcam)
2011/10/06 23:58:02 48005 c AU disabled for user user
2011/10/06 23:58:03 48005 c Connection closed to client
2011/10/06 23:58:03 48005 c user disconnected from 127.0.0.1
2011/10/06 23:58:03 48005 c thread 48005 ended!
2011/10/06 23:58:13 4C005 c client connected to 10002 port
2011/10/06 23:58:13 4C005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:58:13 4C005 c user user authenticated successfully (CCcam)
2011/10/06 23:58:13 4C005 c AU disabled for user user
2011/10/06 23:58:14 4C005 c Connection closed to client
2011/10/06 23:58:14 4C005 c user disconnected from 127.0.0.1
2011/10/06 23:58:14 4C005 c thread 4C005 ended!
2011/10/06 23:58:23 50005 c client connected to 10002 port
2011/10/06 23:58:23 50005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:58:23 50005 c user user authenticated successfully (CCcam)
2011/10/06 23:58:23 50005 c AU disabled for user user
2011/10/06 23:58:25 50005 c Connection closed to client
2011/10/06 23:58:25 50005 c user disconnected from 127.0.0.1
2011/10/06 23:58:25 50005 c thread 50005 ended!
2011/10/06 23:58:35 54005 c client connected to 10002 port
2011/10/06 23:58:35 54005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:58:35 54005 c user user authenticated successfully (CCcam)
2011/10/06 23:58:35 54005 c AU disabled for user user
2011/10/06 23:58:36 54005 c Connection closed to client
2011/10/06 23:58:36 54005 c user disconnected from 127.0.0.1
2011/10/06 23:58:36 54005 c thread 54005 ended!
2011/10/06 23:58:46 58005 c client connected to 10002 port
2011/10/06 23:58:46 58005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:58:46 58005 c user user authenticated successfully (CCcam)
2011/10/06 23:58:46 58005 c AU disabled for user user
2011/10/06 23:58:47 58005 c Connection closed to client
2011/10/06 23:58:47 58005 c user disconnected from 127.0.0.1
2011/10/06 23:58:47 58005 c thread 58005 ended!
2011/10/06 23:58:57 5C005 c client connected to 10002 port
2011/10/06 23:58:58 5C005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:58:58 5C005 c user user authenticated successfully (CCcam)
2011/10/06 23:58:58 5C005 c AU disabled for user user
2011/10/06 23:58:59 5C005 c Connection closed to client
2011/10/06 23:58:59 5C005 c user disconnected from 127.0.0.1
2011/10/06 23:58:59 5C005 c thread 5C005 ended!
2011/10/06 23:59:08 60005 c client connected to 10002 port
2011/10/06 23:59:08 60005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:59:08 60005 c user user authenticated successfully (CCcam)
2011/10/06 23:59:08 60005 c AU disabled for user user
2011/10/06 23:59:09 60005 c Connection closed to client
2011/10/06 23:59:09 60005 c user disconnected from 127.0.0.1
2011/10/06 23:59:09 60005 c thread 60005 ended!
2011/10/06 23:59:19 64005 c client connected to 10002 port
2011/10/06 23:59:19 64005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:59:19 64005 c user user authenticated successfully (CCcam)
2011/10/06 23:59:19 64005 c AU disabled for user user
2011/10/06 23:59:20 64005 c Connection closed to client
2011/10/06 23:59:20 64005 c user disconnected from 127.0.0.1
2011/10/06 23:59:20 64005 c thread 64005 ended!
2011/10/06 23:59:30 68005 c client connected to 10002 port
2011/10/06 23:59:31 68005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:59:31 68005 c user user authenticated successfully (CCcam)
2011/10/06 23:59:31 68005 c AU disabled for user user
2011/10/06 23:59:32 68005 c Connection closed to client
2011/10/06 23:59:32 68005 c user disconnected from 127.0.0.1
2011/10/06 23:59:32 68005 c thread 68005 ended!
2011/10/06 23:59:41 6C005 c client connected to 10002 port
2011/10/06 23:59:41 6C005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:59:41 6C005 c user user authenticated successfully (CCcam)
2011/10/06 23:59:41 6C005 c AU disabled for user user
2011/10/06 23:59:42 6C005 c Connection closed to client
2011/10/06 23:59:42 6C005 c user disconnected from 127.0.0.1
2011/10/06 23:59:42 6C005 c thread 6C005 ended!
2011/10/06 23:59:52 70005 c client connected to 10002 port
2011/10/06 23:59:52 70005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/06 23:59:52 70005 c user user authenticated successfully (CCcam)
2011/10/06 23:59:52 70005 c AU disabled for user user
2011/10/06 23:59:54 70005 c Connection closed to client
2011/10/06 23:59:54 70005 c user disconnected from 127.0.0.1
2011/10/06 23:59:54 70005 c thread 70005 ended!
2011/10/07 0:00:03 74005 c client connected to 10002 port
2011/10/07 0:00:03 74005 c encrypted newcamd:10002-client 127.0.0.1 granted (user, au=auto (1 reader))
2011/10/07 0:00:03 74005 c user user authenticated successfully (CCcam)
2011/10/07 0:00:03 74005 c AU disabled for user user
2011/10/07 0:00:04 74005 c Connection closed to client
2011/10/07 0:00:04 74005 c user disconnected from 127.0.0.1
2011/10/07 0:00:04

AW: S02 Cardserver

Karte wird nciht erkannt . was haste jetzt in der oscam.server?

probier bitte so:

[reader]
abel = skys02
protocol = mouse
device = /dev/tts/1
detect = CD
mhz = 600
cardmhz = 600
group = 1
CAID = 1702
EMMCache = 1,3,2

Zum Vergrößern anklicken....

AW: S02 Cardserver

jo läuft!!!! OKAY DANKE!!