hansimwurst
Newbie
- Registriert
- 5. Februar 2016
- Beiträge
- 18
- Reaktionspunkte
- 1
- Punkte
- 23
Hi zusammen,
ich habe in der Vergangenheit immer mal wieder den Payload gecheckt. Jetzt scheint das ganze aus irgendeinem Grund nicht mehr zu funktionieren!?
Nach Erhöhung des Debuglevels auf 6 erscheint im Logfile nur noch folgendes:
In der Vergangenheit kam immer folgende Zeile und anschließend der Payload!?
2016/02/14 00:14:59 V14 [videoguard2] Decrypted payload
PAYLOADHEREPAYLOADHEREPAYLOADHEREPAYLOADHEREPAYLOADHEREPAYLOADHERE
ich habe in der Vergangenheit immer mal wieder den Payload gecheckt. Jetzt scheint das ganze aus irgendeinem Grund nicht mehr zu funktionieren!?
Nach Erhöhung des Debuglevels auf 6 erscheint im Logfile nur noch folgendes:
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] ATR: IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] TA1=IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] TA2=IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] 1 protocol types detected. Historical bytes: IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Specific mode: IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Init card protocol IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Setting baudrate to 153600 bps
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Calculated work ETU is 3.88 us
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Protocol: T=0, WWT=230400, Clockrate=6000000
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Setting timings: timeout=230400 ETU, block_delay=0 ETU, char_delay=14 ETU
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2016/02/14 00:14:59 B068C0 r hdplus [nagra] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] type: VideoGuard Sky Germany (098C), baseyear: 2004
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] forced to NDS2
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] write to cardreader
2016/02/14 00:14:59 B6C04DB0 D0 74 01 80 01
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] Answer from cardreader:
2016/02/14 00:14:59 B6C04DB0 AC 90 00
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] write to cardreader
2016/02/14 00:14:59 B6C04DB0 D0 74 01 00 AC
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] Answer from cardreader: und so weiter und so fort....
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] TA1=IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] TA2=IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] 1 protocol types detected. Historical bytes: IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Specific mode: IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Init card protocol IRGENDEINHEXCODE
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Setting baudrate to 153600 bps
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Calculated work ETU is 3.88 us
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Protocol: T=0, WWT=230400, Clockrate=6000000
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] Setting timings: timeout=230400 ETU, block_delay=0 ETU, char_delay=14 ETU
2016/02/14 00:14:58 B6C04DB0 r V14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 6.00 MHz (specified in reader->mhz)
2016/02/14 00:14:59 B068C0 r hdplus [nagra] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] type: VideoGuard Sky Germany (098C), baseyear: 2004
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] forced to NDS2
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] write to cardreader
2016/02/14 00:14:59 B6C04DB0 D0 74 01 80 01
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] Answer from cardreader:
2016/02/14 00:14:59 B6C04DB0 AC 90 00
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] write to cardreader
2016/02/14 00:14:59 B6C04DB0 D0 74 01 00 AC
2016/02/14 00:14:59 B6C04DB0 r V14 [mouse] Answer from cardreader: und so weiter und so fort....
2016/02/14 00:14:59 V14 [videoguard2] Decrypted payload
PAYLOADHEREPAYLOADHEREPAYLOADHEREPAYLOADHEREPAYLOADHEREPAYLOADHERE