Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenloses um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereiche, welche für Gäste verwehrt bleiben

PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

semico

Freak
Registriert
17. November 2009
Beiträge
227
Reaktionspunkte
90
Punkte
88
Ort
Hier... und nicht da
Hallo zusammen hier das neue PKT Image für die IPBoxen/ Vizyon etc.

Wie ich finde eines der besten Images für IPBoxen.



PKT E2 NEBULA v3 image For IPBOX 9000/910/900/91HD


Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie


Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
clear vfd in deepstandby
support vfd & led settings in standby
fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
fix playlist playing
fix FPS detection
fix text delay
added adjustment of text speed
fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume /- key functionality fix
[SF918G /SF1008SE ] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008 /SF918 /UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and " " on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability

Special THX to TDT

FTP login: root, passwd: pkteam


IPBOX 91
FLASH VERSION: Link ist nicht mehr aktiv.

USB VERSION: Link ist nicht mehr aktiv.

IPBOX 900
FLASH VERSION: Link ist nicht mehr aktiv.

USB VERSION: Link ist nicht mehr aktiv.

IPBOX 910
FLASH VERSION: Link ist nicht mehr aktiv.

USB VERSION: Link ist nicht mehr aktiv.
 
Zuletzt bearbeitet:
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

Moin, Leute!
Nach dem flashen kommt bei mir: load -> wait -> pkt. Bei der pkt Anzeige auf dem Reciever ist auch schluss, tut sich nicht mehr. Ich kenn' mich noch nicht so gut mit enigma aus, hatte vorher PGI drauf. Was soll ich machen damit mein Reciever weiter lädt?
 
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

Das selbe habe ich auf meiner ipbox 900hd auch. Bei der Anzeige PKT SVN-1840 ist ende. Ab und an zuckelt das schwarze Bild aber das wars dann auch.
 
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

Lustig - es ist nur in English, alle anderen Sprachen sind nicht vorhanden (auswählbar, aber nicht im image dabei)
EDIT: Lässt sich ja nachinstallieren....
 
Zuletzt bearbeitet:
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

Wie kann man dort Cams installieren? Herunterladen geht, aber sie sind dann nicht startbar via Emu Manager.
Wie sind dort die Pfade, wo sind die Startskripte für die Cams?
 
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

Probiert mal das aktuelle HDMU Image!
Findet ihr auf der Homepage von Hdmedia Universe!
 
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

gibts ein HDMU Flash img.
 
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

nein gibts keine für ipbox!
 
AW: PKT E2 NEBULA v3 image For IPBOX 910/900/91HD

Gab es jetzt eine Lösung zu der bereits erwähnten Problematik, dass sich nach dem erfolgreichem flashen und der Anzeige PKT-SVN... nichts mehr tut??
 
Zurück
Oben