Probleme mit der Verbindung OSCAM + CCcam

xetic · 24. Januar 2011

Hi,

kriege es nicht hin CCcam mit OScam zu verbinden. Verwende eine I02 Karte von UM

OSCAM:

Code:

xetic@Sammy:/usr/local/bin$ sudo ./oscam-0.99.4svn924-i686-pc-linux-smargopatch 2011/01/24 21:19:46   2056 s   >> OSCam <<  cardserver started version 0.99.4svn, build #924 (i686-pc-linux)
2011/01/24 21:19:46   2056 s   auth size=4736
2011/01/24 21:19:46   2056 s   Cannot open file "/usr/local/etc/oscam.services" (errno=2)
2011/01/24 21:19:46   2056 s   userdb reloaded: 0 accounts freed, 1 accounts loaded
2011/01/24 21:19:46   2056 s   signal handling initialized (type=sysv)
2011/01/24 21:19:46   2056 s   can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2011/01/24 21:19:46   2056 s   monitor: initialized (fd=5, port=988)
2011/01/24 21:19:46   2056 s   camd 3.3x: disabled
2011/01/24 21:19:46   2056 s   camd 3.5x: disabled
2011/01/24 21:19:46   2056 s   cs378x: disabled
2011/01/24 21:19:46   2056 s   newcamd: initialized (fd=6, port=34000, crypted)
2011/01/24 21:19:46   2056 s   CAID: 1722
2011/01/24 21:19:46   2056 s   provid #0: 000000
2011/01/24 21:19:46   2056 s   radegast: disabled
2011/01/24 21:19:46   2056 s   resolver thread started
2011/01/24 21:19:46   2056 s   logger started (pid=2058)
2011/01/24 21:19:46   2056 s   resolver started (pid=2059, delay=30 sec)
2011/01/24 21:19:46   2056 s   reader started (pid=2060, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/01/24 21:19:46   2056 s   Waiting for local card init ....
2011/01/24 21:19:49   2056 s   Init for all local cards done !
2011/01/24 21:19:49   2056 s   anti cascading disabled
2011/01/24 21:19:58   2060 r02 card detected
2011/01/24 21:20:05   2056 s   client(1) connect from 127.0.0.1 (pid=2066, pipfd=12)
2011/01/24 21:20:05   2066 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=unity)
2011/01/24 21:20:05   2066 c01 user user authenticated successfully (using client 4343)
2011/01/24 21:20:05   2066 c01 AU wont be used on this port -> disable AU
2011/01/24 21:20:18   2066 c01 Connection closed to client
2011/01/24 21:20:18   2066 c01 user disconnected from 127.0.0.1
2011/01/24 21:20:18   2056 s   client(2) connect from 127.0.0.1 (pid=2069, pipfd=13)
2011/01/24 21:20:18   2069 c02 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=unity)
2011/01/24 21:20:18   2069 c02 user user authenticated successfully (using client 4343)
2011/01/24 21:20:18   2069 c02 AU wont be used on this port -> disable AU
2011/01/24 21:20:24   2069 c02 Connection closed to client
2011/01/24 21:20:24   2069 c02 user disconnected from 127.0.0.1
2011/01/24 21:20:24   2056 s   client(1) connect from 127.0.0.1 (pid=2070, pipfd=12)
2011/01/24 21:20:24   2070 c01 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=unity)
2011/01/24 21:20:24   2070 c01 user user authenticated successfully (using client 4343)
2011/01/24 21:20:24   2070 c01 AU wont be used on this port -> disable AU
2011/01/24 21:20:30   2070 c01 Connection closed to client
2011/01/24 21:20:30   2070 c01 user disconnected from 127.0.0.1
2011/01/24 21:20:30   2056 s   client(2) connect from 127.0.0.1 (pid=2071, pipfd=13)
2011/01/24 21:20:30   2071 c02 encrypted newcamd:34000-client 127.0.0.1 granted (user, au=unity)
2011/01/24 21:20:30   2071 c02 user user authenticated successfully (using client 4343)
2011/01/24 21:20:30   2071 c02 AU wont be used on this port -> disable AU
2011/01/24 21:20:32   2071 c02 Connection closed to client
2011/01/24 21:20:32   2071 c02 user disconnected from 127.0.0.1

CCcam

Code:

21:20:04.635 CCcam: ======================================================================
21:20:04.635 CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@17:00:48
21:20:04.635 CCcam: ======================================================================
21:20:04.636 CCcam: online using nodeId 6e84a5dc6d36d4e3
21:20:04.637 CCcam: create 1 cam device(s)
21:20:04.664 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
21:20:04.664 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
21:20:04.664 CCcam: static cw not found or bad
21:20:04.676 CCcam: parsed 1153 entries from /var/etc/CCcam.prio
21:20:04.685 CCcam: added 1284 provider names from /var/etc/CCcam.providers
21:20:05.003 CCcam: added 9478 channel names from /var/etc/CCcam.channelinfo
21:20:05.003 CCcam: server started on port xxx
21:20:05.005 CCcam: newcamd server 127.0.0.1:34000 user: user
21:20:05.014 CCcam: newcamd caid 1722 providers 1 userid: 0
21:20:05.014 CCcam: newcamd card serial:    00000000
21:20:05.014 CCcam: newcamd prov 00 000000  00000000
21:20:05.766 CCcam: login from 192.168.1.17
21:20:05.771 CCcam: user xxx login attempt from 192.168.1.17
21:20:05.774 CCcam: client xxx@2e4529856ed98541, running CCcam 2.0.11
21:20:10.668 CCcam: login from 192.168.1.18
21:20:10.671 CCcam: user xxx2 login attempt from 192.168.1.18
21:20:10.673 CCcam: client xxx2@393d972cbc651ed2, running CCcam 2.0.11
21:20:13.936 CCcam: newcamd ecm -> 127.0.0.1:34000
21:20:17.940 CCcam: newcamd first read failed -1
21:20:17.940 CCcam: newcamd ecm <- 127.0.0.1:34000 connection error
21:20:17.941 CCcam: client xxx ecm request for handler 0x64 0x1722(0x0) sid 0x5a44 ok: 0
21:20:17.941 CCcam: client xxx2 ecm request for handler 0x64 0x1722(0x0) sid 0xa ok: 0
21:20:18.947 CCcam: newcamd server 127.0.0.1:34000 user: user
21:20:18.962 CCcam: newcamd caid 1722 providers 1 userid: 0
21:20:18.962 CCcam: newcamd card serial:    00000000
21:20:18.962 CCcam: newcamd prov 00 000000  00000000
21:20:19.038 CCcam: newcamd ecm -> 127.0.0.1:34000
21:20:23.043 CCcam: newcamd first read failed -1
21:20:23.043 CCcam: newcamd ecm <- 127.0.0.1:34000 connection error
21:20:23.043 CCcam: client xxx ecm request for handler 0x65 0x1722(0x0) sid 0x5a44 ok: 0
21:20:24.048 CCcam: newcamd server 127.0.0.1:34000 user: user
21:20:24.068 CCcam: newcamd caid 1722 providers 1 userid: 0
21:20:24.068 CCcam: newcamd card serial:    00000000
21:20:24.068 CCcam: newcamd prov 00 000000  00000000
21:20:25.798 CCcam: newcamd ecm -> 127.0.0.1:34000
21:20:29.801 CCcam: newcamd first read failed -1
21:20:29.801 CCcam: newcamd ecm <- 127.0.0.1:34000 connection error
21:20:29.802 CCcam: client xxx2 ecm request for handler 0x66 0x1722(0x0) sid 0xa ok: 0
21:20:29.802 CCcam: client xxx ecm request for handler 0x66 0x1722(0x0) sid 0x5a44 ok: 0
21:20:30.808 CCcam: newcamd server 127.0.0.1:34000 user: user
21:20:30.826 CCcam: newcamd caid 1722 providers 1 userid: 0
21:20:30.826 CCcam: newcamd card serial:    00000000
21:20:30.826 CCcam: newcamd prov 00 000000  00000000
21:20:31.003 CCcam: newcamd ecm -> 127.0.0.1:34000

oscam.conf

Code:

[global]
LogFile = stdout
nice = -1
WaitForCards = 1

[monitor]
port = 988
aulow = 120
monlevel = 1

#newcamd Unitymedia I02
[newcamd]
port = 34000@1722:000000
key = 0102030405060708091011121314

oscam.server

Code:

[reader]
label = unity
protocol = smartreader
detect = CD
device = /dev/ttyUSB0
group = 1
emmcache = 1,3,2
mhz = 600
cardmhz = 600

oscam.user

Code:

[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 1722,1801
ident = 1722:000000
monlevel = 0
AU = unity
betatunnel = 1801.FFFF:1722

CCcam.cfg

Code:

#CCcam.cfg
#######CLIENTS###############
#
F: xxx pass 192.168.1.21
#
F: xxx2 pass 192.168.1.18
#
#############################
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER LISTEN PORT : xxx
#SERIAL READER : /dev/ttyUSB0 smartreader+
#DISABLE EMM : yes

#WEB INFO
############################
WEBINFO LISTEN PORT : xxx
WEBINFO USERNAME : xxx
WEBINFO PASSWORD : xxx
~

Weis leider nicht weiter... google hat mir auch nicht geholfen :-(
Hoffe Ihr könnt mir helfen

Ben345 · 24. Januar 2011

AW: Probleme mit der Verbindung OSCAM + CCcam

Hi,

hier solltest du die komplette config finden:
https://www.digital-eliteboard.com/f886/sky-sport-hd-wird-mit-i02-nicht-hell-112240/#post829810

protocol unter reader, evtl. Pfade noch anpassen und die logfile würde ich auskommentieren...

mfg

xetic · 24. Januar 2011

AW: Probleme mit der Verbindung OSCAM + CCcam

Ben345 schrieb:
Hi,

hier solltest du die komplette config finden:
https://www.digital-eliteboard.com/f886/sky-sport-hd-wird-mit-i02-nicht-hell-112240/#post829810

protocol unter reader, evtl. Pfade noch anpassen und die logfile würde ich auskommentieren...

mfg

Ja genau danach bin ich gegangen...
Gibt es keine aktuelle Version für Linux x86 und nicht die 64Bit Version?

EDIT: Habe heute nochmal in der Datenbase nachgeschaut und habe eine neuere Version gefunden mit smargopatch.
Werde heute mittag nochmal ausprobieren.

Ben345 · 25. Januar 2011

AW: Probleme mit der Verbindung OSCAM + CCcam

ok, ich schick dir trotzdem mal einen link...

mfg

Suche

Suche

Probleme mit der Verbindung OSCAM + CCcam

xetic

Board Guru

Ben345

Ist oft hier

xetic

Board Guru

Ben345

Ist oft hier

Ähnliche Themen

Spenden Unterstützung