Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

[cobra2005]

Habe ein Futro a240 mit Debian6.0.4(squeeze). Zwei Karten von (Sky und Tnk) laufen ohne Problem aber die dritte von HD+ will nicht.
Alle Karten sind im Smargo und direkt an Server angeschlossen ohne HUB.
Server ist Oscam 0.99.4 CCcam 2.1.1
HD+ Karte ist im Smargo mit fw 1.5 (fixed, 3.68, normal, 0, 0)
Meine configs sehen so aus und oscam.log.:

oscam.log

Spoiler

>> OSCam << cardserver started at Mon Feb 20 09:04:24 2012
-------------------------------------------------------------------------------
2012/02/20 9:04:24 1366 s version=0.99.4svn, build #3035, system=i686-pc-linux, nice=-1
2012/02/20 9:04:24 1366 s max. clients=509, client max. idle=120 sec
2012/02/20 9:04:24 1366 s max. logsize=4096 Kb
2012/02/20 9:04:24 1366 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/02/20 9:04:24 1366 s shared memory initialized (size=4338546, id=0)
2012/02/20 9:04:24 1366 s auth size=4772
2012/02/20 9:04:24 1366 s services reloaded: 0 services freed, 14 services loaded
2012/02/20 9:04:24 1366 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
2012/02/20 9:04:24 1366 s signal handling initialized (type=sysv)
2012/02/20 9:04:24 1366 s 255 service-id's loaded
2012/02/20 9:04:24 1366 s 11 tier-id's loaded
2012/02/20 9:04:24 1366 s 1 provid's loaded
2012/02/20 9:04:24 1381 s monitor: disabled
2012/02/20 9:04:24 1381 s camd 3.3x: disabled
2012/02/20 9:04:24 1381 s camd 3.5x: disabled
2012/02/20 9:04:24 1381 s cs378x: disabled
2012/02/20 9:04:24 1381 s newcamd: initialized (fd=6, port=22000, crypted)
2012/02/20 9:04:24 1381 s CAID: 1702
2012/02/20 9:04:24 1381 s provid #0: 000000
2012/02/20 9:04:24 1381 s newcamd: initialized (fd=7, port=22001, crypted)
2012/02/20 9:04:24 1381 s CAID: 1843
2012/02/20 9:04:24 1381 s provid #0: 000000
2012/02/20 9:04:24 1381 s provid #1: 003411
2012/02/20 9:04:24 1381 s provid #2: 008011
2012/02/20 9:04:24 1381 s newcamd: initialized (fd=8, port=22002, crypted)
2012/02/20 9:04:24 1381 s CAID: 0B00
2012/02/20 9:04:24 1381 s provid #0: 000000
2012/02/20 9:04:24 1381 s cccam: disabled
2012/02/20 9:04:24 1381 s radegast: disabled
2012/02/20 9:04:24 1381 s logger started (pid=1383)
2012/02/20 9:04:24 1381 s http started (pid=1384)
2012/02/20 9:04:24 1381 s reader started (pid=1385, device=Serial:Reader 209, detect=cd, mhz=600, cardmhz=600)
2012/02/20 9:04:24 1381 s reader started (pid=1386, device=Serial:Reader 7E1A78A, detect=cd, mhz=369, cardmhz=369)
2012/02/20 9:04:24 1381 s reader started (pid=1387, device=002:004, detect=cd, mhz=480, cardmhz=357)
2012/02/20 9:04:24 1384 h HTTP Server listening on port 16005
2012/02/20 9:04:24 1381 s waiting for local card init
2012/02/20 9:04:24 1387 r04 Found smartreader device 002:004
2012/02/20 9:04:24 1386 r03 Found reader with serial Reader 7E1A78A at 002:002
2012/02/20 9:04:24 1385 r02 Found reader with serial Reader 209 at 002:003
2012/02/20 9:04:24 1385 r02 Found smartreader device Serial:Reader 209
2012/02/20 9:04:24 1386 r03 Found smartreader device Serial:Reader 7E1A78A
2012/02/20 9:04:24 1387 r04 card detected
2012/02/20 9:04:24 1385 r02 card detected
2012/02/20 9:04:24 1386 r03 card detected
2012/02/20 9:04:26 1387 r04 ATR: 3B ............ 30
2012/02/20 9:04:26 1387 r04 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2012/02/20 9:04:27 1387 r04 type: Conax, caid: 0B00, serial: 2...............3, hex serial: 7...........f, card: v64
2012/02/20 9:04:27 1387 r04 Providers: 1
2012/02/20 9:04:27 1387 r04 Provider: 1 Provider-Id: 000000
2012/02/20 9:04:27 1387 r04 Provider: 1 SharedAddress: 0.............B
2012/02/20 9:04:27 1387 r04 Package: 1, id: 1010, date: 2012/02/01 - 2012/02/29, name: TVN
2012/02/20 9:04:28 1387 r04 [conax-reader] ready for requests
2012/02/20 9:04:28 1386 r03 ATR: 3F ............................... 28
2012/02/20 9:04:28 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/02/20 9:04:30 1386 r03 detect native nagra card
2012/02/20 9:04:30 1385 r02 ATR: 3B ................................ 6D
2012/02/20 9:04:31 1385 r02 Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/02/20 9:04:32 1385 r02 detect irdeto tunneled nagra card
2012/02/20 9:04:32 1385 r02 no rsa key configured -> using irdeto mode
2012/02/20 9:04:32 1385 r02 detect irdeto card
2012/02/20 9:04:32 1385 r02 caid: 1702, acs: 3.84, country code: GER
2012/02/20 9:04:32 1385 r02 providers: 4, ascii serial: 0................2, hex serial: 7............2, hex base: 1A
2012/02/20 9:04:35 1385 r02 active providers: 2 (000000,000000)
2012/02/20 9:04:35 1385 r02 entitlements for provider: 2, id: 000000
2012/02/20 9:04:35 1385 r02 chid: 0107, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 0108, date: 2008/01/19 - 2008/01/21

cccam.cfg

Spoiler

N: 127.0.0.1 22000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 22001 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 22002 user2 pass2 01 02 03 04 05 06 07 08 09 10 11 12 13 14

F: xxx xxxxxxxxx 3 0 0 { 0:0:1 }
F: yyyyy yyyyyy 3 0 0 { 0:0:1 }
F: ddddd dddddd 3 0 0 { 0:0:1 }
F: mmm mmmmm 3 0 0 { 0:0:1 }

CAID PRIO FILE : /var/keys/CCcam.prio
PROVIDERINFO FILE : /var/keys/CCcam.providers
CHANNELINFO FILE : /var/keys/CCcam.channelinfo

SERVER LISTEN PORT : 12000

WEBINFO LISTEN PORT : 16004
WEBINFO USERNAME : xxxxx
WEBINFO PASSWORD : xxxxx

#Lokale Karten - (Smargo Reader)
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+

#Allgemeine Einstellungen
ALLOW TELNETINFO: no
MINIMUM DOWNHOPS: 1
DISABLE EMM : no
EXTRA EMM LEVEL : no
SHOW TIMING : yes

oscam.server

Spoiler

[reader]
label = sky
enable = 1
protocol = smartreader
device = Serial:Reader 209
services = skyde,skyall,skywelt,skymusicchoiceextra,skycinema,skysport,skybundesliga,skyselect,skyhd,skyweltextra,bluemovie,skysonstige
caid = 1702,1833
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 600
ident =
group = 1
emmcache = 1,3,2
ecmcache = 0
lb_weight = 100


[reader]
label = hd+
enable = 1
protocol = smartreader
device = Serial:Reader 7E1A78A
services = hdplus
smargopatch = 1
caid = 1843
rsakey = BF.....D5
boxkey = A......C
detect = cd
mhz = 369
cardmhz = 369
ident =
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100


[reader]
label = tnk
enable = 1
protocol = smartreader
device = 002:004
services = tnk
caid = 0B00
detect = cd
mhz = 480
cardmhz = 357
ident = 0B00:000000
group = 3
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100

oscam.config

Spoiler

[global]
LogFile = /var/log/ipc/OScam.log
maxlogsize = 4096
nice = -1
PreferLocalCards = 1
WaitForCards = 1
cachedelay = 120

[newcamd]
port = 22000@1702:000000; 22001@1843:000000,003411,008011; 22002@0B00:000000
key = 0102030405060708091011121314

#[cccam]
port = 12000
#reshare = 0
version = 2.1.1

[webif]
httpport = 16005
httpuser = xxxxx
httppwd = xxxxxx
httprefresh = 5
httpallowed = 127.0.0.1,192.168.1.0-192.168.255.255

oscam.user

Spoiler

[account]
user = user
pwd = pass
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 2
au = sky
services = skyde,skyall,skywelt,skymusicchoiceextra,skycinema,skysport,skybundesliga,skyselect,skyhd,skyweltextra,bluemovie,skysonstige
caid = 1702,1833
betatunnel = 1833.007A:1702,1833.007B:1702,1833.007C:1702,1833.007E:1702,1833.007F:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702,1833.006F:1702,1833.006A:1702,1833.006B:1702,1833.0069:1702,1833.0070:1702,1833.0071:1702,1702.0001:007A,1702:007B,1702:007C,1702:007E,1702:007F,1702:0080,1702:0081,1702:0082,1702:0083,1702:0084,1702:006F,1702:006A,1702:006B,1702:0069,1702:0070,1702:0071,007A:0001,007B,007C,007E,007F,0080,0081,0082,0083,0084,006F,006A,006B,0069,0070,0071,0001
ident = 1833:000000,1F1F1F
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = user1
pwd = pass1
disabled = 0
expdate =
group = 2
hostname =
uniq = 0
sleep = 0
monlevel = 2
au = hd+
services = hdplus
caid = 1843
betatunnel =
ident = 1843:000000,003411,008011
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = user2
pwd = pass2
disabled = 0
expdate =
group = 3
hostname =
uniq = 1
sleep = 0
monlevel = 2
au = tnk
services = tnk
caid = 0B00
betatunnel =
ident =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

Ich habe auch schon unter oscam.server den protocol als mouse eingestellt.
Bei oscam web info steht hd+ als ERROR.

Ich bin seid zwei Tagen dran und bekomme nicht hin.
Hat einer von Euch eine Idee

Gruß cobra

 

[Kermit]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Hallo cobra,

leider hast du dein Logfile etwas zu früh beschnitten.

2012/02/20 9:04:24 1381 s reader started (pid=1386, device=Serial:Reader 7E1A78A, detect=cd, mhz=369, cardmhz=369)
2012/02/20 9:04:24 1386 r03 Found reader with serial Reader 7E1A78A at 002:002
2012/02/20 9:04:24 1386 r03 Found smartreader device Serial:Reader 7E1A78A
2012/02/20 9:04:24 1386 r03 card detected
2012/02/20 9:04:28 1386 r03 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/02/20 9:04:28 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/02/20 9:04:30 1386 r03 detect native nagra card

Das ist alles was in deinem Log steht bzgl des angesprochenen Readers. Die eigentliche Fehlermeldung von OScam fehlt.
Ich selber habe jetzt keinen Fehler in deiner Konfig sehen können.

Grüße

Kermit

 

[cobra2005]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Hier nochmal die oscam.log
Das ist alles was ich bekomme es ist jetzt komplett.

Spoiler

>> OSCam << cardserver started at Mon Feb 20 09:04:24 2012
-------------------------------------------------------------------------------
2012/02/20 9:04:24 1366 s version=0.99.4svn, build #3035, system=i686-pc-linux, nice=-1
2012/02/20 9:04:24 1366 s max. clients=509, client max. idle=120 sec
2012/02/20 9:04:24 1366 s max. logsize=4096 Kb
2012/02/20 9:04:24 1366 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/02/20 9:04:24 1366 s shared memory initialized (size=4338546, id=0)
2012/02/20 9:04:24 1366 s auth size=4772
2012/02/20 9:04:24 1366 s services reloaded: 0 services freed, 14 services loaded
2012/02/20 9:04:24 1366 s userdb reloaded: 0 accounts freed, 3 accounts loaded, 0 expired, 0 disabled
2012/02/20 9:04:24 1366 s signal handling initialized (type=sysv)
2012/02/20 9:04:24 1366 s 255 service-id's loaded
2012/02/20 9:04:24 1366 s 11 tier-id's loaded
2012/02/20 9:04:24 1366 s 1 provid's loaded
2012/02/20 9:04:24 1381 s monitor: disabled
2012/02/20 9:04:24 1381 s camd 3.3x: disabled
2012/02/20 9:04:24 1381 s camd 3.5x: disabled
2012/02/20 9:04:24 1381 s cs378x: disabled
2012/02/20 9:04:24 1381 s newcamd: initialized (fd=6, port=22000, crypted)
2012/02/20 9:04:24 1381 s CAID: 1702
2012/02/20 9:04:24 1381 s provid #0: 000000
2012/02/20 9:04:24 1381 s newcamd: initialized (fd=7, port=22001, crypted)
2012/02/20 9:04:24 1381 s CAID: 1843
2012/02/20 9:04:24 1381 s provid #0: 000000
2012/02/20 9:04:24 1381 s provid #1: 003411
2012/02/20 9:04:24 1381 s provid #2: 008011
2012/02/20 9:04:24 1381 s newcamd: initialized (fd=8, port=22002, crypted)
2012/02/20 9:04:24 1381 s CAID: 0B00
2012/02/20 9:04:24 1381 s provid #0: 000000
2012/02/20 9:04:24 1381 s cccam: disabled
2012/02/20 9:04:24 1381 s radegast: disabled
2012/02/20 9:04:24 1381 s logger started (pid=1383)
2012/02/20 9:04:24 1381 s http started (pid=1384)
2012/02/20 9:04:24 1381 s reader started (pid=1385, device=Serial:Reader 209, detect=cd, mhz=600, cardmhz=600)
2012/02/20 9:04:24 1381 s reader started (pid=1386, device=Serial:Reader 7E1A78A, detect=cd, mhz=369, cardmhz=369)
2012/02/20 9:04:24 1381 s reader started (pid=1387, device=002:004, detect=cd, mhz=480, cardmhz=357)
2012/02/20 9:04:24 1384 h HTTP Server listening on port 16005
2012/02/20 9:04:24 1381 s waiting for local card init
2012/02/20 9:04:24 1387 r04 Found smartreader device 002:004
2012/02/20 9:04:24 1386 r03 Found reader with serial Reader 7E1A78A at 002:002
2012/02/20 9:04:24 1385 r02 Found reader with serial Reader 209 at 002:003
2012/02/20 9:04:24 1385 r02 Found smartreader device Serial:Reader 209
2012/02/20 9:04:24 1386 r03 Found smartreader device Serial:Reader 7E1A78A
2012/02/20 9:04:24 1387 r04 card detected
2012/02/20 9:04:24 1385 r02 card detected
2012/02/20 9:04:24 1386 r03 card detected
2012/02/20 9:04:26 1387 r04 ATR: 3B .............. 30
2012/02/20 9:04:26 1387 r04 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2012/02/20 9:04:27 1387 r04 type: Conax, caid: 0B00, serial: 2............3, hex serial: ................, card: v64
2012/02/20 9:04:27 1387 r04 Providers: 1
2012/02/20 9:04:27 1387 r04 Provider: 1 Provider-Id: 000000
2012/02/20 9:04:27 1387 r04 Provider: 1 SharedAddress: 0...........B
2012/02/20 9:04:27 1387 r04 Package: 1, id: 1010, date: 2012/02/01 - 2012/02/29, name: TVN
2012/02/20 9:04:28 1387 r04 [conax-reader] ready for requests
2012/02/20 9:04:28 1386 r03 ATR: 3F ..................... 28
2012/02/20 9:04:28 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/02/20 9:04:30 1386 r03 detect native nagra card
2012/02/20 9:04:30 1385 r02 ATR: 3B .................. 6D
2012/02/20 9:04:31 1385 r02 Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2012/02/20 9:04:32 1385 r02 detect irdeto tunneled nagra card
2012/02/20 9:04:32 1385 r02 no rsa key configured -> using irdeto mode
2012/02/20 9:04:32 1385 r02 detect irdeto card
2012/02/20 9:04:32 1385 r02 caid: 1702, acs: 3.84, country code: GER
2012/02/20 9:04:32 1385 r02 providers: 4, ascii serial: 0........2, hex serial: 7..........2, hex base: 1A
2012/02/20 9:04:35 1385 r02 active providers: 2 (000000,000000)
2012/02/20 9:04:35 1385 r02 entitlements for provider: 2, id: 000000
2012/02/20 9:04:35 1385 r02 chid: 0107, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 0108, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 7D2B, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 7D24, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 7D23, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:35 1385 r02 chid: 61BD, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 04BA, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 04C4, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 7D2C, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 7D2D, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 7D22, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03FF, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 05DC, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03F4, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03EC, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03EF, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03E9, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03ED, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03F3, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:35 1385 r02 chid: 03F5, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03EB, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03F6, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03F9, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0401, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0402, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03F7, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0403, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0404, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03FA, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 041A, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 000F, date: 2011/02/20 - 2011/11/01
2012/02/20 9:04:36 1385 r02 chid: 7D21, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03DE, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03DF, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0400, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03F1, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03EA, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 03F2, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 7D27, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:36 1385 r02 chid: 03FD, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 00F0, date: 2011/02/20 - 2011/11/01
2012/02/20 9:04:36 1385 r02 chid: 03E8, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0514, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 044C, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 00F5, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0069, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0102, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 026C, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 028B, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 028C, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 028D, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 028E, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 028F, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0290, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 029E, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0291, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0292, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0293, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0294, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:36 1385 r02 chid: 0295, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 028A, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0298, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0299, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 029A, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 029B, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 029D, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0103, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 029C, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0104, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0406, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0105, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 0004, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:37 1385 r02 chid: 05FB, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:37 1385 r02 chid: 05F2, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:37 1385 r02 chid: 04CE, date: 2011/02/20 - 2011/11/01
2012/02/20 9:04:37 1385 r02 chid: 0605, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:37 1385 r02 chid: 05F1, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:37 1385 r02 chid: 05DD, date: 2011/02/20 - 2011/11/01
2012/02/20 9:04:37 1385 r02 chid: 05FC, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 chid: 05DF, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 chid: 0609, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 chid: 0276, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 chid: 05DE, date: 2011/02/20 - 2011/11/01
2012/02/20 9:04:38 1385 r02 chid: 05E8, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 chid: 05E7, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 chid: 0515, date: 2008/01/19 - 2008/01/21
2012/02/20 9:04:38 1385 r02 chid: 0606, date: 2011/10/12 - 2012/04/05
2012/02/20 9:04:38 1385 r02 [irdeto-reader] ready for requests
2012/02/20 9:04:42 1386 r03 card system not supported
2012/02/20 9:04:42 1386 r03 Normal mode failed, reverting to Deprecated Mode
2012/02/20 9:04:45 1386 r03 ATR: 3F.................................... 28
2012/02/20 9:04:46 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/02/20 9:04:48 1386 r03 detect native nagra card
2012/02/20 9:05:00 1386 r03 card system not supported
2012/02/20 9:05:00 1386 r03 card initializing error
2012/02/20 9:05:00 1381 s init for all local cards done
2012/02/20 9:05:00 1381 s anti cascading disabled
2012/02/20 9:05:00 1381 s dvbapi: dvbapi disabled
2012/02/20 9:05:00 1381 s client(1) connect from 127.0.0.1 (pid=1421, pipfd=16)
2012/02/20 9:05:00 1381 s client(2) connect from 127.0.0.1 (pid=1422, pipfd=17)
2012/02/20 9:05:00 1381 s client(3) connect from 127.0.0.1 (pid=1423, pipfd=18)
2012/02/20 9:05:00 1381 s client(4) connect from 127.0.0.1 (pid=1424, pipfd=19)
2012/02/20 9:05:00 1381 s client(5) connect from 127.0.0.1 (pid=1425, pipfd=20)
2012/02/20 9:05:00 1381 s client(6) connect from 127.0.0.1 (pid=1426, pipfd=21)
2012/02/20 9:05:00 1381 s client(7) connect from 127.0.0.1 (pid=1427, pipfd=22)
2012/02/20 9:05:00 1422 c02 Connection closed to client
2012/02/20 9:05:00 1423 c03 Connection closed to client
2012/02/20 9:05:00 1424 c04 Connection closed to client
2012/02/20 9:05:00 1425 c05 Connection closed to client
2012/02/20 9:05:00 1421 c01 Connection closed to client
2012/02/20 9:05:00 1426 c06 Connection closed to client
2012/02/20 9:05:00 1381 s client(8) connect from 127.0.0.1 (pid=1428, pipfd=23)
2012/02/20 9:05:00 1428 c08 encrypted newcamd:22001-client 127.0.0.1 granted (user1, au=hd+)
2012/02/20 9:05:00 1428 c08 user user1 authenticated successfully (CCcam)
2012/02/20 9:05:00 1428 c08 AU wont be used on this port -> disable AU
2012/02/20 9:05:00 1427 c07 Connection closed to client
2012/02/20 9:05:01 1381 s client(1) connect from 127.0.0.1 (pid=1450, pipfd=16)
2012/02/20 9:05:01 1450 c01 encrypted newcamd:22002-client 127.0.0.1 granted (user2, au=tnk)
2012/02/20 9:05:01 1450 c01 user user2 authenticated successfully (CCcam)
2012/02/20 9:05:01 1450 c01 AU enabled for user user2 on reader tnk
2012/02/20 9:05:07 1381 s client(2) connect from 127.0.0.1 (pid=1451, pipfd=17)
2012/02/20 9:05:07 1451 c02 encrypted newcamd:22000-client 127.0.0.1 granted (user, au=sky)
2012/02/20 9:05:07 1451 c02 user user authenticated successfully (CCcam)
2012/02/20 9:05:07 1451 c02 AU enabled for user user on reader sky
2012/02/20 9:05:07 1451 c02 no valid PROVID(s) found in CAID for user 'user'
2012/02/20 9:49:57 1386 r03 card detected
2012/02/20 9:49:59 1451 c02 user (1702&000000/007C/93:9A67): found (682 ms) by sky
2012/02/20 9:50:00 1386 r03 ATR is malformed, it reports 15 historical bytes but there are only 13
2012/02/20 9:50:00 1386 r03 ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30
2012/02/20 9:50:01 1386 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.69 Mhz
2012/02/20 9:50:03 1386 r03 detect native nagra card
2012/02/20 9:50:03 1451 c02 user (1702&000000/0081/93:0EA5): found (676 ms) by sky
2012/02/20 9:50:06 1451 c02 user (1702&000000/007C/93:9B5D): found (679 ms) by sky
2012/02/20 9:50:10 1451 c02 user (1702&000000/0081/93:94AC): found (676 ms) by sky
2012/02/20 9:50:13 1451 c02 user (1702&000000/007C/93:65C5): found (681 ms) by sky
2012/02/20 9:50:15 1386 r03 card system not supported
2012/02/20 9:50:15 1386 r03 Normal mode failed, reverting to Deprecated Mode
2012/02/20 9:50:17 1451 c02 user (1702&000000/0081/93:3452): found (674 ms) by sky
2012/02/20 9:50:18 1386 r03 ATR: 3F ...................................
2012/02/20 9:50:20 1451 c02 user (1702&000000/007C/93:3EDF): found (678 ms) by sky
2012/02/20 9:50:20 1386 r03 detect native nagra card
2012/02/20 9:50:24 1451 c02 user (1702&000000/0081/93:AAAF): found (676 ms) by sky
2012/02/20 9:50:27 1451 c02 user (1702&000000/007C/93:6A07): found (684 ms) by sky
2012/02/20 9:50:31 1451 c02 user (1702&000000/0081/93:F784): found (677 ms) by sky
2012/02/20 9:50:32 1386 r03 card system not supported
2012/02/20 9:50:32 1386 r03 card initializing error

 

[Kermit]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Als aller erstes editiere mal dein Posting und mach die SN der Karten unkenntlich!

Mh sehr seltsam - ich kann jetzt nur von einem Igel ausgehen und der ist in Bezug auf die Stromversorgung an den USB Ports nicht der Beste. Kannst du mal versuchen den betreffenden Reader an einen aktiven USB Hub zu hängen?

Ein anderer Versuch wäre OScam zu starten mit Reader aber ohne eingesteckte Karte und erst wenn OScam läuft die Karte einstecken....


Edit: Ich bin betriebsblind :-(
Du verwendest eine Readereinstellung die nicht zu deiner OScam Version passt!
Mach mal ein update auf eine aktuelle Version oder füge bei den Keys ein r3_ vor den Einträgen rsa und boxkey ein (IIRC)

Grüße

Kermit

 

[Zeerith]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Hatte ein ähnliches Problem mit meinem Smargo und der schwarzen HD+ Karte.

Lief bei mir nur nach dem ich die Cardmhz hochgesetzt hatte auf 6Mhz. Kannst du ja mal Probieren.

[reader]
label = hd+
enable = 1
protocol = smartreader
device = Serial:Reader 7E1A78A
services = hdplus
smargopatch = 1
caid = 1843
rsakey = BF.....D5
boxkey = A......C
detect = cd
mhz = 369
cardmhz = 600
ident =
group = 2
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100

Gruss
Zeerith

 

[meister85]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Als aller erstes editiere mal dein Posting und mach die SN der Karten unkenntlich!

Mh sehr seltsam - ich kann jetzt nur von einem Igel ausgehen und der ist in Bezug auf die Stromversorgung an den USB Ports nicht der Beste. Kannst du mal versuchen den betreffenden Reader an einen aktiven USB Hub zu hängen?

Ein anderer Versuch wäre OScam zu starten mit Reader aber ohne eingesteckte Karte und erst wenn OScam läuft die Karte einstecken....


Edit: Ich bin betriebsblind :-(
Du verwendest eine Readereinstellung die nicht zu deiner OScam Version passt!
Mach mal ein update auf eine aktuelle Version oder füge bei den Keys ein r3_ vor den Einträgen rsa und boxkey ein (IIRC)

Grüße

Kermit

Wenn er auf eine aktuelle updatet darf er nicht das n3_ davor machen....

Nur wenn er auf diese Version bleiben möchte, muss er das n3_ davor tun....

 

[cobra2005]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Hallo
Es will nicht funktionieren mit n3_
Update gemacht auf neue version will auch nicht (natürlich ohne n3_)
cardmhz = 600 will auch nicht

Ich weiss es nicht mehr, habe versucht mit smartmouse will aber auch nicht.

Gruß

 

[meister85]

AW: Problem mit Smargo und HD+ schwarze Karte. Bitte um Hilfe

Hast du mal geprüft ob der Box- und RSA Key richtig ist (bitte nicht hier posten!) ???

Ansonsten mal versuchen den Protokoll auf mouse zu ändern und direkt per ttyUSB... ansprechen!