problem nagra card help me please

[peppe_76]

Hello everyone I have a problem with a card nagra3 caid 1802 rom242 error card not supported ...
I have a 2 darkstar imagen dream500s with any suggestions?
with friendly greetings thanks

Warning: keyword 'pidfile' in global section not recognized
1970/01/01 0:03:19 300162B0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4803 (powerpc-tuxbox-linux)
1970/01/01 0:03:19 300162B0 s version=1.00-unstable_svn, build #4803, system=powerpc-tuxbox-linux, nice=-1
1970/01/01 0:03:19 300162B0 s client max. idle=120 sec, debug level=0
1970/01/01 0:03:19 300162B0 s max. logsize=10 Kb
1970/01/01 0:03:19 300162B0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
1970/01/01 0:03:19 300162B0 s auth size=4976
1970/01/01 0:03:19 300162B0 s services reloaded: 0 services freed, 20 services loaded
Configuration reader: corrected label to dish_mexico_77w
Warning: keyword 'n3_boxkey' in reader section not recognized
1970/01/01 0:03:19 300162B0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
1970/01/01 0:03:19 300162B0 s signal handling initialized (type=sysv)
1970/01/01 0:03:19 300162B0 s 449 service-id's loaded
1970/01/01 0:03:19 300162B0 s 37 tier-id's loaded
1970/01/01 0:03:19 300162B0 s 1000 provid's loaded
1970/01/01 0:03:19 300162B0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
1970/01/01 0:03:19 300162B0 s monitor: disabled
1970/01/01 0:03:19 300162B0 s camd33: disabled
1970/01/01 0:03:19 300162B0 s camd35: disabled
1970/01/01 0:03:19 300162B0 s cs378x: disabled
1970/01/01 0:03:19 300162B0 s newcamd: initialized (fd=5, port=50000, crypted)
1970/01/01 0:03:19 300162B0 s CAID: 1802
1970/01/01 0:03:19 300162B0 s provid #0: 000000
1970/01/01 0:03:19 300162B0 s newcamd: initialized (fd=6, port=50001, crypted)
1970/01/01 0:03:19 300162B0 s CAID: 1800
1970/01/01 0:03:19 300162B0 s provid #0: 000000
1970/01/01 0:03:19 300162B0 s cccam: disabled
1970/01/01 0:03:19 300162B0 s radegast: disabled
1970/01/01 0:03:19 300162B0 s http thread started
1970/01/01 0:03:19 300162B0 s creating thread for device /dev/sci0
1970/01/01 0:03:19 300162B0 s loadbalancer: can't read from file /tmp/.oscam/stat
1970/01/01 0:03:19 300162B0 s waiting for local card init
1970/01/01 0:03:19 31025B50 h HTTP Server listening on port 8180
1970/01/01 0:03:19 31825B50 r reader thread started (thread=31825B50, label=dish_mexico_77w, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
1970/01/01 0:03:19 31825B50 r dish_mexico_77w card detected
1970/01/01 0:03:20 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
1970/01/01 0:03:21 31825B50 r ATR: XX XX XX XX XX91 81 71 FE 47 00 44 4E 41 53 50 32 34 32 20 52 65 76 XX XX XX XX
1970/01/01 0:03:22 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
1970/01/01 0:03:23 31825B50 r detect native nagra card
1970/01/01 0:03:23 31825B50 r -----------------------------------------
1970/01/01 0:03:23 31825B50 r |id |tier |valid from |valid to |
1970/01/01 0:03:23 31825B50 r +----+--------+------------+------------+
1970/01/01 0:03:23 31825B50 r |6311|0014 |2011/06/15 |2011/08/19 |
1970/01/01 0:03:23 31825B50 r |6311|001E |2011/06/15 |2011/08/19 |
1970/01/01 0:03:23 31825B50 r |6311|000A |2011/06/15 |2011/08/19 |
1970/01/01 0:03:23 31825B50 r -----------------------------------------
1970/01/01 0:03:23 31825B50 r card system not supported
1970/01/01 0:03:23 31825B50 r Normal mode failed, reverting to Deprecated Mode
1970/01/01 0:03:24 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
1970/01/01 0:03:25 31825B50 r ATR: XX XX XX XX XX 81 71 FE 47 00 44 4E 41 53 50 32 34 32 20 52 65 76 39 XX XX XX XX
1970/01/01 0:03:26 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
1970/01/01 0:03:28 31825B50 r detect native nagra card
1970/01/01 0:03:37 31825B50 r card system not supported
1970/01/01 0:03:37 31825B50 r card initializing error
1970/01/01 0:03:37 300162B0 s init for all local cards done
1970/01/01 0:03:37 300162B0 s anti cascading disabled
1970/01/01 0:03:37 32025B50 c client connected to 50000 port
1970/01/01 0:03:37 32025B50 c Connection closed to client
1970/01/01 0:03:37 32025B50 c thread 32025B50 ended!
1970/01/01 0:03:37 32025B50 c thread 32025B50 exit!
1970/01/01 0:03:37 32825B50 c client connected to 50001 port
1970/01/01 0:03:37 32825B50 c Connection closed to client
1970/01/01 0:03:37 32825B50 c thread 32825B50 ended!
1970/01/01 0:03:37 32825B50 c thread 32825B50 exit!
1970/01/01 0:03:37 33025B50 c client connected to 50001 port
1970/01/01 0:03:37 33025B50 c encrypted newcamd:50001-client 192.168.1.153 granted (CCcam1802, au=off)
1970/01/01 0:03:37 33025B50 c user CCcam1802 authenticated successfully (CCcam)
1970/01/01 0:03:37 33025B50 c AU disabled for user CCcam1802
1970/01/01 0:03:39 32825B50 c client connected to 50000 port
1970/01/01 0:03:39 32825B50 c encrypted newcamd:50000-client 192.168.1.153 granted (CCcam1800, au=off)
1970/01/01 0:03:39 32825B50 c user CCcam1800 authenticated successfully (CCcam)
1970/01/01 0:03:39 32825B50 c AU disabled for user CCcam1800

 

[kotzmaster]

AW: problem nagra card help me please

you should remove the ATR first!
it is unique to your smartcard,
so u could get caught, if u don't remove!

ur second problem is:
card system not supported

i do not know your kind of your smartcard
and i am not a proffessional, but maybe
there are more settings to set for your
card like boxkey and rsakey

 

[GTD Bastion]

AW: problem nagra card help me please

frist...No Config no Help.
Second: Maybe the Dish Mexico is not supported.

Try cardmhz and mhz 368 and search for boxkey etc....use google.

 

[peppe_76]

This configuration and my thanks for the reply ...
How do I remove the ATR?
... greetings

[reader]
Label = Dish Mexico 77W
protocol = internal
detect = CD
device = /dev/sci0
blocknano = all
fix9993 = 0
nagra_read = 2
group = 1
lb_weight = 100
mhz = 500
Fallback = 0
emmcache = 1,3,2
deprecated =1
caid = 1802,1800
ident = 1802:006311,6211
boxkey = XXXXBC8F8F51XXX

 

[werauchsonst]

AW: problem nagra card help me please

He means in your post!!! The ATR is unique and everyone know´s who is the owner of the Card.

 

[GTD Bastion]

AW: problem nagra card help me please

Change yout Time on the Server.
This may cause the Trouble:

1970/01/01 0:03:19

 

[marcus.past]

AW: problem nagra card help me please

also try without deprecated and for nagra you can try this:

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

 

[dumbshitaward]

Not exactly sure here, but could it be that you're missing the RSA key?

I guess you've changed "n3_boxkey", being the older command to the new "boxkey" (as you got the "Warning: keyword 'n3_boxkey' in reader section not recognized" in your log). I take it the boxkey is correct.

Try setting the clock speed to 368 or 357 (depending on your reader), if that doesn't do the trick try updatingto a new OScam build.

Actually I've never seen Oscam do anything like that, usually it doesn't even get the entitlements from the smartcard before reporting "cardsystem not supported" but that may just be my lack of experience.

Good luck, anyhow.

 

[peppe_76]

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Hi thanks for responding and thanks to all ... ok I will try now and as you say you know thank you lighthouse