gelöst Problem mit HD05

[maxlikesmc]

Hallo zusammen,

ich versuche mit seit Wochen an der OSCam Installation.

Ich habe den Docker Container von OSCam benutz und meinen. Reader (Smart Mouse 2) durchgereicht.

laut Log wird die Karte auch erkannt. (Die Karte ist noch neu aus der Packung)

• Spoiler: LOG

  2022/01/10 21:16:22 00000000 s (main) System name = Linux
  [*]2022/01/10 21:16:22 00000000 s (main) Host name = 731dc7e86a1a
  [*]2022/01/10 21:16:22 00000000 s (main) Release = 5.4.0-92-generic
  [*]2022/01/10 21:16:22 00000000 s (main) Version = #103-Ubuntu SMP Fri Nov 26 16:13:00 UTC 2021
  [*]2022/01/10 21:16:22 00000000 s (main) Machine = x86_64
  [*]2022/01/10 21:16:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2683
  [*]2022/01/10 21:16:22 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  [*]2022/01/10 21:16:22 00000000 s (main) signal handling initialized
  [*]2022/01/10 21:16:22 00000000 s (reader) HD05 [mouse] creating thread for device /dev/ttyUSB0
  [*]2022/01/10 21:16:22 00000000 s (main) waiting for local card init
  [*]2022/01/10 21:16:22 1BE4AB50 h (webif) webif: decompressed 185200 bytes back into 487488 bytes
  [*]2022/01/10 21:16:22 1BE4AB50 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
  [*]2022/01/10 21:16:22 1D30195E r (reader) HD05 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
  [*]2022/01/10 21:16:23 1D30195E r (reader) HD05 [mouse] card detected
  [*]2022/01/10 21:16:27 1D30195E r (reader) HD05 [mouse] Error activating card.
  [*]2022/01/10 21:16:36 1D30195E r (-) -- Skipped 2 duplicated log lines --
  [*]2022/01/10 21:16:36 1D30195E r (reader) HD05 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  [*]2022/01/10 21:16:36 1D30195E r (reader) HD05 [mouse] card initializing error
  [*]2022/01/10 21:16:37 00000000 s (main) init for all local cards done
  [*]2022/01/10 21:16:37 00000000 s (emmcache) loaded 0 emmcache records from /config/oscam/oscam.emmcache in 0 ms
  [*]2022/01/10 21:16:37 00000000 s (emmcache) loaded 0 emmstat records from /config/oscam/oscam.emmstat in 0 ms
  [*]2022/01/10 21:16:37 00000000 s (anticasc) anti cascading disabled
  [*]2022/01/10 21:16:37 00000000 s (gbox) local gbox failed init
  [*]2022/01/10 21:16:37 12545048 c (client) plain dvbapi-client granted (tvheadend, au=auto (1 reader))
  [*]2022/01/10 21:16:37 12545048 c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
  [*]2022/01/10 21:16:37 12545048 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

meine Konfiguration von den OSCAM Files ist analog zu digital-eliteboard.com/threads/hd-hd05-karte-in-smartmouse-aktivieren-mit-oscam.493929/

wenn ihr die Config noch benötigt kann ich Sie aber gerne noch anhängen.
Ich hoffe ihr könnt mir helfen.

Vielen Dank im Voraus!

 

[MKLST2]

[*]2022/01/10 21:16:36 1D30195E r (reader) HD05 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

Deine Karte wird nicht richtig eingelesen. Poste die kompletten Configs in Spoilern + Log bis Senderabfrage ...

 

[maxlikesmc]

Spoiler: Oscam.conf

[global]
logfile = /var/log/oscam.log
maxlogsize = 2048
emmlogdir=/var/log/oscam-emm/

[cache]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
listen_port = 9000
user = tvheadend
boxtype = pc

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httphideidleclients = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Spoiler: Oscam.dvbapi

P: 186A
I: 0

Spoiler: Oscam.server

[reader]
label = HD05
description = HD05
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 186A
mod1 = 9D..63
data50 = B6..92
mod50 = DB..D5
key60 = 99..EB
exp60 = 26..21
nuid = 84..1E
cwekey = 1B..C6
detect = cd
nagra_read = 2
detect_seca_nagra_tunneled_card= 0
group = 1
emmcache = 1,1,31,0
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

Spoiler: Oscam.user

[account]
user = tvheadend
pwd =
monlevel = 4
au = 1
group = 1

~

Spoiler: LOG

LOG

• 2022/01/10 21:16:22 00000000 s (main) System name = Linux
• 2022/01/10 21:16:22 00000000 s (main) Host name = 731dc7e86a1a
• 2022/01/10 21:16:22 00000000 s (main) Release = 5.4.0-92-generic
• 2022/01/10 21:16:22 00000000 s (main) Version = #103-Ubuntu SMP Fri Nov 26 16:13:00 UTC 2021
• 2022/01/10 21:16:22 00000000 s (main) Machine = x86_64
• 2022/01/10 21:16:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2683
• 2022/01/10 21:16:22 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2022/01/10 21:16:22 00000000 s (main) signal handling initialized
• 2022/01/10 21:16:22 00000000 s (reader) HD05 [mouse] creating thread for device /dev/ttyUSB0
• 2022/01/10 21:16:22 00000000 s (main) waiting for local card init
• 2022/01/10 21:16:22 1BE4AB50 h (webif) webif: decompressed 185200 bytes back into 487488 bytes
• 2022/01/10 21:16:22 1BE4AB50 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2022/01/10 21:16:22 1D30195E r (reader) HD05 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
• 2022/01/10 21:16:23 1D30195E r (reader) HD05 [mouse] card detected
• 2022/01/10 21:16:27 1D30195E r (reader) HD05 [mouse] Error activating card.
• 2022/01/10 21:16:36 1D30195E r (-) -- Skipped 2 duplicated log lines --
• 2022/01/10 21:16:36 1D30195E r (reader) HD05 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
• 2022/01/10 21:16:36 1D30195E r (reader) HD05 [mouse] card initializing error
• 2022/01/10 21:16:37 00000000 s (main) init for all local cards done
• 2022/01/10 21:16:37 00000000 s (emmcache) loaded 0 emmcache records from /config/oscam/oscam.emmcache in 0 ms
• 2022/01/10 21:16:37 00000000 s (emmcache) loaded 0 emmstat records from /config/oscam/oscam.emmstat in 0 ms
• 2022/01/10 21:16:37 00000000 s (anticasc) anti cascading disabled
• 2022/01/10 21:16:37 00000000 s (gbox) local gbox failed init
• 2022/01/10 21:16:37 12545048 c (client) plain dvbapi-client granted (tvheadend, au=auto (1 reader))
• 2022/01/10 21:16:37 12545048 c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
• 2022/01/10 21:16:37 12545048 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

Ich hoffe das hilft schon weiter.

Das Log File bis zum Auflauf kann ich leider erst später liefern, da ich aktuell meinen TVH neu aufsetze.

Vielen Dank für eure Hilfe!

 

[Kind regards]

mhz                           = 369
cardmhz                       = 369

Nagra Karten haben diese Einstellungen gern ...

 

[maxlikesmc]

Hat leider nichts gebracht. Ich gehe davon aus die Parameter gehören in die Oscam.server Datei.
anbei nochmal ein aktueller LOG Auszug:

• Spoiler: LOG

  2022/01/11 18:50:50 00000000 s (main) System name = Linux
  [*]2022/01/11 18:50:50 00000000 s (main) Host name = 731dc7e86a1a
  [*]2022/01/11 18:50:50 00000000 s (main) Release = 5.4.0-92-generic
  [*]2022/01/11 18:50:50 00000000 s (main) Version = #103-Ubuntu SMP Fri Nov 26 16:13:00 UTC 2021
  [*]2022/01/11 18:50:50 00000000 s (main) Machine = x86_64
  [*]2022/01/11 18:50:50 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 81577
  [*]2022/01/11 18:50:50 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  [*]2022/01/11 18:50:50 00000000 s (main) signal handling initialized
  [*]2022/01/11 18:50:50 00000000 s (reader) HD05 [mouse] creating thread for device /dev/ttyUSB0
  [*]2022/01/11 18:50:50 00000000 s (main) waiting for local card init
  [*]2022/01/11 18:50:50 1BE4AB50 h (webif) webif: decompressed 185200 bytes back into 487488 bytes
  [*]2022/01/11 18:50:50 1BE4AB50 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
  [*]2022/01/11 18:50:51 1D30195E r (reader) HD05 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
  [*]2022/01/11 18:50:51 1D30195E r (reader) HD05 [mouse] card detected
  [*]2022/01/11 18:50:55 1D30195E r (reader) HD05 [mouse] Error activating card.
  [*]2022/01/11 18:51:05 1D30195E r (-) -- Skipped 2 duplicated log lines --
  [*]2022/01/11 18:51:05 1D30195E r (reader) HD05 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  [*]2022/01/11 18:51:05 1D30195E r (reader) HD05 [mouse] card initializing error
  [*]2022/01/11 18:51:06 00000000 s (main) init for all local cards done
  [*]2022/01/11 18:51:06 00000000 s (emmcache) loaded 0 emmcache records from /config/oscam/oscam.emmcache in 0 ms
  [*]2022/01/11 18:51:06 00000000 s (emmcache) loaded 0 emmstat records from /config/oscam/oscam.emmstat in 0 ms
  [*]2022/01/11 18:51:06 00000000 s (anticasc) anti cascading disabled
  [*]2022/01/11 18:51:06 00000000 s (gbox) local gbox failed init
  [*]2022/01/11 18:51:06 078B356E c (client) plain dvbapi-client granted (tvheadend, au=auto (1 reader))
  [*]2022/01/11 18:51:06 078B356E c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
  [*]2022/01/11 18:51:06 078B356E c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

 

[dewildschwein500]

Hi @maxlikesmc,
ist die Karte richtig herum im Reader und wie sind die Schalterstellungen der "Smart Mouse 2"?

 

[maxlikesmc]

Hi @maxlikesmc,
ist die Karte richtig herum im Reader und wie sind die Schalterstellungen der "Smart Mouse 2"?

Hi,

ich denke ja so wie sie aktuell drin ist blinkt der Leser andersrum gar nicht.

Die Einstellung sind wie folgt:

5V
Phönix
->
6MHz

 

[rtznfrtz]

lese ich das richtig ? Du initialisierst mit --> Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369) und hast den switch auf --> 6 mhz?

wenn ja, dann stell' den switch am leser auf 357 und starte neu

 

[dewildschwein500]

Hi @maxlikesmc,

ich betreibe die HD05 mit diesen Schalterstellungen:
5V (unten)
Phonix (unten)
3,479MHz (unten)
Y5 (unten)

Spoiler: Schalter-Einstellungen

Du musst Regestriert sein, um das angehängte Bild zusehen.

Spoiler: oscam.server Reader

[reader]
enable = 1
label = Extern_easymouse_HD05
protocol = mouse
device = /dev/hdplus05
caid = 186A
mod1 = 9D..63 # Zensierter Wert
data50 = B6..92 # Zensierter Wert
mod50 = DB..D5 # Zensierter Wert
key60 = 99..EB # Zensierter Wert
exp60 = 26..21 # Zensierter Wert
nuid = 84..1E # Zensierter Wert
cwekey = 1B..C6 # Zensierter Wert
detect = cd
nagra_read = 2
detect_seca_nagra_tunneled_card= 0
autospeed = 1
group = 1
writeslastglobalbeforeshared = 0
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 0
blockemm-s = 0

Nachtrag: Welches Docker-Image nutzt du und mit welchen Einstellungen startest du den Container?

 

[maxlikesmc]

Ich denke wir kommen der Sache näher

• Spoiler: LOG

  2022/01/11 21:26:51 00000000 s (main) System name = Linux
  [*]2022/01/11 21:26:51 00000000 s (main) Host name = 731dc7e86a1a
  [*]2022/01/11 21:26:51 00000000 s (main) Release = 5.4.0-92-generic
  [*]2022/01/11 21:26:51 00000000 s (main) Version = #103-Ubuntu SMP Fri Nov 26 16:13:00 UTC 2021
  [*]2022/01/11 21:26:51 00000000 s (main) Machine = x86_64
  [*]2022/01/11 21:26:51 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 289
  [*]2022/01/11 21:26:51 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  [*]2022/01/11 21:26:51 00000000 s (main) signal handling initialized
  [*]2022/01/11 21:26:51 00000000 s (reader) HD05 [mouse] creating thread for device /dev/ttyUSB0
  [*]2022/01/11 21:26:51 00000000 s (main) waiting for local card init
  [*]2022/01/11 21:26:51 192583D5 h (webif) webif: decompressed 185200 bytes back into 487488 bytes
  [*]2022/01/11 21:26:51 192583D5 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
  [*]2022/01/11 21:26:51 7FCF83EA r (reader) HD05 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
  [*]2022/01/11 21:26:52 7FCF83EA r (reader) HD05 [mouse] card detected
  [*]2022/01/11 21:26:53 7FCF83EA r (reader) HD05 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 35 30 20 52 65 76 57 36 30 14
  [*]2022/01/11 21:26:53 7FCF83EA r (reader) HD05 [mouse] Setting baudrate to 115312 bps
  [*]2022/01/11 21:26:54 7FCF83EA r (reader) HD05 [mouse] detected nagra merlin card in CAK7 mode
  [*]2022/01/11 21:26:55 7FCF83EA r (reader) HD05 [mouse] Rom revision: DNASP450 RevW60
  [*]2022/01/11 21:26:55 7FCF83EA r (reader) HD05 [mouse] ERROR: Not all required CAK7 parameters are set!
  [*]2022/01/11 21:26:55 7FCF83EA r (reader) HD05 [mouse] card system not supported
  [*]2022/01/11 21:26:55 7FCF83EA r (reader) HD05 [mouse] Normal mode failed, reverting to Deprecated Mode
  [*]2022/01/11 21:26:55 7FCF83EA r (reader) HD05 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  [*]2022/01/11 21:26:55 7FCF83EA r (reader) HD05 [mouse] card initializing error
  [*]2022/01/11 21:26:55 00000000 s (main) init for all local cards done
  [*]2022/01/11 21:26:55 00000000 s (emmcache) loaded 0 emmcache records from /config/oscam/oscam.emmcache in 0 ms
  [*]2022/01/11 21:26:55 00000000 s (emmcache) loaded 0 emmstat records from /config/oscam/oscam.emmstat in 0 ms
  [*]2022/01/11 21:26:55 00000000 s (anticasc) anti cascading disabled
  [*]2022/01/11 21:26:55 00000000 s (gbox) local gbox failed init
  [*]2022/01/11 21:26:55 707ECED0 c (client) plain dvbapi-client granted (tvheadend, au=auto (1 reader))
  [*]2022/01/11 21:26:55 707ECED0 c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
  [*]2022/01/11 21:26:55 707ECED0 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

 

[dewildschwein500]

Hi,
Welche OSCam-Version kommt zum Einsatz?
Welches Docker-Image nutzt du?
Mit welchen Einstellungen startest du den Container?

 

[ramsesurenkel]

ich habe eine hd 02

bei dir steht im server

emmcache = 1,1,31,0 kann es sein dass statt 31 vielleicht nur ne 3 da stehen muss..... vielleicht komma verrutscht ???

 

[dewildschwein500]

Hi @ramsesurenkel,
emmcache = 1,1,31,0 ist durchaus gültig ... Egal wie die Einstellung zur Zeit ist, die hat mit dem Einlesen der Karte nichts zu tun; sprich an der Einstellung was ändern hilft zur Zeit nicht weiter.

 

[ramsesurenkel]

erschien mir nur etwas hoch.....

 

[maxlikesmc]

HI,
habe die Oscam.server von @dewildschwein500 benutzt.
Anbei nochmal das aktuelle LOG

• Spoiler: LOG

  2022/01/11 21:45:12 00000000 s (main) System name = Linux
  [*]2022/01/11 21:45:12 00000000 s (main) Host name = 731dc7e86a1a
  [*]2022/01/11 21:45:12 00000000 s (main) Release = 5.4.0-92-generic
  [*]2022/01/11 21:45:12 00000000 s (main) Version = #103-Ubuntu SMP Fri Nov 26 16:13:00 UTC 2021
  [*]2022/01/11 21:45:12 00000000 s (main) Machine = x86_64
  [*]2022/01/11 21:45:12 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1677
  [*]2022/01/11 21:45:12 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  [*]2022/01/11 21:45:12 00000000 s (main) signal handling initialized
  [*]2022/01/11 21:45:12 00000000 s (reader) Extern_easymouse_HD05 [mouse] creating thread for device /dev/ttyUSB0
  [*]2022/01/11 21:45:12 00000000 s (main) waiting for local card init
  [*]2022/01/11 21:45:12 1E9E162A h (webif) webif: decompressed 185200 bytes back into 487488 bytes
  [*]2022/01/11 21:45:12 1E9E162A h (webif) HTTP Server running. ip=0.0.0.0 port=8888
  [*]2022/01/11 21:45:12 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
  [*]2022/01/11 21:45:13 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] card detected
  [*]2022/01/11 21:45:14 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 35 30 20 52 65 76 57 36 30 14
  [*]2022/01/11 21:45:14 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] Setting baudrate to 111600 bps
  [*]2022/01/11 21:45:14 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] detected nagra merlin card in CAK7 mode
  [*]2022/01/11 21:45:15 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] Rom revision: DNASP450 RevW60
  [*]2022/01/11 21:45:15 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] ERROR: Not all required CAK7 parameters are set!
  [*]2022/01/11 21:45:15 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] card system not supported
  [*]2022/01/11 21:45:15 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] Normal mode failed, reverting to Deprecated Mode
  [*]2022/01/11 21:45:15 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  [*]2022/01/11 21:45:15 0AB59F1E r (reader) Extern_easymouse_HD05 [mouse] card initializing error
  [*]2022/01/11 21:45:16 00000000 s (main) init for all local cards done
  [*]2022/01/11 21:45:16 00000000 s (emmcache) loaded 0 emmcache records from /config/oscam/oscam.emmcache in 0 ms
  [*]2022/01/11 21:45:16 00000000 s (emmcache) loaded 0 emmstat records from /config/oscam/oscam.emmstat in 0 ms
  [*]2022/01/11 21:45:16 00000000 s (anticasc) anti cascading disabled
  [*]2022/01/11 21:45:16 00000000 s (gbox) local gbox failed init
  [*]2022/01/11 21:45:16 4EE2EAF1 c (client) plain dvbapi-client granted (tvheadend, au=auto (1 reader))
  [*]2022/01/11 21:45:16 4EE2EAF1 c (dvbapi) dvbapi channelcache loaded from /config/oscam/oscam.ccache
  [*]2022/01/11 21:45:16 4EE2EAF1 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11

Ich benutze folgendes Image:

Sie müssen registriert sein, um Links zu sehen.

OSCAM Version
OSCam: 1.20_svn Build: r11704

Startparameter
docker run -d \
--name=oscam \
-e PUID=1000 \
-e PGID=1000 \
-e TZ=Europe/London \
-p 8888:8888 \
-v oscam_data:/config \
--device /dev/ttyUSB0:/dev/ttyUSB0 \
--restart unless-stopped \
lscr.io/linuxserver/oscam

Ich hoffe ich habe alles zusammen

Vielen Dank schonmal wieder